My screen looks like a green mesh has been placed over it. It is nearly illegible and comes and goes.

my screen looks like a green mesh has been placed over it. It is nearly illegible and comes and goes. Nothing I do can remove it.  Does anyone have a remedy?

You have a hardware problem and the only people/place that can fix that is an Apple store or AARP.
So take it into your nearest Apple store or AARP.

Similar Messages

  • I bought my iPhone on Friday and when I tried to use it to make a           call the screen had turned green - as if a green filter had been placed over it.  When I turned the phone sideways the color turned to magenta. Anyone else have this problem?

    I bought my iPhone on Friday and when I tried to use it to make a call (after I had left the store)  the screen had turned green - as if a green filter had been placed over it.  When I turned the phone sideways the color turned to magenta. Anyone else have this problem? I plan on exchanging the phone but can't get there until later this week.

    Next time you post here, you might think about using a title and the provide your description below.

  • I blocked quite a few different phone numbers awhile ago but when I looked at the blocked numbers today it looks like the same number has been blocked multiple times.  Does anyone know why that is?

    I blocked a lot of different numbers awhile ago but when I checked the blocked numbers today it looked like the same numbers were blocked multiple times.  So for example if I blocked phone numbers 555-555-5555, 555-555-5556, and 555-555-5557 on different days it looks like only 555-555-5555 has been blocked 3 different times and I no longer see phone numbers 555-555-5556 or 555-555-5557.  Does anyone know why?

    Oh dear, one of those phantom disconnections. You know they are actually so common BT have a specialist department that deals with them. I think they are called Priority Back in Service, there is no actual phone number you can ring them on, you have to call 150 as normal and the customer service team are supposed to raise the issue with them to sort out.
    You could contact that Mods but they sometimes take 3 days to reply, especially with it being the weekend.

  • HT1353 im trying to download games on to the ipod touch 2nd gen and looks like the software driver has been removed,what does that mean and how do i sort it?

    i have an iod touch and aparently the software driver has been removed and i had it restored to factory settings as i bought it from someone,what does this mean and how do i solve the problem

    Just what error message are you getting?
    Are you trying to redownload them directly to the iPod?
    If you are getting an error message that included Open GL 2 or similar that means that the app requires that but only the 3G and later iPods support that.

  • IPod 4th gen has lots of lines over screen looks like bar codes and can't see display?

    My step sons iPod I just a year old but for about 3 months it's been coming up with lots of lines on screen looks like bar code. Now he can't see anything on screen due to his. He has not been on it for a while as he has a 2nd one from his mum but I forgot to check this out before warranty ran out.
    I have tried system re boot, I thought it was due to him charging it with USB on xbox360.
    Can someone please help

    - Try restoring the iPod from backup.
    - If not successful then restore to factory defaults/new iPod
    - If still problem time for an appointment at the Genius Bar of an Apple store.

  • Screen looks like it is too big to fit ipad 1

    Screen looks like it is too big to fit ipad 1. Can only see part of the perimeter, icons along edge are showing 20%. Running the latest software update, it has been sycned and rebooted. Whats next?

    It's in the General>Accessibility page in settings.  If on, you may have double-tapped with three fingers, as James suggests.  If you don't want this feature, turn it off.

  • After burned to dvd the edge are cut off in my tv screen. looks like zoomed

    hi
    i am FCPX user. i create my project using format (resolution )as showed on the pic below
    after burned to dvd the edge are cut off on my tv screen. looks like zoomed as showed in  the pic below.
    thanks for taking ur time to help me!!
    then i export using master file as
    showed on pic below
    and after i burn on to dvd my edge are cut off. here pic trying to show before burn on my mac and after burned on to dvd
                                           before burned on to dvd on my iMac screen
                      AFTER BURNED ON TO DVD ON MY TV SCREEN
    i really need ur help thanks
    after burned to dvd the edge are cut off in my tv screen. looks like zoomed

    Thanks Alchroma
    i used this dvd burner just incase..
    but i thought i might have wrong settings from begning.
    do u thinik this setting is alright when creating DVD
    Alchroma wrote:
    That thought jumped into my head as well.
    If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
    Al
    Alchroma wrote:
    That thought jumped into my head as well.
    If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
    Al
    thanks again

  • Qosmio F10: Monitor screen looks like an Andy Warhol picture

    I am currently having problems with my monitor screen looking like an Andy Warhol picture. I have resorted to going through the Product Recovery DVD-ROM for my Qosmio F10/G10 Laptop in the hope that reverting it back to the factory settings would solve the problem but it hasn't.
    The screen breaks down after the Windows welcome screen, leaving me with my desktop all Andy Warhol like (i.e. blocks of pixilated colour at the edges of the graphics). I have tried to reset the resolution which solves the problem to an almost acceptable level but on a temporary basis, because the problem re-appears again when I re-boot the laptop.
    I think that it is something to do with the Windows Multimedia Operating system that was preinstalled on my computer (so no recovery disc). The reasoning behind this assumption is that I put a DVD film into the Multimedia that is part of Windows XP and the film is a moving Andy Warhol video.
    I put the same DVD into the WinDVD that came as a Toshiba additional content and the DVD is perfect! My reasoning is, that if there was something wrong with the hardware of the Laptop, then all DVD reading programs would react the same way, but as they do not, it must be a programming (or operating system problem).
    Am I on the right lines? Is there a way to solve the problem via a downloadable file?

    Thanks guys for your replies, sorry if my question is confusing, but I couldn't think of any other way of describing it without the use of a screen dump to show you.
    At the moment I haven't got another monitor to try, even though this looks as though it would have been the easiest option. I shall start asking round to see if I can borrow one to eliminate that variable.
    However I will try to reinstall and to update "Graphic Drivers" to get rid out of this display problem.
    Thanks to all.

  • HP mini 210-2145DX screen looks like a negative and i cant restore it

    my laptops screen looks like a picture negative. can anyone help me fix this problem

    Hi veekey4. Let me know if the display looks the same in Safe Mode: Start your computer in safe mode
    If it does look the same in safe mode, try a hard reset, as outlined in this document: Performing a Hard Reset or Forced Reset
    If that does not resolve the issue, try restoring your BIOS: Restoring the BIOS
    Let me know if this helps.
    If those steps do not resolve the issue, it is likely a hardware failure. In that case you can contact HP Support to find out your repair options. HP technical support: 800-474-6836. If you live outside the US/Canada Region please click the link <HERE> to get the support number for your region.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • I downloaded from iTunes a hd movie for the first time. What a disaster !                                                Keep stopping and looks like after 2 days has not been downloaded. What am I suppose to do? Can I get my money back? How?

    I downloaded from iTunes a hd movie for the first time. What a disaster ! Keep stopping and looks like after 2 days has not been downloaded. What am I suppose to do? Can I get my money back? How?

    Contact iTunes suport... http://www.apple.com/support/itunes/contact/
    It sounds like you might have a slow wifi internet connection?  How fast is it with a speed test from your iPad.

  • HT1338 There's green mark has been shown on the left side of the screen on and off . How can I solve this problem ? Please.

    There's green mark has been shown on the left side of the screen on and off . How can I solve this problem ? Please.

    iMac (27-inch Mid 2011), Mac OS 8.6 or Earlier
    Not possible.  Which OS is currently installed on your iMac? 
    If your iMac came w/DVDs when you originally purchased it, run the Apple Hardware Test and post back the results. 
    If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it. 

  • Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop.

    Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop

    screen look on

  • Why does new 5s screen look like the old 4?

    We just bought and backed up two new 5s replacing iphone 4. Why does one new 5s screen look like the old 4 iphone. One phone shows new version, one is still old. I have downloaded and backed up twice, same thing happens. Used icloud to backup.

    Sure, here's two photos, LP5 is the old screen style, NP5 is the correct screen. Note the differences?

  • My baby accidentally hit my key pad and now my computer screen looks like a negative.  Does anyone know how to fix it?

    My baby accidentally hit my key pad and now my computer screen looks like a negative.  What was white is now black, etc.  Does anyone know how to fix it?

    Press control-option-command-8, or visit System Preferences -> Universal Access -> Seeing and change the display back to "black on white."

  • Iphone 6 is stuck on apple screen with loading bar. It has been like for 12 hours.

    My Iphone 6 is stuck on the opening apple screen with loading bar. It has been like this for 12 hours. I've tried resetting it by pressing the home and power button together but it keeps coming back to the same screen. What should I do?

    I've had the same problem but it's tuck on like the very last little bit and hasn't gone anywhere in 10-15 hours.

Maybe you are looking for

  • Unreasonably Slow Develop Module LR 4.3/5.3

    I was running LR 4.3 (updated version) on an iMac with OSX Mavericks w/ only 4GB of RAM but that hasn't been a problem in the past, 350GB of free space on the desktop hard drive, and 200 GB of space on the external drive where the images and catalog

  • Link in a Web Template as a Jump Target?

    Hi, I have a requirement to jump from a web template to a query using a link on the page. We're currently migrating from v3.5 to v7. In 3.5, we used javascript to build the link as follows: function openJumpTarget() {     url = SAP_BW_URL_Get();    

  • Reading data from flat file in aplication server

    hi all, can any body provide code how to read data from flat file which is in application server. thanks in advance

  • Cann´t update aperture 3.0

    hallo, I want to update Aperture Version 3.0 with original licence. But every Update 3.1.3, 3.1.1, 3.2.3 doesn´t work, the message is" the installation needs min Aperture 3.0". What can i do to start updating the Programm

  • Session history in 9i

    Hello, I know that starting 10g we can use ASH or v$active_session_history to get a list of active sessions history. Now i have 9.2.0.7.0 database, Is there a way, a script or a methode that we can use to get list of session for a specified past time