My screen is blinking!
Hi All hope you can help me out
Everytime I update my drivers on my MS-8850 card (GeForce3 TI200) beyond driver ver. 27.20 I get a blinking that freezes the screen for a second or two.
Do some here know how to fix it?
I could then just use that driver, but I'm using a program that works best with the updated drivers (and within that particular program it do not blink) so...
My system is based upon WinXP and the Mb is a soyo SY-K7V Dragon plus. I have 512 mb of RAM and the processor is AMD xp 1800+.
Please help
Did you do a a clean un-installation and a fresh re-installation of the VGA drivers?
Similar Messages
-
Will a new MotherBoard cure Blank Screen with blinking cursor?
Stuck with Blank Screen with blinking cursor; ESC key couldn’t bring up Startup Menu; OS is not loading
Product Name: HP G62 237 CA Notebook PC
Short description of the problems:
--- Press ESC key couldn’t bring up Startup Menu when booting up
--- Blank screen with blinking cursor thereafter
--- Stuck here forever and OS is not loading
DETAILED INFORMATION:
Product Name and Operating System:
Model: HP G62 237 CA Notebook PC
O/S: Pre-loaded with Win 7 Home Prem
Processor: Pent. Dual-Core CPU T4500 2.30GHz
Memory: 4GB
BIOS Ver. (Insyde): F.17
System BOARD ID: 1484
Product #: WQ767UA#ABC
Product Config ID: 049C110000202710000020000
Problem History:
--- Used to have frequent BSOD (got fixed later because of faulty RAM that I suspected)
--- Window couldn’t be loaded
--- Window Repair and HP Recovery were tried but not functioning
--- OEM Hard Drive was then removed & formatted few times by using other computer
--- Hard Drive was then tested by other computer; it can be installed Win XP & Win 7
--- So, Hard Drive was eliminated from the suspect list
--- Replaced with other good RAM from other computers & put back the OEM Hard Drive to my HP G62; everything worked fine, such as: able to reinstall Win 7; listening to music files; got Internet to download latest BIOS from HP support site; connected to my 42 inched TV as my monitor; and even smoothly updated the BIOS from v.17 to v.37!
--- Also, able to receive Window Updates from the Internet; and seemed that all problems were nicely solved
--- Once I believe my system got stabilized; I went back to test the 2 supposedly problematic RAM to see whether they were both faulty or not, then the whole thing has turned around! Completely screwed me up until this moment …
--- After put back the problematic RAM, Window couldn’t be loaded …
--- With a few error messages… such as,
--- The file is possibly corrupt. The file header checksum does not match the computed checksum;
--- After the next reboot… an unexpected screen message showed up:
Intel ® Cantiga PCI Accelerated SVGA BIOS
Build Number: 1932 PC 14.34 11/11/2009 02:36:14
DECOMPILATION OR DISASSEMBLY PROHIBITED
Copyright © 2000-2003 Intel Corp. All Rights Reserved.
--- After that, OS was not loading …
--- Press ESC key couldn’t bring up the Startup Menu during boot up
--- Blank screen with blinking cursor thereafter and seems stuck here forever
Procedures performed for troubleshooting:
Tried hard reset for more than 5 times (removed battery, AC adapter disconnected and then hold down the Power button for more than 60 secs) and tried reseating memory too; same result with Blank Screen with blinking cursor after each reboot.
Connected to an external monitor [Fn + F4/F5] to see whether there was any display, nothing has showed on the external monitor, it seemed that no connection established between the two.
Finally, took the long journey to follow the Service and Maintenance Guide of HP G62 to remove the CMOS battery for well over 15 minutes and put it back. But the result was again disappointed. Tried 4 times already. The latest error message is:
The CMOS checksum is invalid. The CMOS will be reset to the default configuration and will be rebooted. Please check your BIOS Setup options to see if they change.
CMOS Reset (502)
ENTER – Reboot the system
After this message, the same Blank Screen with blinking cursor came back. And pressing the ESC key couldn’t bring up Startup Menu when booting up …
Note: the fan is still running; the Power button is functioning but seems stuck here forever!
I’ve already carefully read this HP Support document titled “HP BIOS Application Selected is Corrupt or Missing”:
http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443485#N144
If really is the BIOS problems, then I will have the difficulties of updating a Window-based BIOS when I couldn’t even load Window!
(Note: Boot from USB has no point because right now I couldn’t change the boot sequence because the various “Startup Menu” options are not showing up!)
Secondly, I am still stuck with the Blank Screen with a blinking cursor after I passed the first screen of “Press the ESC key for Startup Menu” when re-booted again!
Thirdly, I have formatted my Hard Drive more than 3 times during the last few days for testing; I don’t have the OEM pre-loaded Win 7 with me anyone … and I don’t think I have the UEFI installed previously on my system. I did try hold down the Win Key + B with the most updated BIOS in the attached USB …, it came back with the same blank screen with a cursor blinking after reboot.
Note: the Blank Screen I’m experiencing right now is not completely black, in fact, there is background light from behind the screen and on each reboot, I can see the HP logo and the left corner message of: “Press ESC key for Startup Menu” … So, I suppose that my computer screen is not physically broken at least.
Requests:
Please explain to me that what are the problem areas and the root causes if is possible?
What steps or other tests can be done to make it work again?
Do you think replacing the entire MotherBoard can cure the Blank Screen with blinking cursor?
[Warranty: expired! I am the original purchaser & the end-user of this HP G62; acquired 2 years ago directly from a trustworthy source: staples (in Canada). Would HP Support still willing to service it for an extra charge?]
Thanks in advance for any suggestion and idea!
Owenson
===========================================Stuck with Blank Screen with blinking cursor; ESC key couldn’t bring up Startup Menu; OS is not loading
Product Name: HP G62 237 CA Notebook PC
Short description of the problems:
--- Press ESC key couldn’t bring up Startup Menu when booting up
--- Blank screen with blinking cursor thereafter
--- Stuck here forever and OS is not loading
DETAILED INFORMATION:
Product Name and Operating System:
Model: HP G62 237 CA Notebook PC
O/S: Pre-loaded with Win 7 Home Prem
Processor: Pent. Dual-Core CPU T4500 2.30GHz
Memory: 4GB
BIOS Ver. (Insyde): F.17
System BOARD ID: 1484
Product #: WQ767UA#ABC
Product Config ID: 049C110000202710000020000
Problem History:
--- Used to have frequent BSOD (got fixed later because of faulty RAM that I suspected)
--- Window couldn’t be loaded
--- Window Repair and HP Recovery were tried but not functioning
--- OEM Hard Drive was then removed & formatted few times by using other computer
--- Hard Drive was then tested by other computer; it can be installed Win XP & Win 7
--- So, Hard Drive was eliminated from the suspect list
--- Replaced with other good RAM from other computers & put back the OEM Hard Drive to my HP G62; everything worked fine, such as: able to reinstall Win 7; listening to music files; got Internet to download latest BIOS from HP support site; connected to my 42 inched TV as my monitor; and even smoothly updated the BIOS from v.17 to v.37!
--- Also, able to receive Window Updates from the Internet; and seemed that all problems were nicely solved
--- Once I believe my system got stabilized; I went back to test the 2 supposedly problematic RAM to see whether they were both faulty or not, then the whole thing has turned around! Completely screwed me up until this moment …
--- After put back the problematic RAM, Window couldn’t be loaded …
--- With a few error messages… such as,
--- The file is possibly corrupt. The file header checksum does not match the computed checksum;
--- After the next reboot… an unexpected screen message showed up:
Intel ® Cantiga PCI Accelerated SVGA BIOS
Build Number: 1932 PC 14.34 11/11/2009 02:36:14
DECOMPILATION OR DISASSEMBLY PROHIBITED
Copyright © 2000-2003 Intel Corp. All Rights Reserved.
--- After that, OS was not loading …
--- Press ESC key couldn’t bring up the Startup Menu during boot up
--- Blank screen with blinking cursor thereafter and seems stuck here forever
Procedures performed for troubleshooting:
Tried hard reset for more than 5 times (removed battery, AC adapter disconnected and then hold down the Power button for more than 60 secs) and tried reseating memory too; same result with Blank Screen with blinking cursor after each reboot.
Connected to an external monitor [Fn + F4/F5] to see whether there was any display, nothing has showed on the external monitor, it seemed that no connection established between the two.
Finally, took the long journey to follow the Service and Maintenance Guide of HP G62 to remove the CMOS battery for well over 15 minutes and put it back. But the result was again disappointed. Tried 4 times already. The latest error message is:
The CMOS checksum is invalid. The CMOS will be reset to the default configuration and will be rebooted. Please check your BIOS Setup options to see if they change.
CMOS Reset (502)
ENTER – Reboot the system
After this message, the same Blank Screen with blinking cursor came back. And pressing the ESC key couldn’t bring up Startup Menu when booting up …
Note: the fan is still running; the Power button is functioning but seems stuck here forever!
I’ve already carefully read this HP Support document titled “HP BIOS Application Selected is Corrupt or Missing”:
http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443485#N144
If really is the BIOS problems, then I will have the difficulties of updating a Window-based BIOS when I couldn’t even load Window!
(Note: Boot from USB has no point because right now I couldn’t change the boot sequence because the various “Startup Menu” options are not showing up!)
Secondly, I am still stuck with the Blank Screen with a blinking cursor after I passed the first screen of “Press the ESC key for Startup Menu” when re-booted again!
Thirdly, I have formatted my Hard Drive more than 3 times during the last few days for testing; I don’t have the OEM pre-loaded Win 7 with me anyone … and I don’t think I have the UEFI installed previously on my system. I did try hold down the Win Key + B with the most updated BIOS in the attached USB …, it came back with the same blank screen with a cursor blinking after reboot.
Note: the Blank Screen I’m experiencing right now is not completely black, in fact, there is background light from behind the screen and on each reboot, I can see the HP logo and the left corner message of: “Press ESC key for Startup Menu” … So, I suppose that my computer screen is not physically broken at least.
Requests:
Please explain to me that what are the problem areas and the root causes if is possible?
What steps or other tests can be done to make it work again?
Do you think replacing the entire MotherBoard can cure the Blank Screen with blinking cursor?
[Warranty: expired! I am the original purchaser & the end-user of this HP G62; acquired 2 years ago directly from a trustworthy source: staples (in Canada). Would HP Support still willing to service it for an extra charge?]
Thanks in advance for any suggestion and idea!
Owenson
=========================================== -
I bought and downloaded the windows 7 ultimate edition 64 bit iso, then proceeded to perform a correct burn to a DVD one at the slowest speed and one at the fastest. all went well. so I open Boot Camp assistant and follow the instructions to the letter, downloaded the driver support to the flash drive. partitioned my drive with more than enough room 150 gb. its starts its install. I get through everything seamlessly where I put in my info all with the exception of my activation code. yet it still continues to finalize the install and does another restart. boots back up to either A. black screen saying press any key to boot to my install disk. B. if I take it out just a white curser. also I read it may be because I had the flash drive in while I was trying to boot so I removed it as well, same result. any input would be much appreciated.
Boot Camp- Windows installation boots to black screen with blinking cursor.
-
Black screen w/blinking cursor hp dv6700 please help me out someone!!
My dv6700 running vista 32 bit has shut down on me and when i try to start it I get the first HP screen and then get stuck on a black screen with blinking cursor.....so i can't get to the next screen to press F8.....I went to this page to download iso file to make a recovery cd http://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng&DwnldID=15074 and then used IMGBURN program to burn iso to cd....then put the burned cd into my HP cd drive and started it up but still to the black screen with blinking cursor.....then got into my bios screen on the next try to change boot order to start with cd drive but same thing...black screen blinking cursor.....I really hope someone can help me out here.......I've never posted on any forum ever...always googled everything myself cause i wasn't sure if i'd actually get a response on a forum....so i'm hoping i've been wrong this hole time......
Hi,
I don't think the ISO you downloaded will provide the necessary repair options you need to try, so I'd suggest first creating a retail Vista installation disc and using the repair options this provides. A full description of creating the disc ( including links to the Vista Image downloads ) can be found on the following link.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-vi...
Once created, tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
When loaded, select Repair Your Computer and choose the Command Prompt. When this loads, enter the following commands and hit enter after each one - include spaces as shown.
Bootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot
Remove the Rescue CD and try rebooting the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Windows 7 64-bit black screen and blinking cursor for ages before boot
Help!
I'm having the black screen with blinking cursor whenever I try and boot up Windows 7 Ultimate 64-bit thru Bootcamp on my MacBook Pro. If i let it just sit there for maybe 2 or 3 minutes, it then goes to the Windows Boot Manager screen and allows me to click on Windows 7 and the it boots perfect. I've tried installing it twice, same thing. No problem booting OS X Snow Leo 10.6.3. Got the right NVidia drivers installed, makes no difference. Have Paragon NTFS installed so I can get thru to NTFS partition from OS X. I badly need Windows too and don't wanna slow it down by running it in Parallels or VMWare Fusion. A little help?
Thanks a lot!Solved! Here's what worked for me, it's located at:
http://discussions.apple.com/thread.jspa?messageID=11567814#11567814
(scroll further down, Option 3, you'll see one or two others had success with it too)
Message was edited by: rapture_elk -
Windows Boots to Black Screen w/Blinking white cursor, and then...
I installed a new OCZ sata II SSD in my iMac 27' mid-2010. I bought the cables and pressure wall from an AASP, so it's all Apple in there except for the OCZ drive. The 2TB internal drive (factory) is in there, too.
Installed SL to the SSD and updated to 10.6.8 and man, does this machine fly now!
So I used Boot Camp to create a windows partition, 40GB on the SSD, then went through the WIndows 7 install process. My WIndows disc is a retail copy - totally legit.
So the installer finishes, and I used the disc that came with the iMac to install the Boot Camp drivers (vs 3.1)
Then Windows restarts and - fail
Black screen with blinking white cursor. Tried the command fixes to the MBR - no joy.
Here is the weird thing: if I put the Windows installer in the optical drive, then boot to the Startup Disk Manager (holding down option at power up) I can select the installer dvd, and when the prompt comes up "Press any key to boot from CD/DVD" if I just leave it for a moment, the operating system boots from the SSD.
Weird. But, thats what I've been doing as a workaround. That and using Fusion to reach over to the Boot Camp partition and run it as a virtual machine (which works just fine).
Anybody know how to fix this?
Thanks!
JasonI FOUND My answer.
I opened the iMac back up and swapped the SATA data cables so that the cable designated for the factory installed internal HD led to my self-installed SSD - now it works as it should.
No errors on the internal HD either.
I beleive that EFI looks for the Windows MBR to be on the 1st drive bay. If I had modified my system by patching the MBR or EFI somehow I guess I could have got it to work, but as it is the cables reached and all is well.
As an aside, I came to this deduction when I removed the internal HD from the iMac and tried to boot from the SSD WIN7 partition and still could not. Then I took the same SSD out and popped it into my MBPro and it worked. My guess was that somehow the presence of another internal HD of any kind was confusing the boot loader, but I now believe it is the drive bay designation.
Hope this helps someone else who has added a SSD to their single drive iMac mid-2010 -
How come when I try to open an app on my phone does the screen just blink and the app not open?
How come when I try to open an app on my phone does the screen just blink and the app not open?
Some apps crash. If they do, try this, in order.
1. Double click your home button and put your finger on any app and hold for a second. Then delete that app. You're not deleting the app from your phone, so don't worry. Then try opening the app again.
2. If that doesn't work, hold your sleep+home buttons for 10 seconds and don't let go. Ignore the power off message. Then try again.
3. If that doesn't work, delete the app and re-download it. (This will work most of the time)
4. If that doesn't work, download the app on iTunes on your computer and sync it from there.
5. If that doesn't work, wait for an update by the developers. -
Why does my screen keep blinking at me? (among other things)
I have a macbook pro from 2009 and a few months ago the screen began to flicker. It wasn't too often at first, but it's gotten worse as the months go by. It's like my screen is blinking at me, it goes completely black for a fraction of a second before going right back to normal. The blinks seem to be random, with no real pattern aside from happening in clumps. It won’t happen for a while, and then within a minute there will be anywhere from like 3-10, and then it’ll go a while longer without happening (usually no longer than 30 minutes, tops) It happens when i'm using it, or it could happen when i'm across the room not even touching it.
A few months ago, whenever i turned on my computer or woke it up from sleep mode, it was making these aweful winding noises like it was trying to read a disc or something but failing miserably at it. It lasted about a week and a half, stopped doing, did it once more for a few days, then stopped again. I haven't heard from it since but i feel like it's not gone entierly :/ so... like a genius, i ignored it.
On top of that, my Safari seems to be failing and quitting out of itself more than it used to and it seems as though when i run videos off of somewhere like youtube, they have a certain lag they never had before (like, playing for 10 seconds, lagging for 2, then playing for 10 more) I don’t know if these problems are related or not, but I thought I’d mention it.
I’d drop it off at an Apple store for fixing, but the problem is i need my laptop for my internship and am not able to go without it for more than a week... So, can anybody tell me if they have any idea what the problem is, or how long it could take to possibly fix? Thanks.It eventually just all goes black after a while, although this is fixed quickly by pressing space bar. I still need a fix
-
Why my screen is blinking just before launching the form?
Hello
I am developing an Adobe interactive form from LiveCycle designer from Webdynpro ABAP.
I wrote some very very simple validation Java Script at the form fields level at INITIALIZATION event, fine.
When i am launching the form in the browser (i mean, TESTing the webdynpro application in SE80), am getting couple of BLINKING popups.......at the same time, the screen also BLINKING.........finally, the form is launching!!
Why am getting BLINKING (popups, laptop screen) just before launcing the form on the screen/browser? Any mistakes in Java Script? When i did/click CHECK SYNTAX button, i did not see any red issues(except couple of warning).
Thank youHello Srinivas,
Even I see this on my screen several times. This might be because of any javascript error resulted from your script.
To see this dialog box, you should enable your javascript debugger. Open Adobe Reader,got menu, Edit -> Preferences, click the javascript tab on the left hand
side.
Now on the right hand side,
In Javascript section -- check Enable Acrobat Javascript.
In Javascript debugger section -- check the button Show console on errors and messages.
This should help you in displaying the javascript debugger. If you still dont see the debugger,
put some syntax errors temporarily in your form initialize event javascript, try to open the form using adobe reader.
If it still doesn't show, Use Ctrl - J to show the debugger.
Regards,
kc -
My iphone 4s screen is blinking Help!!
it just started now after i reset my phone i notice that the sides of my screen is blinking i did rebooting it but its still flickering
i dont know what to do , am on panic seriously , i just bought it this april 24 it means it is still covered by the warranty .
Help me what am i suppose to do?Hey Gio Angelino,
Thanks for the question. I understand that you are experiencing a potential hardware issue with your device. You’ve done some great troubleshooting so far. The next step would be to restore your device with iTunes to completely isolate the issue.
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
If the issue persists after a restore, your iPhone may need to be serviced. The following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
iPhone Repair and Service - Apple Support
http://www.apple.com/support/iphone/repair/
Thanks,
Matt M. -
My screen is blinking since latest upgrade?
What causes screen to blink or flash? This started after latest upgrade. How can it be fixed?
OK, well that isn't very definitive. However you can try some basic resets like doing a PRAM reset and SMC resets. If you don't know how to do these then please click:
https://discussions.apple.com/docs/DOC-3603
You may need to do each up to 2-3 times for them to work. -
I have bought new macbook pro 13.3" i5 2.5 dual core. I was working fine but suddenly when i restarted my macbook after a shutdown its screen started blinking or scattering type. But before shutdown it was working very fine, dont know what happened to it. Please help me out.
Try running the Apple Hardware test to see if it picks anything up:
http://support.apple.com/kb/PH11342
You can also try starting in the safe mode to see if the condition is the same. Booting in this mode takes a long time to start:
http://support.apple.com/kb/HT1455 -
Please help me to resolve a problem with my iPod touch. It has horizontal line at the bottom of the screen and screen starts blinking after 3 minutes of use. It's so frustrating as I bought just 4 months ago and didn't even think tha apple products have such defects.
All electical producs have defects. Apple products are not immune.
To rule out a software problem try:
- A reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
- If still problem make an appointment at the Genius Bar of an Apple store. If the iPod is defective you will walk out with a replacment. -
Please help, my iMac crashed when i open safari and my screen was blinking, then blackout and force to restart. Why is this happening? This is the crash report from my iMac.
Anonymous UUID: 0CC51978-99A7-1665-7EFF-A04BF2E05D6E
Sun Aug 3 20:45:04 2014
panic(cpu 0 caller 0xffffff80100dc24e): Kernel trap at 0xffffff801005248e, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00007fff73cf3638, CR3: 0x000000000952f04e, CR4: 0x00000000000606e0
RAX: 0xffb9b9b9ffbbbbbb, RBX: 0xffffff801c66d3c0, RCX: 0x0000000000000030, RDX: 0xffffff801c66d418
RSP: 0xffffff80abb23c80, RBP: 0xffffff80abb23cd0, RSI: 0x0000000000000001, RDI: 0xffffff801c66d3c0
R8: 0x0000000000000001, R9: 0xffffff8010601910, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
R12: 0x0000000000000000, R13: 0xffffff801cff60d8, R14: 0xffffff801c9fefd8, R15: 0x0000000000000000
RFL: 0x0000000000010287, RIP: 0xffffff801005248e, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00007fff73cf3638, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8084698c50 : 0xffffff8010022f79
0xffffff8084698cd0 : 0xffffff80100dc24e
0xffffff8084698ea0 : 0xffffff80100f3746
0xffffff8084698ec0 : 0xffffff801005248e
0xffffff80abb23cd0 : 0xffffff8010051dc9
0xffffff80abb23dd0 : 0xffffff7f909ef726
0xffffff80abb23e50 : 0xffffff7f909ef15c
0xffffff80abb23ed0 : 0xffffff7f909eee0b
0xffffff80abb23f20 : 0xffffff80104353b5
0xffffff80abb23f50 : 0xffffff8010440a33
0xffffff80abb23fb0 : 0xffffff80100f3f46
Kernel Extensions in backtrace:
com.apple.kec.pthread(1.0)[882075E6-12C4-3225-8750-928715183739]@0xffffff7f909e a000->0xffffff7f909f4fff
BSD process name corresponding to current thread: ReportCrash
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide: 0x000000000fe00000
Kernel text base: 0xffffff8010000000
System model name: iMac12,2 (Mac-942B59F58194171B)Both Memory Clean and Clean My Mac could have cause the damage which triggered the kp.
I would back up your Mac, erase and reinstall. Then Migrate your user data from the backup.
Uninstalling Tuxera is a troubleshooting process. You don't have to keep it uinstalled, just long enough to test to see if it is causing the problems.
However, if it doesn't happen regularly, it would be hard to determine if it was the cause. And, as I mentioned, I don't think it would be the cause. -
Screen is blinking to black all of the time, it comes back but is constantly going black
I downloaded the updated firefox. since then the screen is blinking to black screen. At first, only every now and then, now all the time.
Are your Mission Control keyboard shortcuts being accidently pressed? Go to the System Preferences in the Apple menu to ensure you aren't pressing keyboard or trackpad shortcuts you aren't aware of.
-
My apple TV displays an apple screen, and blinking white LED, only LED responds to remote inputs. I reset with remote ...same result....Any ideas?
If they are the instructions I think you might have seen, they are for the Apple TV 2.
Unfortunately I think your Apple TV may have failed.
You might try removing ALL the cables for a while and trying again, but I think you may be out of luck.
Maybe you are looking for
-
Error : While transporting hedge management in T.Code TEM20
Hi Guys, I'm getting runtime error that is " Express document "Update was terminated" received from author "User Name". while tranfering the data to hedge management using the Transaction code TEM20. Error : Short text The ABAP/4 Open SQL ar
-
My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?
-
3rd party WSDL open in Internet explorer but why PI WSDL not opening
Hi Experts, My scenario is synchronous Webservice from soap to proxy . http://110.234.207.11:55000/XISOAPAdapter/MessageServlet?senderParty=&senderService=GIS_PID&receiverParty=&receiverService=&interface=MI_TechnicalLossIn_OB&interfaceNamespace=http
-
Hello, I want to test Project Pro for Office 365 on my Win7 PC where MS Office 2013 64 bits is already installed. When I start from "Your Office on Request": I get the error: An issue occurred. Sorry... We cannot install Office (32 bits), because th
-
when i try to create a panorama pic. in Ps. i got this message : Error 8: Syntax error. Line: 132 -> args.putEnumerated( keyMode٬ typeBlendMode, enumDarken ); everything with last updated the OS , Java , and PS version . any help pls