My search engine changed by itself and i keep getting adverts

I tried to view a video on Facebook and it wanted me to download something i wasn't prepared to do so didn't see video but now my search engine has changed from google to only search ??? and i cannot change it back it also keeps giving me an advert page everytim i look for something what can i do to stop this help

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Similar Messages

Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD, they won't let me change the permissions and I keep getting errors that say the permissions should be 0 and are 501 and having files i can't delete that

Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD, they won't let me change the permissions and I keep getting errors that say the permissions should be 0 and are 501 and having files i can't delete that go on and on ad infinitum... I think it's a virus or a corruption? Can anyone tell me or help me and let me know what I'm dealing with here or wether I'm mistaken and should leave it alone?
I'd appreciate it.
Thanks,
Matt

mattmakesvidiots wrote:
Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD
Why do you want to delete those? What have you done so far to do that?
I doubt that Mac has a virus. On the other hand, your attempts to deleted those folders may have caused corruption.
Two other comments:
1) Is there a reason that Mac hasn't been updated to OS X 10.5.8?
2) You've been misled by the poor field labeling on this Web site into trying to type your entire post into the "subject" field. In the future, just put a short summary of your post into that field.

Since the last update, whenever I close and reopen Firefox, my default search engine changes back to Google. What's going on?

Since the last update, whenever I close and reopen Firefox, my default search engine changes back to Google. I have to manually change it back to my preferred engine. Is anyone else having this problem, and if so, how can I permanently change my search provider, instead of having to manually change it again every time I start Firefox?

You can use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved
Try to delete the search.json file and possible search-metadata.json and search.sqlite files in the Firefox profile folder to reset the search engines to the default.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Firefox will rebuild the search.json file from the default search engines in the "browser\searchplugins" folder in the Firefox program folder and the searchplugins folder in the Firefox profile folder.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox

How can I fix my search engine? Google, Yahoo and Bing doesn't work.

How can I fix my search engine? Google, Yahoo and Bing doesn't work. I try to change them and they doesn't work. Its there a way to fix this problem?

Power off the router. Unplug it from the wall. Wait for few minutes.
Power off the router. Wait a while.
Connect the router back to to the wall.
Power the router back on. Wait until all lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/HT1455

DM3.0 EA2: Filter engineering changes between logical and relational model

Hi,
when I am engineering changes between logial and relational model there are some issues at filter handling for me:
- When the filter "Show Modified Objects" is activated, the filter works only on the first level, e.g. on Entity level. On attribute level all attributes are displayed, not only the attributes which have really been modified. It is possible, to show on every level only the really modified objects?
- I think, selecting a Filter condition is circuitous. All filter conditions except "Show All Objects" keeps activated when I choose another condition. So I have to deactivate "Show Deleted Objects" when I want to see only the modified objects. It is possible to choose another control element for filtering, e.g. disjunctive radio buttons?
I am running Data Modeler on Windows XP with german localization and the JDK 1.6.0_11 from Oracle SQL Developer.

I logged bug for that.
Philip

The CR 2010 for VS engine changes the margins and scales the report

The CR 2010 for VS engine changes the margins and scales the report but only when printing.
Environment:
OS: Windows 7 x64 / Windows 2008 x64
VS: VS 2010 x64
CR designer: CR 2008 SP3.5
CR engine: CR 2010 for VS SP1
We have upgraded the Crystal Reports engine from version 10 to u201CCrystal Reports 2010 for VSu201D and are now having major issues with printing reports to preprinted papers, giro forms etc. because the report margins are changed and the reports are scaled (when report elements are in non-printable area?). Reports with elements in non-printable area are shown correctly in print preview (CR 2010 CrystalReportViewer) but moved to printable area when printed. This behavior was different in CR 10. Changing the PrintLayoutSettings in code is ignored when printing.
Error u2013 The printed reports are scaled:
-     Print in the CR 2008 Designer SP2
-     CR 2010 for VS SP1
OK u2013 The reports are not scaled:
-     Print in the CR 2008 Designer SP3.5
-     Print in the CR 10 Designer
-     CR 10 engine
Test:
1) Crystal Reports Designer 2008 (with SP 3.5)
a) Create a new blank RPT file.
b) Set report margins to 0,0,0,0 in Page Setup.
c) Add a box in the upper left corner (x=0, y=0).
d) Select "Print preview" and validate that the box is located in 0,0 in preview window.
e) Select u201CPrintu201D and validate that the box is located in 0,0 of the paper. Some of the box borders might be outside of the printable area but that is ok.
2) Visual Studio 2010 and u201CCR 2010 for VSu201D with SP1:
a) Create a new Windows Forms Application project (.NET Framework 4.0). Set project to u201C.NET Framework 4.0u201D and platform target u201Cx86u201D.
b) Add the CrystalReportViewer control to Form1.
c) Add the RPT file to the CrystalReportViewer control
d) Run the application
e) Validate that the box is located in 0,0 in the CrystalReportViewer control.
f) Select the "Print" icon in the CrystalReportViewer
h) Click the "Print" button and validate that the box is moved to the printable area which is wrong.
Notice: In the print dialog (CR 2010 for VS) select the "Layout" tab page and see that "Scale u2026" is selected and cannot be changed. This is different from the CR 2008 Designer even though that it is the same report file and printer.

I have done the requested test (and more - see below) and can not reproduce the issue.
Tests done
1) Crystal Reports Designer 2008 (with SP 3.5)
a) Create a new blank RPT file.
b) Set report margins to 0,0,0,0 in Page Setup.
c) Add a box in the upper left corner (x=0, y=0).
d) Select "Print preview" and validate that the box is located in 0,0 in preview window.
e) Select u201CPrintu201D in the CR designer. Results in the box printing at 0,0 coordinate of the paper.
f) Repeat all of above with a text field report
g) Select u201CPrintu201D in the CR designer. Results in the text printing at 0,0 coordinate of the paper.
2) Visual Studio 2010 and u201CCR 2010 for VSu201D with SP1:
a) Create a new Windows Forms Application project (.NET Framework 4.0). Set project to u201C.NET Framework 4.0u201D and platform target u201Cx86u201D.
b) Add the CrystalReportViewer control to Form1.
c) Add the RPT file to the CrystalReportViewer control
d) Run the application
e) Validate that the box is located in 0,0 in the CrystalReportViewer control.
f) Select the "Print" icon in the CrystalReportViewer
g) Click the "Print" button
h) Text filed report test results in the text printing at 0,0 coordinate of the paper.
i) Box report test results in the text printing at 0,0 coordinate of the paper.
3) VS2010 IDE
a) Create a new blank RPT file.
b) Set report margins to 0,0,0,0 in Page Setup.
c) Add a box in the upper left corner (x=0, y=0).
d) Preview report in the ID designer and validate that the box is located in 0,0 in preview window.
e) Select u201CPrintu201D in the IDE designer. Results in the box printing at 0,0 coordinate of the paper.
f) Run above report in code
g) Preview report and validate that the box is located in 0,0 in preview window
h) Select the "Print" icon in the CrystalReportViewer
i) Click the "Print" button
j) Text filed report test results in the text printing at 0,0 coordinate of the paper.
k) Repeat all of above with a new report that uses a text field rather than a box.
None of my reports have the option "No Printer" checked.
All of my reports have the option "Dissociate Formatting Page Size and Printer Paper Size" checked
From the above, you can see that all of the printing tests result in consistent printing, be it a report created in CR 2008 or CRVS2010, useing a box or a field. No difference in printing.
Suggestions:
1) I am not sure if you have followed the steps you recommended. E.g.; are you creating a new report or using your existing report? See if following the steps described reproduces the issue (it may be there is something specific to your existing reports)
2) Make sure you have the latest printer driver available for your printer
3) Try a different printer
4) Add a report to the VS2010 IDE and preview the report in the IDE of VS2010
5) Compare the "No Printer" and "Dissociate Formatting Page Size and Printer Paper Size" options
6) Consider creating a phone case so a support technician can troubleshoot the issue with you
- Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

I suddenly have BING as my search engine. I checked my settings and Google is my search engine. I can't seem to get rid of this BING any suggestions?

I suddenly have BING as my search engine. I checked my settings and Google is my search engine. I can’t seem to get rid of this BING any suggestions on getting rid of it and getting back to Google?

Hello
I did remove Bing from the drop down menu, but it is still in Firefox as main search engine. I also did a back up and restore. Nothing has worked so far. I read a post that people were able to delete Bing from Explorer. I guess using Explorer will be my last resort.

Using Yosemite My incoming mail server changes by itself and means I can't access my email. When I go to preferences the new incoming mail server is greyed out. I then have to remove the accounts and get new ones.

Using Mail with Yosemite 10.10.2.The incoming mail server keeps changing by itself and means I can't access my mail. I go to preferences and find that the new incoming server is greyed out . I then have to remove the accounts and then add them again with the correct server. The incoming server which is greyed out is imap.gmail.com

Try Mail/Preferences/Accounts - select the account, then go to Advanced and deselect "Automatically detect and maintain account settings".

Have search engine set to google but yahoo keeps coming up

have search engine set to google but yahoo keeps coming up?

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

I have mac osx 10.6.8 and I keep getting update notices that do nothing, just search for update server. Happens every day. What can you or I do to fix this?

I have mac osx 10.6.8 and I keep getting update notices that do nothing, just search for update server. Happens every day. What can you or I do to fix this? Other people I work with and use macs have the same issue.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

I am attempting to change my country from US to Canada and I keep getting that the newtork is refused and I am unable to redeem Canadian gift cards. Please help?

I am attempting to change the country fro US to Canada and I keep getting that the network is refused??? hence unable to redeem Canadian gift cards. Please help.

Is your iTunes account address, and other payment method(s) ((if applicable) associated with Canada? They have to be to use that Store.

I set my preference to "Google" on the default engine and I keep getting Yahoo. How do I remove yahoo?

I set my preference to "Google" on the default engine and I keep getting Yahoo. How do I remove yahoo?

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

My Ipad air continue to see error 4005, 4013, or 4014 when I try to restore . Although I did all the instructions in the help page , and I changed many computers and I still get same errors . Please help.

My Ipad air continue to see error 4005, 4013, or 4014 when I try to restore . Although I did all the instructions in the help page , and I changed many computers and I still get same errors . Please help.
Ipad air crushes and stuck in loop of apple logo then blue screen.

If you get the same errors on different computer and with different computers then contact Apple : iOS: Restore errors 4005, 4013, and 4014 :
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.

I have a Canon MP990 and i keep getting an eror code. I have searched for a driver update but cannot seem to find one- Any ideas please?

I have a Canon MP990 and I keep getting a communication error code 306A. I have tried the usual turning everything off and starting again all to no avail. I have searched for a driver update but cannot seem to find one- Any ideas please?

Hi Peter!
I'm sorry to read that you are having issues with your Sync account.
Your best bet is to follow the steps described in this blogposts and open a bug:
https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/
After that, if you don't want to user Sync in your computer, you can stop it with this simple steps:
* At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options.
* Once the options window opens, click on the Sync tab.
* At the bottom of the Sync tab click on '''Deactivate this Device''' link

HT201272 I changed my billing info and I keep getting the message to contact support itunes/ww/. I don't know why I have used this card before help

I changed my billing info and I keep getting the message to contact support itunes/ww/. I don't know why I have used this card before help

Well, unfortunately, we don't know why either. You need to contact iTunes support at the link you were provided to find out....
Sorry,
GB

My search engine changed by itself and i keep getting adverts

Similar Messages

Maybe you are looking for