My Satellite A60 does not detect WLAN

Hello,
I just bought a SA 60 128 used laptop. I checked in many ways whether this system has inbuilt wireless connection. I tried to search this model over the internet to get the configuration but I couldnt. Now I am using a USB adapter to connct to the wireless network.
Please help me with this.

@razan
Why you search in the net for the information if the notebook has WLan card installed or not. Check simply the device manger and you will see if the WLan card appears or not.
Anyway, the USB Wlan stick is no a bad solution.

Similar Messages

  • Satellite Pro C660-1NQ does not detect WLan network

    Hi Guys,
    We have a Toshiba Satellite Pro C660-1NQ here which does not detect the wireless network at all,
    I have checked device manager and the wireless card does not show in here.
    I tried scanning for new hardware,but nothing was found. I tried turning the wireless off/on with the function and F8 keys but still not showing in device manager or finding any new hardware.....
    Any ideas as to what i can try next?
    Cheers,
    Ash

    Hi
    It seems that the notebook would support the Atheros 802.11agn Wlan card.
    Usually the Atheros Wlan card should be listed in device manager under in the menu Network Adapters.
    If its not listed then I recommend installing the WLAN driver which can be downloaded here:
    http://aps2.toshiba-tro.de/wlan/?page=downloads
    Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
    Hope this helps to detect the Wlan chip!!!

  • Can't install Win 8 - Satellite Pro C660 does not detect HDD

    Hello,
    My HDD has died, so i decided to upgrade my Satellite Pro C660-1D9 to an SSD.
    I made a bootable USB with Win8, and booted just fine.
    The problem is that it does not detect my SSD so i can proceed with the install.
    SSD shows up in BIOS, but not in Windows install.
    It says there's a driver missing.
    I downloaded AHCI drivers (XP, only ones available) and even then, after selecting the only driver that appears, it says no new devices found.
    I tried changing SATA mode from AHCI to Compatibility mode and it's the same..
    What can i do?
    Thanks for the help.
    Best regards,
    Bruno Moreira

    Older Windows XP required an AHCI driver from Intel but I think this isnt a missing SATA driver issue because as far as I know Windows 8 as well as Win 8.1 already contains the drivers in order to recognize the HDD or SSD drive.
    Furthermore the OS installation should be possible even if the driver would not be added... for this procedure you have to use the "compatibility mode".
    As you said, the compatibility mode did not work too, so I think there is another problem.
    However, Toshiba driver page provides also an Intel RST (Intel Rapid Storage Technology) driver (Windows 8 - Upgrade) which you could try to add while OS installation.
    But Im wondering if you would be able to install this Win 8 on common SATA HDD.
    Did you try to format the SSD drive using another computer and then to install Win 8?
    Try it out.

  • Wi-Fi does not detect on Satellite L40-139

    Hello!
    I have a problem with Wi-Fi connection on Toshiba L40-139 under Windows XP Professional
    I have all drivers for this model from this site.
    Also Intel PRO/Wireless 2915ABG: 9.0.4.39 adapter was installed.
    But during the installation there was an error "Couldn't install driver".
    Wi-fi card does not detect by device manager
    When I try connect to Wi-Fi network I have a message that there isn't any Wi-Fi devices on my notebook.
    Help, please!

    Hi
    As Im not mistaken the L40-139 PSL40E supports the Atheros 802.11g WLan card.
    And therefore you should use and install the Atheros Wlan card driver!!!
    Additionally you should perform a BIOS update.
    According to some postings here in the forum, the BIOS update helps to solve some WLan issues.
    Check it out & good luck
    Bye

  • TCP Read does not detect network conncetion closed error (66)

    Hi Dear all,
    Instead of LAN i am using WLAN to connect PC and mobile. All communication read and write operations are performing ok. But the only problem i am facing is that once i disconnect network connection from mobile my labview TCP read operation does not detect it and only timesout at its specified interval. Although for Bluetooth network connection if i disconnect from mobile then BT read detects it as network conncetion closed by peer error (66).
    Can someone help me on this.
    Thanks & Regards
    awais qureshi
    Solved!
    Go to Solution.

    Awais Qureshi wrote:
    Hi Dear Norbert,
    I am still waiting for your reply. Whats error you get once you unplug LAN cable? i am unable to understand how to detect Disconnection during Read Time out. Kindly help me in this.Thanks
    Dear VT Kim,
    I studied your recommended article but which way Labview handles TCP close connection then. i am unable to understand how to detect Disconnection during Read Time out. Kindly help me in this.
    Regards
    awais qureshi
    I have not tested it but more likely than not you would get an error 59 when the network cable is unplugged. Error 66 is for when the network is still up and you attempt to communicate on an established connection that has been closed by the other side. This is not an error that you will se from a TCP read very often.
    Also, please keep you related question in a single thread rather than starting multiple threads for the same topic.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • HH5 Does not detect my Technomate Box

    I've recently switched from a HH3 to a HH5, and now that I have set everything up, the HH5 does not detect a connection to my Technomate satellite box via Ethernet, this was not the problem with my HH3.
    Is there any way I can force a connection? Why has the HH5 blocked and detected no connection only to my Technomate Box, when it allows connection to all my other devices such as my PS4, YouView, and 2 Computers?
    Help?!
    Thanks.

    What's the ip address are you getting on the main computer ?

  • Win XP does not detect onboard ethernet card

    Hi,
    i have bought a used T41 (2373-tg5) and installed XP Pro SP3.
    I have installed all the drivers and everything is working fine. The only problem i have, is the fact, that XP does not detect my onboard 10/100/1000 Ethernet LAN card. It does not show up in the device manager and manually searching for new hardware is to no use.
    I have also looked at the BIOS config, the onboard ethernet card is listed as being "enabled". I am sure, there was a device marked with a yellow exclamation mark in the device manager named "ethernet adapter" once. I am not sure, wether this was the WLAN card, i have successfully installed a driver for...it is completely gone now though... 
    Is this some weird XP thing? I thought, i had read something like this once, but cannot remember.

    cnhoff, wilkommen im Forum,
    when you enter BIOS the MAC address of the internal LAN card should be shown at the bottom, is it showing a number or is it all zeros? All zeros means that there is no LAN installed which would mean in your case a new mainboard or using a pcmcia LAN card.
    Grüße
    edit: Typo
    Message Edited by andyP on 08-13-2008 07:10 PM
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Macbook pro does not detect TV

    Hi,
    I have macbook pro Mid 2010. It used to work fine with Sony Bravia TV but today when I tried it was not detecting my TV.
    I do not see any "Arrangements" tab under System Preferences -> Displays. Here are my macbook pro details:
    Processor  2.53 GHz Intel Core i5
    Memory  4 GB 1067 MHz DDR3
    Graphics  Intel HD Graphics 288 MB
    Software  OS X 10.9.5 (13F34)
    I tried to reset PRAM but no help. Any suggestions on what may be happening?
    Thanks,
    Gaurav

    skn2011 wrote:
    My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
    Are you using the Apple adaptor or a 3rd party

  • When i connect my philips 170c monitor to my macbook pro 13" early 2011, it does not detect the second monitor?

    help! i've googled around, but none seems to solve my problem
    my macbook pro is early 2011, 13", running lion.
    the philips monitor is vga only, so i have a mini display port to vga adaptor and connecting it to the vga.
    the screen on my mbp does turn blue, but no input is detected on the external monitor.
    any advice?

    If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

  • Smartband and Lifelog does not detect jogging

    Hello,
    Smartband and Lifelog does not detect jogging (does not distinguish walking and jogging/running).
    For example - walking with speed 5.7Km/h and treadmill running with speed 9-10 km/h.
    Smartband worn on left hand.

    Hi, 
    As I understand, lifelog log your exercise as running if the pace is 2.5 steps/ second or above. 
    What are your thoughts about this forum? Let us know by doing this short survey.

  • How can I use Bluetooth it does not detect others iPhone

    How can I use Bluetooth it does not detect others iPhone

    The bluetooth functionality on the iPhone is limited. It's basically limited to audio devices (headsets, for instance), although certain apps allow greater functionality. Search the app store for "bluetooth share"

  • HT4437 hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    See
    http://support.apple.com/kb/TS4215

  • Itunes 11.1.4.62 does not detect existing iphone or ipad

    Just downloaded the above, and now on plugging in either my existing iphone or my Ipad via wired USB connection, itunes does not detect the device.  Running windows 8.1, Tried updated iphone software to match as well, still no detection.  Am I missing something on the new version in set up or something, or is it an uninstall and reload?
    Thanks

    Have tried different cables as well

  • Hi; I updated my iTunes to the latest version (11.1.4.62), but it does not detect my iPhone 4s any more.

    Hi,
    I updated my iTunes to version 11.1.4.62, but it does not detect my iPhone 4s any more. I have tried the following ways but still did not work:
    Rebooted the computer
    Rebooted the iPhone
    plugged and unplugged the USB cable multiple times and to various USB ports
    Uninstalled and installed the i-Tunes
    Signed out the iTunes and signed in again
    my USB cable and ports are all ok
    my ios version on iPhone is : 7.4.4
    my laptop os is windows 8.1 and my processor is: Intel Core i7-3610QM @ 2.30 GHz
    I appreciate your help.

    I find this on another post and tried it.  It WORKED.  I had to modify to fit my situation but give it a try.  Good luck.
    Go to Windows 8.1 Control Panel.
    Go to Hardware and Sound; Devices and Printers; Device Manager; Portable Devices (look for Apple IPad)
    Right-click, then select properties on the menu list.
    Under the "Driver" tab menu, confirm the update driver button is not greyed out.  If the update driver button is grey and unselectable, you need to select and click "Change Settings" button located near the lower left corner.
    Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button.
    Select "Update Driver".
    Select and click "Browse my computer for driver software".
    For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. 
    Click Next, and let the driver re-install.
    iTunes  11.1.4.62 should open automatically if your iphone is connected already.

  • HT1296 i just downloaded the latest version of itunes but now i cant zync my ipod. i tunes does not detect my ipod. ut just to work perfectly with the older version of itunes but not now. what is something i can do?

    i just downloaded the latest version of itunes but i cant zync my iphone nor my ipod. it just to work perfectly with the older version of itunes  but now itunes does not detect my ipod nor iphone. i have a windows pd and iwindows detects the iphone and ipod. what is something i can do to fix the problem??

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests

Maybe you are looking for