My serial numbers provided on disc sleeve doesn't work

my serial numbers provided on disc sleeve doesn't work

Serial number for what? What system? What else? You need to be much more specific.
Mylenium

Similar Messages

Phoshop Elements 13 install will not accept serial numbers provided, why?

Phoshop Elements 13 install will not accept serial numbers provided, why?

I don't know but it is probably for Windows and my Mac wont take it. But the problem Adobe wont let me talk to a representative. All I get is someAdobe
Tec company they send me to that wants big money to solve the problem. Which they can't do.

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

Those links weren't particularly helpful to me. They convinced me to install the drivers for my USB 2.0 card, but that didn't make a difference. Still no OS X without a PRAM reset if I've dared to venture into OS 9.
It's always been my understanding that an unblessed System Folder will not be selectable in OS 9's Startup Disk control panel. My folders are blessed and healthy. Of course I'm running 9.2.2, as stated in my first message. I also frequently verify and repair my disks and permissions.
I did a verbose startup of OS X, and noticed something funny about "ATY...too old." Perhaps this problem is related? I ventured into my system.log file and there it was, repeated over and over, everytime I've booted this computer:
Aug 8 18:30:24 localhost kernel: From path: "/pci/@d/pci-ata@1/ata-4@0/disk@0:10,\mach_kernel", Waiting on <dict ID="0"><key>IOPathMatch</key><string ID="1">IODeviceTree:/pci/@d/pci-ata@1/ata-4@0/@0:10</string></dict>
Aug 8 18:30:35 localhost kernel: ROM ndrv for ATY,Rage128y is too old (0xb3383430)
Aug 8 18:30:41 localhost init: kernel security level changed from 0 to 1
Anyone know how to interpret that? Is it related to my problem? I googled it, and all I found was a web board of people arguing over whether the Apple installed stock ATI Rage video card that came in the G3's is appropriate for Panther. The Ye's have it as far as I'm concerned...as long as I leave OS 9 alone, my video is fine on this computer!
14" iBook G3 800, B&W PowerMac G3 350, Mac Classic II 16 :-P Mac OS X (10.3.9) System 7 Rocked!

MBP late 2011 disc driver doesn't work

Before I updated the OS to 10.9.1, my disc driver worked well and I usedbootcamp to set up WIN 7 for several times. But afterwards, when I tried to reset the bootcamp win7, I did like I always did, delete the former os harddrive part, then I started to reset the win7, I found that the disc driver doesn't work.
When I insert a disc, it would be push out whatever disc I insert, os disc, cd, dvd. It just doesn't work.
I don't know if it is broken or just beacuse of the new 10.9.1
I need some help.
Thanks for you all who are willing to see this.

It sounds like the lens on your optical drive is dirty. Use a cleaning DVD or wrap a microfiber cloth around a credit card and carefully slide it in and out a few times.

I can no longer burn CDs - "may be incompatible with this disc burner, try slower speed, try another make of disc" Still doesn't work

I can no longer burn CDs - "may be incompatible with this disc burner, try a slower speed, try another make of disc" Tried that, still doesn't work.

Try a free burning utility which allows you to turn off the laser for test burning (so you don't waste media). Try burning a test CD outside of iTunes. If it works it's iTunes. If it doesn't work it could be computer software or hardware but then we know how to proceed.
List of burning software on pure-mac.com - http://www.pure-mac.com/diskfile.html
Burn - http://burn-osx.sourceforge.net/Pages/English/home.html - includes basic DVD authoring

Don't want to use new Numbers, but 'get info' fix doesn't work

Hi All,
I made the mistake of installing the new Numbers a month or two ago. I don't want to use the new Numbers because I need to work on the same documents on older machines that won't work with the new Numbers. On my machines with both versions of Numbers, I want to be able to just double-click on the documents and open with the older version. The usual fix is to use get info on a document, select the app I want to use for this type of document and then hit 'change all' for that type of doc. Well that's the theory at least. I've found that this setting doesn't stick in this case. (I've never seen this not work). It still opens with the new Numbers.
I've tried removing Numbers, but Software Update keeps nagging that there is an update available jfor Numbers, and wants to reinstall it. They 'dumbed down' Software Update so that you can't remove updates you don't want to be bothered by. (I hate it that Apple continually removes features, then adds them back in a year or two!) So I'm stuck.
Any one else have this happen? Any fixes?
Thanks!

Using Get Info to change all documents to open with Pages 4.3 doesn't work. The Mac OS will always default to the newest installed version & has for as long as I can remember. It will work on individual files, but that could be a lot of files to reset.
This is what worked for me. After I installed the new iWork updates I created a folder on an external drive & named it "Applications." I then moved the new iWork apps to this folder & renamed the applications Keynote 6, Pages 5 & Numbers 3. I have icons for two versions of Pages & Numbers (I rarely use Keynote) in my Dock. Even with two versions of Pages & Numbers running, double-clicking an existing file opens in Pages 4.3 or Numbers 2.3. This should also keep the Mac App Store from nagging you to update.
Since the last update I've used the solution Peter Breis posted (4th post in that thread) in iWork Tips 'n' Tricks with a little "tweak."
Making Numbers '09 the default whilst keeping Pages 5
1. Move any new iWork apps in another clearly labelled folder (I created a new folder in Applications & named it iWork 13)
2. Menu > Apple > System Preferences > Spotlight > Privacy > drag the above folder into the list
2) Move the new iWork folder into the trash (temporarily)
3) Select any Numbers file in Finder > Menu > Info (cmd+i) > Open with: > Pages '09 > Change all
4) Re the new iWork folder from the trash (right-click > Put back)
Pages 5 should no longer appear as a default App, and you won't have to keep a copy in a separate drive or dmg.
IMPORTANT: Make a note of where and how Pages was installed for the next App Store update and temporarily move it back there before putting it away again in the folder concealed from Spotlight.

So I bought a Used copy of final cut pro 7, but i cant use it because I need a serial number and the serial number that came with it doesn't work. What do I do?

I bought my copy from ebay and when i got it I installed it, but every time i click on final cut pro 7 it asks for a serial number and when i put the on that came with it, it tells me it an invalid serail number. It is kinda making me want ti throw my mac out the window and just stick with windows.

First, find out if you bought an "Upgrade" version, or a "Full" version.
If you have an "Upgrade" version, it will require two serial numbers to work - first, the serial number of the last "Full" version you are upgrading from, then the serial number of the "Upgrade" software you are installing.
If you have bought a "Full" version, see this KB article with help entering serial numbers in the Pro Apps:
http://support.apple.com/kb/TS2005
MtD

My disc drive doesn't work when iTunes is installed.

I had to uninstall and reinstall iTunes last night and this morning I discovered my disc drive was not working. I looked online and found that iTunes will sometimes do this to a computer's disc drive. I uninstalled iTunes and my disc drive now works. Is there anyway I can keep iTunes and have my disc drive working?

Hi reynoldsmar!
I have an article here for you that will help you address this issue:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/ts2308
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Macbook Pro recent update to Snow Leopard now disc drive doesn't work??

I just updated my Macbook Pro to Snow Leopard 10.6.8 now my disc drive won't work at all! I've read a couple forums here that show everyone had this problem back in 2009 when I guess this first came out...great. How do I fix this? It appears to be a software issue. If I upgrade to mavericks will this fix it? Although I also see that makes your computer very slow! Ugh I need help please!

Two things to try:
1. SMC reset, Directions are here - note the steps are different depending on whether or not the battery can be removed by the user:
http://support.apple.com/kb/ht3964
2. NVRAM / PRAM reset:
http://support.apple.com/kb/ht1379
These steps are worth trying, although the problem may be deeper.
Please post back with your results.

Serial number not on disc sleeve nor on packaging. How do I get it?

I don't have a redemption code. Elements 13 was purchased through Amazon.com. No redemption code found in correspondence. So I have a product I cannot install. Can anyone provide a solution?

1st - if you bought from Amazon, you need to contact Amazon
2nd - some general information
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Target Disc Mode doesn't Work - what do I do?

So my old Apple (2004 G4 Powerbook) went out on me. It will start it up but it won't advance past the start up screen. So I bought a new Apple. I have followed the instructions on how to transfer data from the old one to the new one using the Target Disc Mode, and the Migration Assistant. I can start my old one up in Target Disc Mode (the FireWire icon shows up on the screen). However, my new computer won't recognize it. In the migration mode, all it says is "searching for disc". It doesn't show up on my desktop either (my understanding that it should when in that mode). Any ideas of what I can do? I really want to be able to transfer that data over...Thanks in advance!

Hi and Welcome to Apple Discussions ...
Sounds like the drive in the PBookG4 has failed but I never say die. If by chance you use Airport and have a wireless network set up, you might be able to access the PBook drive with the new Mac. On the new Mac, make sure Airport is turned on. Open a Finder window, select Network in the Sidebar on the left and then click Network.
On the PBookG4. You say it starts up but not past the start up screen. Have you tried using the restore disk that came with the PBook and using Disk Utility to possibly repair the drive? If not, and you have the restore disk, post back and I'll give you the instructions to do this.
Carolyn
Message was edited by: Carolyn Samit

I'm trying to re-install Adobe Acrobat 7.1.0, but the Serial Number of my old copy doesn't work. Where do I get a new Serial Number?

I bought a copy of Adobe Acrobat 7.1.0 in 2001, and it's been working fine, but now I'm told I need to download a new copy. However, when I get to enter the Serial Number (of the original copy), it says it's invalid. How do I get a new Serial number?

OK, answered my own question: the Serial Number is listed opposite the link at Adobe - CS2 Downloads

My disc drive doesn't work how can I fix it?

My disc drive is not proccessing discs, is there any way to fix that because I need to update my computer. thanks

Hi,
some people round here had success using a 'Standard DVD-cleaner disc' like the ones for Home Theater Systems.
Regards
Stefan

Can query serial port with NI MAX, but doesn't work in Labview

I'm trying to control a Coherent Sapphire 488 with labview. It's connected via a serial to USB converter into the computer. I can communicate with a device using NI MAX, but when I try to run the vi (attached), it works for several queries, but evetually returns a null character, after which I can no longer communicate with the port. If I then go into the NI MAX interface, every time I try to read it gives the "VISA: (Hex 0xBFFF0015) Timeout expired before operation completed" error message.There are also several queriess from the instrument's manual that don't seem to work at all (with or without MAX) and always return a null character. Any help is appreciated. I'm certainly a novice with device communication. Thanks.
Solved!
Go to Solution.
Attachments:
488_query.vi ‏16 KB

Generally issue with termination character.
And you are sending \ and r and not CarriageReturn.

Struts-faces library: provided struts/tiles example doesn't work?!

Dear all,
I�ve been trying to migrate my struts-tiles application to JavaServer Faces using the struts-faces library. I downloaded the latest nightly build, but I was unable to deploy and run the second example (the one using tiles) on Tomcat 5.0.28.
At first, the <h:commandLink> components for the �Register� and �Login� links on the first page (loggedoff.jsp) wouldn�t work, probably because they should have been replaced by <s:commandLink>. So I fixed that, but then I get an inexplicable http 404 error: �Invalid path /layout was requested� when I click on any of the two links.
Looking at the source code of both JSP and HTML I noticed that the JSP element <s:form action="/editRegistration"> translates to <form id="menu:_id5" name="registrationForm" action="/StrutsFacesExample/layout.do" method="post">. The action element is obviously(?) wrong: there is no layout.do action mapping anywhere, it�s the path pointing to the main layout jsp with the suffix replaced!
I�ve been able to trace the problem down to method �action� in library class org.apache.struts.faces.renderer.FormRenderer, which does the following:
protected String action(FacesContext context, UIComponent component) {
String actionURL =
context.getApplication().getViewHandler().
getActionURL(context, context.getViewRoot().getViewId());
if (log.isTraceEnabled()) {
log.trace("getActionURL(" + context.getViewRoot().getViewId() +
") --> " + actionURL);
return (context.getExternalContext().encodeActionURL(actionURL));
Any ideas on what could be going wrong here? I also tried deploying the example on Tomcat 5.5.7 and JBoss 3.2.5, but the behavior was the same.
Any comments would be greatly appreciated!
Mario

Did you ever find a solution to this problem? No, unfortunately I am still looking for a solution to this one.
I� ve also reported this to Bugzilla (http://issues.apache.org/bugzilla/show_bug.cgi?id=35265) so you might want to keep an eye on the issue, in case something comes up. However there appears to be no significant activity in the library�s source code repository for almost a month.
After reading other discussions in forums like this one, I must say that I am discouraged: I seriously doubt if anyone has successfully managed to use the struts-faces integration library. A lot of people are suggesting that integrating the two frameworks is not worth the trouble, and so I am now in the process of evaluating the cost of complete migration from struts to jsf (btw, it doesn�t look good�). Nevertheless, some recent articles demonstrate the library�s use (the most recent one is Kito Mann�s http://www.jsfcentral.com/reading/#4030 ) so I might be wrong.
It would be nice though if someone who has managed to integrate the two technologies successfully would share his views on this forum�
Mario

My serial numbers provided on disc sleeve doesn't work

Similar Messages

Maybe you are looking for