My Satellite cannot recognize the new HDD

I bought a new hard drive for my laptop. After installing it I got message no fixed drive found. I updated the bios from Toshiba site and the same message is still there.
I have also tried the drive in another laptop. It was recognized properly so I formatted it an installed Windows XP Pro on it. It worked ok so I tried it again in my laptop but message saying put system disk in press any key. So I put XP disk in it starts the install and then starts to transfer files and gives message no hard drive found so it still does not find the hard drive.
Please can anyone help?
Ken

Hi Ken
It would be very nice to know the exactly notebook name.
I suppose the BIOS cannot recognize the HDD because of the HDD size.
It would be very interesting to know if the HDD is supported and compatible with this notebook

Similar Messages

I changed my Apple ID to a new email address. I cannot get my Iphone and Ipad to recognize the new Apple ID.

I changed my Apple ID to a new email address. Now I cannot get my Iphone and Ipad to recognize the new Apple ID ... and I cannot access the old Apple ID because it does not recognize its password any more ... and I cannot change the password ... and there seems to be no one to ask about this. Any help?

I tried but it won't let me even access the old Apple ID. It won't recoginze its old password and will not let me make a new one. (The site tells me it has sent an email to let me change the password but the email does not come.)

I'm getting a new iPod touch 4G to replace my old 1st gen. pod. How do I get iTunes to get rid of my old iPod and recognize the new iPod and can I sych the new pod and get all of the content on it from my old pod?

Hi-
Oops. looks like I hasked the whole question in the headline, but... How does this work? When I connect my new pod to iTunes how do I get iTunes to recognize the new pod, disregard the old pod and transfer my content to my new pod? Also, I have a G5 that runs 10.4.11 OS. Will the new pod synch to this computer running this old software yet. Apparently, I have to "climb the mountain" to find a copy of Leopard for G5 and I apparently cannot run Snow Leopard. What are the needs or restrictions for synching a 4th Gen iPod touch?
Thanks-
DMitz

The 4G iPod needs at least OSX 10.5.8 on a Mac. You are right that the G5 can't use OSX 10.6 or later. Apple will sell you a 10.5.8 disk but you have to call them since it is not listed in their on-line store. Price is $129.
For 4G specs:
System requirements
USB 2.0
iTunes 10.1 or later6
Mac: Mac OS X v10.5.8 or later
PC: Windows 7, Windows Vista, or Windows XP Home or Professional (SP3) or later
Broadband Internet access required; fees may apply.

ITunes Media And Removable Storage Issue - Can't Get iTunes to recognize the new location. Any tips?

I've had my iTunes media on an external HDD for years. Let's call this drive B.
My iTunes library and xml file reside on my Mac HDD.
I decided that I wanted to buy a bigger HDD and move all of the media to it. Last night I copied all of the media files to the new HDD (let's call it P) from B. I also copied the iTunes folder from my Mac HDD to P and directed iTunes to look for the media in the Advanced settings.
Of course when I launched iTunes after all the hours it took to do all of this copying, it could not find any of the media on P without asking whether I wanted to locate it - and the library was full of explanation points. When I examined the info on a few songs, it was showing that all of the media was still pointing to B as the location with the complete directory structure pointing to that old location - and not to the new drive.
I tried creating a new library and still could not get the library to recognize that all of the media was now on P instead of B.
I remember when I did something similar years ago, I just changed the location in iTunes in the Advanced settings and iTunes realized that all of the music was on B instead of its prior location.
I finally gave up and restored things back to the original settings with all the media on B.
I did a lot of searches and followed everything explicitly -- which basically meant copying the iTunes folder (with the library and xml files within it), and the media to the new drive and then telling iTunes where the new location was. To me it shouldn't be any simpler than that to get iTunes to recognize a new location for all the music.
Can anyone offer a more rudimentary breakdown of things for me to try so that I can get iTunes to acknowledge that all the media is on P and not B?
P is larger than B for those of you who are wondering why I'm trying to get this to work. And P also will be a drive that dedicated to iTunes and media and nothing else. Unlike B, which has all kinds of assorted files on it along with my music, etc.
And yes, each time I made changes - I restarted iTunes

Thank you both for the information.
It sounds like I did something out of sequence based upon reading the split library information, thinking I was doing the right thing.
This is exactly what I did
I copied the folder with all the media from B to P
I copied the entire iTunes folder from the Mac HDD to P
I option click started iTunes and connected to the library file and when iTunes opened it was OK - and looked like it normally does when I was still using B as the storage
I connected to P
When it didn't work, I tried to create a new library and did the same exact things.
So let me ask this:
Should I hook up P again and delete everything off of it except for the folders that have the media in them and then copy the current iTunes folder over onto P again - and then copy all of the media from it's current location into the iTunes Media folder inside of the iTunes folder I copy over from the Mac and then try to connect and consolidate everything?
I assume that if I move everything from the current media folder into the iTunes/iTunes Media/ that I copy over everything will be under the iTunes umbrella as if things were never split?
I don't seem to recall it being this difficult when I originally set up things on B, as it was a split situation then too, if I'm not mistaken.
I really appreciate the instruction. And honestly it does make sense to have everything in one location to prevent problems like this from happening - it would just be great if iTunes had a feature that moved and/or copied the necessary files to the new location to prevent splitting links

HT4972 I replaced the computer I originally used to synch my iPhone. I get the message stating that my content will be erased, even though this is the computer I now synch with. Is there a way to make the update recognize the new computer?

I replaced the computer I originally used to synch my iPhone. When trying to update to iOS5.0, I get the message stating that my content will be erased, even though this is the computer I now synch my phone with. Is there a way to make the update recognize the new computer so that my content will be kept?

The best option is to copy your entire iTunes folder from your old computer to your new one using one of the methods described here: http://support.apple.com/kb/HT4527. This will allow iTunes on your new computer to recognize and sync with your phone without deleting content. You will also need to copy over any other synced data not in your iTunes library such as photos synced to your phone, calendars and contacts.
If you can't do this, these articles will help you start syncing with your new computer with minimal or no data loss:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
Recovering your iTunes library from your iPod or iOS device

How can I get my HP DeskJet 6540 to recognize the new ink cartridges I installed?

Hi everyone. I have an HP DeskJet 6540 printer and I replaced the ink cartridges. After I replaced the cartridges, I aligned them and then did a test print. I noticed that the blank ink didn't print. I opened system preferences, and then I opened the printer utility. It says, "Device Status : Pen Failure." Current Supplies Levels says, "The current levels for the selected printer are shown below...Cartridge on the left (tri-color 97) is unknown and the the cartridge on the right (black 96) is missing." Oh, I forgot to mention that the print cartridge light on the left side is flashing. I went to the HP support website and it says that the problem could be an incorrect print cartridge, incompatible print cartridge, or problem with the (left/right) print cartridge. The solution they offered was to remove, inspect and reseat the problem cartidge. It also said to clean the problem cartridge contacts. I did that and it still gives me the same results. I even reset the printer but still got the same results...
So the next thing I try is the OTHER cartridges listed as compatible with my printer which is 94 (black) and 95 (tri-color). I bought the new cartridges, placed them in the printer and I still got the same message from the print utility. I took the latter cartridges back and got a refund and explained that none of the compatible cartridges are working with my printer. I kept the 96 and 97 cartridges in the printer and the light on the left continues to flash so now I'm here asking if anyone knows how I can get my printer to recognize the new ink cartridges I installed? Are there any other solutions that I have besides throwing the printer out of the window? :-)
Thanks everyone ;-)

With all that you have done it does sound like the printer has a fault. If you haven't tried turning off the printer for several minutes, then this would be worth trying (maybe you have done this when you say reset the printer?).
If the cartridge light on the printer flashes when you turn the printer back on then it sounds like a hardware fault - not the driver or the operating system. And this is not usually something a user can resolve so it would need repair. And for the cost of a new printer, why would you bother.
If you plan of sticking with HP and getting another model that can use the 96 & 97 cartridges (let's face it, they often cost more than the new printer), then take the two existing cartridges to the store and see if they will let you check they are okay. No point throwing them out also if they still have a fair bit of ink still in them.

I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...

I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...
Using 2 displays, connected via HDMI and thunderbolt
Been on to support a number of times now - is anyone experiencing the same issues?

BUMP.
I actually showed this to Apple geniuses when I took my computer to the apple store, and it's still here. In console it says:
kernel[0]: Previous Shutdown Cause: -128
I don't know if that's related or not, but maybe helps?

I cannot uninstall itunes version 10.7.0.21 from my laptop use of that I also cannot install the new update.

I cannot uninstall iTunes version 10.7.0.21 from my laptop (windows 7), therefore I cannot install the new iTunes version....!
Every time I try to do it, a "message" from the windows installer pops up saying "The feature you are trying to use is on a network resource that is unavailable", I try to find the installation package "iTunes.msi" but I can never find it either...!
The funny part is, I can still use this version, but I would like the have the update, which can make my computer much faster than now!
Can someone help me out??

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Cannot find the new binding

Hi !!
I am using jdeveloper 11.1.1.5!!
I had dragged and dropped mu OpcLoseId [an LOV] from my OpportHd table in a af:form.
I had passed this value as a parameter to my AMImpl Method. So that while my user clicks the button this method get executed.
My Scenario:
While my user clicks the button i am getting an error in my Log as given below
<FacesBindingRewiringListener> <afterPhase> ADFv: cannot find the new binding with name data.com_rits_suplr_view_CrmAppIndexPageDef.pageTemplateBinding.r0.PageFragments_MKG1020PageDef_WEB_INF_TaskFlows_MKG1020TF_xml_MKG1020TF._lovTree_OphdCloseId.Could any one pls help to solve this issue?

I just encountered this, and what I think is happening here is that the list binding is not able to resolve the user's choice to a valid value in the LOV.
I see this when using an [af:inputListOfValues|http://http://docs.oracle.com/cd/E16764_01/apirefs.1111/e12419/tagdoc/af_inputListOfValues.html] and the user types in something that is not available through the list data source.
I know this thread is old, but shows up in google when searched for this error message and I thought I'd update it with what I thought.
-Jeevan

Nqserror 36010 server version 318 cannot read the newer version 320 of the

Hi All,
I am trying to open one of my RPD file, i am getting above error(nqserror 36010 server version 318 cannot read the newer version 320 of the repository)
Currently i am using the following version of the obiee (11.1.1.6.0 ) , repository version 318.
Can any one tell me what are the steps i need to follow to open my RPD file.
If i need to install the patches which all the patches i need to install
Please help me to resolve the issue. It is very impotent to me
Thanks in advance,
Regards,
Krishna

Hi All,
I tried both the processes
while i am using the nqudmlgen.exe i am getting the same error
while i am using the nqgenoldverrdp.exe i am getting can not open c:\file but the path is the same
could you please let me know if i am doing any wrong
Regards,
Krishna

HT1923 I could not update the new version of itunes. I uninstalled the previous version, but I cannot get the new version to update on my windows 7 i5 pc..any solutions? thanks

I could not update the new version of itunes 11.1.4.
It told me to uninstall the old version, but I cannot install the new version.
Any help?/ solutions?
Thank you

Hello jasopz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best of luck,
Mario

HT4623 Why I cannot use the new feature of phone after I upgraded to ios 6???

I have already upgraded to iOS 6, but why I still cannot use the new feature of phone??
I cannot reject calls by sending them message. What happen??

While ios 6 is compatable with the iPhone 4, many of its features are not available for the 4. The features need the 4s or 5. See here:
Turn-by-turn navigation is available only on iPhone 4S, iPhone 5, and iPad 2 or later with cellular data capability. Flyover is available only on iPhone 4S, iPhone 5, iPad 2 or later, and iPod touch (5th generation). Cellular data charges may apply.
Siri is available in Beta only on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Siri may not be available in all languages or in all areas, and features may vary by area. Cellular data charges may apply.
FaceTime video calling requires a FaceTime-enabled device for the caller and recipient and a Wi-Fi connection. FaceTime over a cellular network requires iPhone 4S, iPhone 5, or iPad (3rd generation) with cellular data capability. Availability over a cellular network depends on carrier policies; data charges may apply.
Offline Reading List is available on iPhone 4 or later, iPad 2 or later, and iPod touch (5th generation).
Made for iPhone hearing aids require iPhone 4S or iPhone 5.
Panorama is available on iPhone 4S, iPhone 5, and iPod touch (5th generation).
Find My iPhone and Find My Friends enable you to locate iOS devices only when they are on and connected to a registered Wi-Fi network or have an active data plan.

HT4623 i cannot download the new update for my iphone it keeps having errors pop up error 3401 and -1, it will start to download and then right at the end show up with the error -1, this is a bug in itself, tell how to fix it, i followedsteps given alread

i cannot download the new update on my phone nor use it at all now because the itunes has too many errors on it and will not allow the recovery mode to commence

Try Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Captivate 7: "Cannot apply the new theme"

Hi all,
I'm trying to apply a new theme on a Captivate 7 project and keep getting the error message "Cannot apply the new theme". Any suggestions as to how to fix this? It's driving me insane and I really don't want to start my project from scratch.
Thanks in advance!

You posted this also on a thread by another user.
When you reinstalled, did you first delete the Public Layouts folder, not the one in the installation folder of CP? Which OS do you use, I'm on Win7, and this is the path to that folder:
You can still delete it now, when you restart Captivate it will be refreshed, recreated. Same question about Preferences....
Lilybiri

Could not complete your request because Photoshop Elements cannot recognize the file extension. (-25600)

im trying to add a water mark to multiple photos but I keep getting Could not complete your request because Photoshop Elements cannot recognize the file extension. (-25600) error. how do I fix this?

If you open up editor then expert mode then you click file and the it's manage multiple or something like that. It will pull up a box asking you where you would like to get the photos from. I picked a folder where I just edited the skin tone and then saved it. I'm thinking it has something to do with the way the files save but I'm not sure how to get it to change. But after the box comes up you can add a water mark to all the photos in the folder. I found the video of how to do it on here.

My Satellite cannot recognize the new HDD

Similar Messages

Maybe you are looking for