My scanner doesn't show up in the"please select a device list" windows 7 - HP7300 all-in-one

In acrobat X-my scanner doesn't show up in the "please select a device list" how do I get it to see my scanner? - windows 7 - HP 7300 all-in-one

In case anyone else finds this thread I did end up getting mine to work (after abut 48 hours of pulling my hair out). The "solution" was simple in my case, but it might have been a coincidence. I turned the wireless off on my phone for a different reason - then I when I turned it back on the device instantly appeared in spotify-desktop! I had already factory reset my phone, so I know that establishing a connection to the wireless was not the problem in the first place. Also, I was able to play music on my phone, so I know that it was hooked up to the wireless (I turned off 3g just to be sure).
But for some reason when I toggled the wireless off then on again - it worked. Go figure.

Similar Messages

  • HT204081 I'm an author and my book recently received a five star review on iTunes and it shows up on my desktop but it doesn't show up on the Mobile version of my listing.  How can I fix that?

    The book is priced low enough to be an impulse buy but without the postive reviews being posted on the mobile versions, people may not be encouraged to buy it.

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    Before that, back up your device, explained here:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    How to back up your data and set up as a new device
    You can check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • PHotoshop CS4 - scanner doesn't show up in File - Import

    Hello,
    I have an Epson Perfection 4180 scanner, and Photoshop CS4 extended and a Mac OSX 10.6.3.  I installed photoshop but the scanner doesn't show up under the File>Import menu. Normally it be there, i'd click it, and it launches the scanner within photoshop.
    I found some info on google which suggested to look in a  folder on the installation DVD called "Goodies"
    In there is a folder called Optional "Plug-Ins"
    In there is a folder called "Import-Export"Where i found a file called TWAIN.plugin
    I put the file into Adobe Photoshop CS4/Plug-ins/Import-Export but it still doesn't appear in photoshop file > import.
    Any ideas on what i should do?
    Many thanks
    Rossella

    Use the stand-alone application.
    And/or do a Forum search for »CS4 scanner« – that should turn up a couple threads.
    http://forums.adobe.com/message/2221702#2221702

  • Create PDF from Scanner - Scanner - Please select a device - Device not listed?

    My scanning device, Brother DCP-1510 is installed and working properly. According to the device specs it has TWAIN, WIA, ICA, SANE2 drivers.
    I can see and select the scanner in the native "Windows fax and scan" now it is connected to the computer. The device also works (scans OK, but without much functionality) using the default  "Control Centre4" ...
    I wish to use Acrobat to scan some documents to PDF
    In Acrobat the scanner is not listed in the "Please select a device"...
    What should I do? Any tips to get the said scanner listed in device list? 
    [ btw... Acrobat has listed two other scanners in the device list for which I have installed drivers, but these devises are located in other offices (on the other side of the state unfortunately) ]

    I am not sure which of the following did the trick...
    I downloaded the drivers (latest software included was the only new thing, the drivers were actually the same versions)... Then I reinstalled the whole package...
    I also followed the tips in Learn & Support and troubleshoot  Troubleshoot scanner issues item #4. Restart your computer with startup items disabled / and then turned on all the Adobe and Brother related ones (not the entire suite of apps and services)...
    After the reboot and reconnecting the scanner it is there!  - "Create PDF from Scanner" "Custom Scan" "Input" "Scanner" "Please select a device" - both the TW and WIA devices...
    What is the difference or advantages of choosing TW over WIA? maybe someone might chip in.. otherwise settled Thks!

  • I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itumr dongs come up. How do I get my original itunes library?

    I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itune songs come up. How do I get my original itunes library?

    Have you copied your content over from your old computer and onto the new on ? If not, and you still have your old computer, then there a number of methods described on this page which you can use to copy your library over : http://support.apple.com/kb/HT4527 . If you no longer have your old computer then have you got a backup of your content that you can copy onto the new computer and add into iTunes ?

  • MSI GT 70 ONC: Stereoscopic 3D option doesn't show up in the NVidiaControl panel

    Hi,
    I have MSI GT 70 ONC Laptop with NVidia 670M (2GB) graphics card. I also have Sony Bravia 3D TV.
    I can play 3d movies on laptop and can watch them on my 3d TV using HDMI cable fine although my laptop doesn't have 3d display.
    I am trying to use my laptop which doesn't have 3D display but has Graphics card which supports 3D to play 3d games and see them on my 3D TV.
    I checked online and found out that I need to change "Stereoscopic 3D" settings in NVidia control panel but Stereoscopic 3D option doesn't show up in the control panel. Very few options are there. I have updated drivers to the latest level but still can't see "Stereoscopic 3D" option in NVidia control panel. So will you be able to help me out what I can do to see the option? Thanks in advance.

    I have got an gs70. Exactly the same problem. Unfortunately this hdmi outputs are connected for the intel graphics cards. And intel does not support 3d.
    I was actually very angry with MSI. Because they do not mention in the description. They promot just the gtx card. And forgot to mention about the hdmi connection.
     Forget the 3d tv. Or you can buy an external mini pci-e graphics card adaptor.
    search in google for : EXP GDC Beast Laptop External Independent Video Card Dock

  • TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

    I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
    I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • Preview doesn't show up in the capture window

    When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

    Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
    One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

  • Mobile me gallery doesn't show up in the widget

    I posted some albums to mobile me through iPhoto.  When I tried to put them on the website through iWeb, there were no galleries in the widget menu.  Why?  Is it because my site is an independent ".com" site versus being a "me.com" site??  Help!

    klcwebdesign wrote:
    ...it still doesn't show up in the widget menu
    I dunno what more to suggest, except to say that MobileMe live chat support is now 24/7 — see this announcement:
    http://www.apple.com/mobileme/news/2009/04/live-chat-support-247.html
    And to answer your previous question, you can simply change the settings and republish. See this iPhoto Help page:

  • IBook doesn't show up in the Textbook section

    Hi Folks,
         I recently had my iTextbook approved through the iBookStore (Physics: Fundamentals and Problem Solving), but noticed that it doesn't show up under the Textbook --> Science and Nature section, even when I choose "See All."  Does anyone know how to get this moved to the correct section?  Thanks much!
    Dan

    So I've been waiting 10 days now for my iBooks Author textbook to appear. The upload went fine, but as of today, nothing appears on title search.
    I've noticed some folks mentioning they were approved through the iBookstore. Does that approval come in an emai? I see no status indicators in iTunes Connect to check on progress of releasing the title.
    Can anyone shove me in the right direction?

  • Trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

    trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

    David Why? wrote:
    ... How do you configure older Airports in OS X 10.7.5??
    Use the technique described in this thread: I can't install airport utility 5.6
    Though it discusses Mountain Lion, you need to follow the exact same steps for OS X 10.7.5.
    I no longer have any original AEBSs to test. You may need an even earlier version of AirPort Utility. If AirPort Utility 5.6 cannot configure yours, let me know and I will attempt to find the correct version for you. You will need to use the same "extraction" technique described above.
    Edit: If 5.6 does not work try this one: AirPort Utility 5.5.3
    Important: If you elect to drag that version to your Utilities folder, be sure to give it a unique name. I suggest "AirPort Utility 5.5.3" This is not necessary for AirPort Utility 5.6, which will retain that name on its own.

  • When i copy songs with home sharing it shows it copying but doesn't show up in the library

    When I copy songs with home sharing it shows it copying but doesn't show up in the library. What should I do ?

    Hi adtsalmon,
    You can only watch the movie on the device you rented it on. Here's a snippet from the Apple Support site (italics mine):
    If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
    If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
    Here's the link to the Movie Rentals FAQs site FYI:
    http://support.apple.com/kb/HT1657
    Hope this helps!
    Cheers,
    GB

  • HT1338 I'm trying to download java on my Mac machine but the software update doesn't show me anything. Please advise what I should do to get the application.

    I'm trying to download java on my Mac machine but the software update doesn't show me anything. Please advise what I should do to get the application.

    If you can run it under chrome, you have java installed.
    There was some malware that exploited an older version of Java (not javascript) running in a Browser. Since few people use it Apple turned off Java by default in the Safari Browser.
    If you need it for something, just turn it back on in Safari preferences (inside Safari). After a few months of non-use, you may find it has turned itself off again.

  • I purchased a game name Einstein and I can't see it , it doesn't show up in the menu!?

    I purchased a game name Einstein and I can't see it , it doesn't show up in the menu!?

    This may be related to the "feature" that displays all Greatest Hits albums as one album, or it may be that the tracks are marked as compilations. Find one of the missing artists in iTunes and select the tracks from the album. Make sure the Compilations flag is set to No. Change the album title to something unique, e.g. if it's called *Greatest Hits*, rename it to *Greatest Hits, Artist*. Resync your iPod and see if it helps. If so, repeat the treatment.
    tt2

  • When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black.  Why?

    When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black.  Why?  I can edit some photos, whereas others I can not.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

Maybe you are looking for

  • Get bind variables of a dynamic view object

    I seem unable to retrieve the bind variables for a dynamically created view object, even though I can do the same thing for a regular view object. Here is the code: newVO = repServ.createViewObjectFromQueryStmt("newQry",strSql); VariableValueManager

  • How do i set up a ring back?

    HOw do i set up a ring back on an 3GS i phone?

  • Project team for WBS-element

    1. How do I maintain the project team for the WBS-element and what is the practical implication of doing that? 2. How the project team at WBS level is related to Work Center resources at the network activity level? Thank you for input.

  • My Mac Mini late 2012 won't boot up!

    My Mac Mini late 2012 model with 500 GB and 4 GB won't boot up because I by mistake dropped it in the floor. I'm using OS X Yosemite. I've dropped it in the floor countless of times before but this time it just wont work. When I try to boot it up a p

  • Error when trying to enable usage rights

    Hi there! I have created a PDF form using Live Cycle via Acrobat Pro 8.0.0. This is to let colleagues and customers with only the Reader installed fill out the form and email. Everything works like a charm until I'm returning from Live Cycle to Acrob