My security code is not working. how do i get a new one or fix the old?

From my laptop I am trying to sync my new desktop.
I have my KEY, which I had copied, into the documents, but every time I try to use it, I get a statement that it is incorrect and I should go to the my new desktop and get the KEY.
How can my new desktop have a KEY when it is not even part of the sync yet?
When I did look for it there was not place that I could see that would provide a new KEY number.
Both my laptop and new desktop are running Windows 8. My laptop is touch screen, but my desktop is still mouse run.
Thanks for any help you can provide,
Don

Hi 1Donald,
To answer your question, ''"How can my new desktop have a KEY when it is not even part of the sync yet?"''
You need to get the key from the new device and enter it into the old device. So on the old device select "Pair a device" and the place to enter the key will show up.
I hope this helps.

Similar Messages

  • I forgot my password for my apple ID. Any ideas on how to put in a new one without knowing the old one?

    I forgot my password for my Apple ID. Anyone have a solution on how to put in a new one without knowing the old one?
    Thanks

    Welcome to Apple Support Communities
    You have to reset your password. You can do this in this site > http://iforgot.apple.com

  • My security questions email has expired how do i get a new one

    my security questions email has expired how do i get a new one

    Click here for information. If you can't reset it through the method described in that article or by sending yourself a rescue email(it requires correctly answering two of the questions), contact the iTunes Store staff via the link in the 'Additional Information' section.
    (112110)

  • My one to one activation code is not working, how can I get it to work

    I am trying to activate my membership for one to one, however after many  attempts, it states it is not valid. What should I do?
    Svetlana

    Hi @twilat,
    Welcome to the HP Forums!
    I understand that you scanner bulb is to low with your HP Officejet J4680, on Windows 8.1. I am happy to look into this for you!
    Some questions for you, if you do not mind:
    Are you able to place a sheet of paper on the scanner glass and make a copy of it? Or does the printer provide the same error message?
    Is the printer plugged into a surge protector? Or Directly into the wall outlet? Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    If you make a copy and lift the scanner lid, do you see the light bulb come on, and the scanner bar moving?
    Thank you for posting, and hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Iphone not working properly, can i get a new one for free if this is the first time it's happened?

    The other night I went to a friend's house and my phone was sitting on the table.  Someone bumped into the table, causing a drink to spill all over my iPhone 4S.  Now, the volume buttons and the volume itself no longer works.  As well as my speaker phone, it's very quiet and fuzzy.  All my ringtones and notifications are extremely quiet and fuzzy as well.  This is my first iPhone ever, and was wondering that since it's my first and I've never ruined any other ones...would the Apple store provide me a new phone for free and be able to transfer all my data to the new phone?

    Warranty does not cover user damage.
    If you have AppleCare+,  you can get it replaced for $49US.
    Otherwise it is $199US to get it replaced.

  • HT1491 I purchased an application from the app store and the app is not working,How do I get  a refund ?

    I purchased an application from the app store and the app is not working,How do I get  a refund ?

    First, contact the developer of the app and ask for assistance. Then if you cannot get the problem resolved, go to the following link, explain the reason for your request, including that the developer was unable to solve the problem, and ask:
    http://www.apple.com/support/itunes/contact.html
    Though a refund is not guaranteed, it's possible they'll make an exception for you.
    Good luck.

  • My iPad with this security code and forgot it,how can I get him ?  Is that 4 digit code

    my iPad with this security code and forgot it,how can I get him ?  Is that 4 digit code.

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • My app store account payment security code is not letting me download and get apps

    My app store account payment security code is not letting me download and get apps

    We'll need more details than just "not working". What exactly happens when you try to download an app?

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • I upgraded to the 4.3.5, and half my apps are not working. how do i get back to 4.3.3?

    i upgraded to the 4.3.5, and half my apps are not working. how do i get back to 4.3.3? all my best and regular apps are not working and i need them! so how do i down grade

    There is no legitimate (Apple supported) way to downgrad an iOS on a device.  Have you tried downloading/installing a new (free) app.  That works for many users with that problem.

  • PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a yhearÉ

    PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a year nowÉ

    Thanks for the quick response ...
    I had already tried deleting the review slide itself, though Captivate wouldn't let me - it just hid it. I tried again using the method you recommended but the slide remained in the filmstrip, so I tried deleting again, then re-added it from the Quiz Settings page ... no joy, same behavior as before.
    I checked the Advanced Interaction page and confirmed that all of the scored questions were configuredthe same way as the non-scored questions, with the only difference being the pool that they were drawing from.
    Other thoughts? I am by no means a Captivate expert but this one really feels like it shouldn't be this hard, and I'm more than a little afraid that it's the file itself that's jacked up ...

  • My App dose not work, how do I get my money back?

    I purchased a Game Pad Companion App and dose not work, how do I get my money back?

    Have you first contacted the maker of the maker of the application?
    You can contact Apple here for Mac App store purchases.
    -> http://www.apple.com/support/mac/app-store/applications/

  • Accelerometer is not working how do i get it repaired ?

    accelerometer is not working how do i get it repaired ?

    Just reset!(no data will be lost)
    Turn of device.
    Hold home and power on/off button until apple logo appears.
    Should be fixed. If not-
    Backup and restore your device.
    Hopes tis helps!

  • When I use Home sharing, I can see the library I want to copy, but when I highlight the library, the import button does not show up. Also, it will not let me drop and drag. How do I get music from one computer to the other computer?

    When I use Home Sharing, I can see the library I want to copy under Shared, but I can't get it save on the computer under the regular library. I go to edit and "select all" but there is no import button that is in the right hand corner. Also, it will not let me click and drag the music. How do I get it from one computer to the other?

    Since both computers are connected via the network, you could simply copy the ENTIRE iTunes folder from one computer to another via the network.
    If both computers are running Windows, use the Easy File Transfer Utility built into Windows to move iTunes and all other user media/data.

  • The g, h and backspace on my keyboard are not working even after replacing with a new one.

    The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
    ...am waiting for a QIUCK RESPONSE

    How does a usb keyboard attached externally work?
    You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too. 

Maybe you are looking for

  • Error while executing a report  in BI 7.0

    Hello Friends, My BI7.0 system  is a fresh installation. I  have  created a query using Nw2004s Bi Frontend-Bex Query Designer. After saving the changes when I click on Execute Button (in between Saveall & Check buttons) I am getting an error in the

  • Custom Adaptor Module on Soap Receiver

    Hi All, In PI 7.1.1 I have a soap receiver communication channel with a call to a simple custom adaptor module before and after the call to the XISoapAdaptorBean The call before works displaying the message in the call. It seems that the module is no

  • Matshita Dvd-r UJ-868 replacement

    I have a Macbook Pro 5, 3 with a Matshita UJ-868 dvd-r drive.  The drive started making noise a month ago and then I tried to stick a real cd into it and it will not read it or anything I put in it.  So since my warranty is up I just want to buy a re

  • Can LMS 3.2 manage cisco SM-ES3-24-P which is a switch/router module inserted into a 3945 Router?

    LMS 3.2 on Solaris 10 LMS properly manages our 3950 routers, but we recently installed a cisco SM-ES3-24-P (PowerPC405) processor. This is managed via it's own IP address. I recently added this to our LMS system and ran an update inventory job. The j

  • SAles related query

    If i want to sell only particular quantity of material to a customer (say 100 pieces/month), can i control that functionality with condition update?, till now i know the functionality of condition update is, it can be used for specific price or say d