My scene detect in Premiere cs3 on WIN 7, 64 bit is ghosted and can't turn on

I have my premiere cs3 on two computers one with xp pro and the other with win 7 64bit and I can't activate my scene detect on either operating system, I read manual and did some on line searches but it assumes in the tutorials it is already active. Am I doing something stupid or is there a way to turn it on
Joan

Yeah, sorry I should have been more specific. There is no way in Premiere to split it, which still amazes me. HDV split works great though. I just noticed the name of the OP, you would think that they would know that....
Phil

Similar Messages

I have finished a book in Aperture 3. When I press buy book a text comes up " empty text field detected in book" I have been through the book many times and can't find it. Can I over ride it at this stage the book wants to cancel

I have finished a book in Aperture 3. When I press" buy book' a text comes up " empty text field detected in book" I have been through the book many times and can't find it. Can I over ride it? At this stage the book wants me to cancel

I have been through the book many times and can't find it. Can I over ride it? At this stage the book wants me to cancel
Sure, you can override the warning and press "Continue" instead.
But you said "you have been through the book many times" - have you checked the pages in Aperture's book view or have you checked the preview of the book? I'd look at least at at the "Preview" of the Book - after pressing "Continue" you will see the "Preview" button when the next panel is shown. Look carefully at the preview of the book, if any text is missing.
If you are sure that you like what you see in the preview and no empty textfields show, you can proceed to buy the book.
Regards
Léonie

HDVsplit scene detect issue using CS3 export

Okay, I first used HDVsplit to read a HDV tape I made using CS3. It seemed to have some dropped frames at a number of places, so I decided to make a new tape. I had the m2t master files on my hard drive, so I decided to try to make a new tape. I used cs3 to export these files to my sony tape unit. No visible issues. But, when I used HDVsplit to try and read the tape, using scene detect, it looks like it thinks there is a scene detect break like every second. Never saw this issues with CS3 before. Any ideas?
Thanks
Dave

Dont use scene detect? Do you not like to manually capture?
Scene detect reminds of those old avid systems with the " auto edit" button. If it were only that easy.

Cannot install CS3 on Win-7 64-Bit

I have a brand new Win-7 64-bit system.
I still have the install files for CS3 Web Premium that I downloaded 3 years ago.
I have had various problems.
Installed at first and programs hung or failed to open.
I tried going back to a restore point and installing again.
I read somewhere this may have been a bad idea - don't know why.
However, my latest methodology has been:
Copy the install files to the new machine.
Deactivate the software on the old machine.
Extract the AdobePDF.dll_64 from the data1.cab
Ran the install. - pointing to the AdobePDF.dll when prompted.
Acrobat 8 and shared components installed but did not work.
Everything else says "Component Install Failed" - no other explanation or help.
Get the vista licensing patch and install it. - when I did this I was able to get Acrobat 8 to run and not hang.
Updated Acrobat to 8.1.3.
Tried the install again.
I still get "Component Install Failed" for everything. No idea why.
I have read through lots of stuff on the forums. Found out about the AdobePDF.dll_64 and the licensing patch.
Haven't found anyone else who tried going to a restore point. If that is my problem what do I do. I have restored a couple of times and cannot get back to where I was on the first install. Since I am just getting started, I could return to factory install on the machine and try again - but I only want to do that if it will actually work!! I having been at this for two days and I would like to move on!!

OK. It turns out the restore was in fact what killed me. The restore removed some, but not all, of the Adobe install I had tried. This was enough to screw up all future install attempts.
The restore point thing in windows sounds nice, but I guess it can be dangerous.
I had messed things up with all my install attempts, so I restored the machine to factory settings - a clean win-7 install - and then followed the instructions found here: http://forums.adobe.com/message/2335063 and it worked.

Installing PS CS3 with Win 7 64 bit

I will soon receive a new desktop pc with Win 7 64 bit as the OS. I plan on installing my existing copy of Photoshop CS3 on this machine. Are there any issues I need to be aware of in order to get a clean installation?
Thanks,
Ken
Some machine specs:
Intel Core i7-920 processor (8MB L3 Cache 2.66GHz)
12GB DDR3 SDRAM at 1066MHz
1024MB nVidia GeForce GT220
750GB Serial ATA 2 Hard Drive 7200 RPM
Genuine Windows 7 Home Premium, 64bit, English

>Windows 7 Home Premium
Too bad... if you were going to have Win7 PRO or Ultimate, you could use http://www.microsoft.com/windows/virtual-pc/download.aspx

ITunes 10.0.4.4 is stuttering at most HD videos (Win 8 64 bit). VLC and WMP works fine.

Hi,
i have a problem while i'm trying to setup my iTunes on Windows. iTunes 10.0.4.4 is stuttering at the most of my HD videos (Win 8 64 bit). On VLC and WMP all Videos are playing fine. My 3 years old Macbook PRO with much less computing power plays all my videos smooth. Unfortunately since i have a lot of iTunes stuff and iDevices i have and i wnat to use iTunes also under Windows 8 (64bit). The impossibility to play my movies smooth annoys me
Hope someone can help me Thanks!
My PC-Config:
Win 8 PRO with Windows Media Center
iTunes 10.0.4.4
CPU: i7 4400 3,3 Ghz Quad
RAM: 16 GB
SATA: 256 GB SDD Samsung
GraphicsCard: NVIDIA Geforce GTX 770 - 4GB

Hi TischKaskade,
If you are having issues with HD video playback in iTunes on your Windows machine, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Regards,
- Brenden

No scene detection in premiere?

Someway that the editing program can automatically detect and cut scene changing moments in a single video clip.
Does this function exist in premiere, or does it exist only in "capturing material in premiere" and "speedgrade (and using xml files to get it to premiere)"?

iMovie can do this automatically. FCE cannot.
The DV Start/Stop Dectection as already mentioned is the only way to break up long clips into Sub-Clips. This is a manual operation. An hours tape (capture) only tkes a few minutes when done correctly. The detection is based on jumps in the Clock Time of the tape.
Al

Error 1720 when installing CS3 on Win 7 64-bit home premium

I've been directed to the Forum for help as the Support Tech said she could not help me as they only help with CS5. She said that CS3 WON"T WORK on a Windows 7 machine and yet I have googled and found people who have had it work. She then told me that they will probably experience lag and other errors once they start using it more fully. I smelt BS right about then in that conversation. She couldn't confirm that if I purchased CS5 upgrade that my CS3 upgrade would qualify as upgrade. Yeah, I'm really going to spend $800 to find out (not).
Basically it ended where I either buy CS5 or go the Adobe Forums for help.
So okay here I am. Long post (sorry) but want to get all the fact out there.
I purchased CS3 back in 2008 and installed on my XP machine.
Just purchased a new laptop with Windows 7 64-bit home premium.
Tried to install CS3 and as soon as it tries to install I get this message:
Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance.
Error 1720. There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor.
I have tried the following solutions (found on Google), none of them work:
1) installing in safe mode (with just Windows features in the start up)
2) redownloading the files to ensure I didn't have a corrupted version
3) installing as Administrator
4) deregister/register Windows Installer
5) looked for update to Windows Installer but mine is up to date
6) checked that Windows Installer had "started" on my laptop (yes)
7) used Adobe cleanup utility
8) used Adobe licence recovery (Acrobat Pro (CS3) wouldn't get past the licence stage although it did install)
Support Tech lady said that no old CS software would work on Windows 7 BUT last night I installed Photoshop CS Version 8 and it installed perfectly. What I noticed different is that PS CS V8 used Installshield whereas CS3 I am told didn't use Installshield.
So I am left with my new laptop using PS CS V8 with Dreamweaver MX.
BTW Dreamweaver MX installed okay and it used Installshield too - so is that the reason CS3 won't install - it not using Installshield?
Does anyone have any solutions not tried above?
Am I just going to have to use old software on my Win7 machine?
Thanks in advance.
Sarah

Hi Bob,
Thank you for your reply.
Yes I have tried the CS5 Cleanup Tool - multiple times. Doesn't help.
I am surprised to hear that you installed with no problems in light of Tech Support being adament that it won't work on Windows 7 and is not supported.
I told Tech that I didn't accept that as there are probably hundreds of thousands of users with CS3 who have installed or tried to install on a Win7 machine and not everyone has hundreds of dollars spare to upgrade.
I only really use DW, PS and Acrobat in the Suite so I'm going to have to save to buy those products but it won't be anytime soon.
Thanks.
Sarah

Can't get CS3 to activate online or on the phone and can't get a human being via this website

I said it all in the header. Is anyone out there???!!!! I've been going in circles on this useless site for 30 minutes.

waypasthadenough wrote:
Do any Adobe employees actually look at this????????????
This is a user-to-user forum, so they are under no obligation to do so. However, in my experience, Adobe employees do occasionally pop their heads into some forums.
waypasthadenough wrote:
Are there any human beings out there?????????????
I'm a human! I can't help much, but I'm a human.
I can't see that link you posted - as it appears to be a direct message. Try posting a screenshot.
If you want help on these forums from people, sharing more information might also help. When you say that you can't get it to activate, what do you mean? What steps are you taking? What is happening in response to those steps? Are you getting error messages? If so, what is the text of those messages?
I mean, I don't have a copy of CS3 laying around the office to follow along (I mean, that's five versions ago!), but it's possible that some others here might. (I might actually have it at home though, now that I think about it. When I get home tonight, If I remember, I might give it a go)
I assume you've already gone through these steps from the Activation & Deactivation Help page:
Make sure that your computer is connected to the Internet.
Start the application.
Choose Help > Activate. (If this option is dimmed, you've activated your software)
Log in with your Adobe ID (usually your email address) to activate your software. If you don’t have an Adobe ID, you see an option to create one.
Optional (CS5 & earlier): After you activate, also register your Adobe product for faster and easier access to support and upgrades.

WIN 7/32-bit, Acrobat Standard 9, can't save pdf in "libraries" folders

I am running Windows 7/32-bit with Acrobat Standard 9.3.2, the operating system is fully patched and updated.
For some odd reason, when I try to convert an office document (working in Office 2003) via the "convert to PDF" button in the "acrobat PDF" toolbar I can't save the document in my "libraries" folder. This folder of course contains "my documents" and is where I prefer to save most of my PDF files. I click on "libraries" to select the place to save the PDF but all that comes up is "no items match your search."
Alternatively, if I try to print the office document to the Adobe PDF printer I get to the menu where it asks where I want to save the PDF file and again, I cannot access the libraries folder. Other locations work fine, such as the desktop, network folders, accessing the C drive and doing down the tree to "my documents', but not the actual libraries folder. Acrobat almost seems to think it is blank.
I'd appreciate any ideas, as I have several users under me in the same position.

Hi Guys,
I have the solution to your problems and I will go ahead an explain it in detail so that no questions will be raised.
I have struggled to get WINDOWS 7 (32BIT) to run on the Touchsmart 300 PC now for three days (and nights) but I know how you can do it.
The problem lies within the VGA Adapter (Graphics Card) this little buddy has incompatible drivers with the inbuilt functions of the Touchsmart PC in its generic (Windows Preloaded) form. Therefore what you can do is the this.
Step 1: Insert Windows 7 (32Bit) disk and start the setup process and follow it until it hits the problem. (Millisecond of Bluescreen)
Step 2: Once the PC starts booting repeatedly press F8 (I mean it just keep on pressing that button until you can select "Safe Mode")
Step3: Once Windows Setup screen is back it will tell you an error! Which is good. INSTEAD of pressing "OK" (to restart) press SHIFT + F10 (opens the command prompt)
Step4: You should automatically be in \Windows\System32 now enter the following command: CompMgmtLauncher (This is the Device Manager).
(If the default directory is not System32 the navigate to it by entering "cd windows" and "cd system 32" (cd = change directory)
Step5: In the Device Manager (do not worry it will take some time to load) select navigate to "Display Adapters" - "ATI Radeon ..." RIGHT-CLICK on it and choose disable. (To be sure Windows will not have any other troubles you should do the same for all highlighted devices. the once with the yellow triangle)
Step6: Once this is done restart your system and let the install run into the normal mode and finish the install.
Step7: Once Windows starts for the first time. Use the provided ATI Radeon Driver from HP (NOT the original one) from the support download website to install the correct driver.
Step8: Resart and enjoy!
Hope this helps and let me say to AMD/ATI yopu guys really suck at your one product drivers!
Cheers and Out.

Scene Detect Error in HDV

I am using sony HC9 HDV and Premiere CS3.
when I capture the tape in HDV, the funtion of Scene Detect can not be used.
it can only be used in down convert mode.
i have tried 2 computers and 3 different capture cards.
is there anyone facing the same problem?
can anyone help me please?
thor.

Alas no scene detection in Premiere, use HDVSplit.
http://strony.aster.pl/paviko/hdvsplit.htm

Once more: hdv -- scene detection

Hello,
what is the reason that premiere cs4 is not be able to detect scenes in HDV material?
Why "we" have to use HDVSplit?
Carlos

Ask Adobe. They are always last to introduce such basic functionality that is readily available in freeware/shareware for ages. Look at DV. Scenalyzer offered scene detection for more than two years before Adobe finally caught up and still does not compare favourably to Scenalyzer that offers a lot more. Adobe probably needs to progress to CS7, meanwhile stealing our $$ for each and every upgrade and still not delivering on time.
IMO there is nothing wrong with HDVSplit. It works reliably and does what we expect it to do. If you don't like this answer, contact Adobe, maybe they can get their stuff together before 2015. (ETA CS5: 2011, CS6: 2013, CS7:2015)

Flash to premiere cs3 then export to HD

Hi
What i need to do is Create a Flash swf, then import to premiere through third part plugin (flash ants, is this good?), then add some audio, then burn it to DVD.
The issue is getting the a good quality video from the export from premiere. i have tried to export as HD 1080i 25 high quality but when i play back the output its all jittery is this due to my machine, i have a pretty grunty one though.
Eventually i would like to create a dvd but it looks like you cant have HD when using Encore so how do i retain the quality?
Also what size should i make my document in Flash. i have tried 720x480 but this proved to be insufficient. i tried doubling that and then shrinking in premiere which seemed to work quite well when exported ad HD (thou jittery).
The reason i want to do this is because we have an expo coming up and i want to create a profile for business i work in. This profile will be displayed on a 40inch HD LCD and run from a DVD where the dvd will have to loop.
The only programs i have are adobe create suite CS3 so we will have to work within these limitations.
If anyone can help it would be much appreciated
Thanks
M
Specs
Intel core duo 2.2Ghz
2Gb ram
80GB hard drive
Windows XP
Adobe premiere CS3 With all updates as of last week and Flash Ants third party plugin
Adobe Flash CS3
Adobe Captivate 3
Flash Player 10

The reason i want to do this is because we have an expo coming up and i want to create a profile for business i work in. This profile will be displayed on a 40inch HD LCD and run from a DVD where the dvd will have to loop.
My best advice is to create the whole thing in Flash and run it from a Laptop. Just skip the whole 'video' idea on this one. It'll ruin your whole day.

Automatic Scene detection

Hi,
I just purchased a Powerbook and I am a new Apple user (converted from PC). I used to use a Pinnacle program but now I am very excited to try the iMovieHD which comes with the laptop.
Unfortunately, when I tried to create my first movie, I have a problem already with importing my images. My images won't split into clips. The program only shows everything as 1 long clip. I checked my preferences to make sure that the automatic scene detection feature is on. I didn't set the time and date of my camcorder.
My question is: (1) Is setting the date and time of my camcorder really criticial when you import the images? (2) eventhough the date and time is not set, i have several scenes which were shots at different time, but iMovie still didn't pick it up as a new clip, eventhough there was a good 5 seconds of nothing in the tape. How can that be? (3) if setting date and time the only way to do an automatic scene detection, what will be my next option to create several clips. Is there a way to do it manually (please...I hope this is not the answer).
Any tips are greatly appreciated. I already convinced my husband to convert from PC to MAC, hoping that for media stuff MAC is better and friendlier than PC. Please, show me that this is true.
Thanks in advance,
Amanda

Amanda
Here is a link to an Apple Article about automatic scene detection:
http://docs.info.apple.com/article.html?artnum=61412
My clock was not set, but as soon as I turn the "internal clock" on, it shows the correct time and date right away.
I'm a bit confused now! If the clock is showing the correct date and time then it must be set and shouldn't be causing a problem with scene detection. With my camera (see details below), when I switch to record (standby) mode and select the menu item Clock Set, it shows the date and time, but there is no switch to turn the clock off or on.
It might be worth doing a short test recording with, say, 3 or 4 short scenes with a break of about 10 seconds or so between each scene. Import that to iMovie and see if the scenes are automatically detected (make sure the preference is checked first). If not, it might be worth deleting (trashing) iMovie's preference file - it's in your User (Home) folder under Library/Preferences and named com.apple.iMovie.plist. A new default preference file will be created by iMovie next time it is opened - you may then need to change some settings to your own preference, as required. Note that preference files in OS X can sometimes become corrupted - trashing them can often fix minor issues.
John

Import Premiere CS3 Project into AE

New to the Mac CS3 universe. Imported a Premiere CS3 project into AE.
Brought it in and AE made a comp from the sequence and sources from all
the media. Thought everything was fine till I scrubbed the timeline and
discovered that the Title items I had placed on my Premiere timeline
appeared to be just alpha channels. The text had not come along with the
footage.
Did I miss a step in Premiere? Used to AE and Vegas on my old Winbox, so
this CS3 integration is a nice change, but occasionally get trip ups
such as this on the learning curve.
Mac Pro Quad
CS3 Creative Suite

Ok thanks, that helps me quite a bit. The footage is all numbered sequentially so Im not mixing it up (9x1 hour blocks), but the framerates could be causing the problem. If the imported footage is HD 1440x1080 @ 25fps in Premiere, I have created a new project also set at HDV1080i 25 (50i) and imported the timeline. I then save this and import to AE, but am still getting the same problem. I know that Ive done the process backwards (premiere then AE), but out of curiosity, can you yourself get premiere transitions to work in AE? Cause I might ask adobe for new install discs if you can.
Cheers
David

My scene detect in Premiere cs3 on WIN 7, 64 bit is ghosted and can't turn on

Similar Messages

Maybe you are looking for