My send messages are not being captured. Matt said to right click the folder, etc. What folder? Where?

Only the subject shows up above the line. MattAuSupport said to right click the folder, select properties and repair. But what folder are you talking about? Where will I find it?

To answer your question, it would be the folder that you are complaining about. So back to you, What folder are you having problems with? The Sent folder? Then that would be the one to right click to repair.
It is kind of like flat tires. You repair the one the air came out of.

Similar Messages

  • My send messages are not being captured. all you see is the subject line.

    After February 27, it seems that Thunderbird is not capturing my Sent messages. You can see the subject in the list above the line, but nothing shows up below it. If I put it in Trash, I still can't see it.
    I have another mailbox on this computer, and it's working fine.
    It's an old Mac (G4) running an ancient system, 10.3.9, and that supports Thunderbird 2.0.0.23
    Yes, I know it's an antique, but we need to fix it right now. Please help.

    It was the icon after all, and it finally worked. I think I had to clean out some of my sent mail and compact the folders first. Thank you very much.

  • My text messages are not being delivered

    MY text messages are not being delivered. Keep coming back with the red saying "Not Delivered". Anyone know why this all of a sudden started happening and how to fix it?

    Thank You Meg St._Clair contacted my carrier and fixed the problem on my iPhone 6 but still an issue on my iPad mini  
    Carrier could not fix the problem so said I would have to plug my iPad into my Mac and back it up and then restore factory settings        
    Havent done any of that yet!

  • Messages are not being saved on N96

    On my N96 I have set save sent messages and receive report as 'yes' but after updating firmware (20.050) messages are not being saved.Is there any solution to someone.

    I have exactly the same problem with my N95 but I can't really say when it started. Suddenly I just noticed my phone didn't save sent messages anymore and hadn't done it for some time, but can't really tell after what it started to occur. Really strange problem, not even reseting back to factory settings helped - after I put "receive report" option back it stops saving sent messages to sent folder. Actually if I go to "sent" folder quickly after sending the sms, it shows there for little moment before disappears. Really strange. I couldn't google any other information about this problem than this topic.

  • HT4623 My messages are not being sent. Can someone help?

    My messages are not being sent. Can someone help?

    Alan, how you're doing?
    You already know issue is not with the email account, since it's working on another devices.
    Now you have to define whether it is a user specific or system wide issue.
    Create another user account through system prefereces > users and groups. Try to set up account on the new test user.
    If it works, get back to your main account, open mail application, go to menu > Window > open activity and connection doctor (Make sure you organize these tools in a way that allows you to see both mail windows and activity/ connection doctor... Now, try to send a test email and you will see where the issue is.
    Then...
    Go to mail preferences > select your email account > click the - button to remove it and + to readd account.
    Fill your full name, email address and password. Now, hold down option key and press continue... Insert incoming and outgoing information.
    Any doubts, feel free to ask.

  • Since upgrading to iOS7 some text messages are not being sent, iMessage on my Ipad and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things

    Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?

    Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!

  • I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    Back up all data. Rebuild the mailbox.

  • Read and deleted messages are not being updated on my iphone 4s

    I have a new user who is having a synchronization issue with his iPhone.  When he reads emails on his desktop, the messages on his iPhone 4s show as being unread.  Also, when he delets messages on his desktop email, messages are not being deleted on his iPhone.  I have never seen this issue before and do not know what to do.  Please help.  Thank you!

    The end user just started with the company a week ago and he is using Outlook 2010.  We never had this issue in the past.  Active sync has been enabled on user’s account and he was able to configure the firm's Exchange email profile on his iPhone.  Although he is able to receive messages on his mobile device, it does not sync with his desktop email.  I asked him to delete the profile on the device and create it again, but he wants to do that as a last option.

  • OHS - Protocol (Periodic) Next due dates are not being captured properly

    Protocol (Periodic) Next due dates are not being captured properly in the Planning Cockpit (EHSH_D_PCP) report nor the Protocol report (S_SH8_7200013).  The Planned date is not resetting itself for the medical service sometimes.
    Any idea what might be causing this issue?
    Regards
    Naveen

    HI Naveen
    Have you overridden the std BADI for calculating Next due date?
    Thanks
    Jagdsh

  • I've set up my Gmail account to auto forward messages to iCloud Mail but message are not being received. Can anyone help?

    I've set up my Gmail account to auto forward messages to iCloud Mail but message are not being received in iCloud Mail.
    Can anyone help?

    Try this out...  this worked like a charm:
    *On a desktop PC, log into your gmail account.
    *Click the gear up in the top right corner > Settings
    *Click Accounts
    *Under "Change Account Settings", click "Other Goole Account Settings"
    *Along the left, click "Security"
    *Under 2-step verification, click "Manage your application specific passwords"
    *It will ask for your usual gmail account password and take you to a page that says "
    Authorized Access to your Google Account
    *You will see a box to type in something (I just typed in iPad) then click "Generate Password"
    *It will generate a random password for you...  you will need this password Once in your iPad....
    Now...
    *Go to your iPhone Settings>Mail, Contacts, Calendars>Add Account>Google
    *Type in your name, your usual gmail email address and for the password, type in that random one generated on your PC
    It should work from there, if not follow what is below!
    *On a desktop PC, log into your gmail account.
    *Click the gear up in the top right corner > Settings
    *Click Accounts
    *Under "Change Account Settings", click "Other Goole Account Settings"
    *Along the left, click "Security"
    *Under 2-step verification, click "Manage your application specific passwords"
    *It will ask for your usual gmail account password and take you to a page that says "
    Authorized Access to your Google Account
    *You will see a box to type in something (I just typed in iPad) then click "Generate Password"
    *It will generate a random password for you...  you will need this password THREE TIMES in your phone or ipad....
    Now...
    *Go to your iPhone Settings>Mail, Contacts, Calendars>Add Account>Other>add mail account
    *Type in your name, your usual gmail email address and for the password, type in that random one generated on your PC
    *Next
    Incoming Mail Server:
    Host Name: imap.gmail.com
    User name: (your gmail email address)
    Password: TYPE IN THAT RANDOM PASSWORD AGAIN
    Outgoing Mail Server:
    Host name: smtp.gmal.com
    User name (your gmail email address)
    Password: TYPE IN THAT RANDOM PASSWORD AGAIN
    Done
    And allll the emails came rushing in   Hope this works for you!

  • My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

    My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

    Hello transcend94,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    iTunes: Understanding iTunes Media Organization
    http://support.apple.com/kb/ht3847
    Avoid using different versions of iTunes, or you may be unable to locate content, or may import or transfer content to the wrong location.
    Best of luck,
    Mario

  • My outgoing messages are not being saved in my sent folder

    Half of my message that I try to send are not being saved in my sent folder. This is a huge problem causing lost documentation and copies of information and conversations I have had. The error message I get says that thunderbird was unable to save to my sent folder and asks if I would like to try again. If I say yes I get the same message over and over again until I give up and let the message be lost to cyberspace. What can I do to fix this issue and stop loosing valuable information for work?
    I am using an HP laptop running windows 8.

    What protocol is your email account using (POP or IMAP)?
    If POP, you need to make sure your local disk space is enough to save the sent messages. Check where the copies are located by looking at the account settings under '''Copies & Folders'''. When using POP, I believe a copy needs to be saved on both sides: local and server.
    If IMAP, the email server is where such copies are saved. You can also double-check such settings as mentioned above.
    Finally, if your emails are too big, this may be a restriction of your email provider, perhaps get in touch with their support and inquire about this to rule it out as the cause of the problem. Could you share more details about the kind of emails that fail to have a local copy saved or is it for each and every email?

  • Problem in ABAP Proxy(sometimes XML Messages are not being created)

    Hi,
    I am trying to send the data from ECC to CRM when post goods issue is done for a delivery from ECC side. I called my proxy method in BADI : DELIVERY_PUBLISH.
    And after calling the method, I used commit work also.
    But the problem is, some times it is working fine. and some times the XML messages are not getting created. When I go in debug, looks everything is fine.
    I am unable to understand why this inconsistency.
    Could you please help me out, do I need to take any more precautions.
    Thanks,
    Sandeep

    You mean you can't find any message in SXMB_MONI of your ECC or is it XI where you can't see message?
    If you have not checked in SXMB_MONI of ECC then may be messages are created but they are going into error and that's why you are not able to see any message in XI.

  • My instant messages are not being recognized after update

    After I did the latest update, some of my instant message are not coming up with the person's name from my contacts, rather, just the phone number is showing up.

    Try resetting the SMC and pram
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    To reset PRAM/NVRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Messages are not being dequed by a different connection in JMS

    Scenario
    There are 2 queues - Q_A and Q_B and There are 2 applications - App_1 and App_2
    I am using point 2 point and java JMS
    This is what I want to accomplish
    App_1 queues messages to Q_A
    App_2 dequeues messages from Q_A
    App_2 queues messages to Q_B
    App_1 dequeues messages from Q_B
    But the problem I am having is that neither application can see the messages that have been queued by the other.
    So even though I see the messages in the database in Q_A,
    When I use QueueBrowser from App_B on Q_A to view the messages ... it is empty
    But if I use QueueBrowser from App_A on the same queue Q_ A I can see the messages.
    The same is true the other way round.
    The queueconnection is being created usng the same db user in both apps, and the queues are owned by the same user.
    please help me.
    user489532

    Dear DAMORGAN,
    Thank you for your reply and I apologise for the insufficient information. I am providing the details now. I am aware that JMS is supposed to handle my situation. And I am ableto queue and dequeue messages without problems from the same app. Its only when I am using different apps that I am having a problem. I am pasting relevant pieces of code,Please let me know if more info is needed. Thank for your help.
    Oracle 10g
    Weblogic 10
    DDL to create Queue
    BEGIN
    DBMS_AQADM.CREATE_QUEUE_TABLE (
    QUEUE_TABLE => 'AQ_A_QUEUE'
    ,QUEUE_PAYLOAD_TYPE => 'SYS.AQ$_JMS_OBJECT_MESSAGE'
    ,COMPATIBLE => '8.1.3'
    ,MULTIPLE_CONSUMERS => FALSE
    DBMS_AQADM.CREATE_QUEUE(QUEUE_NAME => 'A_QUEUE',
              QUEUE_TABLE => 'AQ_A_QUEUE',
              MAX_RETRIES => 10,
              RETRY_DELAY => 60);
    DBMS_AQADM.START_QUEUE(QUEUE_NAME => 'A_QUEUE');          
    END;
    Application A sends messages to A_QUEUE like this
    //This is how I get a connection
    QueueConnectionFactory queueConnectionFactory = AQjmsFactory.getQueueConnectionFactory(getDatabaseServer(), getDatabaseSid(), getDatabasePort(), "thin");
    QueueConnection qc = queueConnectionFactory.createQueueConnection(getDatabaseUser(), getDatabaseUserPassword());
    qc.start();
    //This is how I get the Queue          
    QueueSession q_sess = qc.createQueueSession(true, Session.AUTO_ACKNOWLEDGE);
    Queue aQueue= ((AQjmsSession)q_sess).getQueue(getDatabaseUser(), "A_QUEUE");
    TestMsgObject jmsObj = new TestMsgObject();
    //populate Test object          
    QueueSender qs = q_sess.createSender(aQueue )
    ObjectMessage msg = q_sess.createObjectMessage(jmsObj);
    msg.setStringProperty("MESSAGESOURCE", "APP_A");
    qs.send(msg);
    qs.close();
    q_sess.commit();
    //Application B has a message listener like this - TestListener
    public void initialize() throws JMSException, NamingException {
         QueueConnectionFactory queueConnectionFactory = AQjmsFactory.getQueueConnectionFactory(getDatabaseServer(), getDatabaseSid(), getDatabasePort(), "thin");
         qc = queueConnectionFactory.createQueueConnection(getDatabaseUser(), getDatabaseUserPassword());
         q_session = qc.createQueueSession(true, Session.AUTO_ACKNOWLEDGE);
         aQueue = ((AQjmsSession)q_session).getQueue(getDatabaseUser(), "A_QUEUE");
         qr = q_session.createReceiver(aQueue);
         qr.setMessageListener(this);
         qc.start();
    public void onMessage(Message message) {
         try {
              System.out.println("Received Message XFS=" + message.getJMSMessageID());
              //more processing
         }catch(Exception e) {
              e.printStackTrace();
    The message listener is created and initialized from the init() method of a servlet that is loaded on startup.
    The onMessage of the TestListener is never called.
    I can see the messages in the database.
    Also when I call the following code snippet from Application A - the messages are retrieved, but the same code called from application B does not give any messages.
    browser = q_sess.createBrowser(MyUtil.getQueue(q_sess));
    for (Enumeration messages = browser.getEnumeration(); messages.hasMoreElements() ;){
    obj_message = (ObjectMessage)messages.nextElement();
    System.out.println(obj_message.getJMSMessageID());
    I can bounce the app server and still app B does not see the messages.
    However if app B publishes messages to the queue itself, it can see those, without any problem.
    As mentioned before the database user is the same for both the apps and owns the queue, and deques and enque are both enabled.

Maybe you are looking for

  • How to make plant mandatory field in Sales order thru standard SAP process

    Hello, There is requirement in business that User wants to make plant field Mandatory in Sales order line item once material number is entered. Can you please guide me how I can make Plant field mandatory thru Standard SAP process. I had checked it t

  • Copy text: acrobat 9 pro vs X pro

    Dear people, Something strange is driving me to the edge of total frustration. I have a unsecured PDF. With text. Bold and not bold. Simple, you would think. On my personal iMac i have acrobat 9 pro. I copy. I past in word. Everything is fine. 1 font

  • ALC-DSC-000-000: while invoke LDAPquery process

    Hello There, I got the below error while trying to invoke the LDAP query process, does any one have this problem or know how to fix, please advise. "ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error." I did a search on Adobe site

  • Title bar icon

    Can the small icon at the top of a Vi window be customized? Or are we stuck with the labview default icon as free advertisement for NI a client would like their own logo there. -Paul Paul Falkenstein Coleman Technologies Inc. CLA, CPI, AIA-Vision Lab

  • Feed BI with multiple ECC

    Hello, I am new with BI so excuse me if my question seems easy. I know that BI can only get one client. What we plan is to feed BI with the data of 2 different ECC systems. Is it possible ? Do we need to do a special configuration inside BI ? How can