My sent email from Feb 1 2014 on has disappeared, when I send mail now it isn't saved. What has caused this, how do I fix it, can I retrieve lost mail?

as above
I dont think I have done anything to change the settings, it just started late last week

Are you using POP3 or IMAP
Check your Syncronization Settings
Thunderbird > Tools > Account Settings
*Choose your email "[email protected]" > Synchronization & Storage > Disk Space
**Choose [x] Synchronize all message locally regardless of age
**Choose [x] Don't delete any message

Similar Messages

  • I have an iMac and under devices in the sidebar that name has changed from iMac to iMac(1) to iMac(2)...and is now at iMac(9).  What is causing this and how do I correct it?

    I have an iMac and under devices in the sidebar that name has changed from iMac to iMac(1) to iMac(2)...and is now at iMac(9).  What is causing this and how do I correct it?

    Sometimes this message means that you have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
    Sometimes it happens because a device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
    A third-party wireless router that has incompatible settings or firmware may be the cause. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
    Rename the computer in the Sharing preference pane.

  • Xfer sent emails from droid to sent mail folder on PC

    Can I/How do I transfer sent emails from my droid to my PCs sent mail folders (or Gmail's or Outlook's)? I send lots of email on-the-go and want to keep a record of them with my other emails.  Thanks!

    This depends on which account you are talk about... The gMail account should automatically sync the sent items from your device but some accounts wont allow sync of all folders and the only way without a third party app is to send a CC to yourself when you sent the messages.

  • How do I specify the gmail outgoing server if I have multiple gmail accounts in my mail? I have 2 business accounts and when I send mail from one account, it is sent from the other account and the sending email is not from the correct account.

    I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!

    In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account.  The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
    Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
    Ernie

  • How do I delete ALL my sent emails from my iPad at once?

    How do I delete ALL my sent emails from my iPad at once? I can do the inbox but not the sent.

    There is no built in way to do this in iOS. If this trick doesn't work for you, then it can't be done.
    http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/

  • How do I delete a incorrect email address I typed in a sent email from the suggested email list when I start typing again?

    How do I delete a incorrect email address I typed in a sent email from the suggested email address list when I start typing again?

    You can't. There is no way to eliminate those remembered addresses in the mail app. Eventually if you keep ignoring that address it will go away, but it can take some time before it disappears. The only way that you can eliminate now, is by restoring the iPad to factory settings and that's pretty radical just to get rid of a mistyped email address - IMO anyway.

  • I want to syc my email with work outlook so sent emails from Ipad store in my outlook out box any advice

    I am trying to syc my Ipad with my outlook at work so any sent email from IPad stores in sent box of outlook... i have been told it can be done

    talk to your work's IT department. Find out if their policies allow you to do this, then they can give you all the settings.
    If they don't, then you can look into if your work has webmail and access your mail via the internet

  • Where can i find the sent emails from iphoto?

    Sending emails from iphoto works.
    But where can i find the history of my sent emails from iphoto. I can´t find it in mail.
    Thanks for help!

    iPhoto and Mail are two entirely separate apps, so Mail keeps no record of what iPhoto does and vice versa.
    iPhoto's mail feature is aimed at folks who use web mail generally, and who wanted templates. It's a handy way to send photos to Grandma, it's not an email client. It doesn't have a history or sent mail box.
    Workarounds:
    You can set iPhoto to bcc yourself automatically
    or
    Use Mail. It has templates too, and more of them.

  • Restoring sent email from IMAP account using Time Machine backup

    I see others are having trouble with sent mail after Snow Leopard upgrades, but I think I have a different issue.
    After my domain host's most recent 12-hour downtime, I shifted my domain's email hosting to Google. Everything's working fine sending and receiving, but now I'm missing a year's worth of sent email from that account. It's all backed up on Time Machine, but I'm looking for advice on how to restore the backed up sent mail from Time Machine while preserving the couple of weeks' worth of sent email that's in the Mail app's sent box for that account now.
    Thanks!

    Sorry for the lag time closing this question out. I eventually shut everything down, including the external hard drive, spun everything back up and tried again. (I had been on the correct, earlier backup file and not on the current day, which was why the grayed out restore button was so disconcerting.)
    The second attempt worked, but it took two or three tries to retrieve all the sent emails. The first two outings only recovered about 10 days' worth despite having months of sent email selected and available to recover. The third time it grudgingly worked correctly.
    The whole experience has left me very wary about Time Machine, frankly. I do thank everyone for their help. I'll post this note in the other forum and so there's a resolution to bot

  • HT201269 How can i transfer sent email from my old iphone to the new one?

    Trying to figure out how to transfer sent email from my old iphone 4 to my new iphone 5s.  Anyone have any idea?

    If you have a POP account, this will not happen. If you have an IMAP or Exchange account signing in as the other poster stated will work. So, it depends on what type of account you have.

  • Why can't i see my sent emails from my ipod touch on my mac and vice versa

    why can't i see my sent emails from my ipod touch on my mac and vice versa

    i have a POP3 account.
    thanks

  • HT1349 Since I switch to iCloud, I cannot sent emails from my iPhone. Any quick help? I don't have time to go through the Apple web of "Solutions" thanks in advance! Anyone! Thanks.

    Since I switched to iCloud, I cannot sent emails from my iPhone. Any quick help? I don't have time to go through the Apple web of "Solutions" thanks in advance! Anyone! Thanks.

    You can't send emails? Do you receive an error message when you try to send them? Have you done ANY troubleshooting on the device at all? If you don't have time to try things yourself, it will almost certainly take longer to try it in here.

  • I can't sent email from my ipod touch

    i can't sent emails from my ipod touch

    If the photos were synced to the iPod you have to unsync them. Unsyncing is also covered here
    Sync photos to your iPhone, iPad, and iPod touch in iTunes - Apple Support

  • Why can't I see sent emails from my laptop on my iPhone?

    Why can't I see sent emails from my laptop on my iPhone?

    I think that may be the problem.
    http://support.apple.com/kb/HT4759

  • Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

    Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send. 
    Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
    Scenario: I have below configuration of exchange 2010 server Setup:
    1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
    Server Name: WDC2010
    Domain: Blazex.Com
    2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Hub/Client Access Exchange role servers.
    Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Hub and Client Access Server.
    3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Mailbox Exchange role servers.
    Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Mailbox Server.
    4. 2nd  Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Mailbox Exchange role servers.
    Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Mailbox Server.
    5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
    Workstation Name: WIN7.blazex.com
    Role: Workstation
    Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send. 
    Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
    I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010).  I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
    Can someone please help me on this?
    Thanks and Regards
    Shambhu

    Hi Subhash,
    I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
    Below are the questions's answers which was asked by you:
    1.     Please check whether you can send email via Outlook.
    I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
    2.     Please run EXBPA to have a health scan.
    I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
    a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
    b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
    c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
    d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
    e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
    The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
    3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
    I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
    4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
    I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
    a) Rebooted the Workstation
    b) Login successfully with same user.
    c) Delete the Old MS Outlook Profile
    d) Create New profile for same user without any problem.
    e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
    f) Open the OWA successfully for Same user.
    g) Tried to send mail but again mail went to Drafts Folder.
    5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
    mailbox via OWA to test the issue.
    I tried you suggested option, but sorry it also couldn't help.
    6.  You also check your disk space.
         All Servers have Enough Disk Space. Check the EXBPA Report.
    7. You may run EXTRA to get log information for further troubleshooting.
      Need more time for this.
    8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
       I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
       a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
       b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
       c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
       d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
       e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
       f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
    There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
    I hope my answer will give you some clue and I expect more help from your side.
    With Best Regards
    Shambhu Sharma

Maybe you are looking for

  • Journal tables in SQL Developer Data Modeler

    In my database I use journal tables, which can be generated automatically by Oracle Designer. Now that I'm trying to start using SQL Developer Data Modeler, I can't find how to make journal tables with it. Does anyone know whether Data Modeler suppor

  • Project Files & Saving

    There is often confusion between Saving a Project and Exporting/Sharing a Video from that Project. Let’s look at what a Project file is. In PrE, this is a .PREL file. In PrPro, it’s a .PRPROJ file. These are just XML database files, that define the P

  • Nm-openvpn broken

    Hello, The good-old workaround still applies to launch vpn: ~/$ killall nm-applet; killall gnome-shell; sh -c 'nm-applet &'; gnome-shell &[1] 8946 But since yesterday's pacman -Syu (or even one earlier from pacman.log): [2012-11-02 21:51] upgraded op

  • Add Fragments in runtime

    Hello There, Is it possible to add "Fragments" to PDF dynamically at runtime (Using JS)? I have couple of fragments and i want to assemble it in sigle page in particular order. For example: I have three different fragments and the result order can be

  • I cannot change a file, security?

    Hi there; I'm running CS5 and have an illustration open that I created last year (just your basic vector drawing) but I cannot make changes to it. It appears to have security implemented so I cannot access. My cursor turns into a 'no' symbol superimp