My screen on my blackberry 8830 went black when i plugged it in to my computer
if an ybody knows what i can do to fix this please help i have taken the battery out and hard reset it nothing works if i plug it back into my comp it says that the computer cannot recognize the device all it does is blink a red light, nothing else please help
Do you have the Desktop Manager or usb drivers installed on the computer you're connecting the BlackBerry to?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.
Similar Messages
-
The screen on my ipad mini went black and it won't turn back on. how can this be fixed?
The screen on my ipad mini went black, and now it isn't responding or turning on at all. What can I do?
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
The screen on my iphone 4 went black and began to vibrate for half hour before it died completely. Anybody know if this can be fixed?
Ok? Why not? It is an original iphone 4 that I bought in a store .....No jailbreak.... I have had it for almost 2 years without problems and was on the facebook app when it happened .. I have over 1200 pictures that I want to keep .... 6 months since the lastsynchronization, unfortunately
-
The screen on my powershot a2500 is black when I try to take a picture.
The screen on my powershot a2500 is black when I try to take a picture. Is there a fix?
Several items to check:
Are the batteries fully charged? Low batteries can display photos, but may not have enough charge to snap a shot.
Are you using flash? If the batteries are low, it may take some time for the flash to charge up and display the scene on the screen. The screen will stay black until the flash is ready.
Are you outside on bright sunny day with polarized sunglasses on? Try without sunglasses on if this is the case.
Has the camera been dropped at all? Even a soft drop can loosen up the ribbon cable that goes to the LCD screen.
Are you able to see the menus? If you can, try a camera reset to defaults in the tools menu to see if that clears it up. You may have accidentally changed a setting that turned the screen when shooting. If not, remove the batteries for a few minutes then press the shutter button for a few seconds. Reinstall the batteries and see if that cleared it up.
If none of these work, you may need to send it in for repair. You will need to decide if it would be worth it or not if it is out of warrranty.
Steve M. -
The screen on my iPhone 6 turns black when on a call
The screen on my iPhone 6 turns black when I am on a call (and then I cannot end the call)
My iPhone 5s did the same and my company sent me a new one. That one had the same problem. I am now being told by my company that it is an app that I have loaded that is not compatible with the IOS update. They sent me an iPhone6 and advised me to only add my apps one at a time to see which one is causing the problem. Verizon, I was told, has been working on the problem as well. Don't know if all this is true but sounded right to me.
-
When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
when i plug my ipod into my computer it no longer takes me to itunes. my ipod screen is a white blank and i can no longer listen to tunes i have downloaded.
at one point i received a message that said it was corruped.My ipod has a white screen.
This forum category (where your question appeared) is for iPod shuffle, which has no screen. What iPod model do you have?
When you connect the iPod to your computer, and run iTunes, the iPod does not appear in the sidebar, under DEVICES?
At one point i got a message that it was corupted.
Where and when did this message appear? -
When i plugged my ipod into the computer it started to make buzzing and screeching noises. It became hot so i removed it and then the screen froze while it continued to make these noises. I have never had anything like this happen. (never gotten it wet or had it exposed to extreme temperatures) It is also unresponsive to any buttons on the ipod and it didn't show up when i plugged it into my computer. What do I do? Also if it is unfixable could i get a free one from apple?
Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David -
My ipod wont charge ive try everthing when i plug it in to the computer nothing happen but before that it was full charge and 5 mins after that it was 10% and tried charging it nothing but now the screen is blank...So what should i do?
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
what can i do? My iphone 4 screen went black but its still on. I know how to reset it but my top power button has been jammed in for months now. So does anyone know what i can do to try and get my screen back?
Bring your phone to Apple for evaluation and replacement. It's broken. There's no magic we can provide you.
-
My laptop screen goes black when i plug in an Hdmi cord
Initially I had both my tv and computer off. I connected the dvi to the tv and the hdmi to the laptop and turned them both on. I had no issue using my laptop as i tried to sync the computer to the TV. However i must have accidentally hit something in the graphics options as my laptop screen went black. I unplugged the hdmi cord from my laptop and the screen came back up. But now for some reason everytime i plug in the hdmi cord to the laptop the screen goes black. When i take it out it the screen comes back up. Did i change something that is causing this to happen? Any help would be greatly appreciated. Thanks
I have pretty much the same exact problem and setup as DaveA1. I have a Toshiba Satellite Laptop C55T-A5123 which I just purchased a few months ago and when I connect my laptop to my SONY TV via the HDMI cable the screen on my laptop goes black and the TV says no signal. It was working just fine up until about a week ago when I was watching a movie through my VLC player and then the screen flickered a couple times then video went completely out and I've never been able to get it to come back even once.
Here's the specs on my laptop:
http://www.newegg.com/Product/Product.aspx?Item=N82E16834114907
So far I have tried on two different TVs, swapped HDMI cables which work on my other HDMI devices, system restore and attempted to update various different drivers. I am curious to find out if Dave was able to find a solution to his problem. -
The screen on my iPhone has gone black while I was using it. It just "shut off". The phone is still working as I can hear/see it when it plugs into the computer, but the screen just wont turn on. I've tried the soft reset "holding down home and lock screen" and i've tried to restore settings. I went to the apple store and they said I had to send it to my provider (in another country) but my phone contract has run out.
Is there a way to fix this?
If not, is there some way apple can replace the phone? It's less than 2 years old. Surely the screen shouldn't just give out like that.
Thank youYou wrote...
' What can I do to solve this'
What have you tried...?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New... -
I'm trying to install a samsung series 7 750 monitor for use with my mini mac. When I plug the computer to the monitor I get a blank screen, no picture. When not plugged in to the computer the screen is black and a square displAys that says analog, HDMI 1, HDMI 2. Any ideas?
Hey there saraszeg,
It sounds like you are trying to use an external monitor with your Mac Mini but cannot get more than a gray screen. You can use the following steps to help troubleshoot the Mac side of things here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling -
My iphone turned off after I got off the phone today. It was more than half way charged and it went totally black. I plugged it into my wall charger and my computer, but nothing has showed up. It doesn't register on the computer either, the charge symbol doesn't appear, and there is no apple logo to be found. I have no idea what happened! It was totally fine before. I tried charging another ipod with my usb and wall charger to make sure that they were still working, and they weren't the problem. What happened? Is the phone dead for good? I have a 3G if that changes anything. THANKS!
Press and hold both the on/off button and the home button and release them both when the apple logo appears. That will reboot the phone. try that.
-
My iPhone 5c has suddenly turned off and went blank. I then tried to plug it up to the computer to restore it but i cant because my phone has a password on it and i CANT TYPE IT IN. Also when i plugged it up it started vibrating again and again constantly. What should i do?
It is probably still worth while taking it to an Apple store for a possible OOW replacement and let them make the decision, as it was broken before the OP took the back off.
See note below...
Maybe you are looking for
-
Unable to clear open items for Bank GL
Hi Experts, I have scenario where I am unable to clear bank clearing account through F-03. The Bank Clearing GL account master is NOT managed as "Balances in Local Currency only' Current issue is: Invoice is posted with USD currency Ex: $100 (1st Apr
-
What are the fundamental differences between PL/SQL and SQL?
-
Installing elements 4.0 on my (disc drive-less) new mac??
I recently treated myself to a new macbook air, which doesn't have a disc drive, and want to install a photoshop elements 5.0/4.0 macintosh disc. I'm hoping that I will be able to download directly from adobe (although I realise it's an ancient prog
-
HT1329 laptop died, need to move ipod music without erasing it!
the laptop my library is on for my nano has died completely. i need to know how to move the nano music on to the new laptop without erasing it from the nano. is it as simple as plugging it in or no? i do not want to try it and erase it before i know
-
AP check graphic design - R3 FCC 6.0
I need setup check layout for laser check printing in AP, how can I do it? Does SAP provide the import graphic for basic Laser Printer layout and we just need to edit a bit to fit on the check. We do not have Crystal report nor BW yet. I use canne