My SD-card reader don´t takes SDHC Computer Pavilion zd8180ea Win-7

I tryed to uninstall the reader and start the computer with the card. No result
What can i do is the computer to old?

Your zd8180ea appears to be from 2004 or 2005, which is before the widespread introduction and use of SDHC compatible card readers. It is very likely that the computer is too old to use with SDHC cards.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

Card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej

card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej.
Tried downloading this driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75456-1&cc=il&dlc=he&lc=he&...
still dont work.

Hi,
Download and install the Chipset driver on the link below.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45041.exe
After the installation has completed, restart the notebook.
Next, download and install the Card Reader driver on the following link.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45046.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Qosmio G35-600 - Control buttons and card reader don't work

Hi,
So I recently installed windows XP on my Toshiba Qosmio G35-600 and I found all the drivers except for two. If anyone out there could help me find them that would be great.
1) The first driver I cannot find is for the Toshiba control buttons at the top of my keyboard (I believe that is what they are called). Quosmios have 12 buttons on the top above the F keys, and currently only my power button, the brightness up and down buttons, and the dolby sound buttons work. The analog TV button, the media center button, play, stop, previous, next,record, and s-video out buttons don't do anything anymore. It would be cool if i had an s-video out ability again but mostly what i want is the play, previous, and next buttons to work.
2)The second problem I am having is with my built in SD card reader. A few times I thought I found the correct driver but after installing it the SD card was not showing up in my computer.
A preemptive thanks for the help,
Xamboni

Hello
I think you should install the Toshiba controls for Windows XP that you can find on the Toshiba website. Check this!
http://www.csd.toshiba.com
The driver for the SD card slot you can find on the Toshiba website too.
What SD card have you tried?
Try it with an other SD card and use the Toshiba SD card utility to format the card.
Greets

SD card / reader don't mount on the desktop

There are ongoing SD / SDHC card issues that Apple needs to address.
I have an both an original MBP and original MacBook. Both are running 10.6.2. Both do not mount my SD or SDHC cards on the desktop. I've tried 4 different cards and 3 different readers (1 just came from Amazon today).
They do show up under disk utility. To access the data I have to make an image from it and then it mounts no problem. When in a camera, the camera mounts, iPhoto launches and I can transfer the images. But in a card reader, no go.
I just did a SMC reset and that did not help.

Hi Herb: Unfortunately, Apple does not monitor these forums for suggestions, etc. Try [this location for providing suggestions|http://www.apple.com/feedback/macosx.html] to Apple.

New try - 201X 5-1 media card reader isn't recognizing SDHC - Help!

I am trying to get it to read a 16g SDHC card, and nothing happens. I go to device drivers in Control Panel, the media reader isn't listed. I see no-one else having this problem. I go to Lenovo's drivers and all I find is integrated camera and media reader but the update is only for the integrated camera.
I was given this instruction:
Is this the first time you are using the card reader in your ThinkPad? >Ostensibly Yes>
Under your bios menu, under security for I/O, is your card reader disabled? >How do I go about this?
I was also told that under drives in device drivers it should be listed and it is not listed.
Many thanks for any help.

maybe try to reinstall the OS, and see whether the card reader is detected. if not then you may want to seek warranty? (if you have warranty left).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Card Reader not showing up in Computer (PC - Vista) but does in LR 3

I've been using Lightroom 3 for about a week and noticed last night that my card reader is no longer showing up in Computer (listing of internal & external drives) but I can find it in the Computer Management screen. I can access it through the Computer Management screen and it can be accessed through Lighroom. Has some default setting been changed and my card reader hijacked by Lightroom. Any help or ideas would by appreciated. It works fine one another computer (desktop with Lightroom 3 installed) but not on my laptop.
I'm running it on a PC with Vista OS

Try using System Restore to restore a previous restore point from before this became an issue.
- Peter

My newly purchased Kingston 19-in-1 card reader is not recognized by the Mac

I just received my Kingston 19-in-1 card reader and connected it directly to the back of my iMac (iintel) running on OS X Lion 10.7. It did not show up. I checked Disk Utility and it shows the following:
Info EOS Digital
Name: EOS Digital (my Canon DSLR)
Type: Partition
Mount Point: Not mounted
File System: MS-DOS (FAT 32)
Connect bus: USB
Writable: Yes
Capacity: 4.11 GB
Can be formatted: Yes
Partition number: 1
I am positive the problem is due to the MS-DOS (FAT 32) file system (my other laptop is a PC running on Windows Vista), but I don't
know how to fix this. Since i did not want to lose any files on my CF card, I took a blank formatted card (formatted in camera) and took 2 photos. When connecting the reader to the Mac it did not register.
I have a Sandisk 8-in-1 card reader which worked just fine on the PC, and the Kingston reader also works on the PC (after i tried all the above ). I have read other forum discussions whee people say that the Kingston card reader works on their Mac
I am getting desperate. Can someone help me?
By the way, I checked on two Apple Stores to try and get tech support and got "voice mail jail" which is most disappointing. I suspect this is Apple company policy forcing me to make an appointment (which I am willing to do, but for heavens sake, don't cut me off on the phone!)

Thanks for your response. I plugged the Kingston card reader into my Mac this morning before turning on the computer and lo and behold, the test photos appeared. I wonder if there is a procedure where one as to do certain things first (e.g., connect card reader first before turning on computer). I will stick to the same computer port from now on. I do not consider myself out of the woods as I have to try this using Adobe Lightroom to post-process my photos.
As for the software updte, Kingston advised that the update is not compatible with Macs, so I did not update.

Why can't I use/build an SD card reader for iPhone?

I have searched and searched for an SD card reader for iPhone. Apple offers the camera connection kit for iPad but for some reason they have made it incompatible with iPhone. This doesn't make a whole lot of since to me unless they are trying to drive users to buy an iPad. So far I have only found one SD card reader that claims to work on iPhone: http://www.zoommediaplus.com/index.html . If they have actually made it work with iPhone and the app is in the App Store then Apple must allow apps to transffer data from SD cards. If so I can make one myself and build the hardware to go with it since the Apple SD card reader doesn't work on iPhone.
I guess my main questions are:
     Does Apple allow SD Card readers for iPhone?
     if not:
          Why don't they?
          Can anyone tell me where it is documented that you can not use SD Cart readers with iPhone?
          How does ZoomMediaPlus get their app in the App Store if it isn't allowed?
     if they do:
          Why aren't their more SD Card readers for iPhone?
          Why doesn't Apple's lightning SD Card read work with iPhone?

Of course they forbid it. You realize that an iPhone 6+ owner cannot use the Apple Lightning SD Card Reader, don't you? We know the support for their own SD Card Reader is built into iOS 8 because it works with iPads. Therefore, Apple intentionally turned the support OFF for iPhones.
and it appears no one else has bothered to attempt to produce one
No, Apple forbids any third parties from producing one. They produce them for iPads but they cannot work on iPhones, because Apple chooses not to permit such functionality (i.e., they forbid it). Third parties produce such adapters for Android, so obviously they would want to do the same for iOS so they could sell more.
You're recommendation for AirStash is uninformed. I've tried it and found it to be a clunky time-consuming workaround if all you want to do is import some photos from an SD card. Using Photos in iOS to import photos is a far more elegant solution - an Apple solution that just works (if you purchased an iPad).
If it bothers you that iPhones do not work with Apple's own Lightning SD Card Reader, then I suggest you leave feedback instead of attacking those who point it out:
http://www.apple.com/feedback/

W500 card reader problems- with a wrinkle??

My card reader won't recognize SDHC cards. I have a W500 (4061-BL2) running Win XP Pro, Service Pack 3. I installed the latest drivers for the 4-in-1 reader (Ricoh Multi Card Reader driver 3.64.02 which does show up in the "Add/Remove Programs" listing). Based on reading this forum, I considered KB934428, but, when I tried to install the hotfix, I learned it is not needed with SP3. (I didn't try to install KB923293 which is the other hotfix frequently mentioned for this problem as it appears to be older than the ...428 hotfix??)
Everything appears to be normal in Device Manager.
When I try to insert a Kingston 8GB SDHC card (that I know has pictures on it as I can see the pictures on my Canon camera), my system does recognize the card (under "My Computer", it shows up as "SD/MMC (E", but, when I try to access the card, it only says "The disk is not formatted.. Do you want to format now?".
I know there are 20 other forum posts on this problem, but, mine appears to be somewhat unique with XP SP3.
Like everyone else with this problem, I can read the card just fine with a USB card reader.
Any help will be deeply appreciated! Love the W500 except for this nagging problem as I am really anxious to use the card reader.

I just fixed a co-workers Ricoh 4-in-1 reader by following these instructions
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70881
It says it's for R61 but worked on W500.
Running Windows XP Pro SP2. I tried the Lenovo Drivers but they didn't work.

USB Card Reader Works with Bios 1.70

Just to report that I upgraded to Bios 1.70 and reconnected by USB Card Reader and I rebooted the computer a few times with NO bios hang-ups! Your milage may vary, but I'm happy to see MSI fix this big issue with me!

...hmmm...same here, maybe 95% of the time...nevertheless, much improved...

Bridge in CS5 does not recognize card reader

Help! Suddenly, my Bridge in Photoshop CS5 does not recognize my card reader. I have a HP Pavilion Elite HPE that has the card readers (for 15 different cards) built into it and all of a sudden it will not recognize the card reader drive. I have uninstalled CS5 and re-installed it thinking that if the path had been broken that it would be reestablished by the reinstallation, but that did not happen. I have checked the device manager on my HP and it tells tme that this drive is working correctly, but however, it is not evidently working correctly. Has anyone else had this happen to them and if so, what was the solution? I have an e-mail to HP for tech support, but have not heard from them as of yet. Thank you in advance for your input.

You want to at least choose the 1st, reset preferences.
Purging the cache can solve some problems, it will be rebuilt as you visit each folder.
Resetting Workspaces is probably not necessary unless you have display problems.
To view the files in Win. Exp. you have to open then navigate to the device where the card is being read.
If you can view the card in W Exp then the card works, and you can get photos in Bridge with File/get photos from camera.
If you do not get the auto load window when you stick the card in you will have to look at the autoload optons in the Op. Sys. Look in Help file for info. on where to look.

SD/SDHC/SDXC/MMC/MS/MS Pro card-reader slot not showing up in windows explorer.

I have a Lenovo IdeaCentre, purchased only four weeks ago. It product family is IdeaCentre k410, machine type 10089. Anyhow, the problem is: I inserted a microSD / microSDHC, both of which seem to fit into the slot fine, though neither registers under anywhere in windows explorer, neither in the root of C://, nor in any of the subdirectories, or on the main listing of mounted file systems. I used the Lenovo Driver Updater and re-installed the SD Card Reader driver, to no avail. Any help would greatly be appreciated. As well, the computer runs Windows 8, which has some features I'm unhappy with, and although this is not a windows forum and I don't mean to create a thread that deviates from lenovo-specific topics, I was wondering if there is anything in either the machine architecture or the software of Windows 8 that could hinder m in installing a dual-boot system so that I might have the option of running a variant of linux as a sub-operating system, as I did with windows XP.????? OK any help at all would be so greatly appreciated, thank in advance. I really want to be able to retrieve some writing files I have stored in that micro SDHC card. As another aside, does anyone know the max limit of RAM this computer can take and if it is DDR or some other type?

hi BrokenHalo,
Welcome to the Lenovo Forums.
Regarding your questions:
1. When you inserted the SD card, do you hear a sound that a device is inserted and under Device Manger, do you see a Card Reader?
If not, try to:
a. boot intto the BIOS by pressing F1, load defaults by pressing F9 then press F10 to save and exit BIOS.
b. Reseat the front panel connectors (see page 23 of the hardware maintenance manual)
2. To install linux (i.e. Ubuntu), see if you can install Ubuntu via UEFI. If you're unable to do so or if you want to install other OS, try to:
a. Boot into the BIOS by pressing F2 and set the following settings below
UEFI Boot Mode = Legacy
Secure Boot = Disabled (if applicable)
CSM = Disabled / Legacy or Other OS (if applicable)
OS Optimized Default = Disabled or Legacy (if applicable)
b. When finished, press F10 to save and exit BIOS then try to install Ubuntu via Wubi or insert your Windows installation disc to install a different OS.
3. As per this pdf data sheet, the Lenovo K410 has a max RAM of 8GB PC3-12800 1600MHz DDR3 but Crucial reports that this unit can take up to 16GB PC3-12800 1600MHz DDR3 - check this site.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Why don't my photos show up on card reader after an export from iPhoto?

Just exported 78 photos from iPhoto to a memory card reader. After completing the export, I returned the memory card to my camera.The photos don't show up. What could have gone wrong?

The format and arrangement of folders on your camera card is quite specific, and unless you've export the photos to exactly the right folder, name din exactly the right way, it won't know they are there.
Format the card with your camera. Take a snap. Pop the card in the Reader. Find that snap... that's the folder your photos should go to.
Regards
TD

HP Pavilion dv6 card reader won't detect some SDHC cards

Notebook Hp Pavilion dv6-6104so
Windows 7 - 64 bits
The notebook's card reader won't detect some of our SDHC cards. We have updated the driver to the latest version, Realtek PCIE 6.1.7601.90, and the BIOS, but it still won't recognize some of our cards.
We have six SDHC cards, three SanDisk (4, 32 and 32 GB), two Kingston (8 and 8 GB) and one Integral (4 GB). The card reader recognizes four of them (4 and 32 GB SanDisk cards and one of the two Kingston cards). What is strange and that you may have already noticed is that the card reader recognizes only one of two cards with the same brand and capacity!
About the two cards that don't get recognized in our notebook, they work properly in their corresponding cameras and are detected without problems by another HP Pavilion dv6-3138so notebook card reader, as well as by two netbooks of ours from two different brands.
When we connect the cameras (one Canon and one Sony, both point-and-shoot) to the computer via a USB 2.0 cable, the laptop detects the cameras and through them we can access the cards.
We purchased the laptop less than two weeks ago in Helsinki, Finland.
Thank you in advance for your help!
This question was solved.
View Solution.

Hey Everyone,
Using a high capacity card in a standard card reader slot will cause this issue. Im going to guess that the cards you ar having issues with are the SDHC cards and not the standard SD cards. As Naoto stated, by using a camera as a card reader you an workaround this. You can also look into SDHC card reader adapters. Here is a good article on the SDHC cards: http://goo.gl/lj5Fq
Hope this helps!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I changed my AppleID password this morning and now I can't load iTunes gift card numbers to download music. The system keeps taking me to the account screen to verify payment info. When I click on DONE, it takes me back to the password screen.

I changed my AppleID password this morning and now I can't load gift card numbers into iTunes to download music. The system takes me to the account settings screen to verify those and when I click on DONE, it takes me back to the password screen and I start over. This becomes an endless loop. What now.

Greetings Ron,
After reviewing your post, I have located an article that can help with gift card issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
If you can't redeem your iTunes Gift Card or code
Contact iTunes Store Support
If the code is completely scratched off or you still can't redeem your gift card, contact iTunes Support:
Go to the iTunes Store support page and choose your country.
From the menu on the left, choose Contact Support.
Click Contact iTunes Store Support.
Follow the instructions.
iTunes Store Support might ask you to send these things:
Image of the full front and back of your gift card
Sales receipt showing when your card was purchased
Serial number from your gift card
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

My SD-card reader don´t takes SDHC Computer Pavilion zd8180ea Win-7

Similar Messages

Maybe you are looking for