My screen is on and I can see calls and texts coming in but I cannot use touchscreen.  It is frozen and won't move. What can I do?

My iPhone is on and I can see calls and texts coming in but I cannot use the touch screen. It is frozen. What can I do?

Basics from the manual are restart, reset, restore.
Have you tired all three of these options?
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Similar Messages

  • Extended router's network for Airport extreme. Works well with MacbookPro. I can print with notebook with XP SP3 and, I can see the USB-harddisc in the Airport service program but, I cannot use it. I have set filesharing etc. What do I do wrong?

    I connected the Airport Extreme wireless to the existing network of my router. At the Airport there is connected via USB a Printer and three hard discs. All works well on my MacBook Pro - I can print and use the hard discs. On my notebook and my desktop, both with XP-SP3 I can use the printer only. In the Airport service program - manual set up - hard discs I can see the drives with the correct names but I cannot work with it. I don't find neithe the Airport Extreme nor the drives in the Windows Explorer. Of course I've set 'filesharing' etc. What do I do wrong? Where is the mistake in the set up?

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • HELP. I see notifications for text coming in, but ...

    HELP. I see iOS Skype notifications for text coming into my phone, but I see NO incoming text INSIDE Skype for iPhone
    I can type TO the person, and she sees it fine, but her replies never appear IN the skype app.

    Hi,
    I was having issues like that. Go through your sound settings and make sure that you have not set the same sound for something else. Also if you had dropped your phone at some point, it sometimes does its own little thing. Mine did that last time. Also sometimes texts get backed up in your phone comapnies server and sometimes it gets confused and resends things and once it finds out it already was delivered it doesn't show anything new.
    But go throgh your setting.
    Have you ever dropped the phone? Becuase they may be contributing to it.

  • My ipad air2 screen is black and won't come on. I can hear siri but she says she cant work right now. What do I do?

    My ipad air2 screen is black and won't come on. I can hear siri but she says she cant work right now. What do I do?

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • Is there any way to recover files when the back up catalog has been deleted accidently.  I can see a preview of the photos, but I cannot access or edit them.  They say "the folder cannot be located" and "the photo is missing".  I have gone through multipl

    I can see a preview of the photos, but I cannot access or edit them.  They say "the folder cannot be located" and "the photo is missing".  I have gone through multiple Adobe tutorials to try and recover them to no avail.  Any tips?

    Backup catalogs wouldn't have helped with this problem anyway, but naturally, you shouldn't delete backup catalogs for a while.
    The solution to reconnecting the folders is given here: Adobe Lightroom - Find moved or missing files and folders

  • My screen got bigger and when I move the mouse, the screen moves as well. What can I do about this?

    My screen got bigger and when I move the mouse, the screen moves as well. What can I do about this?

    Actually as Roam said, you can keypress, Option + command + 8
    But i think wat you asking is that you dont want the screen mving when you move the mouse. Right?
    For that you can, goto, System Preference -> Accessibility -> Zoom -> More Options...
    Once you click more option, you'll get a window. Look at the bottom of the window for 3 options with bullet buttons. SELECT "ONLY WHEN THE POINTER REACHES AN EDGE" and click "DONE"
    Viola!!! You're troubl's are over!!!

  • My screen is black and won't open up

    my screen is blank and won't open- i can't type my password, get messages, or answer a call.

    Have you tried pressing and hold the Power and Home button until the Apple logo appears?

  • I can see my Airplay device in iTunes, but I cannot see it in Sound Output list. How to fix it?

    I have Bang&Olufsen Beoplay A9 and using it with my mac air OS X 10.7.5
    my problem is I can see my Airplay device in iTunes, but I cannot see it when I go to System Preferences > Sound > Output and because of that when I play a song from youtube, sound comes from my laptop. How can I fix it? thanks in advance

    Hello there sjbrosjbro,
    It sounds like you are not able to print to your printer because it keeps timing out when you try. I would use the troubleshooting steps from the following article to help you get that printer going again. It may be something as simple as re adding the printer if you've already restarted both the printer and the computer already:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    USB printers and Bonjour-enabled network printers
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • My iphone's screen has enlarged and it's disabled. what do i do?

    my iphone's screen has enlarged and its disabled. What do i do?

    Did you try double tapping with three fingers? Your screen should go back to normal after that.
    If this does not work, connect in recovery mode to restore:
    If you can't update or restore your iOS device

  • My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    Hello Nadersalah,
    It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    iPhone Repair and Service - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • HT5622 How can i use the facetime, its appearing in the screen but i cannot use it...

    How can i use the facetime, its appearing in the screen but i cannot use it.

    http://support.apple.com/kb/ht4319

  • Macbook Pro suddenly shuts off. screen goes black and won't turn off till after a few hours.

    Hi everyone!
    So I've had this problem from my macbook since months ago. It sometimes just shuts off by itself, the screen turning black and won't turn on until like after a few hours (sometimes a day, but sometimes you could also immediately open it just like that.)
    When it shuts off and you plug the adapter it is still charging, the lights on the side of the macbook book still lights up just fine if you press the button on the side. the only problem is that it wont open until after a few minutes, hours or days (very unpredictable) (also tapping the macbook helps, I dont know if it "really" helps or not, but it works sometimes.) But when it open it will be working fine until another couple of weeks or 3 or a month (again unpredictable)
    I dont know what's wrong with my laptop, please help me. It would be greatly appreciated! thank you so much in advance!

    Hold the power button down for 10+ seconds.  Then bring the MBP to an Apple store for an evaluation.
    Ciao.

  • MacBook screen goes gray and won't wake up from sleep - 10.6.2

    We have a MacBook Alum running 10.6.2 with 4gb ram.
    We recently upgraded to 10.6.2 from Leopard and this issue started to happen.
    It seems that as the MacBook goes to sleep or goes to the screensaver mode, the screen goes gray and won't wake up from sleep or screensaver mode without a hard reboot.
    Is Apple aware of this issue? It did not happen with the previous version of Leopard. This issue arrived when we upgraded to Snow Leopard. Other than the sleep issue, SL is rock solid. Kudos to Apple for producing a great OS!

    Hi GrooveDaddy,
    Have you contacted AppleCare via telephone to make them aware of this issue? It definitely doesn't sound like normal behavior. What sort of troubleshooting have you done so far on the issue? What sort of settings do you have on your screen saver? Password protected? Custom iPhoto slideshow?
    What if you manually sleep the machine by closing the lid or engaging it via software (via the Apple menu) does the screen have the issue in both scenarios?

  • My iPhone screen went black and won't turn back on.

    Yesterday, my iPhone 4S screen went black and won't turn back on. So I tried just letting charge but after an hour nothing happened, so then I switched out the chargers and made sure the outlet I was using worked. But it still was black. Then I did a little research and I tried to put it into DFU mode but my power button has been broken for a few months now, so that didn;t work either. Then I tried restoring it, but my computer didn't recognize it!!! So then over night I let it rest with no power source connected to it. This morning I plugged it back into a power source and it showed the charging icon. I'm pretty that means it's still running, but I'm not an expert. PLEASE HELP!

    If you have got a different USB Sync cable try to charge your iPhone with that as there are possibilities that your current USB cable or Power Adapter is not Charging your iPhone. If it still doesn't work make an appointment to Nearest Apple Genius Bar

  • Hi, i tried to update my iphone 5s and now the only that shows me in screen is to plugged in with itunes. I am opening itunes but it does not installed with it or regognized it ... what i must to do ?

    hi, i tried to update my iphone 5s and now the only that shows me in screen is to plugged in with itunes. I am opening itunes but it does not installed with it or regognized it ... what i must to do ?

    Read this
    http://support.apple.com/kb/HT1808?viewlocale=en_US

Maybe you are looking for

  • Can not install powerdvd10 on B540 which was uninstall accidently

    Can not install powerdvd10 on B540 which was uninstall accidently. When I try to install from downloaded exe. file  there was error message "This software can only be installed on a lenovo system"

  • Add attribute to standard objectclass

    Hi, is it possible to add user defined attributes to an standard objectclass in iPlanet Directory Server 5.0 ? I've created an attribute using ldapmodify and than I tried to add this attribute to the objectclass inetorgprerson using ldapmodify. First

  • How to enable 2 phase commit in oracle11g(for distributed oracle databases)

    Hi All, We have three oracle servers(11g) and we need to update the data from one server to remaining servers. Want to know, is "two phase commit" automaticly enabled/installed in 11g or we need to enable it. If we need to enable it then what are the

  • Flattened and Cloned, Edits Not Saved

    I flattened an image and made a duplicate layer to clone on, which I was able to do. Though after flattening are layers really possible? Then I did some more cloning without making  a duplicate layer. When I saved the image-- I also get the Replace o

  • Envy 20 Side USB Drives Won't Read

    I have a Envy 20 and the side USB drives have stopped working. I plugged in a flash drive loaded with a file and it will not recognize the drive. The rear drives still work, but are difficult to access. Any suggestions?