My screen has gone dark -and I have done everything I know to fix it.

I've reset it, turned the brightness/backlight up, nothing.  Anyone know how to fix this?

Then it's time to take your iPod  Nano to your local Apple Store or AASP.  Let the staff figure it out. 
 Another resource:  DIY iPod Repair 

Similar Messages

  • My iPad has gone dark and I have done all the things suggested on the webpage.

    My iPad went dark the last time I tried to start it up....tried all the tricks noted on the web page without any help. Let me know your tricks...Virginia74

    virginia74 wrote:
    ..tried all the tricks noted on the web page
    What web page was that?
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Ipod mini screen has gone dark, and when backlight goes on v

    Ipod mini screen has gone dark, and when backlight goes on the centre part with writing etc is almost black with light around edge. will this go? do i need to send it back?

    Maybe your backlight is burning out? That's what I would think when the center is black but the edges have light. I'm not sure if a reset would fix the backlight but you can try (hold the menu and center buttons at the same time until you see the Apple logo and then release). If I were I'd send it back to Apple but do you know if you are still under warranty? You should be if you've had your iPod less than a year.

  • HT4528 my iphone4's screen has gone black and i have received a new warrenty iphone4 replacement.  the instructions want me to remove a sims card from the iphone 4 but from what I can see there is no opening for a sims card.

    my iphone4's screen has gone black and i have received a new warrenty

    If this is a Verizon iPhone 4, there is no SIM slot.
    For non-Verizon iPhone 4, the SIM is on the right side.
    Push a paperclip inbto the hole to eject the SIM tray.
    -> iPhone and iPad: How to remove the SIM card

  • My iPhone has no service And I have done everything as per the instructions given from Apple - it so not my sim as it works in other phones what's wrong with my 5s?

    My iPhone has no service and I have done everything as per instructions from Apple and still nothing works no service it is not my sim either? Help?

    Please post in your native language - this is an international forum so
    someone will respond. Your post does not make sense in English.

  • Hi, my computers hard drive has gone faulty and I have lost everything, how can I get the music from my iPod touch back onto my new computer?

    Thanks to anyone that can help. Have lost everything on my computer and am having to start all over again. Windows by the way. Just want to know how I can get my music etc from my iPod back onto iTunes without losing it all. Have got rid of all the CDs as well! Many thanks, Ian M

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    Hopefully you take the time to back up these files regularly in the future.
    B-rock

  • Ibook screen has gone dark

    I'm helping a friend with a G4 i-book, about 3 years old I think. Today, while working on it, the screen went black. I think it may have gone to sleep but I cannot know for sure. I pressed the F2 key checking to see if he had somehow turned down the brightness but no change. I took it to the window and can see the computer is awake. Using the light, and turning the laptop at a side angle, I can see folders, etc. I went to the dock and found system preferences and clicked on display. The brightness was about half way so I turned it up but the screen stayed just as dark, almost impossoble to see anything. We shut it down and restarted it and while I can see it is on and awake, the screen is so dark you cannot possibly use it or see what is there without holding it up to light with an odd angle.
    I did do a search by many of the posts were about flickering or flashing dark. His screen has gone dark and while I can see things if I 'peer' carefully, the screen is black all the time.
    Any suggestions?
    michelle

    Hey Michelle,
    Most certainly this is a inverter cable issue. Usually they open up near the hinge point. I've repaired two that this happened to. I have also seen two that shorted to ground and took out a tiny fuse on the logic board so after I repaired the short I had to bridge the fuse w/ a fuse link.
    Try moving the display up and down while it's on. If it comes on it's most certainly that cable.
    Richard

  • My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?

    My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?

    have you tried charging the device ?
    if so and it still does not work you can try a Forced Recovery..
    by holding the HOME button down and plugging it into your computer at the same time..
    http://support.apple.com/kb/HT1808

  • My iPad screen has gone black.  I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again.  I can even hear notifications arriving, but I cannot see anything...

    My iPad screen has gone black.  I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again.  I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using.  Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't.  It has not been dropped and has been in a case for years!  Please help!

    When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...

  • We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years) and the screens has gone black and wont turn on.  Phone is charged. We have tried force quit- home screen and top button. help pls

    We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on.  Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer.  help pls

    FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.

  • Having just installed Firefox my screen has gone dark. Can I brighten the screen or not use it as my main Browser?

    Having just installed Firefox for the 1st time my screen has gone dark. I am on a MAC which also has Safari on it. I have made the Firefox the main Browser. Can I make my screen brighter or should I take off Firefox.

    Make an appointment at the Genius Bar of an Apple store. From the troubleshooting you performed and the hotness I suspect a hardware proboem.
    Apple Retail Store - Genius Bar                          
    If under warranty and not bused Apple will exchange it at no cost. Otherwise
    Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
      Apple - iPod Repair price             

  • OfficeJet Printer Pro 8620 - screen has gone dark!

    I have an OfficeJet Pro 8620.   Although it's still able to print, the screen has gone dark so I'm not able to fax or scan any documents.
    Need help ASAP, please!
    Naidia

    Hey @Naidia,
    Thanks for posting in the HP Support Forum.  I would like to assist you with your HP Officejet Pro 8620 e-All-in-One Printer's issue. 
    Just to clarify, is it that your printer display is too dark to easily navigate through the menu items, or is it completely black and non-responsive (save for the printing and faxing functionality you mentioned)? 
    The first thing I suggest is to plug the printer into the wall outlet directly if it is currently in a power surge protector or extension cord. This may sound silly but this will ensure the printer is getting full power and may eliminate any unnecessary troubleshooting. If the printer is no longer getting full power from the power surge or extension cord it may give false errors, have poor connection, paper feed issues and quality issues.
    Secondly, I recommending that you perform a 'hard reset': 
    Reset the printer
    Press the Power button () to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button () to turn it on.
    Please let me know a little more about your printer's issue if these basic steps don't restore your display's regular functionality and visibility. 
    Thank you! 
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • My screen's gone dark, and no amount of button pushing is working. Help!

    Black screen. Nothing.
    I unplugged, no help.

    You need to post more information, telling us the screen has gone dark isn't very informative. The first thing you can let us know is what model iMac you have, what version of OS X and how much RAM it has.
    You can first try doing a SMC reset, you may need to try 2-3x. If that doesn't help try re-starting in Safe Mode.
    SMC RESET
    • Shut down the computer.
    • Unplug the computer's power cord and all peripherals.
    • Press and hold the power button for 5 seconds.
    • Release the power button.
    • Attach the computers power cable.
    • Press the power button to turn on the computer.
    PRAM RESET
    • Shut down the computer.
    • Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    • Turn on the computer.
    • Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Roger

  • My iPod Touch 4G's screen has gone white and has lines on the screen. How do I fix it? Help!

    Hello everyone,
    I've had an iPod Touch 4th generation for a few years now, and, today, for the first time, the screen has gone white and their are vertical lines on it. What happened was I accidentally dropped my iPod Touch on tile and it landed on its back. I tried it out right afterwards to see if it was still working and it seemed like it was perfectly fine. Later on, I got an email from one of my friends, so I slid the email button on the lock screen to see the email. In the email, there was a link to a gif image, so I opened it in Safari. After I was done with it, I closed that tab. I also had a second tab open from earlier, so I wanted to close that tab as well. When I clicked on the button to see all tabs and close one, the screen completely froze. I held on to the on/off button on the top of the iPod, and, after about a minute, the screen switched to a completely white screen with lines on it. I've tried holding onto the on/off button again and it doesn't work. I also tried plugging it into my Windows 7 computer and opening iTunes, but my computer doesn't even recognized it is plugged in. It won't appear under the "computer" section in Windows Explorer, which will allow me to do USB-related tasks with it. iTunes doesn't recognize that it is plugged in either, so I can't do anything like restore the iPod to factory settings. The home button on my iPod hasn't been working for a while so i've always been using the accessibility feature that gives me a home button on the screen. Now that I can't access that, I can't hold down both the on/off button and the home button at the same time. What should I do? Should I send it in to Apple for repairs (which I won't do and would rather buy a new iPod Touch)? I am thinking of just leaving it to, hopefully, have the battery drain and the iPod would die. Then, I could charge it and see what happens. Other than that, i'm just clueless right now and I have no idea what I should do. Please help me!
    My iPod Touch is an iPod Touch 4th generation model with 8GB. It is running iOS 5.1.1.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My 27inch i Mac screen has gone darker, like a colour burn but also a bit washed out. Can anyone advise what may be wrong before I take it for repair?

    My 27inch i Mac screen has gone darker all of a sudden. It's almost like a colour Burn and it's also washed out. Can anyone advise what the problem may be before I take it for repair?

    Check the settings in System Preferences > Universal Access > Seeing > Display.
    It's possible to alter some of those settings accidently by hitting the wrong key combinations.

Maybe you are looking for

  • Creating a new schema in a Logical Standby Database

    Hi All, I am experimenting with logical standby databases for the purpose of reporting, and have not been able to create a new schema in the logical standby database - one of the key features of logical standbys. I have setup primary and logical stan

  • How can I re-format a thumb drive back to MS-DOS(FAT)

    I bought a kingston 16gb thumb drive today, and formatted it to Mac OS X Extended (Journaled, Encrypted) using the disk utility. I was unaware that it will not work with a PC now, only Mac. Is there a way to covert it back to MS-DOS or am I going to

  • Using Existing Template for new pdf's

    How do I use and existing template of pdf's to create new ones.  I just want to copy and past new pics and text where existing pics and text exist in a template that is already made?  Also, How can I make all pictures the same size?

  • Oracle Study material for 1z0-040

    hi, 1z0-040 is an exam for upgrading 9i ocp to 10g ocp.Is there anyone who has oracle study material for the exam code mentioned.If you have pls mail it to [email address removed by moderator for security purposes] or else post d link. Plz its very u

  • ITunes suddenly crashes when trying to play purchased music

    Everything's been OK (other than iTunes randomly rebuilding my music library every week or so...) I download a song from the music store. It attempts to import it and crashes. I manually find the song and drop it into iTunes, it crashes. I won't even