My screen no longer lights up
I just recently restored my I touch and now the screen went black.. What can i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I've noticed since the recent update that the screen on my Droid Charge no longer lights up when a text comes in. I hear the notification then I have to push the button on the side to light the screen up. Does anyone know is there is an app or somehow to get the screen to light up when I message arrives?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i just recently replaced the simcard to my personal simcard earlier. after e few hours of usage (messaging, facebook, twitter, instagram and viber) it slwoed down until it hung up. i locked the screen to see if that helps since it usually did with my ipod touch 4th gen. i tried pressing the sleep button again to find out it no longer lights up. it was still 50% charged so it can't be the battery. i connected it to the charger and it only makes the usual beeping sound when you plug the device to its charger. what should i do? i need it for work asap. and i have no back up phone or simcard.
slowed*
-
Re: Satellite 2455-S3001 - LCD no longer lights up
I have a Satellite 2455-S3001 part #PS245U-074966. The lcd no longer lights up.
I can examine the screen and see the display is working (with a flashlight I can see images on screen) . I would like to get this fixed but have never worked on display problems like this before. Previously I looked up this problem and what I gathered is that it might me a fl converter(forgive me if this isn't correct it has been over a year since I did the research).
I would like a definitive answer and not a maybe, money is tighter than it used to be.
JohnI agree with Mores. I think the FL inverter is faulty and must be exchanged.
Have a look on eBay. A friend of me bought in eBay a FL inverter for his Satellite notebook and exchanged it. After this the display worked fine.
The FL inverter is not so expensive.
Good luck! -
Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?
Everytime this happens Ihave to power down and restart! Any ideas would be appreciated!
-
How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
My iPhone 4S seems to be in visual impaired mode, and the touch screen no longer works. I have tried rebooting the phone without success. How can I get back to normal mode?
I solved my own problem by clicking the home button 3 times.
-
Alright, I'm having two annoying problems with my iPhone. It's an iPhone 4.
I'm using the latest iOS.
The first problem is that when I get a notification (a mail, text message, whatever), I hear the sound that it makes, but the screen doesn't light up. Then, when I click the home or the turn-on / off button (basically when I'm in the lock menu), it doesn't show the notification either. Yet, in the notification settings, I've set up to show them. For example mails. I just received a few mails. For mail, I've selected the banner in the notification center. But I see no banner. I see nothing in fact. I can unlock my phone and go in mail, and see the mail there.
What could be the reason for this? I've recently done some changes on it, I mean, not exactly on the iPhone, but in iTunes. I removed all photos from my iPhone (over 3000) and all songs that were on it. I decided to sync only the latest 3 months of photos and 3 months of music. I don't think it's related but it's the last thing I've done with it, and since then this has been happening, so I thought I'd mention it.
My second problem is that, while I was updating my music and photo library on my iPhone, I also synced all app updates. I have around 6 or 7 of them, lurking there for a while, and I never got the time to download them in iTunes and sync them with my iPhone. So that's what I did as well. Strangely enough, when I visit the App Store app, under Updates, it still tells me I have 5 apps to update. I remember one I updated on the iPhone itself.
They're all listed there with the little bar that shows up when it's loading, except it isn't loading. It's just stuck there, at the very beginning. No, not even at the beginning, because the blue little bar that moves forward isn't even present.The also show up this way on my iPhone "desktop" (Home), and it says "Waiting..." below them.
I've tried syncing again, and also restarting the iPhone, but it didn't help. Anyone know what's wrong here?
I appreciate all help. Cheers guysNobody? The second problem is solved! But my phone still doesn't light up or shows a banner or anything when for example a mail arrives?
-
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f -
My screen is not lighting up, Can anyone help?
Hi
I put my phone on charge yesturday, and when i checked to see if it was charged my screen wuld not light up. I havnt dropped my phone or anything. Just wondered if anyone has come accross this problem before is so how did they fix it?
ThanksIt may be related. Here are the troubleshooting articles depending on which type of computer you have:
iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X -
Glance screen no longer available?
I recently lost my nokia lumia a 822. I replaced it with the same phone. I have installed all updates and am current at this time. A feature I really loved on my last phone was the glance screen. It does not show up on the settings menu on this phone. Has it been removed? Is there a way to add it?
That was what I needed. I don't remember installing it as an app
previously. Thanks
In a message dated 7/25/2014 10:19:20 A.M. Eastern Daylight Time,
[email protected] writes:
(https://community.verizonwireless.com/)
A message from the Verizon Wireless Community
(https://community.verizonwireless.com/)
(https://www.verizonwireless.com/wcms/consumer/explore.html)
(http://www.verizonwireless.com/wcms/consumer/shop.html)
(http://www.verizonwireless.com/b2c/myverizonlp/) (http://www.verizonwireless.com/support/)
Glance screen no longer available?
created by primortal
(https://community.verizonwireless.com/people/primortal) in Nokia Lumia 822 - View the full discussion
(https://community.verizonwireless.com/message/1116065#1116065) -
When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up so I can see and click the hang up button, but it then blacks out intermittently and in the brief moments it is lit up, the hang up button doesn't work unless I press the home or lock buttons first
Wow- thanks Jim! I removed the case and voila... it worked. Knock on wood that you solved my problem with such an incredibly simple solution. I'll find out where this proximity sensor is and make sure my case does not interfere with it.
Thanks so much.
Annick -
STMS logon screen no longer shows when doing an import
For transporting objects from QA1 (Quality Assurance) to PRD
(Production), the logon screen no longer shows up. For audit purposes
we want this screen to show up. For transporting objects from DV1
(Development) to QA1 (Quality Assurance), the logon screen is there.
I've checked and no one has enabled "Trusted Services" in the domain
and there is no user id in the RFC connection and logon screen is
checked.
What else might I check to turn back on this logon screen?check TMS TRFC connections in SM59, check login information and delete userID and password.
try again.
good luck. -
My iPad screen no longer rotates.
My iPad screen no longer rotates. When I toggle the switch on the upper right, it just indicates a ringer either on or off. When I check in settings, it shoes the screen rotation as 'muted'. No luck turning it on or off either. Any ideas? Thanks!
Try double pressing the home button, then swiping to the right until you see the ipod controls. There should be an orientation button at the far left.
Maybe you are looking for
-
Burned CDs won't play in CD player
Since updating to Leopard, the CDs I burn will only play in the computer. My car player doesn't recognize the disk. I'm burning as an Audio CD. What else could I do? Thanks.
-
Battery Drain With Alarm Clock Function
This just started happening to me last week. I have 4 alarms set during the week days...in case I hit the 'Dismiss' button by accident. These alarms have been set since I got my phone in October. Well, last week I noticed that after the 4th alarm ha
-
I updated my ipad, how do i get my apps back? i backed it up?
i updated my ipad, and backed it all up before i updated it, all my music has come back but none of my apps?
-
Getting error while using CAN api's. Says channel not found in MAX.
Hi, I am using NI-CAN series2, can card. The same is not connected to my system. Hence i have used the virtual channel 256. Here i am reading the DBC file and providing an option to the user to select a set of messages to transmitt\receive. But i am
-
Best way to import data only from sql server 2k to ora9.2
I have a situation where I don't care about indexes, procedures. The DDLs from sql server 2k and ora9.2 are (mostly) teh same, I need to port the data from sqlserver to my ora database. what is the best way to do it? thanks.