My Satellite L505D-S5992 Windows wont Start

Windows will not start, Runs Startup Repair, but says that it cannot automatically fix the problem.

Satellite L505D-S5992 
Runs Startup Repair, but says that it cannot automatically fix the problem.
Does that mean you have access to the Windows Recovery Environment?
If so, open a command prompt, run this, and let us know what message you get.
   bootrec /scanos
-Jerry

Similar Messages

  • Satellite L505D-SP69​05R wont start

    Hi,
    I have a laptop as described in the subject running Windows 7 (32 bits).
    After a windows update process run automaticaly by the system last week, computer started to work erratically, causing two major issues i have not been able to solve yet.
    1 - Whenever computer boots, it shows the boot manager menu without pressing F12 or any other key. I tried to reset BIOS defaults but it did not work out, therefore now i always have to select the boot drive before i can continue working.
    2 - As soon as the message "Windows is starting" is shown on screen, computer freezes for 5 -30 secs making a very loud sound alert but showing neither an error message, blue screen nor accepting any other keyboard command. After the sound ends, windows finishes loading and i can continue working normally.
    - I tried to repair windows but it did nothing
    - I tried to run a "clean start up" as suggested by Microsoft but it did not work out as well
    - I veryfied the HD and it is OK ( with both Toshiba's utility and CHKDSK )
    One funny thing i discovered is that if i press F8 to load the windows startup options menu, and then i choose "Start windows normally", the computer wont freeze or make any sound.
    I would appreciate if anyone can help me out with this,
    Gustavo. 

    It sounds like a hard drive issue.  Do you know anyone you can borrow a drive from?  If so, you can try installing windows to it and see how it works from there.
    if it works fine with a test drive then it just needs a new hard drive and they are very easy to replace.
    A Windows update should have no effect on the bios, but a bad hard drive can cause that behaviour.
    Welcome to the Toshiba user forums.
    For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
    Being super active is never a requirement

  • Linux on Satellite L505D-S5992

    Does anyone know how to get linux (preferrably Linux Mint 7 or 8....however, any linux would be great at this point) onto a toshiba satellite L505D-S5992 Laptop?  I have tried booting from a cd and usb.....it will boot after a verrrrrry long time with a usb....but nothing works (mouse, keyboard, etc....).  Any suggestions would be greatly appreciated.  Thank You in advance.

    Absolutely no problems running any recent version of Linux on my Toshiba.  Every version that was released since 2009 has worked like a charm and has detected every piece of hardware on it.  But then I have an INTEL based laptop instead of an AMD based one.  That makes a LOT of difference.  It has nothing to do with Toshiba, only with what chipsets you have on your laptop. 
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Satellite U920 ultabook-tablet wont start

    Hi everyone.
    Just purchased the new Laptop/tablet 3 days ago.
    Other than Windows 8 fustrating me death, the computer is wonderful..
    until today.
    Wont start !!
    Lights come on... but now ones home..
    I tried it with the battery as well as mains power.
    When I press the start button...
    the 2 / lights come on as usual.
    Keyboard lights come on as well.
    An thats about all that happends..
    Eventually, after a minute, the computer will beep 3 times slowly then shut down.
    No screen at all.. not even a light from the monitor..
    Pretty annoyed as its only 3 days old...
    Any advise ??
    Cheers... Rob... Sydney

    > Just purchased the new Laptop/tablet 3 days ago.
    The new notebook should function properly if its not the case, then either the hardware or software cause the problem.
    I think its hardware so why you dont get in contact with your notebook dealer and ask for new notebook.
    Replace this unit and test the new one

  • Satellite P300-156: Vista wont start after installation of Toshiba Tempo

    Hi
    I have a new Satellite P300-156 which I have been using for about a month with no problems. It has been great.
    This morning I had a message come up to install Toshiba Tempo which I did and all was fine until I restarted the laptop and now Vista wont start.
    I have followed all the diagnostic tools, tried system restore etc... but still nothing.
    I currently live in Italy, so is hard to take it into a computer repair shop as I dont speak Italian and the operating system is in english.
    From what I can see my only option now is to do the TOSHIBA HDD Recovery, but I would loose some data which I have done since my last backup. Is there any way to backup data to a usb storage device using command promts before I do this, or is there a simpler way out of this?
    Any advice would be great.
    Thanks
    Keith

    Hi
    Thanks for getting back so soon, however, F8 does nothing when starting. I have an option of F2 or F12, but neither gives me options to access last known good configuration.
    Is that the same as a system restore from the Vista system recovery options as I have tried this (gives you a list of last known configurations). But still no luck.
    If I do the TOSHIBA HDD Recovery function do I need a disc for this?
    thanks

  • (2) Lenovo B575 Windows wont start

    bought lenovo b575 last week in Bestbuy as a gift for my father-in-law. Since it was on sale, I decided to get one for my self too. Both laptops were working the way they suppose to work until yesterday, mine turns on but  windows wont open, and then i recieved a call from my father-in-law saying the same thing happen to his laptop..
    Any idea? Is this a common problem w/ lenovo?  Not even a week old from the date  purchased...Should I call Lenovo or Bestbuy w/ this kind of issue?
    Thanks
    arvzs1

    Hi
    Welcome To Lenovo Community
    I would recommend to contact Lenovo support , they will help in getting this fixed
    Hope This Helps
    Cheers!!!

  • Windows wont start, Recovery Disk asking for another disk, only can with 2

    My son was surfing the web when IE stopped responding.  Window would not close so he held the power button until the laptop shut off.  When he tried to start laptop again, could only get as far as the windows loading bar, but it would not load.  After unsuccessfully trying a StartUp Repair we used the Recovery & Application Disk, holding down the C. After it appeared to run succesfully we got a boot manager missing error.  So we tried the Recovery Disk again.  Now it just continues to ask for additional disk but the Recovery Disk set is only two disk set.  This is a L305-s5875 Satellite that we have had for about 11 months.  If anyone has any suggestions we would greatly appreciate it. 

    Try cleaning disk with alcohol,with soft tissue paper.That is what i did to get disk to work.
    Also try and hit start and F12 and then change boot menue to Cd/Dvd insted of hardrive
    and then hold down c or try without holding down ckey.As a last try start cimputer and hold
    gown the statr buton and 0 (ie zero)  together for 1 min and see what happens.
           Yours trily ,
                Alex
    P.S.Good luck

  • Satellite L505D-S5992 croaked....help please...

    Deployed Soldier in need of assistance. My 6 month old laptop went into hibernation, when I touched the power button it started to come on then just shut down (like it lost all power). When I tried to start it again it took me to the "start windows in safe mode" view.
    I pressed enter to restart Windows, about the time the Windows 7 logo appeared on the screen it shut down in the same manner as before. I attempted this three more times with the same results. I would happily send it back to Toshiba but it was a work for trade deal and I have no proof of purchase, it was never registered and Toshiba already told me no.
    I have gone through multiple forums and believe that the problem is the motherboard. Just looking for some assistance in confirming this before I purchase a new one. Also, when I plug the AC power cord in the LED does not illuminate showing it is plugged in. I have disassembled the laptop in hopes to find something that looks out of order but nothing, any tips or assistance on what to look for would be helpful.
    Thanks

    http://www.insidemylaptop.com/repair-damaged-power-jack-toshiba-satellite-l305-l355-laptops/
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • I Tunes for WIndows wont start after upgrade to 8.0.1

    I recently upgraded to iTunes 8.0.1.11. After upgrade, if for some reason I need to reboot my computer iTunes will not start. It took forever to finally figure out what it was. I couldn't sync my iPod, could not get on to iTunes , etc. I finally had to try to uninstall Bonjour to make it come up. The problem is that I can never fully uninstall Bonjour. It says I do not have sufficient privileges. It will be ok until I have to reboot again or turn off my computer. I then have to try to uninstall bonjour to make it come up again. Is there a fix for this bug so I don't have to go through the same procedure every time I reboot?

    As far as the sufficient privileges go.
    You may wish to temporarily disable User Access Control (UAC)
    This should then give you permission to complete the uninstall process like you have been doing. Also ensure you are an Administrator user on the account. That right away will cause the message to appear if you are not.
    You want to ensure this gets turned back on if you do not have adequate security protection such as
    -Firewall Software
    -Anti Virus Software
    -Spyware/Adaware Software
    To Turn UAC off in the easiest way possible
    -Launch Control Panel
    -Launch User Accounts
    In this Window you will see an option called "Turn User Access Control ON/OFF" Click on this. A simple pop up window will appear. If it has a check mark in the box. Un-check it. Reboot. UAC is now off.
    Windows security will notify you of this. Feel free to ignore it while you try to uninstall again. Repeat the steps above to turn it back on when you are ready.
    By any chance have you tried a Basic Uninstall of Apple Software? and then Run the iTunes Setup file in Administrator Mode?

  • Windows wont start?

    Hello i was wonderin if anyone can help me, when Windows XP tries to load, I get the following message: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this." My options are:
    Start in safe mode.
    Safe mode with networking.
    Safe mode with command prompt.
    Last known good configuration setting (most recent setting that worked).
    Start Windows normally.
    I cant use my laptop. I have no idea what happened, i was just working on microsoft excel and the laptop just knocked itself off. Sometimes when i try to restart it again windows loads to a certain point but then knocks itself back off again. I have an up to date norton 07 and spyware detector.
    Can anyone help?

    When i select any of the options it loads for a few seconds and then knocks off again so i cant access windows at all. The prblem is that there is stuff on the hard drive that i need. I was given a disc 'knoppix' a linux os that runs directly from the disc and was told i might be able to run this dvd on my own laptop and connect it to another laptop to save the files i need onto that one before reinstalling windows.
    Do you know how to do this?

  • Hp pavillion windows wont start

    Hi..Thank you for responding...i'm not concerned with anything that is on thecomputer as i'm willing to start over. i'm really hoping just to get it going in decent condition. i remembered also i used tweaking.com just before last good startup and i noticed when it was running repair on all the hkey user..hkey current user etc..it said failed wildcard..i hope that helps..thank you

    Hi 1rooby2,
    As I understand you would like to perform HP System Recovery on your unit, based on the previous forum post I find you have a HP Pavilion dv5 notebook with Windows Vista Operating System. Please click on the web link given below should be able to help you to resolve the issue on your unit. 
    Performing an HP System Recovery (Windows Vista)
    Please follow the steps under “Starting a recovery from the hard drive and the computer is off”.
    If in case you are unable to perform these steps the only option is to perform HP System Recovery on your unit using HP Recovery Disc (Either created by you or Purchased from HP). To perform the recovery from Recovery Disc please follow the steps under “Starting the recovery from recovery discs” from above document.
    If in case you do not have the Recovery Disc you can order the same by click here and follow steps mentioned under “Ordering a recovery kit from HP in the United States and Canada”.
    For any further assistance please feel free to contact HP using below details.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    *Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    * Click on "Purple Thumbs up" button to the left side of my post to say thanks!
    Regards
    Ahmed

  • Windows wont start up

    Hi,
    Just bought a new Imac in the last week and am already having trouble getting Windows 7 (which installed perfectly on my '08 Macbook) to get going.
    I install everything without any problem at all, during the install the Mac restarts a few times - no problem. The issue is, once the install is finished (when i have just set the time and date ready to begin) Windows says 'Welcome' and then 'Shutting Down'... I assume ready for one final restart. When it loads back up it says "press any key to boot from disc" which i leave for it to boot straight into Windows. But it doesn't. It does nothing. Even if i try to press a key to go back in to the disc it does nothing. If i manually reboot using the option key and try loading windows it will just sit there with a flashing underscore on the same black screen. (I seem to remember it doing this for a while the first time i booted windows on my macbook, with the exception, this one never loads)
    I though my problem was to do with my bluetooth keyboard/ mouse not doing anything due to the lack of drivers but i've tried with a USB keyboard and mouse to no avail.
    On my 3rd install now and it's getting a little frustrating. Any suggestions?
    Thanks,
    Martyn

    Hooray! For anyone that has this problem too, here's the solution that worked for me:
    Solution 3:
    If you applied solution 2 and you still have problems, try the steps below.
    Solution 2 will make the Windows 7 DVD have the option "Repair your computer" for those who can't see it.
    Repair startup issues
    1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
    2. Press a key when you are prompted.
    3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
    5. Click Repair your computer.
    6. Click the operating system that you want to repair, and then click Next.
    7.In the System Recovery Options dialog box, click Command Prompt.
    Type (these commands are safe - more information)
    Code: Bootrec.exe /FixMbr
    Code: Bootrec.exe /FixBoot
    Code: Bootrec.exe /RebuildBcd
    Press ENTER after each command.
    Restart your computer.
    That should do the trick! However if you still can't start Windows, then follow step 1 to 6 again and type these commands.

  • Satellite C55-A-1MW wont start with new RAM inserted

    Hey .
    I hope to find someone that can help me.. I've bought ram-memories and tried 4 different memories in my Satellite C55-A-1MW. But every ram card I insert makes the computer unable to start.. it will light up just to shut down again.
    Is there some compability issue or anything? I've used 2 different aData Ram extensions car, 1 4gb and 1 2gb . the 4gb card was 1333 mhz and the 2gb card was 1600mhz. and i've tried 2 different corsair cards 4gb 1600mhz.
    Is it something that makes it only able to extend the RAM with Toshibas own memories or is the second cardslot for RAM memory broken?

    As I can see you use RAM modules with different specifications. Your problem is definitely RAM compatibility problem and you should use RAM modules with the same specification.
    According notebook specification there are 4 memory slots and notebook can handle up to 32GB of RAM.
    Compatible RAM modules are:
    4GB DDR3L-1600 - PA5104U-1M4G
    8GB DDR3L-1600 - PA5104U-1M8G
    Of course you can use modules from other manufacturers but please don't use some cheap products. I can recommend you usage of Kingston memory modules.

  • My Satellite L50-A-1D9 wont start

    My laptop can start. The power button does not work and there is no any light signals when it is connected to charge. Any thoughts? How can I remove the battery.
    The laptop is satellite L50-A-1D9

    Hi
    On your notebook model you cannot remove battery. It is placed under the bottom cover and it should be removed by authorized personal only.
    But your model has force shut down hole that you can also use for notebook reset. How it works you can read on https://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm
    Please test it. I hope this will help you

  • Equium L40 - Windows wont start, message on screen

    Hi
    I have a Toshiba Equium L40 - 17M.
    Recently when updating my virus protection my computer tried to restart but now wont load properly.
    Now everytime i try to switch the computer on, after the initial Toshiba setup screen I am greeted with the following message in the top left corner of the screen.
    A disk read error occured
    Press Ctrl + Alt + Del to restart.
    However, this message just appears again!
    Any suggestions please!?

    It could be a file system corruption problem, in which case you can connect the HDD to another PC and run CHKDSK on the drive.
    If that's no help, then check the HDD for bad sectors using the Advanced Test in Hitachi DFT (Google is your friend)
    Or you can try running Recovery from your Recovery Discs. This will format the HDD, so you will need to backup your data first if its still there (you can use a USB 2.5" HDD Adapter).
    If you really need your data back, there are Data Recovery programs you can download to search the HDD for the lost files.

Maybe you are looking for

  • Cant open password protected numbers 09 file

    I created a Number 09 file and protected it with a password. IT worked for months but now everytime I try to open it I get this error message "THIS DOCUMENT CA NOT BE OPENED". I'm pretty certain its the right password, and its not giving me wrong pas

  • Can't start mobile device service error 1503

    I'm using win7 .. I recently tried to sync my iphone4 with the itunes And a message poped up say " can't start mobile device" sth like that Then I followed some solution on the apple webiste.. But when I try to restart the service.. It said " Error 1

  • Reg. the Business Service and Business System(Integration Directory).

    Hi,         I have a small doubt reg. the Business Service and Business System. When do we need to go for creating a Business Service AND a Business System? I want to know the difference b/w them and the usage of a Business Service as compared to a B

  • HT201210 solution for resolving 1015 error?

    an error 1015is ocuring at the end of updating iphone 3g. how to resolve errorr??? plxx need help..

  • How can I correct the exposure on a face in photoshop

    This image is a nightmare. I need to adjsut the exposure on the face but can't get it to look natural. I have tried Select colour range and have played with the levels but nothing looks right. Any suggestions?