My server time is 1/2 hr slow

Dear All,
I have r/3 ent server on hp-ux (oracle), my server time is 1/2 hr slow.
How to rectify this problem, how change any note on this.
Regards,
satish -k

Without knowing the REASON why the system is slow it´s impossible to give a suggestion.
Check SM50/SM66 when this occurs, check if a backup (or the like) is running, check ST02 also. You see anything that is "not normal"?
Markus

Similar Messages

Time difference between local time and server time

Hi Guys,
I am currently experiencing a time difference of 40 minutes between the local time and the current server time.
The local time seems to be 40 minutes slower than my current time.
Path for Local Time : CMC -> home -> servers -> input.file repository sever -> metrics tab. (Under the category of Installed on machine peacok, there is a local time.
Question is how can i sync the local time with my current server time?
Let me know if more info is required.
Rgds
Collin

Hi Collin,
Under CMC >Home >Input FRS , the local time shown is current time of BO Server.
Since CMC is web-based, any date, time value will be coming from BO Server box.
u2022     In case your system and BO server is in same time zone then update the date-time of BO Server
u2022     In case your system and BO server is in different time zone then check with IT team to figure out the BO Server will be maintained in which time zone.
u2022     If current requirement is specific to some report then you can add 40 min in all date value in report to get the desired result.
Thanks,
Sushil

Error in report RSPOR_SETUP : "Different Server Times"

Hi,
I installed BI 7 and I have configured the communication between BI and EP.
When I execute report RSPOR_SETUP to verify the configuration, I am getting the following error message at step 12 (Maintain User Assignment in Portal):
2. Compare SAP BI and EP Server Time
Different Server Times could be a reason for retrieving always an invalid SAP Logon Ticket.
SAP BI Server Time: 09:08:16 2007/03/23
SAP EP Server Time: Fri Mar 23 09:08:16 EDT 2007
The time is identical, but it seems that the format I causing me problem.
How can I configure the date format in EP and BI ?
Best regards,

check the Note: 816761 and pasted it for you. May be this will help you.
There are new options to define how certain date formats (date, timestamp and time properties) will be formatted.
The following keys can be configured in:
EP6:
Configuration / Global Services / Property Metadata / Properties: Column "Additional Metadata"
NW04/NW04S:
Configuration / Global Services / Property Metadata / Properties: Select "Mode: Advanced". See column "Additional Metadata".
-Format
Use DateFormat defined patterns, DateFormat.SHORT, DateFormat.MEDIUM, DateFormat.LONG.
Documentation: http://java.sun.com/j2se/1.4.2/docs/api/java/text/DateFormat.html
as values: long/medium/short.
Example: format=long results in
Date type -> 17 January 2005
Timestamp -> 17 January 2005 16:09:23
Time -> 16:09:23
-customFormat
To set a customer pattern according to documentation: http://java.sun.com/j2se/1.4.2/docs/api/java/text/SimpleDateFormat.html
If the pattern is not correct, the default date format will be used.
Example: customFormat=dd.MM.yyyy hh:mm:ss -> 17.01.2005 04:09:23
Regards.
PS: assign points is the way to say thanks

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

Server Time and Local Time (Dreamweaver) Off By 1 Hour

How can I get Dreamweaver to show me the correct time stamp on my files on the server and my local machine? When I telnet into my server, the date and time stamp on all files is correct. My server time is set properly to ET (GMT-5). My local machine's time is properly set. I asked my sysadmin if PureFTP has any timezone settings and I was told by the sysadmin that all my server times and timezones are accurate. My sysadmin said that Drwamweaver is the culprit.
I have lived with this for a long time, but it is extremely annoying and I would like to fix it.
I searched high and low in the Dreamweaver option settings for some sort of timezone setting or offset -- found nothing.
Has anyone experienced a 1-hour out-of-sync issue between a file's actual time stamp on the server and what Dreamweaver shows it as in the Remote/Local Files View?
Thanks.

During Daylight Savings Time.
http://forums.adobe.com/message/3545349#3545349
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Mail, Server Admin, MySQL running very, very slow

Hi all,
I have this Leopard Server on a Mac Mini and I experience some big bottlenecks on mail services (especially webmail), Server Admin connections (both local and remote), and also connections with mySQL clients (remote). Local MySQL is working fine. It is not the same for mail and Server Admin. They are very slow also for local connections. Any idea? Hint: I'm using a USB-ethernet adapter (from Apple) for my public IP's (I have 2 of them) and I use built-in ethernet for local network. I've switched them, I tried only with the built-in ethernet... no change. Please help... my enthusiasm about this server solution is getting lower and lower... Thank you very much

pterobyte wrote:
Have a look at system.log and mailaccess.log for clues to begin with.
Server Admin is usually slow (locally and remotely) when the DNS (forward and reverse) setup is not correct.
Since mySQL seems to have only problems when used remotely, I'd look at bandwidth, routers and switches involved.
Is mail only slow when used via webmail or via any IMAP client?
You're a genius as usually
It seems that I removed my reverse zone accidentally... I didn't even think to look at DNS setting before you told me... Thank you very much

Time Capsule Disk is very slow

Hello,
I'm using 10.8.2 and I just bought a Time Capsule 2TB for my backups.
I have tried to use Time Machine to backup my data (about 200GB) via our wifi network. My MBP (Retina mid 2012) stands at a distance of 2 meters from the Time Capsule.
It took about 16 hours and at 90% it crashed.
After that I used Carbon Copy Cloner to backup my data manually. I think I will go on with this methode, because I will have instant access to my data.
CCC did the backup a bit faster (about 12-13 hours). Copying other files to the Time Capsule Disk is also slow (about 7-8 GB per hour). Navigating is also slow.
I turned off Spotlight completely without a difference in copying speed.
I think (and I hope) this Time Capsule disk could be faster. Is this a bug? Are there workarounds?
Thanks a lot!

-To sum up things: The setting "DHCP + NAT" delivers fast copying speeds
Yes. You will eliminate the backroute to the fiber modem or maybe even back to your ISP - depending on their setup.
The standard setting of the router is "DHCP + NAT" right?
Normally the standard setting is good enough to obtain an internet connection instantly (without filling in IP, DNS etc. manually).
Yes, you shoudl not have to fill in those details. Should work straight away as your MBP gets thos edetails automatically (yes?)
best to reset the Airport Extreme to defaults and connect it again using DHCP / NAT

XSLT Mapping server Time

Hi,
I am doing a xslt mapping, i need to mark a field with the server Time of xi server, any lights on this?
Regards,
Anirban.

Hi Anirban,
i think u dont have a fucntion to get the current time of the server directly in XSLT.you need to write a user defined function in java to get the current time and call that java function in XSLT.
u can try this code for getting time
SimpleDateFormat formatter = new SimpleDateFormat("hh:mm:ss a z");
Date now = new Date();
String nowAsString = formatter.format(now);
if u run it in ur XI server u will get the server time.
for calling java functions in XSLT chk out this link
How to use standard java functions in a XSLT mapping
regards
jithesh

Edge Animate causing Server Time Out Error and other problems

Site is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT au

Site is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT au

Connection to server times out

Hi, I know I've seen somewhere that you can set how long before your connection to your remote server times out in DW. After a few minutes of editing files, and then when I go to upload them to my host, It takes forever just to make a connection. I used CS3 for a while, then upgraded to CS5. CS3 didnt seem to have this issue.
Another issue I seem to have is when I DO put files to my remote, sometimes the files dont seem to reflect changes I made. For instance, I added an id attribute to a firm field, uploaded my file to the remote, hard refreshed my browser viewing the same page and viewed source. The form field id was not there! So I clicked the expand local and remote files button and pulled the file over to the remote manually!
Maybe these are issues with my hosting company? Anything I can do to ensure my remote connection stays connected, at least for an extended period of time if not indefinately. Thanks in advance!

Hi Nancy, thats for the tips and info. I've tried most of what you suggested. One thing I never thought about though was toggling passive mode on and off. For some reason I just always assumed this should be on by default. So I will try that and see how it goes over the next day or so.
Also the FTP optimize performance was checked. Seems like I had an issue with this a while back, so I unchecked it as well.
Now the other issue of why updated files arent showing up on my remote. Yes I always use ctrl+F5 to refresh my browser. Again, this morning when I did that very thing, and then viewed source, the updated code was not there. The code I am referring to was about 20 lines of javascript that was showing in dw code view, but not in ff source view. So not sure about that one. As you said its possibly my host provider. Thanks again!

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

Server time

how i can find apllication server time and database time.

Hi Vikas,
The database time
SYSTEM -> STATUS -> the field system field will have the system time.
Regards,
Phani.

Server Time/Date ?

How can i get Server Time/Date from an applet

You can't without making a request to the server. An applet is simply a bunch of bytecode that is downloaded to the client and executed there. Once the applet has been downloaded to the client, it has no connection to the server.
To make the connection to the server from the applet, you can make a HttpURLConnection to your server (the applet sandbox will allow this if it is the same server the applet came from) and request a servlet URL. The servlet you request can simply grab the server date/time, format it as text, and return it in the HttpServletResponse as tyle "text/plain". Your applet can then parse the text back into a date object and proceed.
John H.

Time machine backup is very slow after migration to Mountain Lion

After I migrated to mountain lion, Time machine backup is very slow. Time machine preference says there is no previous back up although I had Time machine on before migration. It did not help verymuch to connect an ethernet cable between my timecapsule and my Macbook Pro
Here are the screenshots I see:
Should I erase the previous backup made on Lion before backing up on Mountain lion? in this case how do I transfer the Lion backup file on another disk just in case something goes wrong before I have a good backup under Mountain Lion? just like any other file?

After further reading on the forum, the problem was solved: I used the possibility to back up on a second disk (in the preferences Time Machine choose a disk and save on both disks) to make a back up on another usb disk, and then erased the old .sparsebundle file on my Time Capsule. I have then re defined time capsule as the back up disk and then the backup was muuuuuch faster (one night instead of less than 1 giga after 3 days.....)

Javascript Confirm Based on server time!!

Hello Everybody,
I want to raise a javascript confirm dialog box based on the server time. On button click, I want to raise the following code if the time is between 11 am to 24pm.
E.g.
IF l_time BETWEEN '11:00' AND '24:00' THEN
htp.p('<script>');
htp.p('var r=confir("Do you want to proceed?");
htp.p('........so on');
htp.p('</script>');
ELSE
-- just submit the page
END IF;
Any help will be appreciated!!
Thanks,
Parveen

Hi,
a.Always mention the Apex version, in every post.
b. Always enclose your code in a pair of tags to make is more readable.
Javascript can read the local machine time. If you want to access the server time you will need to use PL/SQL or SQL for that and pass that to the javascript function.
Any specific reason why you are generating the JS through PL/SQL? Its so much easier to decalre the function in the Page HTML Header rather than doing htp.p.
Regards,

My server time is 1/2 hr slow

Similar Messages

Maybe you are looking for