My search area has dissapeared on my homepage

my homepage no longer shows the top area which shows the website Im on. I also noticed my search area has dissapeared from the top right hand side of the homepage. what the h is going on??

On what Mac running what version of OS X, using what browser?

Similar Messages

Does Mozilla block examples from popping up under a google search, or has my Mozilla Google homepage been hijacked to show the one I was looking at when it was taken over?

Searching with explorer on google it will give examples as you type. When I search on google with Mozilla it does not, but at a friends house it will using Mozilla and it used to do it with my older version of Mozilla.

I still have the problem although I uninstalled Mozilla (clearing the cache didn't work and neither did Word diagnostics), so have ended up thinking it could be Norton (the manual update worked x1) or Windows. Today I found an answer: disable the preview pane in Windows Explorer - there's a history of problems with this view.

Configure My DataFinder's Search Area with vbscript

Hello,
I am using the following vbscript to load data into the DIAdem Data Portal:
Set dataFinder = Navigator.ConnectDataFinder("My DataFinder")
Set queryForm = Navigator.CreateQuery(eAdvancedQuery)
queryForm.ReturnType = eSearchFile
Call queryForm.Conditions.Add (eSearchFile, "name", "=", "*.tdm")
dataFinder.Search(queryForm)
Set dataFinderResults = dataFinder.Results
Call Navigator.LoadData (dataFinderResults).
This works fine as long as the My DataFinder's Search Area has been previously defined via the DIAdem Navigator Panel.
We are starting DIAdem from a Visual C# application and the vbscript above is part of a vbscript that is passed into DIAdem when it is started via the /CScriptStart argument. I would like to dynamically set the My DataFinder's Search Area based a path argument that is also passed into DIAdem.
Is there a way to configure the My DataFinder's Search Area with vbscript?
Also,
Is there a way to have DIAdem run in the background without having the DIAdem screen flash when it is first started?
Thank you so much for any help with this,
Renette
Message Edited by rlj on 08-21-2009 06:06 PM
Solved!
Go to Solution.

Hi Renette,
As of DIAdem 11.1, newly released this past July, we now have a VBScript interface to define Search Areas and other aspects of the DataFinder. DIAdem 11.1 also has the ability to save off a DataFinder configuration file and load it, both interactively and programmatially. Earlier versions of DIAdem did not have any way to programmatically affect Search Areas.
Note that setting the Search Areas programmatically will not immediately result in all files being indexed and ready to be queried-- that may take a little time after you set the new Search Areas, depending on how many files are in each Search Area you add.
You are currently starting DIAdem with a DOS extension to have it run a VBScript right after launching. The advantage of this approach is that DAdem persists as an independent application even after the calling application ends.
You could alternatively call one of DIAdem's two ActiveX servers, which would invisibly start DIAdem and allow you to stay in contact with that DIAdem instance and read DIAdem variables and execute further DIAdem commands or VBScripts. The disadvantage of this approach is that if your calling program terminates, so does the ActiveX connection, and that shuts down the DIAdem instance launched by that ActiveX connection.
Ask if you have further questions,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

After loading the internet using Firefox AND then selecting NEWS and a delay the Error "The MSN toolbar has encountered an error. etc" occurs. Also, when browsing some searches are "REDIRECTED"!

After loading the internet using Firefox AND then selecting NEWS and a delay the Error "The MSN toolbar has encountered an error. etc" occurs. Also, when browsing some searches are "REDIRECTED"!
== This happened ==
Every time Firefox opened
== Hard to say but have been trying to diagnose for at least a week.

Original message wouldnt post with attachments - trying again....
Attachments:
secondclickheredialog.jpg ‏40 KB
FirstDialog.jpg ‏19 KB
Firstclickheredialog.jpg ‏16 KB

My entire itunes library (all music/apps etc) has dissapeared from my lap top but are still on my phone what can i do to restore?

My entire itunes library (all music/apps etc) has dissapeared from my lap top but are still on my phone what can i do to restore?
I have tried exporting without success

I have this same issu over the pass few weeks and it's getting on my nerve very badly. I've been trying to fixing and finding solutions over for weeks. This is terribly disappointing!

I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it

I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work

Hi Timia,
If you are using Safari as a web browser :-
Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
If you are using Google Chrome as the web browser :-
Open Google Chrome.
In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
In the "Search" section, select Google from the drop-down menu.
Let me know if you still experience any issue.
Regards,
Aadesh

My settings icon has dissapeared! only 6 icons fit on screen, everthing enlarged???

my settings icon has dissapeared! only 6 icons fit on screen, everthing enlarged??

'''upgrading back to the older working version'''<BR><BR>
Actually, that's called downgrading. Some icons are placed in the add-ons bar
by default. Why the powers-that-be removed it is something that none of us have
been able to figure out. Go to the
'''''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]'''''
(There’s a lot of good stuff here).
What you want to do is search for what you want. Many of us are now using
'''''[https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer (Customize Australis)]'''''<BR>
Restore squared tabs, appmenu, add-ons bar, small button view and more on Australis UI (Windows/MacOSX/Linux + Fx 29+).

ICal: january has dissapear!!!!!!

The month of janury has dissapear from iCal in both my wife's macbook and my macbook pro (which are not sincronize). The main window and the preview window would jump from dec 2007 to february 2008. I can only get to jan 08 if i change my view to weeks only. Plus all my january appointments sync froma nokie E62, show in feb 08. Anyone.... any ideas? thanks in advance!

holadi,
Welcome to Apple Discussions.
Often iCal anomalies can be rectified by refreshing the iCal plist file.
Quit iCal, and drag the com.apple.iCal.plist file which is located in your Macintosh HD/Users/yourusername/Library/Preferences Folder to the Desktop. Then log out/in or restart and check iCal for desired behavior.
Another place to check is System Preferences...>International>Formats>(Make sure that you select the correct "Region" and also the appropriate "Calendar" in "Dates." There are many other settings in that "International" Preference and I hesitate to make any more suggestions. If my suggestions do not work, it may also be helpful to look under the Language tab.
;~)

FPM_SEARCH_UIBB: Fine Tuning of the Search Area

Hello experts,
I created a search application using FPM_SEARCH_UIBB. The user should only have a fixed search area with twelve search criterias, two of them should be mandatory.
The general setup of the search area is done and works fine. But there are some nasty details I'm struggling with.
Hide + / - Signs
In IF_FPM_GUIBB_SEARCH~GET_DEFINITION I set MAX_1_VALUE to abap_true. This prevents the user from adding search critera which is already on the search area. So far so good.
But is it possible to hide the + / - signs completely? If there is a plus-sign the user will click on it. If all criterias are already on the screen the user will receive an ugly error message. So the signs should be hidden.
Make Operators Read-Only
For all search criterias only the 'is' operator i relevant. All other operators are already excluded. But in the UI the operators are still displayed as drop-down fields and the user has the possibility to open it just to see that there is only one entry in the list.
Is it possible to make the operator field read-only? Hiding it would also be an option.
Mark search fields as mandatory
As mentioned two of the search fields should be mandatory. In IF_FPM_GUIBB_SEARCH~GET_DEFINITION I set attribute mandatory = abab_true with the result that the minus signs on the right side are hidden and the label is read-only so that the attribute cannot be changed.
The check whether a value is maintained is implemented in IF_FPM_GUIBB_SEARCH~PROCESS_EVENT.
Now the question:
The search attributes are not marked with a red star as mandatory as it is standard for form UIBBs. Is there somewhere a setting to mark the attributes consistently with a star? I know that this is a minor issue but there are people who are very keen on red stars for mandatory fields.
Best regards,
Markus

Which NW release are you talking about? As of release 7.03/7.31 there is the possibility to define a result list in the GUIBB Search that is based on the new GUIBB List ATS. This offers highest flexibility to the application developer.
Edited by: Jens Ruths on Jan 23, 2012 12:36 PM

"Your server is not configured properly or your search query has ..."

Config info:
v490, 20k+users, JES 2005Q1,
118540-23
118207-42
115614-20
Brief Description:
When users select the Corporate Directory under the Address Book tab in CE and click the ALL button (or do a wildcard search) they get the following error:
"Your server is not configured properly or your search query has
exceeded the limit. Please check server configuration."
Additional info:
Additionally this error shows up when a user chooses a View: letter and clicks next for the following page, and additionally if they have the Corporate Directory set as their default address book in options.
Logs:
/sun1/dirserv/slapd-mail/logs/errors:
[11/Oct/2005:10:44:21 -0500] - WARNING<20805> - Backend Database - conn=161557 op=34 msgId=169 - search is not indexed
/sun1/dirserv/slapd-mail/logs/access:
[11/Oct/2005:10:23:21 -0500] conn=161557 op=17 msgId=124 - SRCH base="o=ualr.edu,dc=mail,dc=ualr,dc=edu" scope=2
filter="(&(&(cn=*)(|(objectClass=INETORGPERSON)(objectClass=GROUPOFUNIQUENAMES)))(objectClass=*))"
attrs="objectClass"
[11/Oct/2005:10:23:31 -0500] conn=161557 op=17 msgId=124 - RESULT err=0 tag=101 nentries=20540 etime=10 notes=U
/var/sun1/comexp/logs/uwc.log:
Oct 11, 2005 10:52:20 AM com.sun.uwc.abclient.ABInitFilter doFilter WARNING: Address Book session already set!!
changes in /var/sun1/comexp/WEB-INF/config/corp-dir/db_config.properties
lookthru_limit=30000
I have a ticket, just wondering if anyone else has this problem...

You'll be getting this in your case update (answer in response to the internal conversation we've been having about your issue)
So if they really want to control wildcard searches then they should look in the "personalstore.properties" file for the domain (default: /var/opt/SUNWuwc/WEB-INF/domain/personalstore.properties) for the value of "db.idir.wildcardsearch". Its possible settings are documented in the comments. If they wish to disable all "*" and "*x*" searches (i.e. turn off the 'All' and selecting a letter options) they should set the value to at least 2.

Firefox Black screen with see-through search area/pannel

Firefox has suddenly encountered a problem where, when I open a new window it is black with the search area see-through.
Here is a screenshot of what it looks like:
http://i.imgur.com/JDexobz.png
I've tried resetting and re-installing Firefox to no avail.
Thanks in advance for help and suggestions.

Hello proteinsheikh, to '''solve''' your issue see [https://support.mozilla.org/en-US/questions/1026093#answer-641865 philipp's Chosen Solution].
thank you

Customization in Advanced Search Area.

Hi All,
There is a requirement in advanced search area of return orders.
Based on the transaction type selected, corresponding status values has to be populated.
Here im populating the transactio type values in the drop down list box and status value i have to populate in the value help/ drop down/ F4 application, but these status values should be populated based on the transaction type we have selected.
We are working on CRM 5.0 version, and i have done few things,here im listing out the steps.
1) For the Transaction type field i have enable the Roundtrip CS search option.
2) I have created a new ABAP structure for the transaction field(ZCS_Trans_Search).
3) I have appened this abap structure to the calling F4 application (Status F4 appln)
4) implementing the IF_CRM_BSP_MODEL_ACCESS_IL_2FILL_F4_STRUCTURE and IF_CRM_BSP_MODEL_ACCESS_IL_2CHECK ACTIVE_SHUFFLER methods, but still im not able to enter in to this methods in the debug mode.
These steps i have done with the ref to PCUI COOK BOOK 5.0 version, here im copying the steps given in PCUI 5.0
5.1.3.7 Context sensitive value help
The current complex value help is not fully context sensitive. It does not consider the information
the user has already entered on the screen, If it is present in different screen position or in different
line of a list than the field on which F4 is pressed. Thus, the value help often displays result set
which are not related in the current context. To make value help context sensitive following points
must be improved.
The complex value help must consider the entries of relevant fields on the calling
applications screen as search criteria.
The value help application should be enabled to set the value in the Search-Shuffler
depending on the current context.
The application should be enabled to dynamically disable the availability of the value help
icon for a field.
To implement this feature for any field in the field group following steps to be performed:
1. New field group customizing flag is added the by checking this enables context sensitive
search for a input field. Field group customizing is called Roundtrip CS Search.
<Include the figure>
2. Determine the fields to be transferred to the value help application from calling application
and create ABAP structure from this fields.This structure is called Context sensitive
screenstructure (CS structure). Assign this CS structure to the complex value help
application which is associated with the input field. This is done in:
Transaction crmc_blueprint
Open the node Application/Layout node
Edit the value help application
Enter the name of the structure in the filed Struct. For Context-Sensitive srch. Help
(F4_CS_STRUCTURE)
3. PC-UI FW takes the CS structure data from the calling application and defaults them in the
value help applications advance search screen structure. Include this CS structure to the
advanced screen structure of value help application to have the same fields of CS structure
and add the corresponding fields for the CS structure to field group of advance search.
4. Implement IF_CRM_BSP_MODEL_ACCESS_IL_2~FILL_F4_STRUCTURE in the calling
applications Model Access Class. In this method you fill the value in CS structure which will
be passed to the value help application.
IF_CRM_BSP_MODEL_ACCESS_IL_2~FILL_F4_STRUCTURE
5. Implement / or enhance if already implemented
IF_CRM_BSP_MODEL_ACCESS_IL_2~CHECK_ACTIVE_SHUFFLER in value help
applications MAC. This step is optional, With this you will be able to select the correct
shuffler based on the context sensitive data passed with new import parameters values to
this method.
IF_CRM_BSP_MODEL_ACCESS_IL_2~ CHECK_ACTIVE_SHUFFLER.
Please do suggest me.. what are the things further i need to do..
REMEMBER: I have to do this implementation in the advance Search area.
Regards.
Anilkumar.

Hi,
As I understand, you would like to have more than 5 property filter in Advanced Search web part.
According to this article, it is one of the limitation in OOTB Advanced Search web part: "The property search doesn’t allow the users to specify more than 5 property filters." As workaround, "Reuse the OOTB Advanced Search UI’s hidden controls
that determines the search attributes (ASB_PS_…)". Please refer more information via:
http://blogs.msdn.com/b/senthilkumarmani/archive/2010/06/05/custom-advanced-search-metadata-values-pre-populated-for-user-selection.aspx
Also, I find two articles about customizing the advanced search Webpart adding custom properties in case you need:
http://vuppalasanthosh.blogspot.com/2013/03/customizing-advanced-search-webpart.html
https://waelmohamed.wordpress.com/2011/05/31/add-custom-search-properties-in-your-advanced-search-sharepoint-2010/
Regards,
Rebecca Tu
TechNet Community Support

Double click select all does not work in web site's search area after going back.

After updating from Firefox ESR v24.8.1 to v31.20 double click select all does not work in a search area after going back or searching again with the same input. It happens before clicking search icon and searching for something else double click select all does not work except it works for one word that's all.
This issue is with all new Firefox ESR and None ESR I have tried. Also the issue is on all web sites like www.softpedia.com for example.

Bugzilla has a different login system, unfortunately.

Web searches are being redirected to other sites

Web searches are being redirected to alternative websites. Deleted MacKeeper but the redirects are still occuring

There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware.
Malware is always changing to get around the defenses against it. These instructions are valid as of today, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
          com.something.daemon.plist
and
           com.something.helper.plist
Here something is a variable word, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes the word is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
          com.something.agent.plist
where the word something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
           something
where something is the same word you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
            v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Customization of Advanced Search Area

Hi All,
          There is a requirement in advanced search area of return orders.
          Based on the transaction type selected, corresponding status values has to be populated.
         Here im populating the transactio type values in the drop down list box and status value i have to populate in the value help/ drop down/ F4 application, but these status values should be populated based on the transaction type we have selected.

Wolfgang wrote:
Thanks, tst, but as you concur there is no chance to find the open, unsolved threads - only solved ones... I don't mind to first use regular search, but even the advanced options don't resolve my request...
Yes there is.
Attachments:
unsolved.PNG ‏5 KB

My search area has dissapeared on my homepage

Similar Messages

Maybe you are looking for