My Satellite A100 does not support SDHC cards with the internal card reader

Hi,
My satelite A100 does not support my sandisk 4 GB SDHC card.
"normal" SD cards are not a problem with the internal card reader, and there are no problems with the sandisk 4 GB SDHC card using a external card reader.
is there a software solution?
regrads,
Itock

I do not have time to read users manuals for your notebook model but all supported cards can be listed there. I suppose SDHC is not listed and not supported.
I do not know what you mean with software solution but, as far as I know, update for multimedia card reader is not available.

Similar Messages

Error when trying to re-mount a VHDx (the version does not support this version of the file format)

Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
Maike

Hi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway!

Lightroom 3 does NOT support raw files for the Canon Sureshot S95

Have just bought the new Canon Sureshot S95
after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
Canon Sureshot S95.
Come on Adobe.....please provide an update asap.

(1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW. Hardly a satisfactory solution.
(I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ).
(2) SUGGESTION- even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting). I am sure users with that preference would still prefer a JPEG than no picture at all!
Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs. So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
JJ
* (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

Does not support public parts with purpose assembly...

Hi,
When building a component, I'm getting the following error:
Server Component/Library DC does not support public parts with purpose 'assembly'.
Error: Build stopped due to an error: Server Component/Library DC does not support public parts with purpose 'assembly'.
Build plugin finished at 2011-03-24 12:12:40 GMT+01:00 (CET)
Total build plugin runtime: 0.311 seconds
Build finished with ERROR
To be more precise, one dc uses another from a public part that is "assembly" - so it's made the way it should be (both dc's are libraries, one java dc and the second one is server library)

Hi,
we are with NWDS 7.20 but afaik the "J2EE Server Component Library" in your version was replaced by Enterprise Application DCs in the meantime, so it is quite simple:
An assambly PP on a J2EE Server Component Library really does not make sense. The J2EE Server Component Library is the final assembly unit. You may use such a DC in two ways:
1. You want to use the classes that are bundled into the J2EE Server Component Library for compilation in another DC (Java or EJB). To achieve this you may create a COMPILATION PP on the J2EE Server Component Library that references compilation PP e.g. of your java DC. (The alternative is to let the using java DC directly reference the compilation PP of your Java DC.)
2. You have another assembly unit - e.g. an Enterprise application or another J2EE Server Component Library - that needs the classes in your J2EE Server Component Library at runtime. This is done by an application reference (in 7.20 defined in META-INF/application-j2ee-engine.xml of the DC that uses your J2EE Server Component Library). At runtime, the result is that your (initial) J2EE Server Component Library is the "parent class loader" of a using DC.
So indeed, there is no need for a PP of type assembly for a J2EE Server Component Library. This DC does not contrubute anything for assembly into another DC.
Rework your dependencies and PPs. [This PDF document|http://www.google.de/url?sa=t&source=web&cd=21&ved=0CBwQFjAAOBQ&url=http%3A%2F%2Fwww.sdn.sap.com%2Firj%2Fscn%2Findex%3Frid%3D%2Flibrary%2Fuuid%2F60d99678-1a29-2d10-94b4-9d9a67b7199b%26overridelayout%3Dtrue&ei=C1aSTZzgHsj0sga6l53QBg&usg=AFQjCNFGx2NeVkfWlnh0wGKsMasL95g18A] may be helpful.
Cheers,
Rolf

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?

Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.

I bought an iphone 5 in December. However my iPhone does not support 1700 HSPA . The current iphone 5 does. Is there any way I can trade my iPhone to get the current iPhone since they are both iphone 5?

I bought an iphone 5 in December. However my iPhone does not support 1700 HSPA . The current iphone 5 does. Is there any way I can trade my iPhone to get the current iPhone since they are both iphone 5?

No, you have to sell yours and buy the new iPhone 5 with the proceeds.
Please do not double post. Asking many times does not change the answer.
Message was edited by: ckuan

Folio Builder does not support proxy authorisation on the mac.

Folio Builder does not support proxy authorisation on the mac.
Which’s solution to connect ?

It does not work because the Folio Builder tries to connect to the proxy as "anonymous". I don't know any solution up to now... Anyone?

Satellite A100 does not "really" shut down

Hey everybody!
I have a Satellite A100 here and the problem is ... yeah, it does not really shut down. I can choose "Shut Down" in Windows and Windows shuts down, the monitor turns black and the notebook does not work anymore, but it does not turn off itself. The blue lights are still glowing. To switch off the system I have to push the on-off-switch for a few seconds.
The problem occured three days ago. I don't think it's a virus (someone on the net assumed that), because the system has no connection to the internet and has'nt seen any usb-stick or whatever for at least half a year. The user told me he changed the energy-options from "Toshiba Power Saver" to "Desktop". Of course I changed it back, but this did'nt solve the problem. I also did'nt find anything helpful in the options. Anyone out there who knows the problem or knows what to do? :-)
Greetins,
coincidence

Unfortunately, I can't. I choose "Shut down" in safe-mode and the operating system does a simple reboot. The notebook does not turn off at all.
Thanks so far. :) Merry Christmas!

Webelements : does not support when i add the data sourcce& view in HTML

hi Masters,
i am using sap crystal reports 2008 and when i add the data source and add tables to the report and i use web elements functions as my selection screen then it does not show i mean the script remains as it is and when i take out my data source
then it works when i view it in HTML VIEWR.
how can i make it to work despite me using the data soruce.
thank you,
pasala

hi Pasala,
this is due to the sap integration kit which does not support pass-through html. webelements require pass-through html in order to show up as html.
here's what you can try though:
1) install the latest sap integration kit on your boe system machine(s)
2) if the above does not solve the issue follow the steps at the bottom of [this thread|WebElements: HTML not rendering when using Bex Query as Source]
3) if 2 above doesn't work then see [this thread |Re: WebElements only show HTML tags (even after following WebElement guides)]as a last resort
hopefully step 1 & step 2 will solve the issue.
jamie

Lexmark does not support USB printing with Airport express

See email from Lexmark:
Hi Herman,
Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
Regards,
Arshad
Lexmark Technical Support
***Original Message***
On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
Dear Mamta,
Thank you very much for your support. I already tried what you
mention, but still without success. I downloaded again the x1100 all
in one driver but still I can't print.
Any suggestions?
Thank you,
Hernan
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, June 18, 2006 7:30 AM
To: hernan
Subject: Re:Lexmark Technical Support (Req# 942782055)
Dear Hernan,
Thank you for contacting us regarding this matter. I appreciate the
opportunity to assist you, and I hope my suggestions will provide a
resolution.
Please follow the steps given below:
1. Click on "Start," "Control Panel" and "Printers and Faxes."
2. Right click on the Lexmark printer icon.
3. Click on "Properties."
4. Click on "Ports" tab.
5. Place a check mark against "Enable Bidirectional Support."
6. Click on "OK."
You may copy and paste the web address given below to access the
Lexmark 1000/1100 Color Jet printer Windows XP driver:
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
1:0:1:0:0&emeafr
ame=&fileID=1580&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark 1100 Color Jet
printer Windows XP driver to your desktop:
1. Click on "Download Now."
2. On the "File Download" screen, choose "Save."
3. The next screen will be titled "Save As." Choose to "Save in
Desktop"
and click "OK."
4. You should see files being transferred.
***Note*** If your browser uses a different file downloading format
than specified above, you will need to resort to your browsers help
files for downloading instructions. The object of steps 1 - 4 is to
download the driver to your desktop. This way it is easily accessible.
5. Once the files have completed downloading, double click on the icon
with your file name.
6. On the "Win Zip Self-Extractor" screen click "OK."
7. To unzip the downloaded file choose "Unzip."
8. A screen will then display the number of files unzipped
successfully, click "OK."
9. Please follow the on screen instructions to complete installation
of your Lexmark printer.
If you have any more questions or concerns, please contact me at your
convenience and I will be happy to assist you. (If I am not available,
another representative will reply to you as soon as
possible.) To respond,
please select "Reply" in your e-mail software, and be sure that the
past e-mail is included in this reply.
[AOL Users: In order to include the previous e-mail, you must
highlight it with your mouse when you are replying.]
If you need to reply, please be sure to include in your message all
information from prior e-mail messages & replies. If your e-mail
client automatically deletes prior e-mail thread information, it will
cause a delay while we look up your support history. If this is the
case you may want to save the old e-mails as attachments and attach
them to the current e-mail.
Sincerely,
Mamta V
Lexmark eSupport Team
http://support.lexmark.com
Rate Your Support Experience! Your feedback is extremely valuable to
us.
Please click the link below to participate in the Lexmark Customer
Support Survey.
http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
07&getSurveyName
=
***Original Message***
On Sat Jun 17th 06:20:55 AM EST 2006,
hernan.>
I purchased the Apple airport express that connects
multiple
wireless-networked PCs to a usb printer.
is there a driver that can make this work?. I configured
the printer
according to the manual, received a test page and so on, but now it
takes ages to start printing and printing never gets to 100%
completion but to 99%. I am not able to cancel printing jobs and this
is a whole mess.
Best regards,
Hernan
vaio pcg-6c2l and IBM x40 Windows XP Both service pack2

Did you have a question?

Hosting company does not support SQL query with OUTFILE clause

From my mysql database, I want to allow the user to run a query and produce a csv / text file of our membership database. Unfortunately, I just found out my hosting company does not support the SQL query with OUTFILE clause for MySQL database.
Are there any other options available to produce a file besides me running the query in phpadmin and making the file available to users.
Thanks. George

Maybe this external Export Mysql data to CSV - PHP tutorial will be of help
Cheers,
Günter

Ios email app does not support user name with multiple "."

I have two gmail email addresses and have both set up on my ipad, however the ios email app cannot connect to the gmail server for one of the two accounts. Account settings are strictly identical and connection from the Gmail app works fine. The only difference I could find between the two accounts is that the one with connection issues uses a format of "[email protected]" whereas the one that works fine is "[email protected]". Is it a known bug that the ios app does not support the first format?
Thanks

Yes, double dots/periods are not allowed.

HT1848 How to transfer Ipad music NOT purchased from Apple to Macbook Air. Answers found in the Community does not seem to deal with the questions some members already ask.

how to transfer Ipad music NOT purchased from Apple to MacBook Air. Answers found in the Community does not seem to deal with similar questions posted to the Community.

You can only transfer purchases from iTunes on the iPad into iTunes on your computer. If you bought the music from another source, you need to use the source app to transfer the music, or you need a third party app to transfer the music.
http://www.wideanglesoftware.com/touchcopy/

Satellite A100 does not recognize new CD/DVD drive

I purchased a new CD/DVD drive for my four year old Toshiba Satellite A-100 as the old one went crazy and did not want to work.
Unfortunately I bought a Toshiba Portege A100 DVD/ CD-RW Combo Drive which is not exactly what I had before hopping that it will work anyway.
Unfortunately I got surprised because it does not recognize the CD/DVD drive at all :/..
It seems to work and the light is flashing so I believe that it is not broken.
I just plugged it in as that's the way I was told to do it.
Do I have to download drivers to make it run?
Will it work on my laptop or is it a "newer" CD drive which will not cooperate with my laptop?
I would appreciate any help. Thx

Hi
I think I agree with Jimi. For me it sounds like that your CD/DVD drive isnt compatible with the notebook. Note: Not all drives are compatible to all notebooks.
Normally the best option would be if you check the user manual before you buy a CD/DVD drive. On the first pages you can find a list of compatibles drives they were pretested from Toshiba in this notebook. So these drives should definitively work.
Alternative you can contact the ASP as Jimi said. They also sell compatible drives.
And by the way, here you can search for the nearest ASP:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider

Satellite A100 does not work anymore

Hi,
I bought a broken laptop and when I boot it up, I get very little:
all i get is 2 blue lights and a couple of red ones above the keyboars for around 1 tenth of a second.
I was thinking of resetting the bios.
I disassembled it and could not feel any heat going to processor but the board must work as the wireless card switch lights up along with start key but no fans or nothing else.
please help

First of all, I wonder why you bought a broken machine when youre not able to fix it.
If youre not a technician then sell the machine and buy a working one because no one here would exactly could tell you what to do or how to fix it.
The only posts would be like: "send the machine to an service partner" or "change the mainboard" or "sell the machine" , "throw the machine into trash"
I would assume that the mainboard is defective and needs to be replaced. I already replaced some mainboards on toshibas and its not that easy like some people think. You need some experience and often its not only the mainboard which is faulty, sometimes there is more then you assume.
I hope you get it fixed. Good luck.
Greets
P.s.: If you need a helpful site for something you would like to do then check the following link: http://www.irisvista.com/tech/

My Satellite A100 does not support SDHC cards with the internal card reader

Similar Messages

Maybe you are looking for