My screen displayed flickering of various colors in line.

I have a macbook air 11" almost a year with it now...and it has given me jst a
couple of problems. First was my screen displaying flickering lines of various colors so I didn't
know what to do..so I jst keep pressing certain buttons to stop it, I had to use the power button..and it
didn't work..until a couple of seconds later it shut down. Next was my sound system. There was this
weird sound of some kind of banging sound..like hitting something. I had to shut down my laptop.
I'm not liking this anymore. I don't know if I should return the product before the year is complete.

Return it as meaning getting a service call, yes.
Contact Apple for appt. for in shop diagnostic and likely repair.
vertical or horizontal lines?  Do the lines move when you move the monitor?
either damaged LCD feed lines or fault of same at connection with logic board or possible defect at logic with GPU

Similar Messages

  • Screen displaying "Negative of usual colors"

    kids were playing on iMac and now the screen displays a negative of usual color palette? Any ideas what is causing this?

    factor14,
    Welcome to Apple Discussions.
    System Preferences...>Universal Access>Seeing>Display (Reset Black on White/Use grayscale/Enhance contrast as necessary)
    ;~)

  • Screen is on a bad LSD trip - flickers grainy psychedelic colors then black

    when i power up my laptop (from off or sleep) the screen drastically flickers grainy psychedelic colors then goes black then flickers back to colors then back to black (etc.etc.) ... each day this process goes on longer than the day before ... am afraid one day it won't come on at all ...
    a friend said it was probably the video ram ... can anyone confirm this?
    a little more than a year ago i had a new LCD installed because it had started getting faint dark spots ... the first time i booted it up there were occasional blips of strange colors but they only lasted a few seconds so was not able to demonstrate to repairperson ...
    help me PLEASE!!!
    titanium powerbook g4 Mac OS X (10.3.9)
    powerbook g4   Mac OS X (10.3.9)  

    Thomas
    thankyou for taking the plunge ...
    i'm sorry, thought i mentioned the screen was developing dark spots hence my reason for having them look at it ...
    However, the main reason i took it in was it had begun to overheat and the VERY LOUD fan would stay on forever and drive me crazy! in 3 years it had never done that and with the warranty about to expire decided to have everything done that i could ...
    the apple repair is 4 hours from me or i would have taken it back immediately but in the beginning the problem was so infrequent they might not have been able to detect it anyway.
    now that you have a better picture, i bet you tell me i should drop kick this baby into the stratosphere, right?
    any idea how much a new logic board will set me back?
    (if you're in So Cal double it and you'll know what it'll cost in england ... i moved over from l.a. 2 years ago and the price of things STILL freaks me out!)
    thankYOU so much
    lori
    powerbook g4 Mac OS X (10.3.9)
    powerbook g4 Mac OS X (10.3.9)
    powerbook g4 Mac OS X (10.3.9)
    powerbook g4 Mac OS X (10.3.9)
    powerbook g4 Mac OS X (10.3.9)
    powerbook g4 Mac OS X (10.3.9)
    powerbook g4 Mac OS X (10.3.9)
    powerbook g4 Mac OS X (10.3.9)
    powerbook g4 Mac OS X (10.3.9)

  • Macbook Air Late 2010 display flickers after installing Yosemite

    Hi !
    I'm from Germany.
    i have upgraded my Macbook Air, Late 2010 from Mountain Lion to Yosemite last Saturday.
    The Installation works fine. At the first Time i have no problems, but:
    One Day later i start my Macbook Air normally. Now the left side of the screen is flickering.
    There are vertical lines to see. The right side of the integrated screen is ok.
    i have resetted the SMC and the Power Management.
    Please help, what can i do ?
    Greetings
    iRoGo

    I noticed a similar issue with my MBA 2012 after installing Yosemite. The screen flickers slightly most of the time now. It's more noticeable with dark backgrounds. It almost 'vibrates' and is very annoying. Reminds me of an old monitor with a low refresh rate. I reset the SMC, PRAM, etc. and contacted Apple, who had me go through the same steps. The flickering is still present when booted into Recovery Mode. When I boot into Safe Mode the issue gets dramatically worse and I see screen artifacts like iRoGo describes -- parts of the screen blanking out, whole screen/parts of the screen flickering on and off, lines appearing, etc. It's basically unusable in Safe Mode.
    At this point the issue seems to be hardware-related (i.e. issue persists in even in Recovery Mode), but I'm suspicious seeing that it manifested right after installing Yosemite. I will be bringing my MBA to Apple for service later this week...

  • S10-3: colored dots line at start up

    Hi,
    I have observed that whenever I start my netbook, just before the desktop appears (the last `black screen`) I get an interrupted colored thin line at the top of the screen (blue, yellow and white dots).
    Is this a sign that I have some problems with the video card or the display? Is it normal? 
    Can anyone help?
    Thanks.

    No harm, indeed, the netbook works just fine, but I was just wondering whether it is not an indication of a minor problem with the graphics media accelerator or the display, or something else from this area ...
    Also, I have noticed that when turned on from Sleep mode, the netbook shows no line. It only happens when I close it with shut down...

  • Screen displaying inverted colors

    Ever since I updated to 1.0.2, the iPod Nano refuses to display my stuff correctly. Sometimes, it will display everything in inverted colors, with a little sliver on the left being correctly colored.
    Then, it will switch back to normal, and flash a white bar on the right side of the screen. It will stay like this until the screen cuts off, then it will go back to the inverted colors.
    I don't know what this is, but if it's from the update, they'd better release a new one soon. I'm tired of having my iPod glitchy.

    Have you tried resetting the iPod?
    Make sure the hold switch is not locked first (i.e. you can operate the iPod buttons)
    The press and hold the Menu and Centre Button down at the same time, keep them both pressed until the Apple Logo appears on the screen, then release.
    Ian

  • Mac Pro display flickers with a white screen and then display closes

    Hi,
    The display on my Mac Pro started showing a white screen and flickering.
    So I tried formating and re-installing 10.4.10. I am able to complete the installation of first DVD without flickering. But when after the restart after installation using first DVD then the flickering resumes.
    Any idea what is the issue and how we can solve this issue.
    The AHT test shows this code 4 SNS/1/40000001:ICAC. According to
    http://support.apple.com/kb/TS2081?viewlocale=en_US the code should have a trailing number - but my report does not have any number. Is this error code fine? If no, can some one tell me what is the error in the system?
    Thanks,
    Ed
    Message was edited by: esg123

    Same symptoms here. We tried AHT on a good Mac Pro with the video card from the bad mac, and got the 4 SNS/1/40000001:ICAC error. Looks like a bad video card.
    Here's another thread discussing the problem: http://discussions.info.apple.com/thread.jspa?threadID=2071334
    Dave

  • IPad mini with retina display flickering screen

    I just received my brand new iPad mini with retina display yesterday and today the screen started flickering and would not stop. I've powered it off and did a hard reset..the flickering will not go away. I even completely erased everything off the iPad and reset it using the settings menu. The flickering is still showing on the opening hello screen. Any ideas why this is happening?

    I'm having a similar problem as "nickyizdal" and went through the same scenario, as far as erasing everything. Unfortunately, I have gotten this ipad mini a few months now...not sure if updating it to IOS 8.1.3 had anything to do with it, but this issue happened a few days after that update.
    Any help would be appreciated. Thx.

  • My Macbook Pro with Retina display screen keeps flickering a ghost screen.

    My Macbook is a year and a half old, and has never been dropped or damaged.  A few months ago, the screen started flickering.  Not like off and on, but a ghost screen would flicker on top of what I was doing.  It is usually the same window that I have present, but just like half of it for a millisecond.  It is very annoying and is unpredictable.  It usually happens for hours every few seconds.  What should I do to fix this?  I try to take a screen shot to post but it either happens too fast or is not possible to record. 

    Hi dulceprincesa,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801#
    Cheers,
    - Judy

  • External Display Flickers (Intel on board)

    Hi,
    I have recently made a fresh installation of Arch Linux and trying to setup it for my work environment. I made a basic installation of xfce4 with slim login manager. I wanted to hook my laptop with an external display. I used xrandr to extend my laptop display with the external display. Everything worked fine but my external display flickers insanely bad. I cannot stare at it for > 30s. I dual boot on windows, so I tested the same setup with windows and it worked just fine, out of the box. I even used one of my friend's laptop who's running ubuntu and has the same h/w. It worked out of the box. I have spent more than 8 hours trying to find out where the issue would be and miserably failed. Below are certain logs and output that might help traingulate my issue.
    Its a Dell Inspiron N4030, with Intel onboard graphics. I have the xf86-video-intel driver installed and the display works perfectly fine with laptops default display.
    Output of xrandr -q
    [joker@lucifer ~]$ xrandr -q
    Screen 0: minimum 320 x 200, current 2732 x 768, maximum 8192 x 8192
    LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
    1366x768 60.0*+
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 connected 1366x768+1366+0 (normal left inverted right x axis y axis) 344mm x 194mm
    1366x768 60.0*+
    1024x768 75.1 72.0 70.1 60.0
    832x624 74.6
    800x600 72.2 75.0 60.3 56.2
    640x480 72.8 75.0 66.7 60.0
    720x400 70.1
    /var/log/Xorg.0.log
    [ 42.854]
    X.Org X Server 1.11.2
    Release Date: 2011-11-04
    [ 42.854] X Protocol Version 11, Revision 0
    [ 42.854] Build Operating System: Linux 3.1.0-3-ARCH x86_64
    [ 42.854] Current Operating System: Linux lucifer 3.1.0-4-ARCH #1 SMP PREEMPT Mon Nov 7 22:47:18 CET 2011 x86_64
    [ 42.854] Kernel command line: root=/dev/sda5 ro
    [ 42.854] Build Date: 07 November 2011 07:53:00AM
    [ 42.854]
    [ 42.854] Current version of pixman: 0.24.0
    [ 42.854] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 42.854] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 42.855] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 10 17:07:34 2011
    [ 42.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 42.927] (==) ServerLayout "DualSreen"
    [ 42.927] (**) |-->Screen "Screen0" (0)
    [ 42.927] (**) | |-->Monitor "Monitor0"
    [ 42.945] (**) | |-->Device "Device0"
    [ 42.945] (**) |-->Screen "Screen1" (1)
    [ 42.945] (**) | |-->Monitor "Monitor1"
    [ 42.945] (**) | |-->Device "Device1"
    [ 42.945] (**) Option "Xinerama" "1"
    [ 42.945] (==) Automatically adding devices
    [ 42.945] (==) Automatically enabling devices
    [ 42.945] (**) Xinerama: enabled
    [ 43.004] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 43.004] Entry deleted from font path.
    [ 43.004] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 43.004] Entry deleted from font path.
    [ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 43.005] Entry deleted from font path.
    [ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 43.005] Entry deleted from font path.
    [ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 43.005] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 43.005] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 43.005] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 43.005] (II) Loader magic: 0x7ccae0
    [ 43.005] (II) Module ABI versions:
    [ 43.005] X.Org ANSI C Emulation: 0.4
    [ 43.005] X.Org Video Driver: 11.0
    [ 43.005] X.Org XInput driver : 13.0
    [ 43.005] X.Org Server Extension : 6.0
    [ 43.006] (--) PCI:*(0:0:2:0) 8086:0046:1028:0466 rev 2, Mem @ 0xfac00000/4194304, 0xc0000000/268435456, I/O @ 0x0000f080/8
    [ 43.006] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 43.006] (II) LoadModule: "extmod"
    [ 43.027] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 43.043] (II) Module extmod: vendor="X.Org Foundation"
    [ 43.043] compiled for 1.11.2, module version = 1.0.0
    [ 43.043] Module class: X.Org Server Extension
    [ 43.043] ABI class: X.Org Server Extension, version 6.0
    [ 43.043] (II) Loading extension MIT-SCREEN-SAVER
    [ 43.043] (II) Loading extension XFree86-VidModeExtension
    [ 43.043] (II) Loading extension XFree86-DGA
    [ 43.043] (II) Loading extension DPMS
    [ 43.043] (II) Loading extension XVideo
    [ 43.043] (II) Loading extension XVideo-MotionCompensation
    [ 43.043] (II) Loading extension X-Resource
    [ 43.044] (II) LoadModule: "dbe"
    [ 43.044] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 43.045] (II) Module dbe: vendor="X.Org Foundation"
    [ 43.045] compiled for 1.11.2, module version = 1.0.0
    [ 43.045] Module class: X.Org Server Extension
    [ 43.045] ABI class: X.Org Server Extension, version 6.0
    [ 43.045] (II) Loading extension DOUBLE-BUFFER
    [ 43.045] (II) LoadModule: "glx"
    [ 43.045] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 43.060] (II) Module glx: vendor="X.Org Foundation"
    [ 43.060] compiled for 1.11.2, module version = 1.0.0
    [ 43.060] ABI class: X.Org Server Extension, version 6.0
    [ 43.060] (==) AIGLX enabled
    [ 43.060] (II) Loading extension GLX
    [ 43.060] (II) LoadModule: "record"
    [ 43.060] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 43.061] (II) Module record: vendor="X.Org Foundation"
    [ 43.061] compiled for 1.11.2, module version = 1.13.0
    [ 43.061] Module class: X.Org Server Extension
    [ 43.061] ABI class: X.Org Server Extension, version 6.0
    [ 43.061] (II) Loading extension RECORD
    [ 43.061] (II) LoadModule: "dri"
    [ 43.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 43.063] (II) Module dri: vendor="X.Org Foundation"
    [ 43.063] compiled for 1.11.2, module version = 1.0.0
    [ 43.063] ABI class: X.Org Server Extension, version 6.0
    [ 43.063] (II) Loading extension XFree86-DRI
    [ 43.063] (II) LoadModule: "dri2"
    [ 43.063] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 43.064] (II) Module dri2: vendor="X.Org Foundation"
    [ 43.064] compiled for 1.11.2, module version = 1.2.0
    [ 43.064] ABI class: X.Org Server Extension, version 6.0
    [ 43.064] (II) Loading extension DRI2
    [ 43.064] (II) LoadModule: "intel"
    [ 43.091] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 43.114] (II) Module intel: vendor="X.Org Foundation"
    [ 43.114] compiled for 1.10.99.902, module version = 2.16.0
    [ 43.114] Module class: X.Org Video Driver
    [ 43.114] ABI class: X.Org Video Driver, version 11.0
    [ 43.114] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    [ 43.114] (++) using VT number 7
    [ 43.134] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 43.135] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 43.135] Requested Entity already in use!
    [ 43.135] (EE) Screen 1 deleted because of no matching config section.
    [ 43.135] (II) UnloadModule: "intel"
    [ 43.136] (II) Unloading intel
    [ 43.136] drmOpenDevice: node name is /dev/dri/card0
    [ 43.136] drmOpenDevice: open result is 8, (OK)
    [ 43.136] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 43.136] drmOpenDevice: node name is /dev/dri/card0
    [ 43.136] drmOpenDevice: open result is 8, (OK)
    [ 43.136] drmOpenByBusid: drmOpenMinor returns 8
    [ 43.136] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 43.136] (**) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 43.136] (==) intel(0): RGB weight 888
    [ 43.136] (==) intel(0): Default visual is TrueColor
    [ 43.136] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
    [ 43.136] (--) intel(0): Chipset: "Arrandale"
    [ 43.136] (**) intel(0): Relaxed fencing enabled
    [ 43.136] (**) intel(0): Wait on SwapBuffers? enabled
    [ 43.136] (**) intel(0): Triple buffering? enabled
    [ 43.136] (**) intel(0): Framebuffer tiled
    [ 43.136] (**) intel(0): Pixmaps tiled
    [ 43.136] (**) intel(0): 3D buffers tiled
    [ 43.136] (**) intel(0): SwapBuffers wait enabled
    [ 43.136] (==) intel(0): video overlay key set to 0x101fe
    [ 43.136] (II) intel(0): Output LVDS1 using monitor section Monitor0
    [ 43.136] (**) intel(0): Option "Enable" "true"
    [ 43.136] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 43.196] (II) intel(0): Output VGA1 has no monitor section
    [ 43.196] (II) intel(0): EDID for output LVDS1
    [ 43.196] (II) intel(0): Manufacturer: BOE Model: 58e Serial#: 0
    [ 43.196] (II) intel(0): Year: 2010 Week: 1
    [ 43.196] (II) intel(0): EDID Version: 1.4
    [ 43.196] (II) intel(0): Digital Display Input
    [ 43.196] (II) intel(0): Undefined color depth
    [ 43.196] (II) intel(0): Digital interface is undefined
    [ 43.196] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
    [ 43.196] (II) intel(0): Gamma: 2.20
    [ 43.196] (II) intel(0): No DPMS capabilities specified
    [ 43.196] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 43.196] (II) intel(0): First detailed timing is preferred mode
    [ 43.196] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 43.196] (II) intel(0): redX: 0.574 redY: 0.335 greenX: 0.335 greenY: 0.585
    [ 43.196] (II) intel(0): blueX: 0.154 blueY: 0.119 whiteX: 0.312 whiteY: 0.328
    [ 43.196] (II) intel(0): Manufacturer's mask: 0
    [ 43.196] (II) intel(0): Supported detailed timing:
    [ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
    [ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
    [ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
    [ 43.196] (II) intel(0): Supported detailed timing:
    [ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
    [ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
    [ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
    [ 43.196] (II) intel(0): KFDV9HT14101
    [ 43.196] (II) intel(0): Unknown vendor-specific block 0
    [ 43.196] (II) intel(0): EDID (in hex):
    [ 43.196] (II) intel(0): 00ffffffffffff0009e58e0500000000
    [ 43.196] (II) intel(0): 01140104801f11780a3fa09355559527
    [ 43.196] (II) intel(0): 1e505400000001010101010101010101
    [ 43.196] (II) intel(0): 010101010101411c56a0500016303020
    [ 43.196] (II) intel(0): 360035ad1000001a411c56a050001630
    [ 43.196] (II) intel(0): 3020360035ad1000001a000000fe004b
    [ 43.196] (II) intel(0): 46445639814854313431303100000000
    [ 43.196] (II) intel(0): 00004101940100000001010a20200000
    [ 43.196] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 43.196] (II) intel(0): Printing DDC gathered Modelines:
    [ 43.196] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 43.196] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Printing probed modes for output LVDS1
    [ 43.196] (II) intel(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 43.196] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 43.196] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 43.196] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 43.196] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 43.255] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 43.255] (II) intel(0): EDID for output VGA1
    [ 43.255] (II) intel(0): Manufacturer: PHL Model: c02d Serial#: 9740
    [ 43.255] (II) intel(0): Year: 2009 Week: 35
    [ 43.255] (II) intel(0): EDID Version: 1.3
    [ 43.255] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 43.255] (II) intel(0): Sync: Separate
    [ 43.255] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 43.255] (II) intel(0): Gamma: 2.20
    [ 43.255] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
    [ 43.255] (II) intel(0): First detailed timing is preferred mode
    [ 43.255] (II) intel(0): redX: 0.635 redY: 0.335 greenX: 0.281 greenY: 0.597
    [ 43.255] (II) intel(0): blueX: 0.153 blueY: 0.085 whiteX: 0.312 whiteY: 0.328
    [ 43.255] (II) intel(0): Supported established timings:
    [ 43.255] (II) intel(0): 720x400@70Hz
    [ 43.255] (II) intel(0): 640x480@60Hz
    [ 43.255] (II) intel(0): 640x480@67Hz
    [ 43.255] (II) intel(0): 640x480@72Hz
    [ 43.255] (II) intel(0): 640x480@75Hz
    [ 43.255] (II) intel(0): 800x600@56Hz
    [ 43.255] (II) intel(0): 800x600@60Hz
    [ 43.255] (II) intel(0): 800x600@72Hz
    [ 43.255] (II) intel(0): 800x600@75Hz
    [ 43.255] (II) intel(0): 832x624@75Hz
    [ 43.255] (II) intel(0): 1024x768@60Hz
    [ 43.255] (II) intel(0): 1024x768@70Hz
    [ 43.255] (II) intel(0): 1024x768@75Hz
    [ 43.255] (II) intel(0): Manufacturer's mask: 0
    [ 43.255] (II) intel(0): Supported standard timings:
    [ 43.255] (II) intel(0): #0: hsize: 640 vsize 400 refresh: 70 vid: 2609
    [ 43.255] (II) intel(0): #1: hsize: 1024 vsize 768 refresh: 72 vid: 19553
    [ 43.255] (II) intel(0): Supported detailed timing:
    [ 43.255] (II) intel(0): clock: 85.8 MHz Image Size: 344 x 194 mm
    [ 43.255] (II) intel(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
    [ 43.255] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
    [ 43.255] (II) intel(0): Serial No: AU50935009740
    [ 43.255] (II) intel(0): Monitor name: Philips 160E
    [ 43.255] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 60 kHz, PixClock max 86 MHz
    [ 43.255] (II) intel(0): EDID (in hex):
    [ 43.255] (II) intel(0): 00ffffffffffff00410c2dc00c260000
    [ 43.255] (II) intel(0): 23130103682213782ab370a255489827
    [ 43.255] (II) intel(0): 155054bfee00310a614c010101010101
    [ 43.255] (II) intel(0): 0101010101017f2156aa51001e30468f
    [ 43.255] (II) intel(0): 330058c21000001e000000ff00415535
    [ 43.255] (II) intel(0): 30393335303039373430000000fc0050
    [ 43.255] (II) intel(0): 68696c69707320313630450a000000fd
    [ 43.255] (II) intel(0): 00384c1e3c08000a20202020202000c0
    [ 43.255] (II) intel(0): Printing probed modes for output VGA1
    [ 43.255] (II) intel(0): Modeline "1366x768"x60.0 85.75 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.9 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x72.0 78.44 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 43.255] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 43.255] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 43.255] (II) intel(0): Output LVDS1 enabled by config file
    [ 43.255] (II) intel(0): Output VGA1 connected
    [ 43.255] (II) intel(0): Using exact sizes for initial modes
    [ 43.255] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 43.255] (II) intel(0): Output VGA1 using initial mode 1366x768
    [ 43.255] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 43.255] (II) intel(0): Kernel page flipping support detected, enabling
    [ 43.255] (**) intel(0): Display dimensions: (310, 170) mm
    [ 43.255] (**) intel(0): DPI set to (111, 114)
    [ 43.255] (II) Loading sub module "fb"
    [ 43.255] (II) LoadModule: "fb"
    [ 43.255] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 43.277] (II) Module fb: vendor="X.Org Foundation"
    [ 43.277] compiled for 1.11.2, module version = 1.0.0
    [ 43.277] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 43.277] (II) Loading sub module "dri2"
    [ 43.277] (II) LoadModule: "dri2"
    [ 43.277] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 43.277] (II) Module dri2: vendor="X.Org Foundation"
    [ 43.277] compiled for 1.11.2, module version = 1.2.0
    [ 43.277] ABI class: X.Org Server Extension, version 6.0
    [ 43.277] (==) Depth 24 pixmap format is 32 bpp
    [ 43.277] (II) intel(0): [DRI2] Setup complete
    [ 43.277] (II) intel(0): [DRI2] DRI driver: i965
    [ 43.277] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
    [ 43.339] (II) UXA(0): Driver registered support for the following operations:
    [ 43.339] (II) solid
    [ 43.339] (II) copy
    [ 43.339] (II) composite (RENDER acceleration)
    [ 43.339] (II) put_image
    [ 43.339] (II) get_image
    [ 43.339] (==) intel(0): Backing store disabled
    [ 43.339] (==) intel(0): Silken mouse enabled
    [ 43.339] (II) intel(0): Initializing HW Cursor
    [ 43.456] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 43.466] (==) intel(0): DPMS enabled
    [ 43.466] (==) intel(0): Intel XvMC decoder enabled
    [ 43.466] (II) intel(0): Set up textured video
    [ 43.466] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 43.466] (II) intel(0): direct rendering: DRI2 Enabled
    [ 43.466] (WW) intel(0): Option "Enable" is not used
    [ 43.466] (WW) intel(0): Option "TwinView" is not used
    [ 43.466] (==) intel(0): hotplug detection: "enabled"
    [ 43.466] (--) RandR disabled
    [ 43.466] (II) Initializing built-in extension Generic Event Extension
    [ 43.466] (II) Initializing built-in extension SHAPE
    [ 43.466] (II) Initializing built-in extension MIT-SHM
    [ 43.466] (II) Initializing built-in extension XInputExtension
    [ 43.466] (II) Initializing built-in extension XTEST
    [ 43.466] (II) Initializing built-in extension BIG-REQUESTS
    [ 43.466] (II) Initializing built-in extension SYNC
    [ 43.466] (II) Initializing built-in extension XKEYBOARD
    [ 43.466] (II) Initializing built-in extension XC-MISC
    [ 43.466] (II) Initializing built-in extension SECURITY
    [ 43.466] (II) Initializing built-in extension XINERAMA
    [ 43.466] (II) Initializing built-in extension XFIXES
    [ 43.466] (II) Initializing built-in extension RENDER
    [ 43.466] (II) Initializing built-in extension RANDR
    [ 43.466] (II) Initializing built-in extension COMPOSITE
    [ 43.466] (II) Initializing built-in extension DAMAGE
    [ 43.605] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 43.605] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 43.605] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 43.605] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 43.605] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 43.605] (II) AIGLX: Loaded and initialized i965
    [ 43.605] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 43.605] (II) intel(0): Setting screen physical size to 361 x 203
    [ 43.909] (II) config/udev: Adding input device Power Button (/dev/input/event7)
    [ 43.910] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 43.910] (II) LoadModule: "evdev"
    [ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.910] (II) Module evdev: vendor="X.Org Foundation"
    [ 43.910] compiled for 1.10.99.902, module version = 2.6.0
    [ 43.910] Module class: X.Org XInput Driver
    [ 43.910] ABI class: X.Org XInput driver, version 13.0
    [ 43.910] (II) Using input driver 'evdev' for 'Power Button'
    [ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.911] (**) Power Button: always reports core events
    [ 43.911] (**) Power Button: Device: "/dev/input/event7"
    [ 43.911] (--) Power Button: Found keys
    [ 43.911] (II) Power Button: Configuring as keyboard
    [ 43.911] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
    [ 43.911] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 43.911] (**) Option "xkb_rules" "evdev"
    [ 43.911] (**) Option "xkb_model" "evdev"
    [ 43.911] (**) Option "xkb_layout" "us"
    [ 43.931] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
    [ 43.931] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 43.931] (II) Using input driver 'evdev' for 'Video Bus'
    [ 43.931] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.931] (**) Video Bus: always reports core events
    [ 43.931] (**) Video Bus: Device: "/dev/input/event15"
    [ 43.931] (--) Video Bus: Found keys
    [ 43.931] (II) Video Bus: Configuring as keyboard
    [ 43.931] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15"
    [ 43.931] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 43.931] (**) Option "xkb_rules" "evdev"
    [ 43.931] (**) Option "xkb_model" "evdev"
    [ 43.931] (**) Option "xkb_layout" "us"
    [ 43.932] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 43.932] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 43.932] (II) Using input driver 'evdev' for 'Power Button'
    [ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.932] (**) Power Button: always reports core events
    [ 43.932] (**) Power Button: Device: "/dev/input/event4"
    [ 43.932] (--) Power Button: Found keys
    [ 43.932] (II) Power Button: Configuring as keyboard
    [ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 43.932] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 43.932] (**) Option "xkb_rules" "evdev"
    [ 43.932] (**) Option "xkb_model" "evdev"
    [ 43.932] (**) Option "xkb_layout" "us"
    [ 43.932] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
    [ 43.932] (II) No input driver/identifier specified (ignoring)
    [ 43.932] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
    [ 43.932] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 43.932] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.932] (**) Sleep Button: always reports core events
    [ 43.932] (**) Sleep Button: Device: "/dev/input/event6"
    [ 43.932] (--) Sleep Button: Found keys
    [ 43.932] (II) Sleep Button: Configuring as keyboard
    [ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6"
    [ 43.932] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 43.933] (**) Option "xkb_rules" "evdev"
    [ 43.933] (**) Option "xkb_model" "evdev"
    [ 43.933] (**) Option "xkb_layout" "us"
    [ 43.933] (II) config/udev: Adding input device HID 413c:8161 (/dev/input/event2)
    [ 43.933] (**) HID 413c:8161: Applying InputClass "evdev keyboard catchall"
    [ 43.933] (II) Using input driver 'evdev' for 'HID 413c:8161'
    [ 43.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.933] (**) HID 413c:8161: always reports core events
    [ 43.933] (**) HID 413c:8161: Device: "/dev/input/event2"
    [ 43.933] (--) HID 413c:8161: Found keys
    [ 43.933] (II) HID 413c:8161: Configuring as keyboard
    [ 43.933] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input2/event2"
    [ 43.933] (II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD, id 10)
    [ 43.933] (**) Option "xkb_rules" "evdev"
    [ 43.933] (**) Option "xkb_model" "evdev"
    [ 43.933] (**) Option "xkb_layout" "us"
    [ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/event3)
    [ 43.934] (**) HID 413c:8162: Applying InputClass "evdev pointer catchall"
    [ 43.934] (II) Using input driver 'evdev' for 'HID 413c:8162'
    [ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.934] (**) HID 413c:8162: always reports core events
    [ 43.934] (**) HID 413c:8162: Device: "/dev/input/event3"
    [ 43.934] (--) HID 413c:8162: Found 3 mouse buttons
    [ 43.934] (--) HID 413c:8162: Found relative axes
    [ 43.934] (--) HID 413c:8162: Found x and y relative axes
    [ 43.934] (II) HID 413c:8162: Configuring as mouse
    [ 43.934] (**) HID 413c:8162: YAxisMapping: buttons 4 and 5
    [ 43.934] (**) HID 413c:8162: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input3/event3"
    [ 43.934] (II) XINPUT: Adding extended input device "HID 413c:8162" (type: MOUSE, id 11)
    [ 43.934] (II) HID 413c:8162: initialized for relative axes.
    [ 43.934] (**) HID 413c:8162: (accel) keeping acceleration scheme 1
    [ 43.934] (**) HID 413c:8162: (accel) acceleration profile 0
    [ 43.934] (**) HID 413c:8162: (accel) acceleration factor: 2.000
    [ 43.934] (**) HID 413c:8162: (accel) acceleration threshold: 4
    [ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/mouse1)
    [ 43.934] (II) No input driver/identifier specified (ignoring)
    [ 43.934] (II) config/udev: Adding input device Laptop_Integrated_Webcam_0.3M (/dev/input/event10)
    [ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Applying InputClass "evdev keyboard catchall"
    [ 43.934] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_0.3M'
    [ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.934] (**) Laptop_Integrated_Webcam_0.3M: always reports core events
    [ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Device: "/dev/input/event10"
    [ 43.934] (--) Laptop_Integrated_Webcam_0.3M: Found keys
    [ 43.934] (II) Laptop_Integrated_Webcam_0.3M: Configuring as keyboard
    [ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
    [ 43.934] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_0.3M" (type: KEYBOARD, id 12)
    [ 43.934] (**) Option "xkb_rules" "evdev"
    [ 43.934] (**) Option "xkb_model" "evdev"
    [ 43.934] (**) Option "xkb_layout" "us"
    [ 43.935] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
    [ 43.935] (II) No input driver/identifier specified (ignoring)
    [ 43.935] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event12)
    [ 43.935] (II) No input driver/identifier specified (ignoring)
    [ 43.935] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event13)
    [ 43.935] (II) No input driver/identifier specified (ignoring)
    [ 43.935] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
    [ 43.935] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
    [ 43.935] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
    [ 43.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.936] (**) USB OPTICAL MOUSE: always reports core events
    [ 43.936] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
    [ 43.936] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
    [ 43.936] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
    [ 43.936] (--) USB OPTICAL MOUSE: Found relative axes
    [ 43.936] (--) USB OPTICAL MOUSE: Found x and y relative axes
    [ 43.936] (II) USB OPTICAL MOUSE: Configuring as mouse
    [ 43.936] (II) USB OPTICAL MOUSE: Adding scrollwheel support
    [ 43.936] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
    [ 43.936] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 43.936] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1/event1"
    [ 43.936] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
    [ 43.936] (II) USB OPTICAL MOUSE: initialized for relative axes.
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
    [ 43.936] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
    [ 43.936] (II) No input driver/identifier specified (ignoring)
    [ 43.936] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 43.936] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 43.936] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 43.936] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.936] (**) AT Translated Set 2 keyboard: always reports core events
    [ 43.936] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 43.936] (--) AT Translated Set 2 keyboard: Found keys
    [ 43.936] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 43.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 43.936] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 43.936] (**) Option "xkb_rules" "evdev"
    [ 43.936] (**) Option "xkb_model" "evdev"
    [ 43.936] (**) Option "xkb_layout" "us"
    [ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event14)
    [ 43.937] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 43.937] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 43.937] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.937] (**) PS/2 Generic Mouse: always reports core events
    [ 43.937] (**) PS/2 Generic Mouse: Device: "/dev/input/event14"
    [ 43.937] (--) PS/2 Generic Mouse: Found 3 mouse buttons
    [ 43.937] (--) PS/2 Generic Mouse: Found relative axes
    [ 43.937] (--) PS/2 Generic Mouse: Found x and y relative axes
    [ 43.937] (II) PS/2 Generic Mouse: Configuring as mouse
    [ 43.937] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 43.937] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 43.937] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
    [ 43.937] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
    [ 43.937] (II) PS/2 Generic Mouse: initialized for relative axes.
    [ 43.937] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse2)
    [ 43.937] (II) No input driver/identifier specified (ignoring)
    [ 43.937] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 43.937] (II) No input driver/identifier specified (ignoring)
    [ 43.938] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
    [ 43.938] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 43.938] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 43.938] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.938] (**) Dell WMI hotkeys: always reports core events
    [ 43.938] (**) Dell WMI hotkeys: Device: "/dev/input/event9"
    [ 43.938] (--) Dell WMI hotkeys: Found keys
    [ 43.938] (II) Dell WMI hotkeys: Configuring as keyboard
    [ 43.938] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 43.938] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
    [ 43.938] (**) Option "xkb_rules" "evdev"
    [ 43.938] (**) Option "xkb_model" "evdev"
    [ 43.938] (**) Option "xkb_layout" "us"
    [ 48.392] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 48.392] (II) intel(0): Printing DDC gathered Modelines:
    [ 48.392] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 48.456] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 48.457] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 48.457] (II) intel(0): Printing DDC gathered Modelines:
    [ 48.457] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 48.517] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 49.976] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 49.976] (II) intel(0): Printing DDC gathered Modelines:
    [ 49.976] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 50.035] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 213.440] (II) config/udev: removing device USB OPTICAL MOUSE
    [ 213.440] (II) USB OPTICAL MOUSE: Close
    [ 213.440] (II) UnloadModule: "evdev"
    [ 213.440] (II) Unloading evdev
    [ 213.728] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
    [ 213.728] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
    [ 213.728] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
    [ 213.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 213.728] (**) USB OPTICAL MOUSE: always reports core events
    [ 213.728] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
    [ 213.728] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
    [ 213.728] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
    [ 213.728] (--) USB OPTICAL MOUSE: Found relative axes
    [ 213.728] (--) USB OPTICAL MOUSE: Found x and y relative axes
    [ 213.728] (II) USB OPTICAL MOUSE: Configuring as mouse
    [ 213.728] (II) USB OPTICAL MOUSE: Adding scrollwheel support
    [ 213.728] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
    [ 213.728] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 213.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input16/event1"
    [ 213.728] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
    [ 213.728] (II) USB OPTICAL MOUSE: initialized for relative axes.
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
    [ 213.730] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
    [ 213.730] (II) No input driver/identifier specified (ignoring)
    [ 1627.253] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1627.253] (II) intel(0): Printing DDC gathered Modelines:
    [ 1627.253] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1627.311] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1644.964] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1644.964] (II) intel(0): Printing DDC gathered Modelines:
    [ 1644.964] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.027] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.042] (II) intel(0): Allocated new frame buffer 2752x768 stride 11264, tiled
    [ 1645.230] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.230] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.230] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.289] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.307] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.307] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.307] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.365] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.387] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.387] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.387] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.446] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.447] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.447] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.447] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.505] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 2335.972] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 2335.972] (II) intel(0): Printing DDC gathered Modelines:
    [ 2335.972] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 2336.030] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    lspci output
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
    00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
    00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
    00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
    12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
    13:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1)
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
    ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

    No one? I have the exact same problem. MSI x360 laptop, intel onboard graphics. I too use xrandr. I've seen elsewhere that windows users have solved this by turning off GPU overclocking. Maybe this can point us in the right direction?

  • Screen display looks fuzzy using xf86-video-intel on a HP Pavilion 23

    Hello,
    First off I want to say, thank you for Arch! Been using some distros on and off and I think I found my /home! I made a full plunge into Linux a bit ago after some Windows 8.1 issues, switched to Arch and not looking back. Anyways, So far all my computers are either Arch or Manjaro which I am moving more towards straight arch as Manjaro does have some issues when updating your system (dependency loops). All and all not bad, just liking the full control of a pure system then building from scratch.
    Ok, the issue at hand. I have removed Windows 8.1 from my HP All in One Pavilion 23 machine....what a nightmare that was.... Everything was good after turning off secure boot. I installed Arch Linux (3.14.4-1) x86_64, and I am having issues getting the xf86-video-intel driver to play nice with X.
    I have taken a screenshot:
    Screenshot
    I notice this starts right after the choosing the Arch Linux from the boot option menu. It starts the load nice and crisp but after a second the screen flickers with some lines at the top of the screen, random colors, only about the top 3rd of the screen. This modules begin to load but the terminal text looks blocky and horrible.
    I am using Openbox 3.5.2-6 with slim 1.3.6-4. Running xorg-server 1.15.1-1 and xorg-server-utils 7.6-3 with all the dependencies of course.
    Output from pacman queries for video drivers
    xf86-video-intel 2.99.911-2
    xf86-video-vesa 2.3.2-4
    lspci output
    00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
    00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
    00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
    00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
    00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
    00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation H87 Express LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
    03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
    04:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
    my /etc/mkinitcpio.conf
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run. Advanced users may wish to specify all system modules
    # in this array. For instance:
    # MODULES="piix ide_disk reiserfs"
    MODULES="i915"
    # BINARIES
    # This setting includes any additional binaries a given user may
    # wish into the CPIO image. This is run last, so it may be used to
    # override the actual binaries included by a given hook
    # BINARIES are dependency parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in any way. This is useful for config files.
    FILES=""
    # HOOKS
    # This is the most important setting in this file. The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    ## This setup specifies all modules in the MODULES setting above.
    ## No raid, lvm2, or encrypted root is needed.
    # HOOKS="base"
    ## This setup will autodetect all modules for your system and should
    ## work as a sane default
    # HOOKS="base udev autodetect block filesystems"
    ## This setup will generate a 'full' image which supports most systems.
    ## No autodetection is done.
    # HOOKS="base udev block filesystems"
    ## This setup assembles a pata mdadm array with an encrypted root FS.
    ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
    # HOOKS="base udev block mdadm encrypt filesystems"
    ## This setup loads an lvm2 volume group on a usb device.
    # HOOKS="base udev block lvm2 filesystems"
    ## NOTE: If you have /usr on a separate partition, you MUST include the
    # usr, fsck and shutdown hooks.
    HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
    # COMPRESSION
    # Use this to compress the initramfs image. By default, gzip compression
    # is used. Use 'cat' to create an uncompressed image.
    #COMPRESSION="gzip"
    #COMPRESSION="bzip2"
    #COMPRESSION="lzma"
    #COMPRESSION="xz"
    #COMPRESSION="lzop"
    #COMPRESSION="lz4"
    # COMPRESSION_OPTIONS
    # Additional options for the compressor
    #COMPRESSION_OPTIONS=""
    ,my /etc/default/grub.conf
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
    GRUB_CMDLINE_LINUX=""
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    #GRUB_HIDDEN_TIMEOUT=5
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    GRUB_GFXMODE=auto
    # Uncomment to allow the kernel use the same resolution used by grub
    GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    #GRUB_COLOR_NORMAL="light-blue/black"
    #GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    #GRUB_BACKGROUND="/path/to/wallpaper"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    #GRUB_SAVEDEFAULT="true"
    And last my /var/log/Xorg.0.log
    [ 15.641]
    X.Org X Server 1.15.1
    Release Date: 2014-04-13
    [ 15.641] X Protocol Version 11, Revision 0
    [ 15.641] Build Operating System: Linux 3.14.0-4-ARCH x86_64
    [ 15.641] Current Operating System: Linux localhost 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
    [ 15.641] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0c1916a0-b631-478f-ac6b-aa5d123f75cd rw quiet splash
    [ 15.641] Build Date: 14 April 2014 08:39:09AM
    [ 15.641]
    [ 15.641] Current version of pixman: 0.32.4
    [ 15.641] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 15.641] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 15.641] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 1 17:05:15 2014
    [ 15.687] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 15.687] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 15.739] (==) No Layout section. Using the first Screen section.
    [ 15.739] (==) No screen section available. Using defaults.
    [ 15.739] (**) |-->Screen "Default Screen Section" (0)
    [ 15.739] (**) | |-->Monitor "<default monitor>"
    [ 15.764] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 15.764] (**) | |-->Device "Intel Graphics"
    [ 15.764] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 15.764] (==) Automatically adding devices
    [ 15.764] (==) Automatically enabling devices
    [ 15.764] (==) Automatically adding GPU devices
    [ 15.793] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 15.793] Entry deleted from font path.
    [ 15.795] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 15.795] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 15.795] (**) Extension "Composite" is enabled
    [ 15.795] (**) Extension "RENDER" is enabled
    [ 15.795] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 15.795] (II) Loader magic: 0x804c80
    [ 15.795] (II) Module ABI versions:
    [ 15.795] X.Org ANSI C Emulation: 0.4
    [ 15.795] X.Org Video Driver: 15.0
    [ 15.795] X.Org XInput driver : 20.0
    [ 15.796] X.Org Server Extension : 8.0
    [ 15.796] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 15.798] (--) PCI:*(0:0:2:0) 8086:0412:103c:2b0f rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
    [ 15.798] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 15.798] Initializing built-in extension Generic Event Extension
    [ 15.798] Initializing built-in extension SHAPE
    [ 15.798] Initializing built-in extension MIT-SHM
    [ 15.798] Initializing built-in extension XInputExtension
    [ 15.798] Initializing built-in extension XTEST
    [ 15.798] Initializing built-in extension BIG-REQUESTS
    [ 15.798] Initializing built-in extension SYNC
    [ 15.798] Initializing built-in extension XKEYBOARD
    [ 15.798] Initializing built-in extension XC-MISC
    [ 15.798] Initializing built-in extension SECURITY
    [ 15.798] Initializing built-in extension XINERAMA
    [ 15.798] Initializing built-in extension XFIXES
    [ 15.798] Initializing built-in extension RENDER
    [ 15.799] Initializing built-in extension RANDR
    [ 15.799] Initializing built-in extension COMPOSITE
    [ 15.799] Initializing built-in extension DAMAGE
    [ 15.799] Initializing built-in extension MIT-SCREEN-SAVER
    [ 15.799] Initializing built-in extension DOUBLE-BUFFER
    [ 15.799] Initializing built-in extension RECORD
    [ 15.799] Initializing built-in extension DPMS
    [ 15.799] Initializing built-in extension Present
    [ 15.799] Initializing built-in extension DRI3
    [ 15.799] Initializing built-in extension X-Resource
    [ 15.799] Initializing built-in extension XVideo
    [ 15.799] Initializing built-in extension XVideo-MotionCompensation
    [ 15.799] Initializing built-in extension XFree86-VidModeExtension
    [ 15.799] Initializing built-in extension XFree86-DGA
    [ 15.799] Initializing built-in extension XFree86-DRI
    [ 15.799] Initializing built-in extension DRI2
    [ 15.799] (II) "glx" will be loaded by default.
    [ 15.799] (II) LoadModule: "dri2"
    [ 15.799] (II) Module "dri2" already built-in
    [ 15.799] (II) LoadModule: "glamoregl"
    [ 15.808] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 15.917] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 15.917] compiled for 1.15.0, module version = 0.6.0
    [ 15.917] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 15.917] (II) LoadModule: "glx"
    [ 15.917] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 15.928] (II) Module glx: vendor="X.Org Foundation"
    [ 15.929] compiled for 1.15.1, module version = 1.0.0
    [ 15.929] ABI class: X.Org Server Extension, version 8.0
    [ 15.929] (==) AIGLX enabled
    [ 15.929] Loading extension GLX
    [ 15.929] (II) LoadModule: "intel"
    [ 15.929] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 15.955] (II) Module intel: vendor="X.Org Foundation"
    [ 15.955] compiled for 1.15.0, module version = 2.99.911
    [ 15.955] Module class: X.Org Video Driver
    [ 15.955] ABI class: X.Org Video Driver, version 15.0
    [ 15.955] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 15.956] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
    [ 15.956] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
    [ 15.956] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
    [ 15.956] (++) using VT number 7
    [ 15.971] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
    [ 15.971] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
    [ 15.971] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 15.971] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 15.971] (==) intel(0): RGB weight 888
    [ 15.971] (==) intel(0): Default visual is TrueColor
    [ 15.971] (**) intel(0): Option "AccelMethod" "sna"
    [ 15.971] (**) intel(0): Option "DRI" "true"
    [ 15.971] (**) intel(0): Option "TearFree" "true"
    [ 15.972] (**) intel(0): Framebuffer tiled
    [ 15.972] (**) intel(0): Pixmaps tiled
    [ 15.972] (**) intel(0): "Tear free" enabled
    [ 15.972] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 15.972] (II) intel(0): Output eDP1 has no monitor section
    [ 15.972] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output eDP1
    [ 15.972] (II) intel(0): Output VGA1 has no monitor section
    [ 15.972] (II) intel(0): Output DP1 has no monitor section
    [ 15.972] (II) intel(0): Output HDMI1 has no monitor section
    [ 15.972] (II) intel(0): Output DP2 has no monitor section
    [ 15.972] (II) intel(0): Output HDMI2 has no monitor section
    [ 15.972] (II) intel(0): Output VIRTUAL1 has no monitor section
    [ 15.972] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
    [ 15.972] (==) intel(0): DPI set to (96, 96)
    [ 15.972] (II) Loading sub module "dri2"
    [ 15.972] (II) LoadModule: "dri2"
    [ 15.972] (II) Module "dri2" already built-in
    [ 15.972] (==) Depth 24 pixmap format is 32 bpp
    [ 15.986] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
    [ 15.986] (==) intel(0): Backing store enabled
    [ 15.986] (==) intel(0): Silken mouse enabled
    [ 15.986] (II) intel(0): HW Cursor enabled
    [ 15.986] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 15.987] (==) intel(0): DPMS enabled
    [ 15.987] (II) intel(0): [DRI2] Setup complete
    [ 15.987] (II) intel(0): [DRI2] DRI driver: i965
    [ 15.987] (II) intel(0): [DRI2] VDPAU driver: i965
    [ 15.987] (II) intel(0): direct rendering: DRI2 Enabled
    [ 15.987] (==) intel(0): hotplug detection: "enabled"
    [ 15.987] (--) RandR disabled
    [ 16.067] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 16.067] (II) AIGLX: enabled GLX_ARB_create_context
    [ 16.067] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 16.067] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 16.067] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 16.067] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 16.067] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 16.067] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 16.067] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 16.067] (II) AIGLX: enabled GLX_ARB_create_context_robustness
    [ 16.067] (II) AIGLX: Loaded and initialized i965
    [ 16.067] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 16.085] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 16.107] (II) intel(0): Setting screen physical size to 508 x 285
    [ 16.375] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 16.375] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 16.375] (II) LoadModule: "evdev"
    [ 16.383] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 16.402] (II) Module evdev: vendor="X.Org Foundation"
    [ 16.402] compiled for 1.15.1, module version = 2.9.0
    [ 16.402] Module class: X.Org XInput Driver
    [ 16.402] ABI class: X.Org XInput driver, version 20.0
    [ 16.402] (II) Using input driver 'evdev' for 'Power Button'
    [ 16.402] (**) Power Button: always reports core events
    [ 16.402] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 16.402] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 16.402] (--) evdev: Power Button: Found keys
    [ 16.402] (II) evdev: Power Button: Configuring as keyboard
    [ 16.402] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 16.402] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 16.402] (**) Option "xkb_rules" "evdev"
    [ 16.402] (**) Option "xkb_model" "pc104"
    [ 16.402] (**) Option "xkb_layout" "us"
    [ 16.442] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
    [ 16.442] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 16.442] (II) Using input driver 'evdev' for 'Video Bus'
    [ 16.442] (**) Video Bus: always reports core events
    [ 16.442] (**) evdev: Video Bus: Device: "/dev/input/event2"
    [ 16.442] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 16.442] (--) evdev: Video Bus: Found keys
    [ 16.442] (II) evdev: Video Bus: Configuring as keyboard
    [ 16.442] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input2/event2"
    [ 16.442] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 16.442] (**) Option "xkb_rules" "evdev"
    [ 16.442] (**) Option "xkb_model" "pc104"
    [ 16.442] (**) Option "xkb_layout" "us"
    [ 16.443] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 16.443] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 16.443] (II) Using input driver 'evdev' for 'Power Button'
    [ 16.443] (**) Power Button: always reports core events
    [ 16.443] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 16.443] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 16.443] (--) evdev: Power Button: Found keys
    [ 16.443] (II) evdev: Power Button: Configuring as keyboard
    [ 16.443] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [ 16.443] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 16.443] (**) Option "xkb_rules" "evdev"
    [ 16.443] (**) Option "xkb_model" "pc104"
    [ 16.443] (**) Option "xkb_layout" "us"
    [ 16.444] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 16.444] (II) config/udev: Adding input device HP High Definition 1MP Webcam (/dev/input/event8)
    [ 16.444] (**) HP High Definition 1MP Webcam: Applying InputClass "evdev keyboard catchall"
    [ 16.444] (II) Using input driver 'evdev' for 'HP High Definition 1MP Webcam'
    [ 16.444] (**) HP High Definition 1MP Webcam: always reports core events
    [ 16.444] (**) evdev: HP High Definition 1MP Webcam: Device: "/dev/input/event8"
    [ 16.444] (--) evdev: HP High Definition 1MP Webcam: Vendor 0x4f2 Product 0xb40b
    [ 16.444] (--) evdev: HP High Definition 1MP Webcam: Found keys
    [ 16.444] (II) evdev: HP High Definition 1MP Webcam: Configuring as keyboard
    [ 16.444] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input8/event8"
    [ 16.444] (II) XINPUT: Adding extended input device "HP High Definition 1MP Webcam" (type: KEYBOARD, id 9)
    [ 16.444] (**) Option "xkb_rules" "evdev"
    [ 16.444] (**) Option "xkb_model" "pc104"
    [ 16.445] (**) Option "xkb_layout" "us"
    [ 16.445] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/event14)
    [ 16.445] (**) NextWindow Touchscreen: Applying InputClass "evdev touchscreen catchall"
    [ 16.445] (II) Using input driver 'evdev' for 'NextWindow Touchscreen'
    [ 16.445] (**) NextWindow Touchscreen: always reports core events
    [ 16.445] (**) evdev: NextWindow Touchscreen: Device: "/dev/input/event14"
    [ 16.445] (--) evdev: NextWindow Touchscreen: Vendor 0x1926 Product 0x33e
    [ 16.445] (--) evdev: NextWindow Touchscreen: Found absolute axes
    [ 16.445] (--) evdev: NextWindow Touchscreen: Found absolute multitouch axes
    [ 16.445] (II) evdev: NextWindow Touchscreen: No buttons found, faking one.
    [ 16.445] (--) evdev: NextWindow Touchscreen: Found x and y absolute axes
    [ 16.445] (--) evdev: NextWindow Touchscreen: Found absolute touchscreen
    [ 16.445] (II) evdev: NextWindow Touchscreen: Configuring as touchscreen
    [ 16.445] (**) evdev: NextWindow Touchscreen: YAxisMapping: buttons 4 and 5
    [ 16.445] (**) evdev: NextWindow Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 16.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1926:033E.0001/input/input14/event14"
    [ 16.446] (II) XINPUT: Adding extended input device "NextWindow Touchscreen" (type: TOUCHSCREEN, id 10)
    [ 16.446] (II) evdev: NextWindow Touchscreen: initialized for absolute axes.
    [ 16.446] (**) NextWindow Touchscreen: (accel) keeping acceleration scheme 1
    [ 16.446] (**) NextWindow Touchscreen: (accel) acceleration profile 0
    [ 16.446] (**) NextWindow Touchscreen: (accel) acceleration factor: 2.000
    [ 16.446] (**) NextWindow Touchscreen: (accel) acceleration threshold: 4
    [ 16.446] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/mouse2)
    [ 16.446] (II) No input driver specified, ignoring this device.
    [ 16.446] (II) This device may have been added with another device file.
    [ 16.447] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/event9)
    [ 16.447] (II) No input driver specified, ignoring this device.
    [ 16.447] (II) This device may have been added with another device file.
    [ 16.447] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/event10)
    [ 16.447] (**) NextWindow Touchscreen: Applying InputClass "evdev pointer catchall"
    [ 16.447] (II) Using input driver 'evdev' for 'NextWindow Touchscreen'
    [ 16.447] (**) NextWindow Touchscreen: always reports core events
    [ 16.447] (**) evdev: NextWindow Touchscreen: Device: "/dev/input/event10"
    [ 16.447] (--) evdev: NextWindow Touchscreen: Vendor 0x1926 Product 0x33e
    [ 16.447] (--) evdev: NextWindow Touchscreen: Found 3 mouse buttons
    [ 16.447] (--) evdev: NextWindow Touchscreen: Found absolute axes
    [ 16.447] (--) evdev: NextWindow Touchscreen: Found x and y absolute axes
    [ 16.447] (--) evdev: NextWindow Touchscreen: Found absolute touchscreen
    [ 16.447] (II) evdev: NextWindow Touchscreen: Configuring as touchscreen
    [ 16.447] (**) evdev: NextWindow Touchscreen: YAxisMapping: buttons 4 and 5
    [ 16.447] (**) evdev: NextWindow Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 16.448] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.2/0003:1926:033E.0003/input/input10/event10"
    [ 16.448] (II) XINPUT: Adding extended input device "NextWindow Touchscreen" (type: TOUCHSCREEN, id 11)
    [ 16.448] (II) evdev: NextWindow Touchscreen: initialized for absolute axes.
    [ 16.448] (**) NextWindow Touchscreen: (accel) keeping acceleration scheme 1
    [ 16.448] (**) NextWindow Touchscreen: (accel) acceleration profile 0
    [ 16.448] (**) NextWindow Touchscreen: (accel) acceleration factor: 2.000
    [ 16.448] (**) NextWindow Touchscreen: (accel) acceleration threshold: 4
    [ 16.448] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/js0)
    [ 16.448] (II) No input driver specified, ignoring this device.
    [ 16.448] (II) This device may have been added with another device file.
    [ 16.449] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/mouse0)
    [ 16.449] (II) No input driver specified, ignoring this device.
    [ 16.449] (II) This device may have been added with another device file.
    [ 16.449] (II) config/udev: Adding input device Hewlett Packard HP Wireless Keyboard Kit (/dev/input/event11)
    [ 16.449] (**) Hewlett Packard HP Wireless Keyboard Kit: Applying InputClass "evdev keyboard catchall"
    [ 16.449] (II) Using input driver 'evdev' for 'Hewlett Packard HP Wireless Keyboard Kit'
    [ 16.449] (**) Hewlett Packard HP Wireless Keyboard Kit: always reports core events
    [ 16.449] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: Device: "/dev/input/event11"
    [ 16.449] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Vendor 0x461 Product 0x4e25
    [ 16.449] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found keys
    [ 16.449] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Configuring as keyboard
    [ 16.449] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:0461:4E25.0004/input/input11/event11"
    [ 16.449] (II) XINPUT: Adding extended input device "Hewlett Packard HP Wireless Keyboard Kit" (type: KEYBOARD, id 12)
    [ 16.449] (**) Option "xkb_rules" "evdev"
    [ 16.449] (**) Option "xkb_model" "pc104"
    [ 16.449] (**) Option "xkb_layout" "us"
    [ 16.450] (II) config/udev: Adding input device Hewlett Packard HP Wireless Keyboard Kit (/dev/input/event12)
    [ 16.450] (**) Hewlett Packard HP Wireless Keyboard Kit: Applying InputClass "evdev keyboard catchall"
    [ 16.450] (II) Using input driver 'evdev' for 'Hewlett Packard HP Wireless Keyboard Kit'
    [ 16.450] (**) Hewlett Packard HP Wireless Keyboard Kit: always reports core events
    [ 16.450] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: Device: "/dev/input/event12"
    [ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Vendor 0x461 Product 0x4e25
    [ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found 1 mouse buttons
    [ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found scroll wheel(s)
    [ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found relative axes
    [ 16.450] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Forcing relative x/y axes to exist.
    [ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found absolute axes
    [ 16.450] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Forcing absolute x/y axes to exist.
    [ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found keys
    [ 16.450] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Configuring as mouse
    [ 16.450] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Configuring as keyboard
    [ 16.450] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Adding scrollwheel support
    [ 16.450] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: YAxisMapping: buttons 4 and 5
    [ 16.450] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 16.450] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:0461:4E25.0005/input/input12/event12"
    [ 16.450] (II) XINPUT: Adding extended input device "Hewlett Packard HP Wireless Keyboard Kit" (type: KEYBOARD, id 13)
    [ 16.450] (**) Option "xkb_rules" "evdev"
    [ 16.450] (**) Option "xkb_model" "pc104"
    [ 16.450] (**) Option "xkb_layout" "us"
    [ 16.451] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: initialized for relative axes.
    [ 16.451] (WW) evdev: Hewlett Packard HP Wireless Keyboard Kit: ignoring absolute axes.
    [ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) keeping acceleration scheme 1
    [ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration profile 0
    [ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration factor: 2.000
    [ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration threshold: 4
    [ 16.451] (II) config/udev: Adding input device Hewlett Packard HP Wireless Keyboard Kit (/dev/input/event13)
    [ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: Applying InputClass "evdev pointer catchall"
    [ 16.451] (II) Using input driver 'evdev' for 'Hewlett Packard HP Wireless Keyboard Kit'
    [ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: always reports core events
    [ 16.451] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: Device: "/dev/input/event13"
    [ 16.452] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Vendor 0x461 Product 0x4e25
    [ 16.452] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found 3 mouse buttons
    [ 16.452] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found scroll wheel(s)
    [ 16.452] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found relative axes
    [ 16.452] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found x and y relative axes
    [ 16.452] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Configuring as mouse
    [ 16.452] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Adding scrollwheel support
    [ 16.452] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: YAxisMapping: buttons 4 and 5
    [ 16.452] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 16.452] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/0003:0461:4E25.0006/input/input13/event13"
    [ 16.452] (II) XINPUT: Adding extended input device "Hewlett Packard HP Wireless Keyboard Kit" (type: MOUSE, id 14)
    [ 16.452] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: initialized for relative axes.
    [ 16.452] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) keeping acceleration scheme 1
    [ 16.452] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration profile 0
    [ 16.452] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration factor: 2.000
    [ 16.452] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration threshold: 4
    [ 16.452] (II) config/udev: Adding input device Hewlett Packard HP Wireless Keyboard Kit (/dev/input/mouse1)
    [ 16.452] (II) No input driver specified, ignoring this device.
    [ 16.452] (II) This device may have been added with another device file.
    [ 16.453] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    [ 16.453] (II) No input driver specified, ignoring this device.
    [ 16.453] (II) This device may have been added with another device file.
    [ 16.453] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
    [ 16.453] (II) No input driver specified, ignoring this device.
    [ 16.453] (II) This device may have been added with another device file.
    [ 16.453] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event4)
    [ 16.453] (II) No input driver specified, ignoring this device.
    [ 16.453] (II) This device may have been added with another device file.
    [ 16.453] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 16.453] (II) No input driver specified, ignoring this device.
    [ 16.453] (II) This device may have been added with another device file.
    [ 16.454] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
    [ 16.454] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 16.454] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 16.454] (**) HP WMI hotkeys: always reports core events
    [ 16.454] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
    [ 16.454] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 16.454] (--) evdev: HP WMI hotkeys: Found keys
    [ 16.454] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 16.454] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
    [ 16.454] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
    [ 16.454] (**) Option "xkb_rules" "evdev"
    [ 16.454] (**) Option "xkb_model" "pc104"
    [ 16.454] (**) Option "xkb_layout" "us"
    [ 1192.410] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 1811.202] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 5455.421] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none

    I saw your post, and had found it incredulous that you have a 1920x1080 display.  A bit of research and I found I was wrong.
    So, it appears you are driving the panel at its native resolution.  Unfortunately, trying to determine what you mean by "Fuzzy" is probably going to be like trying to nail Jello to a tree.  But, let's give it a shot.  Is it fuzzy before you start X?  Are lines and shapes fuzzy? Or is it just text that is fuzzy?
    If it is just fonts, it could be a problem with hinting.  Hinting is where the edges of fonts are deliberately fuzzed and feathered to get the kerning correct when the physical pixels of the display don't quite line up.  This works well, unless the thing doing the hinting does not understand the geometry of the display.  In a color LCD, each pixel is actually made up of smaller sub pixels, generally three -- A red, a green, and a blue.  Green is usually in the middle.  Some displays have Two greens per pixel, arranged RGBG.  Some displays even have yellow subpixels.  Sometimes the subpixels are arranged left to right, sometimes they are arranged top to bottom.  Long story short, if you have hinting enabled, but the geometry is configured incorrectly, bad things happen.   Take a look at this wiki article

  • My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    Wow!  I think I had this same issue just last night.
    I was cleaning my macbook pro retina on the outside.  Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly.  It looked super strange, it was like green halo's and it looked worse when looking at it at an angle.  Of course I took no pictures!!!  I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
    But I digress...  The image looked very green and spacey, it was almost a neat effect.  After about 5 minutes it started to look a little more digital though.  There were straight lines of this halo effect on the edges and top.  After about 10 minutes it turned into a predominate issue with the blacks on screen.  I could open a web browser and it was unnoticable on a white background.  After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle.  After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange.  But I believe that might be all in my head now.
    So yerp, lemme know what you guys figure out.

  • Brand New Iphone 5s Home Screen display defect

    Here goes my ordeal with my Iphone 5s upgrade
    After waiting in line for over an hour I purchased the Iphone 5s yesterday at Best Buy (Stonebriar, Frisco, TX). Later that evening, I noticed that when the time was 5:36, the home screen display was not showing the digit 6. Instead it showed a blur. I then changed the time manually to 6:36 and then to 6:43 and each time there was a digit 6 the display showed a blur instead. I must note that the phone was sitting in the grass which was a little moist (which I believe was the causing the issue). I immediately went back to the Best Buy location where I purchased the phone and requested a replacement after showing the defect. The store manager wanted me to wait in the line and I refused to do so (they sold me a defective phone so I did not see a reason why I had to go in that line all over again when it was just a replacement!). Anyways, after a tiff with the manager I left that store with my defective phone.
    Next day, I went to the Apple store (Willowbend mall, Plano). I was greeted by genteleman at the entrance of the store who nicely asked if he could help. The moment I told him I suspected my new Iphone 5s was defective he said 'What!!' and made an expression of disbilief. Funny! I was asked to go to another peson who was standing and waving his hand further inside the store. I go to him and explain to him the problem and when I try to demonstrate it does not happen! Oh dear! Luckily I had enough screenshots in store and I showed them all to the store clerk.  He then tells me that he can take the phone in for me and get it 'repaired'! In disbilief I ask him if he meant 'Replaced'? He says no, they will try to repair it first - he further speculates saying they will try a restore or maybe a front glass replacement and that if they still can't fix it, Apple will then replace the phone. In exasperation I tried to explain to him that the problem happened yesterday and then today it can't doesn't seem to happen, while adding that it is a brand NEW phone I purchased less than 24 hours ago and that I still am under the 14 day time-frame. I explain to him kindly that I would not be able to verify the fix (Apple does a restore or even changes the glass and returns me the phone and I must believe that the problem was fixed?? - Hel No!) and its not so nice to hear from Apple that they can't take responsibility for a defective product. He kindly says sorry and explains that it is policy and that they have to try to repair first. Oh how I wish I could've gotten Apple to sign my policy document for my money...sigh..don't work like that! So I left Apple and ran across to Best Buy mobile store asking for a replacement. The guy says Best Buy mother store and Best Buy Mobile store keep there own stock during holidays and he can't help. Sweet! I drive down 10 miles and go to a different Best Buy 'Mother' store and of course I'm asked to stand in the line. I swallow my pride and become a part of the line. My turn comes and again I explain the problem and of course the Best Buy clerk says 'Did you try a restore?' What!! Anyways, after a bit of reasoning (cribbing) with a couple of Best Buy agents, I was able to get them to replace my Iphone 5s (and of course they didn't have a gold color so I had to settle for the space gray..not a big deal though as long as this one is not defective also!)
    So anybody had this display issue? Issue with Apple customer service?
    Rs,
    GH

    Well they offered to do everything they could to work with you on the device....You are right in saying that the offered what they 'could'. Unfortunately what they could was tied by company policy.
    Just like being human there are times things just go wrong- 2 out 2 IPhones 5s in 2 days! I hope people are doing better :-p
    You fought against people at the store level who have /zero/ control over policy and had their hands tied by what theri bosses tell them to do. Agreed. I left instead of fighting. Unfortunately they are the first line of support and a manager maybe as far I'd get. Would love to chat with Steve Jobs but I guess now there is only one way for that :-p
    They not only rushed you to get service to repair the device but you didn't even do any troubleshooting of your own to try to repair it. Now what if a restore had fixed your issue, you would have kept your device, your color, and what you paid for... - I disagree. If you read my original post, the problem happened the same evening I bought the phone. When I went to Apple I was not able to reproduce the issue. So you tell me how do I verify that restore fixed it? Wait and watch? After 14 days I can't even return the phone. The other speculation made by the rep was changing the glass. I would not try that for obvious reasons.
    Why /wouldn't/ you try to repair something before spending your gas/time to replace it the moment something is amiss.
    hmmm..
    Now the 2nd new phone makes a rattling sound. Something is loose inside..I'd rather spend gas/time and return it than get them 'repair' it or give me a refurbished phone! Why? Because I can at this point and still get a new one with possibly no defects(fingers crossed) or I could find a company that makes better quality products :-p

  • Can I get my dock to appear on the extended screen display?

    I would like to have my dock appear on my extended screen display and my lap top screen. Is this possible?
    The thing that is frusterating is when I click on my dock, i have to drag everything that it pulls up onto the extended screen. I would much rather just click on the dock and have it appear on my extended screen without me having to drag it over. If I cant have my dock on both screens, is there a way that I can make my external display be the primary display and my mb pro be the secondary display?

    Hi Scott,
    If you want the dock on the side, rather than the bottom, you can have it on the right hand side of the right hand monitor, or the left hand side of the left hand monitor. One option, I guess would be to reconfigure things with the 24" as the primary screen, but to the left of the MBP, if you want the dock on the left. Probably not what you want for other reasons, but at least it would get the dock where you want it.
    Another option might be to try the third party shareware application "Dock-it" , which allows you to create your own configurable "docks" in various locations. THis actually allows you to choose which monitor you want to locate any particular dock on, and allows placement on the sides of either or both. see http://www.gideonsoftworks.com/dockit.html
    I'd been thinking about suggesting this app to Brett, too, but couldn't find the link at the time. I've been playing with it a bit since , and it certainly has some useful possibilities. The docks it creates are a little less intuitive than the Apple one, and a bit fussier to add things to, though.
    Cheers
    Rod

  • Photoshop CC 2014 No Longer Displaying Blue In The Color Picker Or Workspace, Only Purples.

    Photoshop CC 2014 is no longer displaying blue in the color picker and on screen, only purple, violet, magenta, etc. I think it started about 3 days ago. Our current model 2.9 GHz iMac with NVIDIA GeForce GT 750M 1024 MB Graphics Card and 8 GB RAM is calibrated to 100% via Spyder 4 Express, and reflects that in every application except Photoshop CC 2014, so I know it isn't the monitor. Blue is the primary color we use in many of our designs, so this is of upmost importance. I really appreciate any help you could provide, If this isn't fixed ASAP, I don't know what we'll do.
    Thank you so much!

    Ok, so old files are purple, but new files are blue.
    I took a screenshot of my Photoshop work are using Cmd-Shift-3 and it places the screen shot as a png file on my desktop, which I upload with my reply via the Camera icon in the forum reply toolbar.
    I loaded a new RGB/8 file, set the bottom status bar to indicate the color profile (sRGB) and made sure the file tab on the top is visible, so I can see it is RGB/8. Then I used Cmd-shift-k to show my Color Settings before taking the screenshot. The point is to try and see where the problem is coming from, so make a screenshot just like mine with your old purple file.

Maybe you are looking for

  • Context change by DOM parsing Java Mapping in XI

    Hi Team, I would like to know that how can I handle Context Change by DOM Parser Java Mapping in XI.? Suppose  the source XML structure I have like below: <?xml version="1.0" encoding="UTF-8"?> <ns0:Header xmlns:ns0="urn:bp:xi:hr:edm:test:100">    <F

  • I can't print a pdf.

    When I click to print, I'm asked to save pdf. It's already saved. It will not print. What's wrong?

  • Searching for an app

    Hello! I'm looking for an app on Itunes to help me create infomation and other things I wish to put there, so somthing coustomizable that starts blank that I can put my own folders/subfolders and put pictures and text in these. is there anything like

  • Oracle Security Vulnerabilities?

    Hi all, We're running many PHP 5.x applications in a distributed environment that use the OCI client to access Oracle 10g databases. Our server administration group is migrating to a new server and is refusing to install or support the OCI Instant cl

  • Can't Download Anything Adobe after Tech Support "Help"

    I was having trouble installing the trial of InDesign CS5. It told me to uninstall then reinstall. It then would not even let me uninstall it. I tried to use the CS5 clean sweep and that did not work. I then made the biggest mistake of my life and ca