My screen image got very large, like it was super zoomed.

I could open it only by holding one finger on the start of the swipe bar, then carefully moving the screen left with the other until the end of the bar came in view. I turned it off, held both the power and stqrt button down, no change. I plugged it into itunes, updated to 4.3.3, and it worked normal, except the contacts app is in a very large font. I can't get the font smaller in contacts now.

Hi,
Try checking the following settings for your font size:
Press "Settings" on your home screen ( a Silver icon with Gears)
Then choose "General," when you are in general, scroll to the bottom of the page, and choose "Accessibility"
By default, all the settings should say "Off," if not, try choosing each setting pages to turn them off.
cwdlin

Similar Messages

My screen got very large - much so I couldn't access some icons - I turned it off and back on and now it's so big I can't even put my code in to get turned on

My screen got very large - all the icons are huge where I can't see them all. I turned it off and back on and now it's so large I can't even get to all the numbers to unlock it... help

This question was asked and answered about a minute ago.
This is asked and answered very often. The forum search bar is on the right side of this page.
It is also covered in the manual - zoom feature.
Double tap with three fingers.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

My desktop just got very large. How do I shrink it?

My desktop just got very large. How do I shrink it?

If you have a Magic Mouse (and, maybe, this feature works with any scrolling Mouse) go to System Preferences>Mouse>Screen Zoom. See if Screen Zoom has been checked. If so, go to Screen Zoom>Options. There is a drop down menu to select a key or key combination to use while scrolling. When you press this key(s) and scroll, the screen, including the entire Desktop, will Zoom in or out.
For example

I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read. the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

Hello chrispyw,
If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
OS X Yosemite: Adjust your display’s resolution
If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Regards,
Sterling

Display of the images became very large in macbook air, display of the images became very large in macbook air

suddenly the display became very large. it seems like the dsiplay for the handicap as if in ipad. How to restore to normal display? Thank

This link may help http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2368.html

Viewing full screen images gets very slow in PSE 5&6

In full screen preview mode, when going from a horizontal image to a vertical image, it takes several seconds to go to the next image.Have tried turning off and on the resizing option and it had no effect. Viewing 2mb jpgs from a Nikon D200.Have Win XP 64, 8GB Ram, dual core processor and a middle of the road video card.
Could this be a video card issue? Would going to PSE 8 help. does PSE 8 utilize 64 bit OS?

Very interesting. I'm guessing that the portrait photos were rotated by the camera by setting the Orientation field in the photos' metadata, and that for some reason, PSE on your system requires a lot of time to properly rotate them on the fly in Full Screen view. When you edit the photo in the Editor, it rotates the actual image, rather than setting the Orientation field.
For a couple of test photos, try following steps 1 - 3 of this FAQ:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Photos_not_properly
This should have the same effect as editing them in the Editor.

Screen goes to very large numbers

Screen goes to different languages and large numbers

Check Settings > General > Accessibility > all options should be OFF here.
Note: You might need 3 fingers to navigate.

Screen icons become very large and wont reset. restarting is very difficult as slider is off screen. eventually shutting down and restaring gets screen back to normal .however this is happening more often

my iphone 4s icons suddenly magnify on screen. 2 or 3 fill the screen. shutting down and restating fixes the problem as icons are back to normal size. however shutting down is very difficult as red slider is off screen and this is happenong more often. any cures?

Take a look at this link, http://support.apple.com/kb/ts3129

On the iPad Air, how can I get the lock screen to stay on longer like it was with an iPad 2?

Since getting an iPad Air the lock screen does not stay on but for a few seconds after startup, how can I adjust the time of it? It used to stay on with my iPad2.Thanks

I guess I never noticed that the swipe to open doesn't stay on very long. But, I've not found this to be an issue as I usally swipe the moment I have the option to swipe. It's been so long since I had a 2nd generation iPad that I honestly can't remember if it stayed on longer. It's still not a problem for me. There is no setting which will let you keep the swipe to open on longer, so it would reasonable for Apple to say there is nothing wrong with your iPad

My iphone screen turns up very big, how can I set it back to the normal look? Thank u, my iphone screen turns up very big, how can I set it back to the normal look? Thank u

my iphone screen suddenly turns very large and I can't put it back to normal. I tried to turn it off and on again, but still keep the same big screen. Please advise me how can I turn it to normal size again.

Thank you, thank you, thank you! My screen images were so big that I couldn't log in or even slide the control to turn the phone off. The double tap with three fingers gave me the access I needed, and then I was able to turn zoom off via the settings as you suggested.

How To Get rid of Exponential format in datagridview when the number is very large

When the number is very large like :290754232, I got 2.907542E +08. in datagridview cell
I using vb.net , framework 2.0.
how can I get rid of this format?
Thanks in advance

should I change the type of this column to integer or long ?
The datagridview is binded to binding source and a list ( Of).
Mike,
I'll show you an example that shows the correct way to do this and a another way if you're stuck using strings in exponential format. The latter being the "hack way" I spoke about Friday. I don't like it, it's dangerous, but I'll show both anyway.
In this example, I'm using Int64 because I don't know the range of yours. If your never exceeds Int32 then use that one instead.
First, I have a DataGridView with three columns. I've populated the data just by creating longs starting with the maximum value in reverse order for 100 rows:
The way that I created the data is itself not a great way (there's no encapsulation), but for this example "it'll do".
Notice though that the third column (right-most column) isn't formatted at all. I commented out the part that does that so that I could then explain what I'm doing. If it works, it should look like the first column.
The first column represents an actual Int64 and when I show the code, you can see how I'm formatting that using the DGV's DefaultCellStyle.Format property. That's how it SHOULD be done.
The third column though is just a string and because that string contains a letter in it, Long.TryParse will NOT work. This is where the "hack" part comes in - and it's dangerous, but if you have no other option then ...
You can see that now the third column matches the first column. Now the code:
Option Strict On
Option Explicit On
Option Infer Off
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
With DataGridView1
.AllowUserToAddRows = False
.AllowUserToDeleteRows = False
.AllowUserToOrderColumns = False
.AllowUserToResizeRows = False
.AlternatingRowsDefaultCellStyle.BackColor = Color.Aquamarine
.ReadOnly = True
.SelectionMode = DataGridViewSelectionMode.FullRowSelect
.MultiSelect = False
.RowHeadersVisible = False
.RowTemplate.Height = 30
.EnableHeadersVisualStyles = False
With .ColumnHeadersDefaultCellStyle
.Font = New Font("Tahoma", 9, FontStyle.Bold)
.BackColor = Color.LightGreen
.WrapMode = DataGridViewTriState.True
.Alignment = DataGridViewContentAlignment.MiddleCenter
End With
.ColumnHeadersHeightSizeMode = DataGridViewColumnHeadersHeightSizeMode.DisableResizing
.ColumnHeadersHeight = 50
.DataSource = Nothing
.Enabled = False
End With
CreateData()
End Sub
Private Sub CreateData()
Dim longList As New List(Of Long)
For l As Long = Long.MaxValue To 0 Step -1
longList.Add(l)
If longList.Count = 100 Then
Exit For
End If
Next
Dim stringList As New List(Of String)
For Each l As Long In longList
stringList.Add(l.ToString("e18"))
Next
Dim dt As New DataTable
Dim column As New DataColumn
With column
.DataType = System.Type.GetType("System.Int64")
.ColumnName = "Actual Long Value (Shown Formated)"
dt.Columns.Add(column)
End With
column = New DataColumn
With column
.DataType = System.Type.GetType("System.String")
.ColumnName = "String Equivalent"
dt.Columns.Add(column)
End With
column = New DataColumn
With column
.DataType = System.Type.GetType("System.String")
.ColumnName = "Formated String Equivalent"
dt.Columns.Add(column)
End With
Dim row As DataRow
For i As Integer = 0 To longList.Count - 1
row = dt.NewRow
row("Actual Long Value (Shown Formated)") = longList(i)
row("String Equivalent") = stringList(i)
row("Formated String Equivalent") = stringList(i)
dt.Rows.Add(row)
Next
Dim bs As New BindingSource
bs.DataSource = dt
BindingNavigator1.BindingSource = bs
DataGridView1.DataSource = bs
With DataGridView1
With .Columns(0)
.DefaultCellStyle.Format = "n0"
.Width = 150
End With
.Columns(1).Width = 170
.Columns(2).AutoSizeMode = DataGridViewAutoSizeColumnMode.Fill
.Enabled = True
End With
End Sub
' The following is what I commented
' out for the first screenshot. ONLY
' do this if there is absolutely no
' other way though - the following
' casting operation is NOT ADVISABLE!
Private Sub DataGridView1_CellFormatting(ByVal sender As Object, _
ByVal e As System.Windows.Forms.DataGridViewCellFormattingEventArgs) _
Handles DataGridView1.CellFormatting
If e.ColumnIndex = 2 AndAlso e.Value.ToString IsNot Nothing Then
' NOTE! The following is dangerous!
' I'm going to use coercion to force the
' string into a type long. TryParse will
' NOT work here. This can easily throw an
' exception if the string cannot be cast
' to a type long. I'm "depending on" the
' the string to cast. At the very least
' you might put this in a Try/Catch but
' that won't stop it from failing (if
' it doesn't work).
Dim actualValue As Long = CType(e.Value.ToString, Long)
Dim formattedValue As String = actualValue.ToString("n0")
e.Value = formattedValue
End If
End Sub
End Class
Like I said, only use that hack way if there's no other option!
I hope it helps. :)
Still lost in code, just at a little higher level.

Very large values from accelerometer

Hello,
I did a small impact test in the lab, and recorded the acceleration. But I got very large peak numbers, like 300g, which is unreasonable. My vi has been checked by many people, seems like no problem. Does anyone have the idea why I got such big numbers?
Thanks.
Yuan

It would be helpful if you describe your hardware, DAQ , (signal-conditioner with setting) , sensor
and please post a link to the spec-sheet of the sensor and (if you have) the individual sensitivity (cal) value(s) of your sensor. (in metric if possible )
Now read the input voltage at a high sample rate (you can use one of the example vi's ) . If you have a pulse in the diagram hit edit-make current values default, save as a new vi and post that vi.
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Numbers file sizes very large

I've noticed that file sizes in Numbers are very large. I was using Excel for a long time and all the files I created were between 20-30KB. The files consisted of an Excel workbook, with 1-2 worksheets in it. The same files in Numbers are 200-300KB and if I save them over the network from another computer to my computer, they jump up to over 1MB. Any ideas on this?

Hello
Nothing to do with graphics items.
An XL file as well as an AppleWorks one is a compiled document in which many components are stored in a very compact shape. One byte was sufficient in AW to represent an operand as they where aboutone hundred.
In Numbers, everything is described in pure text with complementary delimiters.
When a formula uses the operand "COUNTBLANK" this one appears with its 10 letters.
In XL as well as in AW6, a date is stored as a floating number while in Numbers it's stored as the string "mercredi 23 janvier 2008 22:33:19"
Sama thing for every attributes of every cell.
So this results in a huge file store in XML format. To spare space, when we close a document, the XML file is packed in .gz format.
This is the Index.xml.gz file that we may see clicking a Numbers document wit ctrl depressed and selecting the contextual menu item "Show Package's contents".
Double click onto Index.xml.gz will unpack it.
giving the expanded Index.xml file.
I assumes that they are applications dedicated to XML files.
I don't know them so I just drag and drop the XML file onto a free text editor named Bean which I find really interesting.
Doing that, we may examine the file's contents.
If someone knows a correct free application able to open and display correctly the XML files, I'm interested
Yvan KOENIG (from FRANCE mercredi 23 janvier 2008 22:49:23)

Screen image has suddenly gone very large

Screen image has suddenly increased hugely in size

You may have Zoom turned on. Go to settings, general, accessibility, turn off Zoom.

Editing very large images

I have several very large images that require minor editing. The tasks that I require are only basic rotation, cropping, and maybe minor color adjustments.
The problem is that the images range from 20780 x 15000 px down to 11150 x 2600 px.
With images this size, when I try to perform any operation on the entire image, like a 3 deg rotation, fireworks simply times out. Maybe it is because it can't generate the preview image at that size, maybe it simply can't calculate the image at that size. If it is just the preview image, is there a way to lower the quality (say, jpeg quality of 5%) of the preview image only but when I export the image, I can keep it at 100%?
Thank you,
-Adam
(Yes, I did search, but the forums search seemed mildly useless and engine results consistently returned nothing)

Fireworks is not designed to work with images of this size. It's a screen graphics application. Photoshop would be a better option here, or other software designed for working with high resolution files.
Jim Babbage

My screen image got very large, like it was super zoomed.

Similar Messages

Maybe you are looking for