My Satellite C wont load Windows - error code 0xcoooooe9

Hi,
get a status error come up when the laptop is turned on. The error code is 0xcoooooe9, windows does not load up and the diagnostics tool does not work.
Tried to recover to factory settings but this crashed out saying partition could not be created and only had an option to turn the laptop off.
Was bought from argos's ebay store less than 12 months ago and should still be under warranty but can not find out if it is on here.
Any help please ??
Message was edited by: MasterG

On this virtual way it is not easy to say what the problem is but maybe HDD make problems.
I recommend you to contact nearest Toshiba service provider and ask for help. They can check it.
At first clarify the warranty and I hope they will fix it for free.
Phone numbers and addresses you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

Similar Messages

Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

Hi Keen itunes User,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

TS1717 When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

Hi itunes wont install windows error 2 keep popping up what do i do?

hi itunes wont install windows error 2 keep popping up what do i do?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

RMI call resets Windows error code?

I'm attempting to retrieve a Windows error code from a remote system, using a simple call to the Windows API function getLastError() which is wrapped inside a JNI function on the remote system. getLastError() returns the last error code set for a particular process/thread.
The problem is, it appears that simply making the remote function call clears the error value before it can be returned. I can confirm that the error value was set on the remote system by printing the Process/Thread ID and getLastError() value to a console window on the remote system when one of my remote methods is called with out-of-range data. If I attempt to retrieve the error code, the Process/Thread ID match but the error code is always 0. No other methods were called on the remote system in between the initial error-generating method and the method which returns the error code.
Note that using the same JNI function calls without RMI works fine - I can generate error codes and retrieve them just fine.
Any ideas? Thanks in advance!

You're assuming that no other system calls are
executed between the one that caused the error you are
interested in and your GetLastError(). RMI executes
system calls on its own behalf, both to return the
value from the previous computation that caused the
error and to dispatch the new call into the method
that does GetLastError(). This approach is never going
to work. Why can't you call GetLAstError() straight
after the error happens, in the same remote method?This is what I suspected is happening, and if true, then I will simply have to rewrite my RMI method calls. Currently, they return -1 on error, and the error number is retrieved with a separate getLastError() call. This is done for legacy reasons (I'm calling C functions which were originally developed without Java/RMI in mind). As suggested, I'll have to call getLastError() immediately after an error occurs, and return the negative value of the error code rather than just -1. I've got about 200 remote methods to modify, so I was trying to avoid this, but hey... it's mostly search/replace.
Thanks for the help.

Error code 2 windows error code 2

I updated my iphone yesterday to the newest os so I had to update my ITunes as well. In doing so I was left with error code 7 Windows error code 127. I looked through the forums and did what was said. I removed iTunes, bonjour, apple support, apple app support, etc. and now when I reinstall it I get error code 2 Windows error code 2. not really sure what to do now because uninstalling it and reinstalling is not working.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Bonjour, won't install normally.
tt2

Library Update rqstd on Aperture 3.2; now won't open get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary" TIme machine won't load backup "error code -8003"

Aperture working on OS 10.6.8 then Library Update rqstd on Aperture 3.2; said yes;
now Aperture won't open, get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"
TIme machine won't load backup "error code -8003"
Tried reloading Aperture 3.2 but get same result.

You’re running an outdated copy of Safari on your Desktop. That won’t work.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. Check that the Safari application is in that folder. If it is, use it, and delete the copy on your Desktop. Never move or copy built-in applications.
If you've deleted Safari from the Applications folder, back up all data, then reinstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Dreamweaver CS4 on Windows 7 wont load. Error NTDLL.DLL

Hello,
Randomly, Dreamweaver started crashing on startup a month or so ago. I tried uninstalling/reinstalling it & the entire CS4. But no luck. I tried the default print trick, and it didn't work either. I can't figure out any other solution. Please help!
Windows Error Log :
Log Name:      Application
Source:        Application Error
Date:          6/13/2010 9:24:01 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Nu-top
Description:
Faulting application name: Dreamweaver.exe, version: 10.0.0.4117, time stamp: 0x48c874b4
Faulting module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdb3b
Exception code: 0xc015000f
Fault offset: 0x00084401
Faulting process id: 0x1a04
Faulting application start time: 0x01cb0b68a4244f94
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS4\Dreamweaver.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: e45cf5ba-775b-11df-b771-dc3f571bfbcd
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-06-14T02:24:01.000000000Z" />
    <EventRecordID>9253</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Nu-top</Computer>
    <Security />
</System>
<EventData>
    <Data>Dreamweaver.exe</Data>
    <Data>10.0.0.4117</Data>
    <Data>48c874b4</Data>
    <Data>ntdll.dll</Data>
    <Data>6.1.7600.16385</Data>
    <Data>4a5bdb3b</Data>
    <Data>c015000f</Data>
    <Data>00084401</Data>
    <Data>1a04</Data>
    <Data>01cb0b68a4244f94</Data>
    <Data>C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS4\Dreamweaver.exe</Data>
    <Data>C:\Windows\SysWOW64\ntdll.dll</Data>
    <Data>e45cf5ba-775b-11df-b771-dc3f571bfbcd</Data>
</EventData>
</Event>

Hi
This is reporting a problem with your windows 7 installation not the dreamweaver installation -
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
You could check the installation problems on this page - http://forums.adobe.com/thread/417116.
PZ
www.pziecina.com

I can't install Itunes 11.1.2 on Windows, Error Code 2324

I connected my iPhone 4S to my Windows 7 Computer to synch my music. My older iTunes said that i have to update to 11.1.2. So i tried to update it with the apple software updater 4 times, but it did not work. i also tried to load the files only and then install it. It says to me that there is an error code 2324. I am very frustrated, please help me.
Taxla

Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

Re: Satellite Pro C870 - No Wireless, Error code 43

Have two new Satellite Pro C870's where the wireless was being disabled every second startup. Wireless NIC in device manager had an exclamation mark and was showing "Windows has stopped this device because it has reported problems. (Code 43)"
After performing a system restore as advised by support the issue was still there.
Just before sending the two laptops off for repair I undid a setting called "fast boot" in the bios (otherwise set using a Toshiba utility).
Issue seems to have cleared after this.

Hi
You are using Win 8. Right?
> Have two new Satellite Pro C870's where the wireless was being disabled every second startup
First of all you should know that Windows 8 does not perform a real shutdown.
It goes just in hybrid mode.
Maybe the error 43 is related to the fact the Win 8 and notebook did not shut down as you expected from a system like Win 7.
If you would search for error code 43 using google, you will get a lot of hits and mostly its system / driver issue.
So first of all I recommend disabling the hybrid mode and performing complete shut down:
+Perform a complete shutdown in Windows 8+
http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
secondly try the WLan driver update.
Regarding the other issue
>Also had an issue with the function of turning on when the panel is opened: this would cause the laptop to turn back on immediately after shutting down.
This is also an Windows 8 feature which can be disabled:
+Why does my Windows 8 notebook start automatically when opening the display lid?+
http://aps2.toshiba-tro.de/kb0/FAQ2C03FA0001R01.htm

Windows error code 0xc0000034

Recently, when I switch on my laptop, this error code appear 0xc0000034.
My question is, why Windows can fail? I keep my Windows updated, installed anti-virus, scan my laptop every week, de-fragment my hard disk every fortnight.
Some say my hard disk may have problem, but it is okay. Then I try to repair using Windows Repair Environment. It did the trick but I have no idea how it's fixed.
Any of you facing the same problem? I search the internet and there appears a lot of people facing this issue. If it is a common problem, why Microsoft fail to fix it?
Thank goodness my laptop is recoverable, if not, imagine the time I lost just to do a fresh installation to my laptop and copy all my backup.
Chiyawa

Solved - for the record - followed the directions in this link:
http://pcsupport.about.com/od/fixtheproblem/ht/rebuild-bcd-store-windows.htm

Windows error code 14

Sadly When i try to use spotify since after the update .. which seem to be faulty on my endso i close the progamand get installing spotifybut than the Error 14 pops up The intsller is unable to intall spotify because the files to write are in use by another process. Please make sure spoitify is not running and retry. (Error code 14) so after bringing up task manager and check for any running spotify apps expept for the intaller and find none.. i hit retry Were it just hangs ... until a reset and it loops al over againis there a way to disable the update ?

ERROR 14 FILES IN USE.. this bug is now over 2 years old and still we ave having to do geeky maunal workarounds in windows 7 I have had to manually intervene with 1.01, all the way through to 1.06 and today once more for 1.07 Will spotify ever be arsed to write an updater that just works, and that does not run from appdata or from appdata local, or will we all be on windows 19 before that happens? My current fix is to look for whatever the latset installer is called & for wheretis currently hidden ( the last couple have been hidden in an update sub folder of appdata local spotiy ), and COPY that file to desktop. BEFORE clicking " just restart spotify" and watiching it bomb out with error 14. then kill the failed update with task manager and run the installer from desktop, which then usually works. why we have to go through this rigmarole when any other software on the planet is able to instll updates in windwos 7 sensibly and reliably is beyond me . could we at least , for variety, have a meaningful error message to entertain ourselves , as that one is just a lie. looking in windows ask manager after 1=error 14 has appeared can proves that no other spotiy processes are runnign and yet RETRY will just cause install to installer to infinitely hang until euthanised. NB the days whtn the installer was always called spotify_new.exe and lived in appdata/spotify are gone. Now each version's installer has a cryptic nom-de-jour, and a new hiding place in local appdata , for added hide n seek fun

Windows error code 0x800f0922

I want to install .net framework but i keep getting the same error code. How do i fix it? I've also tried it by the windows feature on and off, same thing, How do i fix this? Need some help....

Im having the same problem, when i tryed to install Telnet Client using Programs and Features...

Windows error code -42110

I just upgraded iTunes software.
When launching the iTunes version 11.0.2.26 I get a Windows unkown error code : -42110.
Anyone who knows about this? Impact and solution? Thanks

Hello Guys, this upgrade seemngly also killed my iPod Classic 160GB... Both my iPad and iPod were connected to my Windows 7 Home PC. After the iTunes upgrade the same unknown error popped up, immediatel after came something like a "corrupted device". My iPod tried to restart, and seems to be in an infinite restarting loop...the apple logo is on for minutes, then a loud "click" from the HD and it starts again. Nothing helps (middle button+menu reset). Do you have any ideas? Thanks

OBIA 7.9.5 "Financial Analytics" GL/AR Fact load fails "error code 36331"

Hi all ,
For Financial analytics7.9.5 below fact load getting failed "error code 36331".
'SIL_GLOtherFact_Full' has failed.
'SIL_GLCOGSFact_Full' has failed.
'SIL_GLRevenueFact_Full' has failed.
'SIL_ARTransactionFact_Full' has failed.
Let us know how to fix this up.
Should i need to follow the comments posted in this link
Re: Help !!! Re: Fianacial Analytics failed with Error Code = 36331
thanks
saran

ORA-12520: TNS:listener could not find available handler for requested type of serverI've not seen this error myself, but looking on Google it appears to be an unsolved problem on OBIA.
Since it's intermittent then it rules out obvious things like the Oracle database being down or the connectivity being incorrectly configured.
Looking on My Oracle Support (metalink) I found discussion of the error with reference to a completely different product but around the issue of parallelism.
If I had to guess I'd say that the keyword in the error is available - the oracle DB is being swamped with more requests that its configured to handle.
My suggestion would be speak to your DBAs and ask them to monitor the number of sessions on Oracle DB whilst your ETL is running and watch for any limit being breached. If possible up that limit, or reduce the amount of ETL tasks running in parallel.
I'd also suggest raising an SR with Oracle since it's evidently a not-uncommon problem.

My Satellite C wont load Windows - error code 0xcoooooe9

Similar Messages

Maybe you are looking for