My screen on my iphone 4 stopped to work.

Hey. For a few days ago my iphone 4 started to mess with me.
When i trying to lock it up (from the screensaver) im just getting a blank screen.
I can see that iphone reacats and it lights up, but the screen is still blank...
If i put the sound on, i can hear that if i swipe my finger to lock it up, the lockup sound comes! but the screen is still blank
I have tryed to make a system recovery and letted it be off for an hour, this did not help.
Also running the latest update (4.3.3)
Sorry for my bad english but i hope you understand

Also tryed out the tips from https://discussions.apple.com/message/6982187#6982187
But no succes

Similar Messages

  • The screen on my iPhone 4s is not working it's just black & won't reboot?

    The screen on my iPhone 4s is not working it's just black & won't reboot?

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • HT4528 My screen on my iphone 4 is not working.

    My screen on my iphone 4 is not working. Even after I plug it up to Itunes it still doesn't work.  What should I do?  Is it a hardware issue?  My phone is not under warranty anymore.

    Reset, hold both home and power buttons until the iPhone begins to restart, usually about 10 seconds of holding both buttons. If still problem, Restore iPhone with iTunes 10.7 or 11 on computer. If still problem, make sure Front Screen Connectors to Logic Board are seated correctly. If still problem, replace front screen assembly. If you decide to take to Apple, it is $149 for perfect replacement iPhone 4 exactly like yours, Apple does not do Screen repairs on iPhone 4 they offer replacement iPhone.

  • Hi all, i need urgently your help please. My touch screen on muy Iphone 5  is not working, i dont understand as it has not been damaged at all, i dont know what happened and need urgently somebody helps me please

    Please anyone there can help me what I can do??!! touch screen of my Iphone 5 is not working at all and dont understand as it has not been damage and it is only 2 months and half!! it is not an old iphone and it has not been damaged, has happened right now and cannot turn off the mobile at all. Tried to take out the nano sim as i though it will be turned off but it has not been! i dont know what i can do and i am desesperate!!! thanks All for your help!!

    Removing the SIM has no affect on the power of the phone. It is just the part that facilitates connecting to your carrier. Try holding the sleep/wake and home buttons together until you see the Apple logo on the screen and then release the buttons. The phone should reboot. You may need to hold the buttons together for 15-30 seconds.

  • Does exiting out of the iCloud backup screen cause your iphone to stop backing up?

    I have always wondered when I am backing up my iPhone to iCloud if the backup stops when i leave the settings screen or if i hit the lock button to turn off my phone. I have always left my phone on the settings screen on the iCloud backup page because i wasnt sure.

    Your iPhone should backup fine.  You do not have to stay on the same screen.  In fact, you can browse the internet with Safari if you wish.

  • The screen on my iphone 4 stopped responding today...

    Hello,
    While using my iphone 4 this afternoon to take a photo, the screen cut off and it went directly to the "slide to unlock" screen. It's stuck there now and I cannot slide to answer phone calls or slide to turn off my device (when I hold down the home and power button at the same time) because the screen isn't reacting.., though i'm still receiving all notification (texts, emails, incoming calls..etc.)
    Should I try a restore?
    I've backed up photos and contacts that I need but if I restore now, will my library in itunes remain the same?
    I really appreciate anybody's help.
    thanks!

    Hold down the sleep/wake and home buttons together until you see the Apple logo then release, ignoring the slide to power off screen. Once the iPhone restarts, see if that takes care of it. If not, then yes, your next choice is a restore, first from a backup and if necessary as a new device. This will not affect your library, but it could delete the content from the device.

  • HT1212 My touch screen on my iPhone 5 is not working

    I tried holding down the lock & home button but the phone is still frozen. I'm trying to restore it, but I cannot because my phone has a passcode.

    Removing the SIM has no affect on the power of the phone. It is just the part that facilitates connecting to your carrier. Try holding the sleep/wake and home buttons together until you see the Apple logo on the screen and then release the buttons. The phone should reboot. You may need to hold the buttons together for 15-30 seconds.

  • The screen of my Iphone 4s doesn't work, it seems the display is broken. I've took an insurance when I bought the phone. What should I do to replace it?

    Hi, can someone help me with my questions?

    Contacts and Calendar entries should be synced to a supported application on the computer or a cloud service if using the device as designed.
    Pictures/Videos taken with the device should be copied to the computer regularly, if using the device as designed.
    All media should exist in iTunes on the computer.
    All apps should exist in iTunes on the computer.
    There may be some lost data from apps such as game status, but would you prefer to maintain that data or have a functional device?
    If the issue turns out to be hardware, it is possible to later restore from backup to get put the device back to the same functional state once the hardware is replaced.

  • IPod stop to work by itself

    Hello,
    I have an iPod Touch second generation, 8 GB (but I have only used 3GB) since 16 months. I have enjoyed my iPod and the facilities it offer.  I have noticed that my iPod has not working as it usually does.  It is too slow, and when I use it to browse or listen music the screen shut and the application stop to work or the screen turns black.  I can not delete the old messages from the application so I decided to close the app.  I have not used all the capacity and I try to install all updates that it needs also I uninstall the workless app, but it still giving me some troubles. If someone now what is happening and can share a recommendation I really appreciate it.

    Try in order:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restoring the iPod from backup via iTunes
    - Restoring the iPod to factory defaults/new iPod.

  • The top button on my iphone 5 stopped working recently.. Well it works but barely at all if every. Most of the time it only locks the screen if I click on the left side of the button. Also my Camera causes a blue pixelated spot on pictures I take.

    The top button on my phone recently stopped working. Well sometimes. Majority of the time if I click it hard enough on the left side of the button it will lock the screen... Otherwise it doesnt work at all anymore. Also the camera appears to be placing a blue pixel on pictures I take. Its annoying. What should I do?

    It's completely situational. Without being able to directly compare the "scratch" on the original poster's iPhone with your iPhone, what gaamcc had happen could not be extrapolated to guess what Apple may do in your situation. It will depend entirely on what the Apple technician diagnoses after examining your iPhone. He/she may decide that any damage is strictly cosmetic and didn't have any connection with the problem you're taking your iPhone in for, or he/she may diagnose the problem as stemming from user damage. You'll just have to see when you go to the Apple Store.
    Regards.

  • In the middle of my last update it stopped updating in the because of an unknown source, and now my screen on my iphone is frozen with the apple logo and a loading bar. Help??

    in the middle of my last update it stopped updating in the because of an unknown source, and now my screen on my iphone is frozen with the apple logo and a loading bar. Help??

    Unknown "source"?  Do you mean unknown "error" followed by a number?
    http://support.apple.com/kb/TS3221
    Follow the instructions in the article.  When you connect your phone again, you may have to press both the home and sleep/wake buttons until the Apple logo reappears, then continue pressing the home button until iTunes detects the phone in recovery mode.

  • Airplay from Iphone 3GS stops as soon as screen turns off!

    When I play fe. a Youtube film from my Iphone 3GS via Airplay to my Apple TV, it stops as soon as the screen of the iphone turns off, or when I switch to a different program.
    This is very annoying as this means that I have to touch the screen every 30 seconds to prevent it of going to standby.
    Is there a solution? This can't be normal!

    Welcome to the Apple Community.
    Yes and no.
    It's normal that it should stop sending AirPlay when you switch to another App, only limited apps can truly multitask such as phone, music, etc, the rest are simply paused (and pausing when AirPlay is in progress disconnects AirPlay)
    It isn't normal that AirPlay is disconnected when the screen sleeps, it doesn't do it on any of my devices, although I have seen it mentioned before but don't recall a solution being mentioned.
    Any suggestions I could make would merely be fishing, such as whether your passcode lock is on/off, mine id off......

  • My iphone 4s screen went black, then siri stopped working, now the phone wont charge

    My iphone 4s screen went black, but Siri was still working and then a little bit later Siri stopped working. I then let the battery go dead and have plugged it into my laptop and it is not responding. I tried holding the lock button and home button for 10-15 seconds but that did nothing. Any ideas on what the problem could be?

    Hi
    how old is the device as the battery may need replacing or if no help visit your local apple store or contact support
    good luck

  • My iphone has stopped working it had 80% of charging but the screen got black and now i cant switch it on, what should i do?

    my iphone has stopped working it had 80% of charging but the screen got black and now i cant switch it on, what should i do?
    help me ASAP please

    Hello sameen shah,
    The following article would be a great place to start for information that can help get your iPhone working again.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Suddenly my iphone 4 stopped connecting to the 3g network although the 3g symbol is there on the left of the screen

    suddenly my iphone 4 stopped connecting to the 3g network although the 3g symbol is there on the left of the screen did this happen with anyone ??

    Try turning on Airplane mode for 30 seconds (Settings>Airplane Mode>ON), then off.  See if you can connect to 3G now.

Maybe you are looking for

  • IPhoto'11,good to use or not?

    I bought iLife'11 in the first time after it released and the nightmare begun... For iLife I use iPhoto almost exclusively so I don't know if other applications work well or not,but the iPhoto'11 ......too bad to use. Yes,it's more beautiful and you

  • How to increase width of the complex table column in Agentry?

    I am using Agentry 6.0.38.1 client and Smart service manager 3.0 and Agentry 6.0.32 plugin, developing for Android client I increased no of characters for that complex table column in Agentry editor still its width is same in Android device. How can

  • Portal content/iview refresh in the screen

    Hi SDNs, I have created some transaction iviews, like a group of transactions, one is for Purchase related and one is travel related. Once i logged into portal, i create a purchase order using the transaction iview and then i am navigation trip trans

  • Automatically change column headers across drill levels.

    .Hi,       I have a table in my Webi report that displays month-wise data. On drilling down, it displays day-wise data. Now, the first column of this table is 'Month', which displays the month in MM-YYYY format. The column heading for this column is

  • Numbers version 3.5.2

    How does one show breaks on a page in numbers version 3.5.2? I'm not able to see the end of a page without going to print preview. Thanks, Leo