My satellite R15-S822

Hi, I'm Carla. I have three problems and don't know if they are related. My sound has been gone for a long time. I have reinstalled the drivers and it doesn't help. Also the computer doesn't work by battery any more only when I use the electrical adapter. Lastly, the upper left side of of the machine and the adapter bboth get very, very hot (even when it is on a cooling Pad). I have been putting ice packs on it to keep it cooled down when I use it. Someone told me if I get a new battery that will solve all the problems. Is that true? Thanks for your help.

the battery could have a lot to do with it. if it has gone defective that would be why you cant run on battery alone. but i wouldnt go as far as saying that would fix all of your problems because there can be many things wrong just pointing toward the battery. if you know someone with the same model laptop or same type of battery i would suggest trying theirs to see if it works before dishing out the money for a new battery.
hope that helps
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Similar Messages

No sound Satellite R15-S822

After uninstalling Disney's Alice in Wonderland game, I no longer have sound. I am running XP-sp2. I also lost my keyboard and am using the input panel to type this. HELP!
Chris
Solved!
Go to Solution.

OK, I was able to reload SoundMax from the recovery disk and it first had to restart the MS audio system, then re-boot and finally reload SoundMax. It did this all automatically, which was great. I then unistalled the Keyboard from Control Panel, then Add Hardware, Keyboard, and now it's working just fine. It only took me 24 hours to figure this out. I must be losing my touch (or my mind!)
Chris

R15-S822 pen driver

my tablet pen is not working. when i tried to find the driver it gives me option to open the file with "dat".
ca anyone help me to fix this problem.

Satellite R15-S822
You might want to try the driver from Wacom.
-Jerry

Toshiba R15-S822

I'm guessing this is the best place to post this issue. I have a Toshiba R15-S822 I have an issue that isn't isolated to Archlinux, but I figured you guys would be the best able to help me.
First, let me tell you a bit about this setup:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 146G 8.5G 130G 7% /
none 498M 0 498M 0% /dev/shm
/dev/sda1 31M 9.4M 20M 33% /boot
dmesg
Linux version 2.6.24-ARCH (root@artin) (gcc version 4.2.3) #1 SMP PREEMPT Wed Feb 27 01:15:32 CET 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ef50000 (usable)
BIOS-e820: 000000003ef50000 - 000000003ef60000 (ACPI data)
BIOS-e820: 000000003ef60000 - 000000003f000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
111MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 257872) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 257872
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 257872
On node 0 totalpages: 257872
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 222 pages used for memmap
HighMem zone: 28274 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F01E0, 0014 (r0 TOSHIB)
ACPI: RSDT 3EF50000, 0034 (r1 TOSHIB 750 970814 TASM 4010000)
ACPI: FACP 3EF50060, 0084 (r2 TOSHIB 750 20030101 TASM 4010000)
ACPI: DSDT 3EF50118, 4619 (r1 TOSHIB A0025 20041222 MSFT 100000E)
ACPI: FACS 000EEE00, 0040
ACPI: SSDT 3EF54731, 0231 (r1 TOSHIB A0025 20040908 MSFT 100000E)
ACPI: DBGP 3EF500E4, 0034 (r1 TOSHIB 750 970814 TASM 4010000)
ACPI: SSDT 3EF54962, 1052 (r1 TOSHIB A0025 20041222 MSFT 100000E)
ACPI: DMI detected: Toshiba
ACPI: PM-Timer IO Port: 0xd808
Allocating PCI resources starting at 40000000 (gap: 3f000000:bfc10000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000ee000
swsusp: Registered nosave memory region: 00000000000ee000 - 00000000000ef000
swsusp: Registered nosave memory region: 00000000000ef000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255858
Kernel command line: root=/dev/sda3 ro vga=773
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (017f0000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 598.513 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1016204k/1031488k available (2494k kernel code, 14572k reserved, 853k data, 308k init, 113984k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc044b000 - 0xc0498000 ( 308 kB)
.data : 0xc036f82f - 0xc0444cdc ( 853 kB)
.text : 0xc0100000 - 0xc036f82f (2494 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1198.83 BogoMIPS (lpj=1996534)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0e00)
CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd56a, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region eec0-eeff claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnpacpi: exceeded the max number of IO resources: 40
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3ef4ffff could not be reserved
system 00:00: iomem range 0x3ef50000-0x3ef5ffff could not be reserved
system 00:00: iomem range 0x3ef60000-0x3effffff could not be reserved
system 00:00: iomem range 0xfec10000-0xfec1ffff could not be reserved
system 00:00: iomem range 0xfeda0000-0xfedbffff could not be reserved
system 00:00: iomem range 0xffb80000-0xffbfffff could not be reserved
system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:08: ioport range 0x1e0-0x1ef has been reserved
system 00:08: ioport range 0x480-0x48f has been reserved
system 00:08: ioport range 0x680-0x6ff has been reserved
system 00:08: ioport range 0xd800-0xd87f has been reserved
system 00:08: ioport range 0xd880-0xd89f has been reserved
system 00:08: ioport range 0xe000-0xe07f has been reserved
system 00:08: ioport range 0xe080-0xe0ff has been reserved
system 00:08: ioport range 0xe400-0xe47f has been reserved
system 00:08: ioport range 0xe480-0xe4ff has been reserved
system 00:08: ioport range 0xe800-0xe87f has been reserved
system 00:08: ioport range 0xe880-0xe8ff has been reserved
system 00:08: ioport range 0xec00-0xec7f has been reserved
system 00:08: ioport range 0xec80-0xecff has been reserved
system 00:08: ioport range 0xeeb0-0xeebf has been reserved
system 00:08: ioport range 0xeec0-0xeeff has been reserved
PCI: Bus 2, cardbus bridge: 0000:01:0b.0
IO window: 0000b000-0000b0ff
IO window: 0000b400-0000b4ff
PREFETCH window: 4c000000-4fffffff
MEM window: 50000000-53ffffff
PCI: Bridge: 0000:00:1e.0
IO window: b000-bfff
MEM window: cfe00000-cfefffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:01:0b.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1539k freed
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 1536k, total 16192k
vesafb: mode is 1024x768x8, linelength=1024, pages=20
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
00:09: ttyS0 at I/O 0x338 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.6[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
Freeing unused kernel memory: 308k freed
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xafa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xafa8 irq 15
ata1.00: ATA-6: ST9160821A, 3.ALC, max UDMA/100
ata1.00: 312581808 sectors, multi 0: LBA48
ata1.00: configured for UDMA/100
ata2.00: ATAPI: UJDA750 DVD/CDRW, 1.60, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA ST9160821A 3.AL PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM MATSHITA UJDA750 DVD/CDRW 1.60 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0xcfefe000, irq 11, MAC addr 00:0e:7b:8d:12:95
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 52640 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/virtual/input/input3
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/virtual/input/input4
ACPI: Power Button (CM) [PWRB]
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18-p1
toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THRM] (26 C)
Marking TSC unstable due to: TSC halts in idle.
Time: acpi_pm clocksource has been installed.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Linux agpgart interface v0.102
agpgart: Detected an Intel 855GM Chipset.
agpgart: Detected 16252K stolen memory.
USB Universal Host Controller Interface driver v3.0
agpgart: AGP aperture is 128M @ 0xd8000000
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000cfe0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000cf80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000cf60
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xcffffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
intel_rng: FWH not detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input5
input: PS/2 Mouse as /devices/virtual/input/input6
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input8
ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
Yenta: CardBus bridge found at 0000:01:0b.0 [1179:0001]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:01:0b.0, mfunc 0x01aa1b02, devctl 0x64
Yenta: ISA IRQ mask 0x00f8, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xb000 - 0xbfff
cs: IO port probe 0xb000-0xbfff: clean.
pcmcia: parent PCI bridge Memory window: 0xcfe00000 - 0xcfefffff
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:0b.2[C] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[cfefd800-cfefdfff] Max Packet=[2048] IR/IT contexts=[4/8]
sdhci: SDHCI controller found at 0000:01:0b.4 [104c:8034] (rev 0)
ACPI: PCI Interrupt 0000:01:0b.4[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
mmc0: SDHCI at 0xcfef7f00 irq 11 DMA
mmc1: SDHCI at 0xcfef7e00 irq 11 DMA
mmc2: SDHCI at 0xcfef7d00 irq 11 DMA
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000039000099c2cf]
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
EXT3 FS on sda3, internal journal
Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
Clocksource tsc unstable (delta = -304935550 ns)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:02.1 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 1
eth1: no IPv6 routers present
lsmod
Module Size Used by
i915 22144 2
drm 70548 3 i915
ipv6 248388 8
ext2 62472 1
joydev 9664 0
pcmcia 32556 0
rtc_cmos 7584 0
rtc_core 15496 1 rtc_cmos
rtc_lib 2944 1 rtc_core
firewire_ohci 16128 0
firewire_core 36544 1 firewire_ohci
crc_itu_t 2304 1 firewire_core
sdhci 15364 0
mmc_core 43524 1 sdhci
ohci1394 28848 0
ieee1394 79800 1 ohci1394
yenta_socket 23052 1
rsrc_nonstatic 11008 1 yenta_socket
pcmcia_core 32664 3 pcmcia,yenta_socket,rsrc_nonstatic
video 16016 0
output 3200 1 video
psmouse 36496 0
serio_raw 5636 0
pcspkr 2944 0
shpchp 29460 0
pci_hotplug 26528 1 shpchp
ehci_hcd 32524 0
uhci_hcd 22672 0
intel_agp 21780 1
agpgart 27352 3 drm,intel_agp
sg 26640 0
thermal 13084 3
evdev 9344 5
cpufreq_userspace 3796 0
cpufreq_ondemand 7180 0
cpufreq_conservative 6664 0
cpufreq_powersave 1920 0
cpufreq_stats 5016 0
freq_table 3984 2 cpufreq_ondemand,cpufreq_stats
processor 29400 2 thermal
toshiba_acpi 6680 0
fan 3844 0
button 6544 0
battery 10756 2
ac 4612 0
snd_intel8x0m 14092 0
snd_seq_oss 29440 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 47056 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6924 2 snd_seq_oss,snd_seq
snd_intel8x0 28572 3
snd_ac97_codec 95268 2 snd_intel8x0m,snd_intel8x0
snd_pcm_oss 37024 0
snd_pcm 68996 5 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 19204 3 snd_seq,snd_pcm
snd_page_alloc 8072 3 snd_intel8x0m,snd_intel8x0,snd_pcm
snd_mixer_oss 14464 2 snd_pcm_oss
snd 44772 12 snd_intel8x0m,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6368 2 snd
ac97_bus 2176 1 snd_ac97_codec
ipw2200 138184 0
ieee80211 30664 1 ipw2200
ieee80211_crypt 4992 1 ieee80211
eepro100 26768 0
e100 32396 0
mii 4864 2 eepro100,e100
usbcore 125292 3 ehci_hcd,uhci_hcd
ext3 121992 1
jbd 43412 1 ext3
mbcache 6912 2 ext2,ext3
sr_mod 14884 0
cdrom 33824 1 sr_mod
sd_mod 22656 4
pata_acpi 5248 0
ata_piix 14724 3
ata_generic 5252 0
libata 138352 3 pata_acpi,ata_piix,ata_generic
lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
01:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 83)
01:0b.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
01:0b.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
01:0b.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=(e100 eepro100 mii ipw2200 ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-intel8x0 snd-intel8x0m soundcore ac battery button fan toshiba_acpi acpi_cpufreq cpufreq_stats cpufreq_powersave cpufreq_conservative cpufreq_ondemand cpufreq_userspace)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="Naabal"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
# Do not use for wireless interfaces. See Network Profiles below.
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
NETWORKS=(auto-wireless eth1)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal cpufreqd alsa autofs @network net-profiles netfs crond gpm slim mpd)
# End of file
Mount:
/dev/sda3 on / type ext3 (rw)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
none on /dev type ramfs (rw)
none on /proc/bus/usb type usbfs (rw)
none on /dev/pts type devpts (rw)
none on /dev/shm type tmpfs (rw)
/dev/sda1 on /boot type ext2 (rw)
automount(pid6527) on /media type autofs (rw,fd=4,pgrp=6527,minproto=2,maxproto=4)
Now, when I try to reboot or shutdown my machine, the system doesn't want to shutdown. The screen will blank, no input will be accepted from the keyboard, and my fan will kick on full blast and stay that way until I force shutdown by holding down the power button. I'm not sure what is causing this, but I'd really like some help in figuring this out.

Now once again, booted fine in morning, left machine on all day to charge CMOS battery, at around 7PM last night opened explorer window and window started sticking again when attempting to move window, start menu click would open then immediately close start menu.
I know I have a shot battery (above happens with or without battery installed) and with NEW power supply plugged in. dxdiag.exe reports NO PROBLEMS. Neither does hard drive check or any Toshiba diagnostics...
I am really stumped here...
I bought this R15 in fall of 2005 - could this possibly be a bad CMOS battery?

R15-S822 is 48 bit lba compliant or not?

Hi, does anyone know if the R15-S822 is 48-bit lba compliant? I recently installed a 320gb WD HDD and of course it overwrote the os in a day. Now I'm not sure it's the R15's fault, or if "enablebiglba" was set in winders xp...
I've searched for hours for the answer to this, but no clue have I found. I really thought this was a thing of the past...
Thanks!
Lary

Ok, so I spent the $12 over at 48bitlba.com for their bios testing utility, and it says the tosh's bios is compliant. So, it's time to reinstall XP from the recovery disk and check that "enablebiglba" was indeed not enabled.

R15-S822 Sound Drivers Help!!!

Hi everyone. Last night I reformatted my wifes laptop using an OEM copy of Windows XP. I've found all the drivers that I need from the toshiba site EXCEPT for the sound drivers. My device Manager is saying my Multimedia Audio Controller needs a driver. The funny thing about this is that on the Toshiba driver download page they only have a device driver made for Windows Vista and not XP. But the laptop came with XP originally. Please help me find this driver and get this woman out of my ear!!!!
Laptop model-    R15-S822   Toshiba Satellite

Satellite R15-S822
This one for Tablet Edition should work.
   Analog Devices Sound Driver for Windows XP Tablet Edition, 5.12.01.5240U, 06/06/08
It would be best to restore the original contents of the hard disk from Toshiba recovery media.
   Order Toshiba Recovery Media
-Jerry

Toshiba R15-S822 hard drive cable connector

hello i have a r15-s822. i was installing the hard drive connector to the mother board connector but i think i may have damage it.. is there a way to repair this
thanks
Attachments:
110614-124908.jpg ‏85 KB

JoeyR wrote:
PhotoFast offered a SSD upgrade replacement for the Air which came with a USB reader for the SSD that was removed. Unfortunately, Apple put a stop to their offering:
http://www.macobserver.com/tmo/article/report_apple_stops_third_party_macbook_ai r_ssd_upgrades/
I've spent some time trying to see if I can track down the adapter alone, but everything I've found is only in reference to the above, unavailable, kit.
Yeah, I probably should have mentioned that in my previous statement. I've seen a couple of the adapters floating around on eBay.cn but they're usually insanely expensive (like $650+ USD). It's unfortunate too, I remember seeing the article on various tech blogs and thinking to myself: "I have to get my hands on that adapter."

Toshiba Satellite R15 - Help! Pen calibration goes crazy after hibernating and resuming the PC.

I have a Toshiba Satellite R15 laptop that I got off of ebay. This laptop is the kind with a flip-around screen so that you can use it in pen/tablet/stylus mode. When I got it, I installed a fresh copy of Windows XP SP3 on it, and installed all the necessary drivers from the Toshiba web site. Also I made sure to get the latest Wacom pen driver from the Wacom web site. Also, I got all the windows updates.
I can normally calibrate the display and the pen just fine using the Wacom tool in the windows control panel. I have the computer configured so that, when I flip the screen into tablet mode, the screen goes into a portrait-aspect configuration (tall instead of wide). This works fine and I can also calibrate the screen fine in this mode.
But if I hibernate and resume the machine (in "tablet" mode with the screen flipped around), after resume, everything has gone wonky with the pen. First of all, the pen moves as if the machine were in landscape mode still: An X motion of the pen produces a Y motion of the cursor, for example. If, then, I flip the screen back to regular-laptop mode, the X/Y direction is correct again, but, the calibration is way off, the cursor is two inches to the right of the pen. If I try to calibrate again when it's in this state, the pen is still off by two inches.
I did a google search, but, the only results I see are for people encountering this problem under Linux. I don't see any solutions for Windows XP users.
I emailed Wacom and they said to ask Toshiba. I can't email toshiba (no support email in their contact page), so I'm asking here. Can anyone help?

I ended up fixing this, by formatting the computer from scratch and installing Windows 7 instead of Windows XP. :-)
This works but there is a limitation: There are no updated Win7 video drivers from Intel for the Toshiba Sattellite R15. So you have to hack the XP drivers to work. Here are the instructions on how to hack the XP drivers to work on the Toshiba Satellite R15 running Windows 7:
http://www.groundstate.net/855GMWin7.html
But after that, everything is fine on the tablet.

Problems with Satelite R15-S822

I have toshiba satelite r-15 laptop, after it is on for a while the mouse starts sticking and windows seem to want to either not open or move back to their original position (when trying to move them). I replaced fan thinking that the CPU was over heating- but fan runs and changes speed appropriately, and I have done very thorough virus/spyware scans and system is clean. The most perplexing part: when drive is "nuked" and during OS install, hardware problem does not occur....???
Any ideas?
Thank you for your input.

The error occurs with or without mouse.
I nuked drive, then re-installed with Toshiba disk.
I updated all windows updates (except IE 8).
I removed unused Toshiba software offers (trial period software, anti-virus, etc).
I defragged machine
After this I started to get freeze up, and now I get error on boot:
check system. then press [f1] key.
When f1 key is pressed, it takes me to CMOS, but then keeps wanting to kick me out to "Quit without saving changes". Errors and functionallity appear to be time dependent...erg system seems to get more "sticky" the longer the computer is on. I suppose this must be hardware issue...I thought maybe the hard drive, but they are expensive and I dont want to be chasing my tail fixing this.
Thanks for input.

Nokia N80 Adobe Reader

To: The Administration and IT Managers,
Kindly advise when a PDF Viewer is made available for the "NOKIA N80 Symbian Ver 3.0".
Viewers available: WORD, EXCEL, PowerPoint,
Adobe Reader for Symbian Ver 3.0 "NOT YET AVAILABLE".
The world is waiting for it...
99% of business administrators ON-THE-MOVE, depend on there MOBILE DEVICES to access there Emails and VIEW ATTACHMENTS, using Network operators or wireless.
I also recommend your admin and IT management to use the N80, and I am sure they will understand.
Julio
Chairman

We are Registered and Legitimate electronics distributing and trading company operates within the sales of plasma tv, automotive, electronic,mobile phones, computer laptop notebook,video games and general industrial markets.
We operates from a largeheadquarters based in AE Drunen, Netherlands. From this base the Group controls operations across the world in both developed and developing economies.
Here is our company products catalogue for your interest and inquiry.
Nokia phone
Nokia N96 16GB....................$350usd
Nokia Aeon........................$520usd
Nokia N80........................$250usd
Nokia 8800 Arte..................$380usd
Nokia N95 8GB.............$300usd
Nokia N95...................$270usd
Nokia N81 8GB............$250usd
Nokia N81...................$200usd
Nokia E90 Communicator...............$240usd
Nokia 7900 Prism........$230usd
Nokia 7500 Prism........$210usd
Nokia 8600 Luna.........$220usd
Nokia 8800 Sirocco Edition.............$230usd
Nokia N800 Internet Tablet...........$250usd
Nokia 5300 XpressMusic.................$200usd
Nokia N76...................$220usd
Nokia N75.................$200usd
Nokia 5500 Sport......$200usd
Nokia N93...............$200usd
Nokia N93i...............$230usd
Nokia 8800...............$200usd
Nokia E60...............$190usd
Nokia E65...............$200usd
Nokia N73...............$180usd
Iphone 4GB .............$200usd
Iphone 8GB Version 1.1.3..........$250usd
Iphone 16GB Version 1.1.4..........$320usd
Iphone 3G New Edition Software 2.0...........$280usd
HTC phone
HTC Advantage X7500=====$300usd
HTC Touch Dual===$180usd
HTC TyTN II=====$300usd
HTC S710=====$200usd
HTC P3350====$200usd
HTC P3400====$200usd
HTC P4350====$230usd
HTC P3600i====$300usd
HTC P3600====$280usd
HTC P3300====$250usd
HTC TyTN====$280usd
Samsung phone
Samsung G800====$350usd
Samsung Serenata====$400usd
Samsung P520 Armani====$330usd
Samsung F700=====$300usd
Samsung U700=====$260usd
Samsung U600=====$230usd
Samsung U300=====$200usd
Samsung D900 Ultra Edition=====$250usd
Samsung X820 Ultra Edition=====$180usd
Samsung X830 / Blush=====$190usd
Samsung E900=====$180usd
Samsung F300 Ultra Music=====$190usd
Samsung F500 Ultra Video=====$200usd
Motorola Phones
Motorola RIZR Z10=====$350usd
Motorola ROKR E8=====$320usd
Motorola Razr2 V9=====$300usd
Motorola Razr2 V8.............$290usd
Motorola RIZR Z8=====$250usd
Motorola RIZR Z3=====$220usd
Motorola ROKR E6=====$230usd
Motorola SLVR L9=====$250usd
Motorola KRZR K1=====$200usd
Motorola KRZR K3=====$250usd
Motorola RAZR MAXX=====$220usd
Motorola RAZR V3i=====$200usd
Motorola RAZR V3xx=====$200usd
Sony Ericsson phone
Sony Ericsson XPERIA X1......$450usd
Sony Ericsson PXi............$400usd
Sony Ericsson P1.............$300usd
Sony Ericsso W960...........$300usd
Sony Ericsson W880......... $280usd
Sony Ericsson K810......... $250usd
Sony Ericsson W610......... $200usd
Sony Ericsson K550......... $165usd
Sony Ericsson K550im......... $200usd
Sony Ericsson W888......... $300usd
Sony Ericsson W830......... $220usd
Sony Ericsson W850......... $250usd
Sony Ericsson W710......... $225usd
Sony Ericsson Z710......... $260usd
Sony Ericsson W710i......... $190usd
Sony Ericsson Z710i .........$200usd
Sony Ericsson k790A......... $230usd
LG Phones
LG KE800 Chocolate Platinum...............$250usd
LG KE850 Prada...............$280usd
LG KE970 Shine...............$200usd
LG KG810...............$150usd
LG KG920...............$160usd
LG KU800...............$165usd
LG U400...............$200usd
Palm phone
Palm Treo 750...............$270usd
Palm Treo 750v...............$280usd
Palm Treo 700v...............$230usd
Palm Treo 680...............$180usd
Palm Treo 650...............$150usd
Video Game
Nintendo Wii Game Console .........$150usd
Playstation 3 (60GB).........$200usd
Playstation 3 (80GB).........$230usd
Nintendo DS.................$110usd
Game Cube Platinum..........$90usd
XBox 360 Game Console Core System..........$190usd
Sidekick Pager
D-Wade Limited Edition Sidekick 3.........$200usd
Diane von Furstenberg ... Gizmodo sidekick 3.......$200
LRG sidekick 3 special Edition...............$160usd
Sidekick 3...........$140usd
Sidekick 2..........$120usd
CANON EOS-1D Mark II-N 8 Megapixel Digital .......$550usd
Canon EOS-5D Digital , 12.8 Megapixels.......$600usd
Canon XH A1 1.67MP 3CCD Camcorder with 20x Optical Zoom .......$720usd
Canon XL2 3CCD MiniDV Camcorder w/20x Optical Zoom......$850usd
Canon XL1 Digital Camcorder Kit.......$800usd
Canon EOS 1D Mark II N 8.2MP Digital SLR Camera.......$1,250usd
Canon Camera Kit 1234B002..........$720usd
Canon EOS 30D Digital SLR Camera & Canon...........$650usd
Nikon D2X, 12.4 Megapixel, Digital SLR Camera.........550usd
Nikon D2Hs, 4.1 Megapixel, High Speed, SLR Digital Camera.......$620usd
Nikoa D200 Digital Camera..........$700usd
Nikon D300 12.3 MP Digital Camera with 18-135mm Lens...$850usd
PIONEER CDJ-1000 MP3 MK3 PLAYER...........$650usd
PIONEER CDJ-800 MP3 MK3 PLAYER............$500usd
PIONEER CDJ-800 MP3 MK2 PLAYER............$450usd
PIONEER DJM 1000..........................$570usd
PIONEER DJM 800...........................$480usd
PIONEER DJM 600...........................$400usd
PIONEER DVJ-X1 DVD........................$720usd
PIONEER DVJ-1000 Professional DVD Turntable...$800usd
PIONEER DVJ X1 Professional DVD Turntable.....$900usd
New Sony Vaio Laptops
Sony VAIO FS Series Notebook PC - VGNFS810W---$400usd
Sony VAIO T340P/L PMC-1.2GHz with Free Intel Mobile Kit---$700usd
Sony VAIO Z1RAP1 - Pentium M 1.5 GHz - 14.1" TFT---$900usd
Sony VAIO VGN-AX570G 1.86GHz Pentium M 750 1GB 160GB---$670usd
Sony VAIO BX660P Notebook - Intel Centrino Duo Core 2---$700usd
Sony VAIO VGN-BX640P51 Intel Core 2 Duo 14.1" SXGA+ ATI---$1,000usd
Sony VAIO VGN-BX540B02 Intel Pentium M 740(1.73GHz)---$510usd
Sony Vaio AR190 Intel Core Duo T2500, 1GB of DDR2 memory---$1,250usd
Sony VAIO VGN-C140G/B Notebook PC ---$460usd
New Toshiba Laptops
Toshiba Tecra M5-S433 14.1" Laptop Computer---$670usd
Toshiba Laptop computers Satellite r15-S822 Pentium---$1,200usd
Toshiba Laptop Tecra M7-S7311 Tablet PC ---$600usd
Toshiba Tecra M5-S5331 14.1" Laptop Computer---$700usd
Toshiba Qosmio G25-AV513 Laptop---$650usd
Toshiba Tecra A4-S211 Centrino Laptop Notebook PC---$1,000usd
TOSHIBA SATELLITE LAPTOP-- P20-102----$500usd
TOSHIBA SATELLITE LAPTOP-- M30-832----$400usd
TOSHIBA TECRA M2 40GB-- PM 1.5GHZ-- 14INCH-- WIFI-- DVD-CDRW----$500usd
New Dell Laptops
Dell Demo Latitude D800 15 Notebook/Laptop Computer...$800usd
Dell Inspiron 6000 ---$400usd
Dell Inspiron 8200 P4 1.6G---$450usd
Dell Precision M-70, Centrino, ---$440usd
Dell Inspiron 8200 P4 1.6G ---$500usd
Dell Latitude D820 Laptop Computer PC Notebook Computers --$620usd
Dell Latitude D820 Laptop Computer PC Notebook Computers--$750usd
Dell Inspiron 630m 1.8GHz Notebook/Laptop ... $790usd
Dell Inspiron 9400 2GHz Notebook/Laptop Computer...$800usd
Dell XPS M1710 (M2010S34) PC Notebook............$650usd
Dell XPS M2010 (M2010S35) PC Notebook............$750usd
Dell XPS M1210 (M1210S34) PC Notebook............$550usd
Dell XPS M1210 (M1210S35) PC Notebook............$600usd
Dell XPS M2010 (M2010S37) PC Notebook............$800usd
Dell XPS M2010 (M2010S35) PC Notebook............$780usd
New Samsung Laptops
Samsung Laptop 320P---$500usd
Samsung Laptop 400PNBLACK---$900usd
Samsung Laptop 400PX---$910usd
Samsung Laptop 243TSILVER---$990usd
SAMSUNG LAPTOP-- M40 HWM 745--$500usd
Samsung Q1(NP-Q1-V000) Intel Celeron M 353(900MHz) ---$900usd
New Apple Laptops
Apple Customized 13 MacBook Laptop Computer (Black) MacBook ---$600usd
Apple MacBook Black 2.0 + 100GB RAM---$950usd
Apple Customized 13 MacBook Laptop Computer with 2.0GHz---$810usd
Apple Macbook BLK 13i 2.0GHZ MA701LL/A---$740usd
Apple 15.4" 2.0GHz 100GB 1GB RAM Intel Mac

Freezing in startup

I have a Satellite R15-S822 that is just over 3 years old. The other day it started freezing during the startup process but after a few tries I was able to fully start my computer. It is now to the point that for the past 2 days I am unable to start my computer. It always boots to the point where I sign in the blue screen. Sometimes it freezes then and stays on the blue screen saying "loading your personal settings". Other times it goes further to the point of showing my desktop but never to the point of me accessing folders. I tried putting my hard drive in an external enclosure to save my files, but it won't let me access my files (I'm guessing because I use a password). Any advise as to how to at least save my files? I don't ind restoring my computer to original settings, but I really can't lose my files (I'm in graduate school and haven't been smart enough to backup folders of research). Please help!
Cheryl

hi cheryl!
try to boot to safemode by tapping f8 as soon as you turn on the computer. if you are able to login in safemode, you will be able able to save your files but if you are unable to do so, you need to have specialists backup your data for you. i think toshiba refers the CBL company to do data back. call them at 1-866-382-0633. hope this helps! Ü

Can't find XP audio driver for r15-822

Toshiba website only has the audio driver for vista on my satellite r15-822, but the original OS is windows xp Pro. I found drivers for everything else for windows XP but the audio. Any suggestions?
Message Edited by rumble1212 on 01-05-2009 12:49 AM

Satellite L755D-S5163 (PSK32U-0FU00N)
VEN_14F1&DEV_5069
So you have the Conexant 20585 smartAudio HD. The correct driver is offered by Lenovo here.
See this message in our forums for how to install it. You'll need to adjust the instructions for XP of course.
How get Stereo Mix on Conexant sound card SOLUTION
I can only help that much.
-Jerry

Reformatted R15 with XP, now drivers are missing and internet won't connect

Hello!
I obtained a Satellite R15 without recovery discs. I kept telling myself that I'd make a set but never got around to it. Recently, I began having problems with my MSOffice 2007 software. I tried to uninstall and reinstall but the files were corrupted and it didn't work. My next step was to purchase the Windows XP tablet edition operating software. I reformatted and installed the software. However, I had to reinstall it 3 times before I was able to get it actually reformat my hard drive. The new system is missing the help center for some reason and was also missing drivers. I went to the Toshiba download center and I downloaded every possible driver/program I could need for an XP operating system and installed them all. Some of them would not work because they wanted to connect to the internet. Some of them did not work because I'm missing an "rpc driver" . I also installed service pack 2 for XP but not service pack 3 because I don't have an internet connection. Initially, the modem, ethernet, sound, video and a few things did not have drivers. Now I have drivers for all of them except one - seems to be for shock absorption software and I can't find it anywhere. I need help.
1. I still cannot connect to the internet either through an ethernet or wireless
2. I'd like to have a help center again - I use it once a year or so, but it's nice to know it's there
3. I am still not able to install MS Office 2007
4. I'd like to get that software for the shock absorption.
Any advice would be much appreciated!

Is the HDD ok? I would run the Advanced test in Hitachi DFT to ensure is has no bad sectors.
Install the "Toshiba HDD Protection System" driver from the Toshiba website. Common Modules needs to be installed first, its very important.
Is the Office CD scratched? Does it work in other PC's?
Ultimately, you would want a Toshiba Recovery Disc, that way you can be sure the drivers are all installed properly. I believe you can get replacement discs from Toshiba.

Wacom makepkg fail

Hi,
I tried to compile linuxwacom with PKGBUILD from AUR and I get this errors:
make all-recursive
make[1]: Entering directory `/home/mutze/bin/linuxwacom/src/linuxwacom-0.7.4-3'
Making all in src
make[2]: Entering directory `/home/mutze/bin/linuxwacom/src/linuxwacom-0.7.4-3/src'
Making all in .
make[3]: Entering directory `/home/mutze/bin/linuxwacom/src/linuxwacom-0.7.4-3/src'
gcc -march=i686 -O2 -pipe -D__amd64__ -I/usr/include/ -fPIC -pipe -ansi
-pedantic -Wall -Wpointer-arith -fno-merge-constants
-I. -I/usr/include/xorg -Dlinux
-D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE
-D_XOPEN_SOURCE -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE
-DSHAPE -DXINPUT -DXKB -DLBX -DXAPPGROUP -DXCSECURITY
-DTOGCUP -DXF86BIGFONT -DDPMSExtension -DPIXPRIV -DPANORAMIX
-DRENDER -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV
-DSINGLEDEPTH -DXFreeXDGA -DXvExtension -DXFree86LOADER
-DXFree86Server -DXF86VIDMODE -DXvMCExtension
-DSMART_SCHEDULE -DBUILDDEBUG -DXResExtension
-DX_BYTE_ORDER=X_LITTLE_ENDIAN -D_XSERVER64
-DNDEBUG -DFUNCPROTO=15
-DNARROWPROTO -DIN_MODULE -DXFree86Module -DLINUX_INPUT
-o xf86Wacom.o -c ./xf86Wacom.c
In file included from /usr/include/xorg/xisb.h:32,
from ./xf86Wacom.h:67,
from ./xf86Wacom.c:103:
/usr/include/unistd.h:189: error: conflicting types for 'xf86ssize_t'
/usr/include/xorg/xf86_libc.h:86: error: previous declaration of 'xf86ssize_t' was here
In file included from /usr/include/xorg/xisb.h:32,
from ./xf86Wacom.h:67,
from ./xf86Wacom.c:103:
/usr/include/unistd.h:325: error: conflicting types for 'xf86read'
/usr/include/xorg/xf86_ansic.h:273: error: previous declaration of 'xf86read' was here
/usr/include/unistd.h:331: error: conflicting types for 'xf86write'
/usr/include/xorg/xf86_ansic.h:274: error: previous declaration of 'xf86write' was here
/usr/include/unistd.h:418: error: conflicting types for 'xf86usleep'
/usr/include/xorg/xf86_ansic.h:345: error: previous declaration of 'xf86usleep' was here
In file included from /usr/include/xorg/xisb.h:32,
from ./xf86Wacom.h:67,
from ./xf86Wacom.c:103:
/usr/include/unistd.h:935:29: error: macro "getpagesize" passed 1 arguments, but takes just 0
make[3]: *** [xf86Wacom.o] Error 1
make[3]: Leaving directory `/home/mutze/bin/linuxwacom/src/linuxwacom-0.7.4-3/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/mutze/bin/linuxwacom/src/linuxwacom-0.7.4-3/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/mutze/bin/linuxwacom/src/linuxwacom-0.7.4-3'
make: *** [all] Error 2
==> ERROR: Build Failed. Aborting...
Same with the changes mentioned in the ArchWiki: Toshiba Satellite R15 wacom tablet pc.
I have searched with google to solve my problem but I found nothing that could help me.
mutze

Hi,
solved it with using this patch.
mutze

No Audio device on G31M3-LV2

This one really stumps me. Just assembled a new system using G31M3-LV2 mainboard and installed Window XP Pro. I have no audio (HD audio is enabled in the BIOS). I have installed the Realtek drivers. When I go to Control Panel>Device Drivers>sound, video and game controller it shows all the usual audio codecs etc. but no audio device and when I go to the volume control is says "No Audio Device". I've tried everything and cannot install the audio device. Am beginning to think the audio portion of the mainboard is dead, everything else working perfectly.
after looking deeper in the forum I answered my own problem. Installed the microsoft audiobus and problem was resolved

Satellite R15-S822
Your sound driver is this one.
ADI AC97 Audio Driver for Windows Vista
-Jerry

My satellite R15-S822

Similar Messages

Maybe you are looking for