My screens went black during ML installation - what to do?
Hi,
I'm trying to upgrade from Snow Leopard to ML on my MacPro right now but my screens just went black half an hour ago and nothing happens.
What should I do?
I just had to wait; then it started up alright.
But it's slower than Snow Leopard. A 3D file that took me 2:57 to render in SL takes 3:08 in ML.
Similar Messages
-
Screen went black during migration from time machine backup
Just did a clean install of Mavericks on my wife's 3-year old MacBook Air. I erased the hard disk first from the Recovery drive. Then did the Maverics install. All went well. Then I started a Time Machine migration from a back up I had on a Toshiba HD. Everything started well showing about a 2 hour back up time, but about 1 hour into the migration, the MacBook screen went black. I couldn't get it to go on, so I did a hard reboot of the system. I've had to start the migration again, but not I'm concerned the same thing will happen.
Any ideas what is going on?You can also go to System Preferences/Energy Saver and set Display sleep to never until you are done, then reset it.
-
Screen went black, now it's making noise.
My iMac screen went black during use. When I re-started, it began making a roaring noise. Any ideas what the problem might be?
The roaring noise is your fan, it's likely that your power supply has failed, usually it's because of bad capacitators,
-
Iphone 4 screen went black and kept vibrating
Hi All
Last evening i received a call and my iphone 4 went black and kept vibrating the only solution was to drain out the battery and then it regained its normal state ..Hi,
I too have this same issue, on my iPhone 4s white 16GB, the screen went black during a text. It would not turn back on, I tried doing a reset (hold home and power/sleep button), but nothing. I then plugged the phone into the USB power, and then the phone starts to vibrate/buzz every 3 seconds.... I tried to resert the iPhone while plugged in...nothing... I then unpluged the iPhone and the buzzing stops...
I wonder what the buzz/vibration code is.... 1/2 sec vibration every 2.5 to 3 secs non-stop.....?
I did run the update that come out last week, other than that...no crazy apps have been installed, no jail break...just take photos, email, text and few games....
PS LTF -
my iphone fell on the floor and the power botton wont work and also the screen went black i already tried to reset it throun itunes but the phone did not connect and i dont know what to do
You can take it to Apple and get replaced as long as you pay for the replacement.
Allan -
I installed ios7 on my iPad 2 yesterday, this morning it wouldn't open the weather channel app. I thought maybe I should power it down. When I held down on the power button the screen went black and now it won't do anything. What do I do now?
Try a reset: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
-
Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the on/off button and menu button to reboot it. So it turned off then back on but it has been stuck on the loading page for an hour. What's wrong with it?
- Let the battery fully drain. After charging for at least an hour try here:
iOS: Not responding or does not turn on -
I updated my ipad today. right after it updated, the screen went black. Since then I have not been able to turn on my ipad. I am recharging it. It has been recharging for 55 minutes. I have tried to reboot, nothing. I have tried everything i know to do. Nothing What else can I do?
You may need to try recovery mode now. Read this.
iOS: Unable to Update or Restore -
My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I bought an iPod touch 4g and I plugged into my Mac to put some songs from iTunes on to it but then my screen went black then flickered then turned to a USB cable pointing towards a iTunes music note what could I do to fix it.
See the More Like This Section on the right...
-
My screen went black what is wropng with my phone
hi all my screen went black i cant see a thing and then it will start working again and then it will go black again, sometimes it works with the screen slide open and then sometimes it will only work with the screen shut, what can i do to get this fixed for cheap or is there something i can do myself
Is it still in the 1 year warranty?
THE BITTERNESS OF POOR QUALITY, LINGERS LONG AFTER THE CHEAPNESS OF PRICE, IS SOON FORGOTTEN. -
My phone started vibrating mutiple times last night and the screen went black, and then it stopped and now I dont have a clue what to do. How should I fix this problem because I cant turn it back on? I have only had my phone for 2 months.
I also live an hr away from the Apple store, so its not the best thing to go there just to ask a question and find out what to do
-
My iPhone screen went black. Is there anything I can do to make operational?
Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.
-
IPad 2 screen went black all of a sudden while i was using it. what do i do
i recently bought an iPad 2 its been working fine since. but today i was using it and i was putting an app in a folder then all of a sudden the screen went black, iv tried pressing the home button and on/off but nothing works
Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
Rented movie and during playback screen went black
After about 20 hours of error messages, I was able to download a movie rental from iTunes. After watching less than half of the movie on my iPad, first the screen froze and then the screen went black. I closed the video application and I also reset my iPad, but still the video screen remains black when I open the video application. Trying to download and watch movies on iTunes is terrible. Please help ...
I am deployed in Iraq and have only my 1st gen iPad with me. I purchased 4 movies via iTunes however, the internet here is very bad and there were a ton of interruptions so it took almost 4 days to complete all the downloads. When I started watching one of my movies, it froze and the display went black. I to tried a restart first on the video application and then on the iPad itself to no avail. It wasn't until I reset all settings in the general tab of the systems settings did the video application start responding but if I tried to play the same move, it would do it all over again. When I go to iTunes and do a check for downloads, nothing is there however, I believe that with all the interruptions, bits were missed in the download process and iTunes simply cannot detect it. Also, if I do delete the movies in question, I will have to buy them again because the iPad hasn't been synced to my computer thus no transfer has taken place. Apple either provide a workaround for re-downloading movies free of charge to iPads or refund us our money for content that you have failed to deliver.....
Maybe you are looking for
-
CS6 suite crashing in Mountain Lion, the fix
I had a persistant problem where the CS6 trial of Photoshop crashed on 'Save As' under a new install of Mountain Lion. After 3 days, and many re-installs, I tracked the problem down to 4 installed fonts, two of them Adobe font suitcases. They are...
-
Lumia 900 update to W7.8
I bought a Lumia 900 on Ebay a week ago. It turned out that it was an unlocked AT&T (unlocking code supplied as well). Apart from Drive I'm very satisfied with it. I have found, installed & mostly tried the apps I need. (Why is MS using an Apple ter
-
Disabled item problem on Apex 4.1.1.00.23
Hello gentleman's I've got a problem. On my application i have a page with a text field with the options 'Disable' and 'Save Session State' setted to 'yes'. When i put some value on the text field using javascript and try to submit the page the follo
-
Is it possible to insert media into Adobe Muse slide show?
Is someone can help me out my question? Thanks.
-
When I try to repair my firewire hard drive with disk utility I get the error message below. Verify and Repair disk "Monster Drive" Checking HFS Plus volume. Checking Extents Overflow file. Checking Catalog file. Missing thread record (id = 244930) I