My Safari page won't open and I get a message that says "Safari can't find the server"

My Safari won't open and I get a message that says " Safari can't find the server" HELP

Hello Fred5960
If you are having issues with connecting to the internet then check out the articles below to troubleshoot your issue.
Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
http://support.apple.com/kb/ts1843
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

Similar Messages

I can't access the internet from my home wi-fi. It works on other wi-fi, and my wi fi is working on my h ome computer. I keep getting a message that says it can't access the server

I can't access the internet using my home wi-fi. My wi-fi is working on my home computer, and the itouch can access the internet at another person's home using their wi-fi. I've looked in the settings, and can't seem to see any differences.....i'm a techno dummy - so please respond in very basic info

Before resetting try restarting. Or you can go to Settings from the home screen > Wi-Fi > your network and scroll down to 'Renew Lease' and press that. When you do you should see a button labeled 'Renew Lease?' and another labeled 'Cancel'. Select 'Renew Lease'.
You can either back out of that screen back to the home screen or just use the return button to go back to the home screen. Then select Safari and see if you can hook in.
I have to go through that process every five or ten minutes or so when in the second story of our house - weak router signal up there.

Recent Pages update isn't recognized on my MacBook Pro. Tried to open a document I created and I get a message that says I need to update to newer version to open that document. How do I reload the latest update for Pages in Maverick?

After updates to Pages and several other applications I received an update to Mavericks 10.9, all of which were downloaded and uploaded to my MacBook Pro. After the uploads I created a document in Pages which I saved to my folder. Now when I try to open it I get a message that says I need the latest version of Pages to open this document. What do I need to do to reload the last update to Pages so I can open my document?

In both cases you have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Judging from sterling r's response Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 90 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

HT201413 suddenly itunes will not open and I get a message that the "Data Execution Prevention" is blocking itunes from opening....why????

itunes will not open and I get a message that the "Data Execution Prevention (DEP)" feature in Windows is preventing it from opening. (this is after I've been using itunes for years???? If I try to manually deselect itunes from the DEP filter, of course I get a message that itunes cannot operate without the DEP active...another Catch 22 from the evil program designers....

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do?

Help. Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do? What does it mean? I bought Elements 10 at a retail store. It did work for a while.

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Itunes won't open. I get a message that it is not compatible,switch to English

itunes won't open. I get a message that it is not compatible,switch to English

Hey D28PICKER!
I have an article here for you that can help you troubleshoot launch issues with iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Thanks for using the Apple Support Communities!
Cheers,
Braden

TS4036 I upgraded to an Iphone 5 and open new Icloud account, I then backed up my phone on my brothers Mac Pro, I now want to restore my info to my phone and I get a message that says not enough space. What do I do

I upgraded to an Iphone 5 and open new Icloud account, I then backed up my phone on my brothers Mac Pro, I now want to restore my info to my phone and I get a message that says not enough space. What do I do

Delete all back ups on MacBook and create new back up. Restart his MB and attempt to restore again. Do not forget to erase your iphone 5 before restore.

When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly. Do you want to remove this short cut? The program has opened and worked fi

When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly. Do you want to remove this short cut? The program has opened and worked fine in the past.

You have (probably accidentally) moved or deleted the Lightroom program. You need to find it (have your operating system search for lightroom.exe) and move it back to where the shortcut expects it to be.

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

Glad you found the answer. But something seems wrong. FCP should be able to assign the scratch disk to your startup drive. It's not advisable, but it should be possible. You might want to try and figure out what's going on before what ever's going on cause other problems.

I have a macbook pro, when I try to open excel it will not open and I get a messages that states "cannot be opened 1712

I have a macbook pro, when I try to open excel it will not open and I get a messages that states "cannot be opened 1712.

What version Mac OS X?
What version Excel?

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail.

I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail. I can delete other files but several XLS files are giving me this message.

You said it was a network drive. So is someone else on the network using that same file or may have have left with excel still accessing it on their system?

I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent"....

I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent". How do I close these programs?

If the Office updates have to be run through Win in Parallels, there's not really a section here that covers that , because Neither Office or Parallels are Apple products. There is only a small chance that you'll find someone with BOTH your conditions who just happend to look into a forum on older iMacs.
Parallels has a forum here:
http://forum.parallels.com/forum.php
I think you'll get a faster response there.

TS1717 iTunes will not open. I get a message that says, "The iTunes Library.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the music folder." How can I fixt this?

iTunes will not open. I get a message that says, "The iTunes Library.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the music folder". How can I fix this?

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

When i try to open itunes i get a message that says the file "itunes library .itl" cannot be read because it was created by a newer version of itunes

When i try to open itunes i get a message that says the file "itunes library .itl" cannot be read because it was created by a newer version of itunes

Upgrade iTunes to the latest version. It should be 10.5.3.

My Safari page won't open and I get a message that says "Safari can't find the server"

Similar Messages

Maybe you are looking for