My Satellite C50D-A-13L doesnt start

When I want to turn my laptop nothing happens.
Does anyone else have this problem?
Message was edited: posting has been translated

Hello Francine
When you turn on the computer, do you have the Toshiba logo appears or not?
Whether it is a software problem (loading windows) and I need you reformatted your hard drive with backup DVD (it happened to me the other day). Otherwise, if the Toshiba logo does not appear, I think it's a hardware problem (the problem in general graphics chipset on the motherboard, and there is trickier. if your computer is still under warranty, do play ... it happened to my sister and out of warranty repair cost about 300 Euros.
There are plenty of questions to ask in your case, if you have the Toshiba logo appears it would be better for you.
Good luck.
Message was edited: posting has been translated

Similar Messages

  • Satellite C655 - Windows OS doesnt start anymore

    I have a C series and it was working fine yesterday. This morning i turn it on and you can hear it starting as usual and then the first screen (Toshiba screen) is visual and then it goes black with a hash mark at the top left corner and stays like it and wont move forward.
    Any hints on how to get it working right?

    Blinking cursor in the left upper corner is mostly a sign of HDD malfunction or RAM problems.
    Therefore you should check if HDD is listed in BIOS (first BIOS page) properly.
    In case its not listed, the HDD is faulty and has to be replaced.
    In case its listed, you should check if you could reinstall the system using Toshiba Recovery disk (medium) or other Windows installation disk.
    If its not possible, the RAM modules should be tested, checked and if necessary replaced.

  • Satellite C50D-A-12V wont start with USB or ODD

    I need to order a recovery media form Toshiba to reinstall to factory settings but I cannot get the Laptop to start up with a usb or CD device. I have changed the boot device but the laptop ignores the command and stars up in hdd every time.
    Can anybody help?

    Start notebook and press F12 several times to enter boot menu. Put bootable USB stick into USB port or CD in optical disc drive after doing this, choose which device should be set as bootable device and press ENTER.
    Do you use bootable media?
    If you need to order recovery media you can do this on https://backupmedia.toshiba.eu/landing.aspx

  • Satellite L650-16W - Fan doesnt (re)start after standby

    Hello i own a Satellite L650-16W and after standby-mode the fan doesnt start again. So the temperature increases untill a reboot is necessary. After the reboot the fan works correctly again. I own this notebook for about 4 month and at the beginning this problem didnt appear.
    Ive tried to update the bios but it seems to be the actual version. And i dont find any options to put the fan manually on again. So maybe anybody has got the same problem or a solution.
    Thanks for your help.

    Bios reflash is a a little bit tricky procedure and if it goes wrong you will get a black screen. Note, the warranty doesn't cover bios reflash failure. Go to the toshiba driver page:
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp and choose the right Bios for your model
    If Bios version on toshiba driver page is the same with installed one yoyr lap, download it anyway and run it. Read carefully instructions how to reflash it:
    http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=60
    you may get a message while reflashing the current version is already installed....
    Anyway, before all, I advise to restore the factory settings to be sure that isn't OS related issue.

  • Re: No Signal from Satellite C50D-A-139 HDMI out port

    Hi
    I have connected toshiba Satellite C50D-A-139 ( windows 7) via HDMI port ( using hdmi cable) to tv plasma, but on TV screen appears only "there is no signal".
    I am sure that HDMI cable works good, becasuse it works with Playstation 3 correctly. I have tried to click "winows button + p" "fn button + F4", but there is no result. nothing happend.
    I have also clicked right "mouse button" and choose "screen resolution" but there is also only one screen ( laptop screen) to choose. I tried to click "detect" but nothing happend.
    Please, give me some advice...

    I have downloaded all drivers from "slim drivers free". Program scanned my computers and said that "all updates have been installed". I have also downloaded "Hw set up" from Toshiba website. That utility is directly for my laptop.
    And now,when I have opened "HW set up", I've chosen icon "display", then - appears dispatch like this: " this bookmark purpose is to choose inside display or outside screener during activating/starting computer".
    Then i have chosen "outside display device" - Tv and HDMI. After that, if I restart my laptop, signal is transmitted to my tv and my laptop display turns black. But only video signal is transmitted to Tv, Audio is still coming from notebook. After that I've return to previous settings.
    I have also downoladed "Toshiba Satellite A300D HDMI Control Manager Driver 2.0.0.1", I have installed it but it seems that program doesn't work at all.
    About FN keys : When for example I click "FN+f5"- touchpad switchs off, when I click "FN+F9/F10, volume goes up or down. But when I click "FN+F4" computer "Thinks" for a while, but nothing is happening
    As you can see, I have enabled right HDMI port. Furthermore if I disconnect HDMI Cable from notebook and connect it to my PS3 it automaticly works just fine.
    In past I have been connecting hp pavillon (windows vista) to the same tv, and I haven't got any problems.

  • Update of Bios, now computer doesnt start

    i had receive an up date of the bios of my satellite p855-s5200, and now my computer doesnt start... what i can do? i dont want to lose my information, and i need my computer working

    but why hardware, if the problem appear with update of Bios, what do you think it could it be? do you think it will be expensive to repair it, i had bought this computer on august
    Peter wrote:
    The first four steps still apply to Windows 8 as well, and those steps won't delete your data. However, it sounds like you may have a hardware failure.

  • MacBook pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, etc

    MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside

    Try a SMC reset.
    http://support.apple.com/kb/ht3964
    It might be helpful if you indicated the exact model/year of your MBP.  Are you running Lion OSX?
    Ciao.

  • My mac doesnt start. All i get is the gray screen with the apple and the loading icon but nothing more happens. I tried to start it in safe mode but it doesnt help. What can i do?

    My mac doesnt start. All i get is the gray screen with the apple and the loading icon but nothing more happens. I tried to start it in safe mode but it doesnt help. What can i do?

    If you have a external USB enclosure - trying installing your hard drive in that enclosure and connect it to your usb port - restart your macbook while holding down the options key.  If you Macbook boots to your desktop then you have a faulty cable.  If you get the same error, then your hard drive just died on you.
    good luck.

  • HT201210 trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know

    trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know why?

    The servers are overloaded. There are a hundred million people all trying to download iOS 7 at one time. Try again later

  • A505 doesnt start from sleep mode

    My laptop sometimes doesnt start from sleep mode. Everything is flashing but display is black. after reset with power button starting ok.
    Do you have some idea?
    Thanks
    A505-S6033, Windows 7

    I have some problem, but sometime my A505-S6035 when restore from sleep mode LED indicators haven't highlight and brightness of screen is not control by anyway. Can anybody help?
    A505-S6035, Windows 7 Professional

  • Flex datagrid with complex data item - drag doesnt start sometimes

    Hi,
    my project has a datagrid which is rendering complex data item. I need to drag one row from the grid and drop it into the same grid but in a different position.
    I have enabled drag, drop and dragMove.I am able to drag and drop the rows. The problem is that sometimes the drag doesnt start.
    Here are a few scenarios where drag doesnt start
    the first column is not editable. if I start my drag by doing a mouse down on the frist cell of the row, it usually drags an empty row but sometimes it drags the whole row.
    if I have dragged and droped a row in position i(say). Then sometimes the row at position i-1 or i+1 doesnt get dragged no matter how many times i try to do mouse down and drag. However, if I drag some other row (not necessarily drop it elsewhere) and then try this row, it works.
    any pointers would be helpful.
    thanks in advance

    Update on item 4a -
    This was a major issue (the main reason for opening this thread really) and I managed to resolve it!
    As part of my application, I override the default DataGrid behavior for column selection (headerRelease event).
    Instead of sorting, I change the column's header looks and define it as Selected (for showing its dynamic properties and enable its deletion).
    At first I did this by setting styles, but the look didn't refresh unless I created a new instance of the header renderer.
    Later I changed thi behavior to work with states, but I left the new header renderer instance creation commands and those lines created all the mess!
    Conclusion -
    If you define a custom header renderer for your datagrid column and then a custom item renderer, don't create a new instance of your header renderer!
    It would still be nice to get some response for the other issues I raised.
    Thanks and have a nice week.

  • Mac book air doesnt start

    my mac book air doesnt start and press switch gives buzzer sound my model is of 2010

    Are you hearing three beeps?
    When plugged in does the green light come up showing a charged battery?
    If you cannot get to recovery mode and can do nothing ....youll need to make an appt. with Apple for in shop full diagnosis and possible repair.

  • Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?, Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?

    Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?, Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?

    I did this several times.... not help. If I run win8.1 safe mode the Itunes stars and mentioned that video and sound driver not fit for them. After this I downgrade the driver to Win7---> not helped after this I update driver to latest--> not helped....
    This is the situation right now.

  • My adobe creative cloud doesnt start correctly it appears a white screen in the

    the principal screen and not the list of programs. is the second time of installation of this in my computer because I restore it .  And I have tried to install it many times and sometimes it apears the 206 error.
    my computer has windows 8

    Thanks !
    Date: Sat, 5 Apr 2014 03:48:29 -0700
    From: [email protected]
    To: <Removed by Moderator>
    Subject: Re: my adobe creative cloud doesnt start correctly it appears a white screen in the my adobe creative cloud doesnt start correctly it appears a white screen in the
        Re: my adobe creative cloud doesnt start correctly it appears a white screen in the
        created by Abhijit Kr. in Creative Cloud Download & Install - View the full discussion
    Hi angelogiuseppe9,
    If you are getting blank screen after launching Creative Cloud Desktop app then deleting opm.db should help. Please delete all the contents from this location.
    C:\Users\abhijiku\AppData\Local\Adobe\OOBE
    If you are getting Error 206 while installing then try to change the connection from LAN to Wifi and vice cersa. You can also try disabling your software firewall if any.
    Please let us know if it helps
    Regards,
    Abhijit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6273700#6273700
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: my adobe creative cloud doesnt start correctly it appears a white screen in the
    To unsubscribe from this thread, please visit the message page at Re: my adobe creative cloud doesnt start correctly it appears a white screen in the. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Creative Cloud Download & Install at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150;30

    Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150:30

    Yes, Actually was done from an Apple Genius at the apple store, the hard Disk was formatted and then re installed everything from back up.

Maybe you are looking for