My screen settings are off-kilter... help?

My icons across the bottom are slightly under the frame, and when I tap phone for example, then the icons across the bottom are so out of the frame that only the very top of each icon is visible. Then, in other apps, the whole screen is canted off to the left, rendering some buttons in those apps unusable. In messaging, the white space normally found on the left is gone, and the messages are cut off by a letter. I tried restoring... no luck. Any ideas?

Then the only thing left for you to do is restore your phone as a "new" device in itunes, followed by syncing your itunes content back to your phone. If no change after doing so, make an appointment at an Apple store to have your phone replaced.

Similar Messages

  • Consistent alerts error 3170...and my settings are correct! HELP!

    About every 5 emails will not send due to an error with this message. It has been happening more and more the last few weeks. The emails always finally send- but this is ridiculous.
    I have Verizon Fios
    -Mac 10.7.5
    -Use Pop 3 on Outlook for Mac 11  version 14.3.9
    Here is the notice:
    Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.
    error code 3170
    This has been happening only when trying to send emails and it only happens every 4th or 5th email. After about 10 minutes any held up email does not get the error anymore and sends.
    All settings are the latest Verizon settings from their even newest notice on 11-21-13...this has been happening since they changed the ports to 995 on the pop3 incoming and 465 on the SMTP outgoing several months back. It is just getting worse!
    Please help.

    If duct_tape's excellent post does not fix it see this please : http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/error-code-3170/192a19bf-5f7a-...
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

  • I am not receiving new emails on my phone.  I am receiving a pop-up that reads "cannot get mail" saying my server is not responding and to check my settings.  My settings are correct. Help!

    Looking for help.... I keep getting a pop-up message on my phone stating that my server is not responding and to check my settings.  My settings are fine.  Any advice on what I can do to receive new emails on my phone?  Help!

    For a few weeks I have been using the GMail app on my iPhone 4S to get mail without problem.  When I wanted to check something in Apple's Mail app, which has worked well for years, I now get a message for my principal email address that the server is "not responding," even though the same server is responding to my GMail app.  For some reason, when I dismissed the message in Mail, it popped up again, but then could be dismissed.  Did something change in Mail that requires some imap addresses be deleted and readded?  Any idea?
    I would not want to think that Mail is programmed to befuddle if it is ignored too long.

  • To update my ipod i have to enter network settings, but i dont know what they are? I dont even know what network settings are! any help or suggestions?

    Im trying to update my old ipod touch. Unortunstely it says I have to enter newtwork settings, however I dont know what my network settings are because I dont really know what network settings even means.

    See:
    iOS: Connecting to the Internet

  • My settings are off!  Please help!

    I am working with 1.5 right now and my controls seem to be messed up.  I cannot highlight and mix down from the multitrack!  The cursor shows a + sign and, although it does highlight, it's not working the way it used to and, again, I can't seem to mix down.  Is there a way to restore to the original settings?  HELP!

    kidcruise wrote:
    HELP!
    Assuming that you can see the toolbar at the top of the screen, you could try selecting the time selection cursor rather than the move/copy one that you've currently selected...
    I wouldn't call this messed up at all - it's an entirely deliberate thing that's intended to be there, and it can be very useful. You will find that there's a hybrid tool as well, and a lot of people like using this.
    And yes, all of this is in the help files, as a cursory glance at them would reveal... (I was determined to get that pun in somewhere!)

  • Apple TV Doesn't See Home Shared Library- All settings are correct. Help?

    OK, so, I have two apple tv's, first gen. Both are completely updated. Netflix runs fine on both. Apple TV #1 see's the library on my wife's computer and the library on my computer. Apple TV #2 does not show up on either. However, sometimes it does- it's hit and miss.
    I know it's not internet connectivity because I can browse iTunes and netflix on #2 without issue.
    I've tried fixing the power settings on #2 to go off after the computer goes into sleep.
    I've tried re-starting iTunes and, sometimes it shows up, sometimes it doesn't.
    The router security has been removed to ensure easy connectivity.
    Using "Remote" application on the iPad or iPhone or iPod, I can see the libraries I'm trying to connect to. Within the remote app is the only place that I can consistently see the #2 ATV.
    I've tried turning off home sharing and turning back on for all computers-nothing. I've tried almost everything I could find on these forums but nothing is working to make this thing consistent. I've done the re-sets to manufacturer settings. The only thing I haven't tried is hard line witch is not possible due to set up but cannot be issue because I can access internet, itunes, and netflix with atv#2. Please help.

    I have a similar problem.
    I have a 2nd generation apple TV and all worked well until I upgraded my imac to the 27inch Imac.
    Since then I cannot open home share on the apple TV.
    I can see the internet, movies & utube but no computer.
    I've tried turning off firewalls ( Norton & Macs Firewalls) but no change.
    I've even tried going from wifi to ethernet but still no response. Every time I enter my apple password & ID it says cannot find the server.
    I have airplay on my ipad which works perfectly on the computer (not apple tv because I cannot turn on home share)
    Any suggestions
    thanks

  • Xserv - user settings are not saved - help!

    I've noticed that user settings do not get saved under OS Xserv...
    Whenenver I login I get the default dock, with all the admin icons missing!
    The desktop is saved in the root as /desktop/. (?!?)
    When the machine was installed the first user was setup as Administrator (Admin) but it was deleted (against my sound advice) and since then things like the FTP server malfunctioned... The keychain seems to pop up a lot as well, and can't be opened / used. And the bookmarks don't get saved as well.
    I'm assuming that user settings like the Dock should be saved somewhere.
    Please help!
    Everything else seems to be running but loosing all UI configurations at log-offs is taking a lot of time which I currently don't have enough of.

    Anyone?
    I was hoping that I'd get an answer through the forums.
    I'll wait till next week and if there's still no post I'll contact Apple's Phone support.
    Please post any suggestions - a Mac Server shouldn't be so fragile!

  • Desktop Icons moved to right side of screen and are stuck! Help please.

    Can anyone please help me? My desktop icons have moved to the right side of my screen and I cannot move them. I have tried 'View Options', right clicking the desktop, 'Finder Preferences' and even a couple of terminal commands suggested in different forums. Nothing helps. In addition, I can't drag to desktop anymore. Anyone? Please. This has consumed me for almost a week now. Thanks.

    rightclick on the desktop, click "show view options", choose any thing else as "snap to grid" in the "show icon preview" field.

  • Hi - When I go into Contacts and type a letter in the search bar to get to last names that begin with that letter I get a list of random names that don't correlate to the letter. My settings are fine.  Help ?

    Hi. When I go into my contacts and type a letter in the saerch bar to get to a list of last names that begin with that letter I get a list of random names that don't begin or end with the letter.  My Settings appear fine.  Any insights would be greatly appreciated.  Cheers Bill

    The search bar is not designed to take you to names beginning with the letter you put in. If you want to do that, use the letters down the side. In the search bar, the device will return results for all contacts that have that have that letter in them. If you type a couple of letters of the name, you'll find what you want faster. Once you get used to how it works, it's quite efficient.
    Best of luck.

  • My monitor flesh tones are right on. Only the print flesh tones are off.Need help?

    Do I need to re caligrate the monitor or make some kind of adjsutment?

    It sounds like a calibration problem. Try recalibrating the monitor. Also make sure that you're using the appropriate printer profile.
    Hal

  • My macbook screen hinges are off

    When ever the lid is close on my macbook late 2006 you can see that the left hing is sticking out but it look normal when the lid is open

    I can't see what is exactly wrong so I don't know what it might need, and it also says you dropped it.

  • Edit Service tab Screen settings

    Dear experts ,
    I want the field "Actual Quantity " to be displayed in the service tab layout .
    I am able to make other fields visible n all , but Actual Qty field is skipped by the system .
    Pls trell me what coud be the reason ?
    All screen settings are fine as i can see that the "invisible tick box " is not marked for actual qty .
    Pls help
    Is there anyewhete else that i need to make settings ??
    Regards
    Anis

    Hi
    Check in ML90 - for field status groups say PT9 (service item), NB (standard PO) or ME21 - in quantity fields - entered quantity is in hidden status? Make it optional and then try.
    Thanks

  • Font/Screen settings under Reports Services 10g

    Hello,
    How can I determine what my Font and Screen settings are set in the same way as my Oracle 9i iDS environement running under Windows XP Pro.
    I am running Forms/reports Services 10g on a Red Hat Linux Enterprise 3 (ES) server.
    PT

    The listener error is probably because either the listener connecting the db that contains the application data is down or the listner to that db is down.
    The sequence you list is for Application Server middle tier where forms and reports services run. Not starting Em agent has only one consequence. You cannot use EM to manage the instance.
    Pavna Jain

  • Why does iphone 5 not use whole screen viewing for videos also when using iplayer app it only works on iphone 4 screen settings. why can we not have whole screen displaying image.

    I have a iphone 5, I was dissapointed that when watching iplayer the screen settings are same as iphone 4 so end user has no joy enjoying the big screen , I have noticed youtube does the same,

    It hasent been updated to support iphone 5 screen size yet, it will come in time.

  • HT1766 The screen shows problems with iCloud only choices are ignore or settings, however nothing I do will unlock it from this screen, cannot power off keeps that bubble on the screen. What do I do?

    The screen shows problems with iCloud only choices are ignore or settings, however nothing I do will unlock it from this screen, cannot power off keeps that bubble on the screen. What do I do?

    Try this now.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Maybe you are looking for