My score updated today - OMG UPDATE UPDATE LOOK LOOK!!

Thanks, yes now I will be gardening all three of my cards and pressing the luv button every 3 months

My credit score updated today to Eq(606) TU(527) Exp(577)I started off with the capital one secured card in may CL $401applied for the cap 1 qs one card and got approved with a $500 CLShould i apply for another card or wait and if so which one? or any other advice of what i should do next? MAJOR UPDATE!!!!!:I was going to stop applying after getting approved for cap 1 qs 1 but thanks to the members that told me three cards are actually ideal for rebuilding credit i went back and did some digging to see what else i can apply for and get approved for and not just waste an inquiry. After reading reviews, some more posts on my fico, i decided to apply for the NFCU nRewards card....and....I GOT APPROVED with a limit of $6K!!!! Can you believe that with my scores i stated earlier, its unbelieveable now i am going to nurture these three cards and improve on them until my scores are in the 700s. THANK YOU SO MUCH MYFICO COMMUNITY.

Similar Messages

  • My score updated today - Need Advice....

    My credit score updated today to Eq(606) TU(527) Exp(577)I started off with the capital one secured card in may CL $401applied for the cap 1 qs one card and got approved with a $500 CLShould i apply for another card or wait and if so which one? or any other advice of what i should do next?

    Yep that's why I was encouraging another card. Because I waited between cards 6 months each. I wish I could have applied and received all at the same time for AAOA reasons
    BUT
    If your credit is not good enough I do believe it's better to wait to apply for an unsecured card instead of getting more secured cards. Only because most of the time you tie your money up into cap1 secured card and they never graduate.

  • My score updated today - tried - approved!

    My credit score updated today to Eq(606) TU(527) Exp(577)I started off with the capital one secured card in may CL $401applied for the cap 1 qs one card and got approved with a $500 CLShould i apply for another card or wait and if so which one? or any other advice of what i should do next?

    Yep that's why I was encouraging another card. Because I waited between cards 6 months each. I wish I could have applied and received all at the same time for AAOA reasons
    BUT
    If your credit is not good enough I do believe it's better to wait to apply for an unsecured card instead of getting more secured cards. Only because most of the time you tie your money up into cap1 secured card and they never graduate.

  • Quality scores updation

    Hi Gurus ,
    Can anybody tell me How quality scores updates in system for a material or vendor . As per my knoweledge Scores update only by Usage decision codes . Is any othe thing from which score gets updated .
    Suppose i make defects recording and based upon that i make a notificaton , then the defects wt i have activited in system , by determining that can quality score gets updated .
    For quality scores we mention values in QS51 (selected sets). and we also mention values for Defects class also , my question is score which i maintained in Defects clases wt is effect of these score .
    Thanks in advance .
    Amit

    Please go through this and come back with your question, where are you did the setting, did you do any settings, if so which level, pl let us know
    Define Quality Score Procedure
    In this step, you define the procedures for determining the quality score.
    The quality score procedure is defined in the inspection setup for the material master at plant level. You can define a default value for this procedure in the inspection type.
    Requirements
    The following specification limits have been defined in theSettings at Client Level.
    Highest quality score
    Lowest quality score
    Lower limit for good quality
    If you want to use quality score procedures that access the weighted shares of defects for the characteristics, you must maintain the characteristic weights.
    If you want to use quality score procedures that access the quality score of the characteristics, you must maintain thedefect classes.
    If you want to use quality score procedures, in which the system calculates the share of scrap, you must:
    Check whether procedures for estimating the scap share have been defined inCustomizing
    Assign suitable procedures for estimating the scrap share to the characteristics in the task list
    Identify inspection characteristics as relevant for scrap in theircontrol indicators
    Standard Settings
    A number of commonly used procedures for determining the quality score are implemented in the standard system:
    Quality score from the usage decision
    Quality score from the share of defects in the lot
    Quality score from the shares of defects for the characteristics
    From the maximum share of defects
    From the weighted average share of defects
    Quality score from the quality score of the characteristics
    From the minimum (worst) quality score
    From the weighted average quality score
    The table has the delivery class G. The following name range is reserved for the user
    Quality score procedure 9, A, ... , Z*
    Recommendation
    Use the procedure in the standard system.
    Decide on certain procedures for each inspection type; if possible, do not differentiate according to material groups or plants.
    Activities
    1. Determine which procedures for calculating the quality score should be used. You can make a distinction on the basis of the:
    ---Plant
    ---Inspection type
    2. Modify the table of quality score procedures according to your needs. If the procedures contained in the standard system are not sufficient, you must create additional procedures using function modules.
    3. Define the quality score procedures in the Default Values for the Inspection Type or in the inspection setup for the material.

  • When does the FICO score update?

    How do I get an updated score from myFICO? I used Credit Karma in the past, but I wanted daily score updates, and not weekly.  Someone was using myFICO and said they are able to see daily scores.  My myFICO score updated on my purchase date, the 4th. But I can't seem to find a way to update them.  Credit Karma finally updated mine.  Does myFICO work the same way? Updates the score weekly?   I purchased myFICO to avoid waiting.  One payment increased the score immensly -- I am excited, but now bummed because myFICO doesn't show the updated score.

    Hi,
    > Are the
    computer LastLogonTimestamp attribute and the
    user LastLogonTimestamp attribute always
    > updated at the same time by the same events and conditions?
    No. The lastLogontimeStamp attribute is not updated every time a user or computer logs on to the domain. User logon may update user lastLogontimeStamp attribute, computer logon may logon computer lastLogontimeStamp attribute, there are irrelevant.
    > Possibly everybody else knows that a computer logon event and a user logon event are one in the same
    > thing
    That’s different. For example, computer logon domain to apply computer policy, this action happens before user logon. Also computer password change is related nothing with user.
    The lastLogonTimestamp attribute reflects simple bind operations and NTLM network-based logons. This behavior enables stale account cleanup in Active Directory without affecting LDAP client authentication that uses only simple bind operations.
    For more information please refer to following MS articles:
    List Inactive Computer Accounts in Active Directory
    http://gallery.technet.microsoft.com/scriptcenter/6b8163d1-5fae-43b5-a664-a2d1f6e1e2da
    Dandelions, VCR Clocks, and Last Logon Times: These Are a Few of Our Least Favorite Things
    http://blogs.technet.com/b/heyscriptingguy/archive/2010/01/27/dandelions-vcr-clocks-and-last-logon-times-these-are-a-few-of-our-least-favorite-things.aspx
    Last-Logon-Timestamp attribute
    http://msdn.microsoft.com/en-us/library/windows/desktop/ms676824(v=vs.85).aspx
    Lawrence
    TechNet Community Support

  • How can I use pdf pack to convert cubase documents  (music scores)  into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?

    How can I use pdf pack to convert cubase documents  (music scores)  into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?

    Hi mariab,
    What format are those music scores (I'm not familiar with cubase documents). But, it may be that Adobe PDF Pack doesn't support that format. In that case, Acrobat is the way to go. You can then print your files to PDF as you'd like. You're welcome to try Acrobat for free for 30 days to see whether it's going to work for you. If you decide it is, and you'd like to use it going forward, you could convert your PDF Pack subscription into an Acrobat subscription.
    Best,
    Sara

  • How to synch in the most recent version of iTunes - 11.0.0.163 - The latest version updated today and changed the look of the program. I can't see where to click to synch. If I disconnect and restart it works fine automatically, but why do that?

    I updated the latest version of iTunes today and it has a new look. That's fine but I can't see where to click to synch my ipod after downloading music or podcasts. It was always easy.

    It might make it much easier on you if you enable the sidebar in iTunes. Launch iTunes and go to View>Show Sidebar. With iTunes set up like that, it should look a lot more familiar to you. You can select your device name under the devices heading and then go through all of the iTunes panes by clicking on them at the top of the iTunes Window.
    My screenshot shows my iPad, but it works the same way with an iPod.

  • Using menu to update look and feel

    Hi all,
    I am trying to update the look and feel of my application.
    In the main method I set the look and feel to metal.However, I have created a menu with an option to change the look and feel at runtime. I want the user to be able to just select the required look, e.g. Windows,on the drop down menu and then have the application updated.
    I know that the following does not work:
    void jMenuItem10_actionPerformed(ActionEvent exc) {
    try {
    UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
    this.repaint();
    catch(Exception excs) {
    excs.printStackTrace();
    Am I miles away from the correct solution or am I nearly there? All help gratefully received.
    Regards.

    After UIManager.setLookAndFeel() add this row:
    SwingUtilities.updateComponentTreeUI(this);
    I don't think you need this.repaint();
    Hope this will help you!

  • Update look at table

    Good Morning Everyone,
    We have test1 and test2 environments.
    There are 2 tables name contact and users table in both environments.
    T.Contact
    T.User
    T1.User
    The contact is reference table and have to update user table ID.
    Now, we are doing following steps to update in user ID of T.Contact:
    1) find last name in ID of T.User according to User IDs in T.Contact
    2) find IDs in T1.User for updated ID
    3) change User IDs in T.Contact
    We are wondering whether better ways are exist or not.
    Thanks,
    S!G

    Sea!Gull wrote:
    Thank Mr. Justin Cave,
    We still need assistance,Feel free to post in the other thread.
    It makes no sense to have two threads open at the same time where slightly different sets of people ask the same questions to try to understand your requirements in order to help you. The folks that read and answer in this forum are basically the same set of folks that hang out in the PL/SQL forum. It ends up wasting a bit of your time and a lot of our time because we're just going to repeat what other folks have written.
    As has been pointed out in the other thread, the example SQL statement you posted initially is syntactically incorrect on multiple levels-- we can't figure out what you originally wanted it to do. You haven't posted the table definitions as has been asked. You haven't provided sample data and you haven't explained what your query is supposed to do. So someone in that thread (one of the pains of having multiple duplicate threads is that now I don't know who made the suggestion so I can refer back to it) made an attempt to change the query to do something vaguely reasonable and syntactically correct. What you substitute depends on what you want your query to do.
    Justin

  • My GameCenter scores update briefly and then revert to scores from the past.  This is happening on an iPad 2, an iPad Retina and on an iPod touch 5.  I'm running iOS 6.1.3 on all three.

    for the past week or so my Gamecenter leaderboard scores for several games get posted briefly for about 15-20 minutes, and then revert to older scores.  I've tried signing out and back in to GameCenter, but no chance.  I 've also rebooted, but  that doesn't help.  I usually play on an iPad 2, but also use an Pad 3, or an iPod touch 5.
    The GameCenter is just a useless app if it can't display proper scores. and I 'm way too old to try to restart these games from scratch.
    Thanks for any suggestions.

    I've received a lot of complains from my users recently. Scores are reverted to some old value with no reason. Apple technical support incident didn't work, they say it's not a code level question. Should be something wrong with gamecenter servers data sync. I would appreciate any advise, not sure how to move forward with the issue.

  • Score updating problem

    Hi..everyone
    I developed game in which score increment by 10 per second.It works fine in emulator but in sony when i tried to run, score increment by 1 and as level pass means in third level it increment 1 after few second.....
    any one know reason?

    And you do you propose that we should know the reason?

  • 10.10.1 update looks to be frozen. Advise?

    Its been almost n hour and the progress bar has been stuck at about 15%? Restarting is not recommended correct?

    HI,
    *"Disk utility won't repair the HD (I've tried multiple times). I did get 10.4.2 to install once, but still won't reboot. Tried a disk repair again - still no luck. I've tried reinstalling 10.4.2 again and it doesn't even recognize the HD as an available disk to load the OS on."*
    What type of errors is Disk Utility reporting????
    Are you booting from your install disk when you try to repair the drive using Disk Utility ??
    You can't repair the drive using the Disk Utility app that resides in the Applications folder.
    Try running the Apple Hardware Test
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always *have a minimum of 10% to 15% free disk* space at all times.
    Carolyn
    Message was edited by: Carolyn Samit

  • Help! "Fixed" credit issues and score dropped today!

     For some reason, my score dropped 13 points today. There's 5 alerts on MyFico -- but I just had a $16,000 CO deleted. I can't imagine that would make my score drop. I mistakenly paid all my CCs down to 0 before knowing this wasn't good. My disputes haven't been removed yet. LVNV promised me 3x they would remove from my CR and the alert said it's still there! I called them and they claimed they haven't reported it this month. A couple other old COs are there so I can't think why on earth it would drop 13 pts. I'm in a very tight window for FHA. I'm fine but I can't fall at all and thought my score would bump up a little.a) what can I do quickly to bump up my score just a little?b) what can I do to run a small balance on one of my CCs (because I learned 0 is bad) when it won't update until the end of the month?c) what do you do when these CA say they're going to delete several times (it's almost falling off) and they don't? We are going to underwriting soon, in August, and I'll be so upset if all my efforst resulted in a 13 pt drop. To me, it makes no sense. When a mortgage co pulled a hard inquiry it jumped 11 pts last week! !!? Advice appreciated!

    You might be able to put a small amount on one of your credit cards and call them and as for them to report now, and not wait for the normal cycle. I'm not sure which cards are more likely to do it than others. I know I've read on these boards examples of people doing that. 

  • HT204088 i did not buy anything today and i was looking at my bank account and see a 5.64 dollar charge why do i have this charge?

    why am i being charged for something i did not buy

    Hi alisia,
    You must be aware that just because you see a charge on your account today, it does not mean that the charge was actually done today. If it is an iTunes charge, I can tell you from experience, it often takes several days before they show up....
    GB

  • Last time i bought iwork retail v9.0.3, then i tried to install it but it kept showing the error message. After i updated my mac, the iwork asked for a serial number and until today i can't use any of the iwork application. How can i solve this problem?

    Hoping for a solution since i need to have this iwork to 'work'.. Too many assignments need to be done and i am sick of going to the library to use the desktop there. Thank you =)

    I think you have two separate issues & I'll try to answer in the order you need to address them.
    First, it seems you have/had the trial of iWork '09 installed. It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This has changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
    Next, you need to update iWork '09 to 9.0.5. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work.

Maybe you are looking for