My screen keeps going blank still have sound

my screen keeps going blank but still have sound

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

My iPad keeps locking itself every few seconds, any ideas how to fix it... Drives me mad having to put my pass code in all the time and the screen keeps going blank :( HELP!

My iPad keeps locking itself every few seconds, any ideas how to fix it... Drives me crazy as the screen keeps going blank and I have to constantly put in my pass code every few seconds. Can someone help me out please. The pass code lock is set at 10 minutes but it's happening every few seconds :(

I've run into the issue and it seems to be related to an app not fully supporting the iOS you're on, the reboot doesn't usually solve it.
I've solved it in the following manner(s):
1) Backup the device to iCloud, then erase the iPad (Content and Network Settings).
2) Setup the iPad and choose to restore from iTunes/iCloud Backup (wherever you backed it up)
3) Perform any software updates
I have not tried simply performing the software updates (which may fix it, but if it doesn't you won't be able to perform the above steps).
Enjoy.

IPhone screen keeps going blank

My iPhone screen keeps going blank. If I reset the phone, it comes back on but after a while, it goes blank again. I don't know what to do?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

My Mac book air screen keeps going blank

Recently my Mac book started giving me a blank screen when I turn it on. The desktop will occasionally flash on but as soon as I hit the mousepad it goes blank again. Any ideas?

Hi ...
Try here > Troubleshooting: My computer won't turn on

My computer screen keeps going blank and then going back to the box where I put my password in to start my comp. Why is this happening?

My computer (Macbook) was working fine this am. I left it for an hour and then came back and the screen was black (always does that as the screensaver hardly ever works). I moved the mouse to wake it up and everything was normal. I went to adjust the volume and the screen went blank and the main page with the box where I put my password in when I first start my comp appeared. I put my password in and everything was normal again. I opened a window in Safari and before it loaded completely the same thing happened, the screen went blank and went back to the password box. Does anyone know why this is happening? I don't have an external hard drive or any blank flash drives so I can't back anything up right now and am afraid I'm going to lose everything. Thank you

Sounds like hardware failure, called boot loop. Call Apple and or go on apple.com and make Genius Bar appointment to have your iphone reviewed by a Tech. Provided you iphone shows no physical or liquid damage they will take care of you, or if you have Apple Care Plus
Genius Bar Rerservation : http://www.apple.com/retail/geniusbar/

My iMac 27inch screen keeps going black but everything is still running in the background? please help

My iMac 27inch screen keeps going black but everything is still running in the background? please help. I have read that apple are recalling 27inch iMacs....

Hello @DesCherryBomb,
I understand that you are having issues with your HP 2310m monitor going blank and/or flickering. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

T41 screen suddenly goes blank - possible overheating?

Having an intermittant problem with my T41, and wondering if anyone has any idea as to the cause.
Most of the time, I use it in a docking station. Sometimes, after I've been using it for a while, the screen suddenly goes blank. There's still hard drive activity, as the light keeps on flashing, but the screen stays blank no matter what I do. The only way out is to do a hard reboot via the power button and, when I switch it back on again, the screen comes back, but usually some of the desktop icons have changed places. One time, the screen resolution had also been reduced to 800x600, and I had to reset it back to 1024x768.
I have noticed recently that, when it does this little screen shutdown trick, the fan doesn't seem to be operating and, if I remove the computer from the docking station, it does seem a bit warm underneath. Then, when I reboot the computer, the fan kicks in right away and seems to be pushing a lot of heat out of the vent in the side.
So does anyone know if this is an overheating issue caused by the fan not kicking in when it should, or could there be another cause? One thing that has me confused is that, according to the Windows fault reporting system, it says its a video driver fault and I should update the driver. So can anyone tell me just what the problem really is?
Edit:
I've been able to find one of the manuals as a PDF, and it seems like the computer is unexpectedly hibernating due to the CPU overheating. Unfortunately, that's all it says, and doesn't give any advice as to how to fix the problem. Does that sound like a correct diagnosis?
Solved!
Go to Solution.

Don't know why this topic has been marked as "solved" when it's still an ongoing problem - I certainly didn't mark it as such!
Installed the program you suggested, and ran a few tests. From those, it looks like the issue could be the CPU, not the GPU, that's been overheating and causing the hibernation. With the computer just idling, the CPU temperature reports about 35-38 degrees C, while the GPU sits around the 40-44 degrees C mark. Playing a HD flash video, the GPU temperature went up to around 50 degrees C, while the CPU went up to 69 degrees C. At that point, the fan hadn't kicked in, so I switched from Smart to Manual mode, at which point it started in Mode 7 and brought the CPU temperature back down.
I then ran the test again a few more times with different videos and, with Smart mode selected again, the fan did kick in automatically at around 66 degrees C on the CPU temperature, but only in Mode 1. This seem to just stabilise the temperature, not bring it down, and I had to go to Manual mode to get a higher fan speed.
Before I installed the fan control program, I don't think the fan was kicking in at all, as there was no sign of air coming out of the vent. The only time the fan did kick in was after the reboots, and then only for a minute or so. The program seems to show that both the CPU temperature sensor and the fan are working OK, but it appears that they aren't talking to each other properly. Any ideas why this could be?

Please Help...why does my screen keep going to black in fcp?

I have just brought imac g5 (older version through private sale) and completed a beginners fcp course. When and got a lacie 250 , shot some stuff which I managed to capture! Then just tried to open project and now the screen keeps going to full black and I don,t know what to do! I would like to do a full system check and make sure all settings correct and to know why screen blacking out. I am very new to mac and don;t feel that at home with settings etc . Any advice would be very welcome and appreciated as I just want to practise now but I am stumped at the first hurdle!
ta
ali

New Discussions ResponsesThe new system for discussions asks that you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts. When you mark a post with the tag, it will also mark the thread as Answered. If you receive the solution or answer to your question outside of the thread, then, and only then, at the top of the thread, mark the thread as Answered. This will mark the thread as Answered without marking an individual post as .
If we use the forums properly they will work well...

Wht does my computer screen keeps going dark?

Why does my computer screen keep going dark?

Good. This means that, in your existing account, a setting is bad or .plist file is corrupt. As identifying the rascal may take time, my suggestion is to move data to the new account, must be with administrative privileges. As the contents of each account is unavailable to the other, there are two methods:
- if you have a backup on an external disk, as you should (if not, consider this seriously, do not count on good behavior of hard disks), make a last backup on the existing account, and restore in the other account; when ready, delete the old (buggy) account
- if not, save your settings unto a flash drive; this is a limited backup just to avoid putting back settings for Mail etc. I am satisfied with iBackup (grapefruit.ch), but there are other backup utilitites, Time Machine, for example; TM does not allow limited backup, it works if you have a large external disk. If backup disk is not available, move files to shared folder, which is visibile from both accounts, and from there to the new account.
May seem difficult, in fact it is not. You must just move data from one account to another. Now, take care to new apps you install or new functions you activate. When you notice something strange, that may be the cause of this behavior.

My curve 8900 screen keep going white

in need of some help my curve screen keeps going white after turning it on sum time it come on ok for about 10mins then it locksup and go white again will try any thing to sort it

curtismartin50,
We from what you have described there seems to be an issue with the software on the phone or the phone itself. You can try to address the software by following these steps below:
1) Have you performed a hard reset, by pulling the battery out and waiting 2-3 minutes before rebooting when you place the battery back in?
2) You may want to try upgrading the device software by downloading BlackBerry Device Software fro blackberry.com
3) Have you performed a full "Wipe" on your BlackBerry Smartphone, you can do this by going to "Options" > "Security Options" > "General Settings" and press your Menu Key to choose "Wipe Handheld"
Note that this will delete all data on your device and restore the unit back to factory defualts!
Hope this helps
Office2Mobile
Poor Service and the Worst Support provided by VarDynamics http://vardynamics.com/

Preventing iPod touch screen from going blank when iPod's powered.

Hi there, is there anyway (or app) to prevent the iPod touch's screen from going blank/turning off?
This is why I ask...
I often use my iPod touch as my remote, where I choose which of my iMac's iTunes songs to play next and besides I'm always revising/updating the songs' ratings. My iPod has a password to unlock and so, doing what I just said often can be bothersome. I've found out that, if the iPod's own music is playing when connected to the power, the screen never goes blank, it only dims, which is very helpful but, since I'm not listening to the iPod, I always have to turn the iPod's volume all the way down. Also this increments the number of plays to all those songs played back which is something I don't like either and so, again my question is, does anybody know if there is any way or app that, when the iPod's connected to power, only dimmed the screen (but not allow it to go blank)?
Hope you can help.
Thanks.
Jorge...

Go to Settings>General>Auto-Lock and set time to never. If you have a corporate exchange mail account on the iPod that may prevent using never (Never not present).

MacBook Pro screen keeps going odd colours

My Mid 2009 MBP's screen keeps going a single colour full screen. It has happened several times. I have attached an image to show what happens.
I have tried to replecate it, but the first time it happened I was tying. The second time (turned grey) I moved the MacBook and the third time (burnt orange) I moved the display. I have since tried shaking the laptop, and moving the screen, but nothing.
Is this a common thing?

I don't know how much you're willing to spend to get a 'like-new' notebook, but you may want to take the machine into one of your local Apple Stores and ask about Apple's flat rate repair pricing. I don't know that it's available worldwide, but at least it's worth asking about.
Clinton

Toshiba satellite p205-s7438 blank screen issue goes blank non responsive as well

Satellite: P205D-S7438 is the computer i have bios version 1.7 and mine runs vista home premium it runs fine then the screen just goes blank backlit and non responsive sometimes on the web other times after going to sleep have tried everything does this only on ac power battery works with no issue when it loses charge plug back in goes blank after so long and then have to power off with power button boots back up on battery at times will not boot from just ac adapter very intermittent issue ran mem test all passed hard drive passed tests as well changed inverter but have the same issue any ideas?

I've got exactly the same problem on my P205D-S7438, running Vista Home. It is happening more frequently. Someone at Toshiba must know about this. What is wrong with my computer?

Lenovo z50 screen keeps going black

I've had it for around 6 months with no problems, then in the last 48 hours, the screen keeps going black when I'm using it. It happens every 20-30 minutes. If I close the laptop lid and open it again, it works fine until the problem comes up again. I've tried downloading updates and placing a fan by it, but it keeps happening. Any ideas?

jacob51 wrote:
I've had it for around 6 months with no problems, then in the last 48 hours, the screen keeps going black when I'm using it. It happens every 20-30 minutes. If I close the laptop lid and open it again, it works fine until the problem comes up again. I've tried downloading updates and placing a fan by it, but it keeps happening. Any ideas?Try installing the video driver and energy management program.

I dropped my ipod in coke. The screen keeps going black. Is there anything i can do?

i dropped my ipod in coke. The screen keeps going black. Is there anything i can do?

Your iPod is toast. No amount of dry rice is gonna help.
"Coke" and other carbonated drinks are acidic (carbonic acid), not to mention loaded with sugars and other nastiness.
The acid will "eat" metals, like the lead and tin in solder, most liquids will wreak havoc with the LCD display, and since "Coke" and its cousins are acidic, they are also good electrolytes and will conduct electricity.
You can try filing a claim against your home owner's insurace, but barring that, you're out of luck.

My screen keeps going blank still have sound

Similar Messages

Maybe you are looking for