My sequence settings have changed - inexplicably

I have loaded up a project i was working on yesterday and i can't understand why but my sequence settings appear to have changed from what they were initially set to.
They should be and were:
Frame size: HD 1440 x 1080 (16:9)
Pixel Aspect Ratio: HD (1440x1080)
Field Dominance: Upper (Odd)
Compressor: DVCPRO HD 1080i50.
Now they are:
Frame size: 720x576 CCIR 601 / DV PAL (5:4)
Pixel Aspect Ratio: PAL - CCIR 601 (720x576)
Field Dominance: Lower (Even)
Compressor: DV - PAL
So now in effect I have HD footage on an SD anamorphic timeline. When I change the settings to the correct ones, it stretches and shrinks the footage.
How do I correct this without having to recut the whole thing?
Thanks
Jeremy

Zak Ray wrote:
Reset the settings to what they should be. Then go to a single clip, and reset it's Basic Motion and Distortion in the Motion tab of the Viewer. Copy this clip, select all of your other clips, right-click, choose "Paste Attributes", and check Basic Motion and Distort.
An even faster way to do it: select all in the timeline, then command option v. Then tick the Distot and Basic Motion checkmarks and press OK.
Note that any changes you've made in Basic Motion and Distort on your clips already will be lost (i.e. a "Ken Burns" pan/zoom on a shot or image).
Correct. Also for the workflow I sugested
Not sure if there's a way to do it without losing that information, maybe someone else will pipe up.
No. that is not possible. Both methods will reset all those information and you'll need to redo them.
Rienk

Similar Messages

  • I have an IPhone 3; when i checked my messages earlier some had been deleted. Upon looking at the settings i noticed my message settings have changed! I no longer have the option of how long to keep my SMS messages etc. Can anyone help?

    I have an IPhone 3; when i checked my messages earlier some had been deleted. Upon looking at the settings i noticed my message settings have changed! I no longer have the option of how long to keep my SMS messages etc. Can anyone help?

    The iOS settings for the iPhone 3 never had an option to determine how long you wanted to save messages. That settings is new to iOS8. As far as some being deleted, there is nothing about the phone that should delete messages without some user intervention. Try a reset on the phone, this will not affect your data. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.

  • My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard).  I have no idea what settings have changed or what to check.  Any ideas?!

    My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard).  I have no idea what settings have changed or what to check.  Any ideas?!

    It could be a number of keyboard shortcuts, here's a few.
    If the screen is zoomed,  hold CNTL and scroll down with mouse or trackpad.
    If screen looks like a negative,  hold down CNTL OPT CMD and click 8.
    Let us know how what other symptoms are shown.
    Regards,
    Captfred

  • I am having trouble connecting to my wireless internet. I keep getting message that my network configuration settings have changed. Ive been advised that i need to change settings to look for dynamic ip address ?

    I am having trouble connecting to my wireless internet and am getting the message that my network configuration settings have changed. I have reported it to my provider who advised that they think the Mac is looking for a fixed IP address and they use dynamic addresses. I have had the Mac for months and have not had this problem before. I would appreciate any help please on how to fix this ?

    Then I get a separate pop up that says: Secure Connection Failed. aus3.mozilla:443 uses an invalid security certificate.
    The certificate is only valid for the following names: securelogin.arubanetworks.com, www.securelogin.arubanetworks.com
    (Error code: ssl_error_cert_domain)
    This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
    If you have connected to this server successfully in the past the error may be temporary and you can try again later.
    I have tried many many times!

  • Keys and settings have changed on my wireless keyboard

    I use the apple wireless with my iPad 2, and somehow the language settings have changed and keys have changed placed. How do I fix this?

    Thanks,
    I thought I had done this earlier, but when I tried again (a well as purposefully selecting a different language, then back to Norwegian) it seemed to work.
    Good stuff. Thanks again
    - Lars-Christian

  • Settings have changed

    About a week ago I noticed that my display was acting weird and changing the settings at a random rate. Recently I found out that the setting had been changed. So, I started to check around and found that the loggin items had all been deleted and that other settings had changed.
    Now I am finding that I can't access some web pages that I have been visiting for a long time. I reset the Safari settings to no avail.
    What the heck am I doing wrong here.

    No, no changes in the name of the home folder.

  • TS4002 Can you tell me if the smtp settings have changed recently?  I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working.  Error message is: Authentication failed because Outlook doesn't support any of the

    I am able to receive messages on my IMac using Outlook but am unable to send.  I've had no trouble in the past but began receiving the following messages today.
    5.7.8 Bad username or password (Authentication failed).
    Authentication failed because Outlook doesn't support any of the available authentication methods.
    I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues.  Any advice?

    Here are the correct settings. They have never changed since iCloud debuted a year ago.
    Server information
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud. 

  • Syncing iphone: Itunes says settings have changed, asks if i want to apply these changes, but no changes have been made?

    Itunes 11.3, but this has happened for quite a while, several versions at least. Iphone 5, Ipad 2, this happens with both devices. I sync locally to my macbook pro (late 2011 version, running 10.9.4), using a wired connection.
    I will have the 2 devices hooked up via the factory supplied cords. Doesn't actually matter if it's both or just one device. If I have, for instance, the iphone selected via the sidebar, and am displaying the Summary tab, normally you have a sync button to the lower right. Quite often, this will randomly change to two buttons, - Apply, Don't apply, as if I have made settings changes or something, although I haven't. No changes have been made. If I select a different device in the sidebar of itunes, a pop up will open asking me if I want to apply the changes? I say no, all is good. BUT - it's annoying!
    Is there any way to make this stop?

    No-one? Am I the only one? I doubt it...

  • CS6 crashing when sequence settings are changed

    When I launch CS6 and select a new doc - it had default settings for the sequence. When I change them to DSLR - or anything but default......CS6 crashes, does not say why & shuts down. Tried changing them after setting everything else - same result.
    Running a HP 8770w Elitebook
    32G RAM
    SSD primary
    twin SATA's raided
    nVidia K5000M (supported_cuda_card.txt in Adobe changed to read Quadro K5000M)
    Any thoughts? I cannot get PPCS6 to run anything if I change the setting.

    I'm sorry if I was not clear. I was referring to sequence presets. If you do not choose the proper one BEFORE working it screws up the footage. Sure, you can change the presets once working - but that crashed it too. Loved the comment though!!
    On a fresh load of CS6 - the default sequence preset settings are other than DSLR - which is what I use. SO, you either change them in the first window, or do so after the sequence is open & running. Neither would work and crashed out as soon as you touch a button other than the default camera setting. We tried a number of different approaches to get the proper setting loaded. Nothing.
    It turns out it's all an Adobe/nVidia issue. CS6 Premiere does not dig the Quadro K5000M.
    But, after repeated attempts we found a workaround.
    Fresh install of CS6 - restart
    Edit the cuda_supported_cards.txt file as described in these Forums. Restart
    Hack the card itself - restart
    launched CS6 Premiere Pro & not only is the card there - but fully operational.
    Results of speed tests in HD & 4K were amazing - this is realtime editing - finally.

  • Seq settings have changed!

    Working in FCP 6. We have 6 different projects. Clips are in apple pro res HQ. Project seqs are 1080x1920 which matches clips, but for some reason one of the project timelines has ended up with settings different to these. Its now 1080x1440 and when I change it back in the seq settings it pilar boxes the video. I dont want to recut from scratch so is there a way I can retain the current cut while correcting the seq settings?

    +Talked to apple tech support, they sent me here.+
    That's not amusing! neither it is reassuring for those who thought that Apple support is
    the most reliable source of technical advice for users.
    The service provided by this forum appears clearly faster and more efficient besides being totally free ...
    Well!...Anyhow!
    Was your original format HDV?
    Your problem might have something to do with altered pixel ratio have you checked that too?
    I pass the relay to the next fellow!
    G

  • My settings have changed without my permission , how i can rest these ?

    ''Hello I am using 3.6 mozilla firefox on my laptop. I recently noticed that the layout on the page has changed from its former settings & I have no knowledge has to how to restore it to its former arrangement. I do not know why this happened. The changes are noted as ....when I click on a link I no longer have the URL address as the the address bar that was at the top of the page has gone. Also I used to have a " back & forwards" arrows which I used to go back ....this is now gone & instead I have to select the history option every time & select back , which is annoying for me. How can I rest my page layout to where ot was formerly ?''

    Sounds like you have the Menu Bar (File, Edit, View, History, Bookmarks, Tools, Help) but just in case you don't, see: <br/>
    http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    Navigation Toolbar (Back/forward, Refresh...Home, URL/Location Bar, Search Bar): Either click View > Toolbars, click on "Navigation Toolbar" to place a check mark OR right-click the Menu Bar, click "Navigation Toolbar" to place a check mark. See: <br />
    https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing
    http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
    http://kb.mozillazine.org/Toolbar_customization
    http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    http://support.mozilla.com/en-US/kb/Navigation+Toolbar+items
    Bookmarks Toolbar: Same procedure as Navigation Bar except click "Bookmarks Toolbar".
    You could be in Full Screen Mode if you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See:<br />
    http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars

  • Gmail stopped working on my iphone but no account settings have changed

    My gmail account has been set up in the "mail" client on my phone for over a year, and then suddenly stopped working two days ago. I get an error that says "The mail server 'imap.gmail.com' is not responding. Verify that you have entered the correct account info in Mail settings" but I  haven't changed my password or settings...I have gone back in and re-entered the password (which it accepts when I enter it) and turned on other SMPT servers, and restarted my phone - nothing is working. Any ideas?

    Yes, this is a known problem.  Google is working on a fix.
    Here's an article documenting it: http://www.macrumors.com/2012/08/10/some-experiencing-issues-with-gmail-on-ios-d evices-google-working-on-fix/

  • Firefox carshes at startup no settings have changed. Latest version of FF. I just rebooted the computer from windows updates.

    After reboot and installing windows updates etc. FF crashes all the sudden. No idea why. I have deleted all profiles completely, unintsalled ran ccleaner and reinstalled. nothing. Any ideas? I don't think windows updates effect FF. FF will not even open in safe mode and rests d not do anything all I can do is restart and close.
    Thanks I appreciate anybody who can help. I have current anti malware and my pc is clean. Windows 7 64 bit. I use Webroot and that is temporarily disabled as I try to solve this.

    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!

  • DNS Settings have Changed with Snow Leopard Update

    Before I upgraded to SL, I was able to append a DNS server to the list of servers that my MacBook Pro acquired from the DHCP server. This way, I didn't have to manually edit my DNS settings all the time when I was in the office and wanted to access our lab network by name. Now after the upgrade, I have to remove all manually entered DNS servers before it will use the DNS servers given to it by the DHCP server. Is there a way that I can always append my lab DNS server to the list given to me by DHCP?
    Thanks,
    John

    I am on or office wireless network which handles the DHCP lease and DNS addressing, but I am an engineer in the office and access the lab often and we have another DNS server in the lab to handle all of the lab network. The Sales folk don't need access to the lab so the DHCP server doesn't give out the lab dns server... I would like to access the lab via name, not IP, so I need the lab DNS server on my list of servers. If I can't append this to the DHCP list, I have to manually add all three every time I am in the office. I am frequently out at customer/vendor sites and use thier wireless, so I get thier DNS list.
    Short answer is I need our lab DNS server on the list and frequently move from network to network... I want it to work the way it was before the "upgrade", which wasn't much of an "upgrade" if it breaks this. I want my Leopard back.
    John

  • Lync mobile - server settings have changes please restart

    Hi,
    I have an issue within my current deployment. Mobile clients keep getting the message "Your Server configuration has changed, please restart lync." every 5-15 mins. 
    From my reading so far its suggested that changing the TTL on the IIS reverse proxy from 200 to 600/960 solves the issue. This hasn't worked for me. 
    Has anyone else had a similar issue and know of another fix or change that may be required? 
    Thanks
    Joel
     

    Hi,
    Did this happen for all kind of mobiles?
    Please double check the configuration of IIS ARR with the help of the link below:
    http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
    You can try to enable logging on mobile devices and Front End server for troubleshooting.
    If you get a 502.3 error in the log, please also troubleshooting with the help of the link below:
    http://blogs.iis.net/richma/archive/2010/07/03/502-3-bad-gateway-the-operation-timed-out-with-iis-application-request-routing-arr.aspx
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for

  • Help! App Download error message

    My son and I share an iTunes account.  He has an ipod5 and I have an iphone4.  Whenever we try to download apps from the App Store we both get a message that we are not able to download.  It happens for multiple apps and we both have plenty of space!

  • CRM Support Package Manager - Add transport request to queue

    Hi, I'm applying CRM Support Packages with SP_MANAGER on the production system. I already applied these SP on the development system, I performed an SPAU adjustment, selected the corresponding transport request to use it on the production system, but

  • Flash canvas

    I have a question about flash canvas where I asked?

  • Keyboard shortcut for using the color picker in another application

    Hi, I'm new here. My first post. I remember there were a keyboard shortcut in Ps for using the color picker in another application. For example picking a color in a web browser. I just don't remember the keyboard shortcut. Anyone know it? Regards, Le

  • UME permissions for Images Saver Action Block,  MII version 12.1

    I have a BLS using the Image saver block but it seems that some MII users can do not have the ablity to save files using this action block.   The BLS transaction works fine when I'm logged in as MII admin.  What UME permissions do you need to write f