My screen goes blank when receiving or making calls.

My screen goes blank when receiving or making calls. Cannot get back to the tiles window until the other party hangs up.

Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.

Similar Messages

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Screen goes blank when using Patch tool

The only information I've been able to find on this issue thus far was a post that was written during the Photoshop CS6 beta period at http://forums.adobe.com/message/4285375
I am using the final released Photoshop CS6 software, not beta, and am having the same issue with the Patch tool. I start to drag around an area to make a selecton, and the screen goes blank so that I can't see where I'm making the selection. When I release the mouse, the image appears again. Another problem which may be related is that sometimes when I zoom in, the screen goes blank. Closing Photoshop and re-launching it usually fixes the problem, but is an annoying time-waster. I have the most current update from the Cloud for Photoshop CS6, 13.1.2.X64.
Does anyone know a fix for this?

RAM is 12 GB. I'm not sure which numbers are relevant for VRAM and scratch drive, but this is what I found for video card properties:
Total Available Graphics Memory: 2809 MB
Dedicated Video memory: 1024 MB
System Video Memory: 0 MB
Shard System Memory: 1785 MB

Excel for mac ver14.4.1 screen goes blank when i change to & from full screen view

when i'm working on an excel document, if i am in full screen and hit escape to go non full screen the document goes blank.
if i hit the full screen arrows again, i see my document momentarily and then the screen goes blank again.
i believe this issue began recently after the most recent version update. i must constantly save my documents in case i go in or
out of full screen view and my page goes blank so i don't lose my work. does anyone else have this issue and what can i do about
it? my macbook uses os x ver 10.7.5. not sure if this is an excel problem or an os x problem.
thanks to anyone who can help me figure this out.

Hi，
As your request is relate to Excel for Mac, better to post your issue to the forum below:
http://answers.microsoft.com/en-us/mac
Thanks for your understanding.
Wind Zhang
TechNet Community Support

HT1414 screen goes blank when pluged in battery ok after a minitue

screen goes blank during uses when pluged in for a minitue is ok

Most iPhones have the Setting Auto-Lock set to 1 minute. So at, 1 minute the screen automatically turns OFF, turns black, blank. You can set this to other time lengths or Never. Tap Settings App > General > Auto-Lock.

My macbook boots up get a screen picture then screen goes blank, when boots up I get the sound then a screen then screen goes black is this a battery problem or something else?

my macbook boots up, I get a screen picture then screen goes blank...I get the start up sound, then a picture, then the screen goes blank but computer is still on..does anyone know what the problem is...do I need a new battery or am i just screwed.

Hello nosaint1961,
It sounds like you are unable to successfully boot your computer to your desktop. I would use the troubleshooting from the following article to help troubleshoot what is happening named:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thank you for using Apple Support Communities.
All the very best,
Sterling

My screen goes blank when I go into Itunes store

It's so annoying! I redeemed a gift card but cannot download anything, because the screen goes blank after literally five seconds. Any ideas?

Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.

Screen goes blank when I open iTunes

WWhen I open iTunes the screen goes blank (white ) freezes up,

Hello m0r5o1t5s,
The following article provides infomation and steps that can help stabilize iTunes.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

Iphone 3gs screen goes blank when it rings/gets a text

My iphone screen goes white when i get an incomming call. I can answer it if i slde my finger across the general area where the answer switch will be.
In order to view the screen after the iphone has locked I have to hit the home button followed by the power button 3 times.
Does anyone know if this can be fixed? If not will i be able to get a replacement. I'd be willing to pay as its out of warranty?
Thanks in advance for any help you can give me!

Remove your case and see how it works. It may be blocking the proximity sensors that turn the screen off/on during a call.
Message was edited by: paulcb

Z10 Screen goes blank, when restarted now rotates between blackberry screen and blue loading screen

Last week I was having issues with my blackberry where the screen was going blank and I had to restart the phone. I had recently installed a software update and so when I took it into Telus the guy explained that the sotware may not hae installed correctly so he walked me through the blackberry restore steps via blakcberry link. So I did restore my blackberry.
But a couple days later, it's back to its old tricks - the screen just goes black and I have to restart it. The trouble it is won't currently restart. At the moment it is rotating between the black and white "Blackberry" screen and the blue loading screen.
Was I unlucky enough to have the software install incorrectly both times, or is there something else going on?

ctyers wrote:
Last week I was having issues with my blackberry where the screen was going blank and I had to restart the phone. I had recently installed a software update and so when I took it into Telus the guy explained that the sotware may not hae installed correctly so he walked me through the blackberry restore steps via blakcberry link. So I did restore my blackberry.
But a couple days later, it's back to its old tricks - the screen just goes black and I have to restart it. The trouble it is won't currently restart. At the moment it is rotating between the black and white "Blackberry" screen and the blue loading screen.
Was I unlucky enough to have the software install incorrectly both times, or is there something else going on?
Blue loading screen? That is hardly known to be a "loading screen".... does the device get out of the blue screen by itself or you have to intervene?

How come whole screen goes blank when cropping ?

As per this previous post
Rosie Perera, "How come whole screen blinks when cropping?" #, 24 May 2007 7:12 pm
I am experiencing the same problems with the same degree of frustration as the OP.
When the mouse/pen is held following a crop the image and pallette windows go blank, and when the pointing device is released the image and pallettes are restored. Again, problem is not easy to replicate, but can happen with the marquee and ruler tools as well - was this issue ever resolved ?

Just done some more experimenting - if you take the palletes outside the main photoshop window, they don't suffer this problem. Also if you take the image window outside of the photoshop window before trying to apply the crop, its image is OK. It seems that only the elements within the main photoshop window are effected. Sounds more like a photoshop bug than a driver problem ??

My screen goes blank when I fast forward

Is there something wrong or is this normal? This happens when I use Airplay to stream something from my Ipad 2 like youtube

I think you are misunderstanding the progress bar on the Apple TV.
The white bar tells you how much of the video the Apple TV has downloaded this can happen faster than Realtime and usually does. The second part to the progress bar is the play head, the play head shows you where you are in the movie.
So for example, when you start a movie the play head is at the beginnin,g as is the white download progress bar. After let's say a minute (of lets say a 30 minute video), the play head will be 1/30th of the way along but the white progress bar maybe 1/4 of the way along, meaning that about 7 1/2 minutes of the video have buffered to the Apple TV.
If at this stage you were to fast forward the video,; whilst the play head is moving within the portion of the white progress bar you will see the video moving quickly. However, once it gets to the end of the white progress bar it runs out of buffered video, and then will show you a black screen, because it has no more video to play.

IPhone screen goes blank when "slide to unlock"e,

good day everyone,
Message was edited by: hnazzal

Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Z2 vibra sometimes goes on when receiving a voice call

This happens occasionally. haven't find any pattern. Vibra is set to OFF, but when I answer to a call, vibra buzzing once. This is very annoying to the caller because the line is already open. Any ideas what can cause this?

thats normal in xperia z2 i also have that but sometimes it will not happen.dont think about that thats only a one time
Do not forget to give kudosand to select the correct answer

IPhone Screen Goes Blank

While making a phone call, when I take the phone away from my ear, the screen goes blank and I cannot end call or see call waiting - finally the screen comes back to slide to unlock, and the phone call is ended.
Anyone else having this issue? Any fixes?

WOW! So that's what the issue is!
Petshows, since getting my 3G last Friday I've been plagued by the same problem. It's been so chronic I suspected a fault in the iPhone itself. My first gen unit never exhibited this behavior so I was on my way to the Apple Store tomorrow to report it to the techs at the Genius Bar. But...
...I'm now convinced that Nathan C. has identified the source of the problem. I use a DLO brand "Jam Jacket" I bought for my original iPhone. It has little cut outs at the top for the position of the proximity sensor and the earpiece. I now suspect that either the 3G proximity sensor is less sensitive or its position is slightly different from the first model and it isn't aligning properly any more.
To test out Nathan C.'s hypothesis, I made a call long enough for the 3G screen to go dark. Lifting it away from my ear, I verified that it was not waking up as it should. I then flexed the upper part of the Jam Jacket's case to reposition the proximity sensor cut out and VOILA! the iPhone screen wakes and I can press the Hang Up button as usual. Now my only issue is whether to modify the cut outs and continue using this case or buy one that avoids the source of the problem.

My screen goes blank when receiving or making calls.

Similar Messages

Maybe you are looking for