My share operation failure occurs after about 5 seconds for DVD and Apple Devices.  I can share to a master file, but without audio.  Help?

My share operation failure occurs after about 5 seconds for DVD and Apple Devices.  I can share to a master file, but without audio.  Help?
It has error number -50.

If it only happens with this project, it's probable some media files have become corrupted.
Those may be render files. Make sure background rendering is off. Select the project in the browser and from the file menu, choose Delete Project Render Files; choose All from the dialog. Without rendering,try exporting.
If that doesn't work, use an optimized version of your DSLR clips. (Right click on the clips in the browser and hit Transcode.)
Russ

Similar Messages

  • Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black but I can see the arrow (pointer). And only after few seconds the arrow and the screen really shut down.

    Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black (although I can see it is stil on) and I can see the arrow (pointer). Only after 15 seconds the arrow and the screen really shut down. It did not occur before, as a matter of fact it was instantaneous. What could be the problem?

    Note the time in your Mac's menu bar or some other accurate timepiece. Then, press the button to put the MBA to sleep. Wait until the cursor disappears and for all indications that the Mac appears to be asleep.
    Then, wake the Mac the way you normally wake it.
    Then, find the Console app - it is in your Utilities folder and looks like this
    You can find it by selecting Utilities from the Finder's Go menu.
    Open Console.
    If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu.
    Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's sleep problem. To do that type the words sleep cause in the Filter field at the upper left of the Console window:
    That will cause all log entries to be hidden, except for the entries containing those words. The last entry in the list will correspond to the last time you woke the Mac. It will have a time stamp in the form hh:mm:ss later than the time you noted in the Mac's menu bar prior to putting it to sleep.
    Make note of that exact time in hours, minutes, and seconds.
    Next: Clear the filter field by clicking the x in the above screenshot. It should then look like this:
    All previously displayed log entries will reappear.
    Next: Find the log entry that corresponds exactly to the time you noted in hours, minutes, and seconds containing the words "previous sleep cause". You may have to scroll up or down a considerable distance. When you find that line, select it and drag your cursor up and prior to the entry corresponding to the approximate time you noted before putting the Mac to sleep. This will result in a selection of perhaps 50 to 100 lines or so.
    One or more of them, along with their time stamps, may reveal the reason for the fifteen second delay.
    Copy and paste those log entries in a reply.
    Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

  • Difference occurs after PCA Transferred for Accounts Receivable

    Hi All,
    There is a ticket which says.."Difference occurs after PCA Transferred for Accounts Receivable in month end ".
    Can anyone help me in understanding the concept. What exactly does it mean and where do i need to check.
    Thanks
    Mercy

    We were able to trace the reason for the difference.
    We checked the difference between FI and PCA and found it is due to old document clearing timing problem.
    Since it happened in April and we cannot change in FI , we can only manually adjust in PCA itself.
    Thanks,
    Mercy

  • I start to play a video in youtube and after some seconds it frezze and never continues. Any solution?

    I start to play a video in youtube and after some seconds it frezze and never continues. Any solution?

    It always happen at 25 seconds.

  • I have a 5.1.1 3GS phone that cuts off calls after about 3-4 mins, and goes to the apple logo, the phone then resets to login after a further 1 min. Any suggestions

    I have a 5.1.1 3GS phone that cuts off calls after about 3-4 mins, and goes to the apple logo, the phone then resets to login after a further 1 min. Any suggestions

    You have outdated iOS software so without upgrading it first there is little you can do.   A restore will force you to upgrade as 5.1.1 is no longer signed.

  • I cant open adobe acrobat pro after just paying for it and downloading it!!

    I cant open adobe acrobat pro after just paying for it and downloading it!!

    What is your operating system?  Acrobat version?
    What exactly happens when you try to open it?

  • I have an old ipod. It worked great until about 2 months ago and now it says I need to restore my ipod but I can't unless I format it, but everytime I try, it says the format could not be completed. Is there anything else I can do to get it to work again?

    I have an old ipod. It worked great until about 2 months ago and now it says I need to restore my ipod but I can't unless I format it, but everytime I try, it says the format could not be completed. Is there anything else I can do to get it to work again?

    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                         
    Reporting a lost or stolen Apple product                                        
      - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • After updating os to 10.9.1can't open pdf files.  I get a message saying It may be damaged or use a file format that Preview doesn't recognise. I can still read older saved files but no new ones arriving by email.  Any help would be appreciated.

    After updating os to OSX 10.9.1 I can't open any new pdf files.  I get a message saying It may be damaged or use a file format that Preview doesn’t recognise. I can still read older saved files but no new ones arriving by email.  Also can't attach a pdf to an email to send out.  Any help would be appreciated.

    Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
    Step 1
    If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
    Step 2
    There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
    Step 3
    If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
    Safari ▹ Preferences... ▹ Security
    and check the box marked
    Allow Plug-ins
    Then click
    Manage Website Settings...
    and make any required changes to the security settings for the Adobe PDF plugin.
    Step 4
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
    Step 5
    The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
    Step 6
    Do as in Step 4 with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

  • HT1414 after installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?

    After installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?

    Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

  • TS3376 The find my iPhone app shows my iPad and iPhone in a totally different location about 100 miles away and my devices are in my lap? I'm confused ...

    The find my iPhone app shows my iPad and iPhone in a totally different location about 100 miles away and my devices are in my lap.... I'm confused ...

    Any thoughts on this , I'm worried that someone has cloned my device Id  and is phishing , or would there be just a major glitch in the GPS ? I have turned off the location app and turned it back on to see if it was a glitch still comes up to the same location about 100 miles way to a place I have never been.  Help !

  • Why the App Store ask for sq.after using it for years and how do find the answers

    Why the App Store ask for sq.after using it for years and how do find the answers

    Reset security questions
    http://support.apple.com/kb/HT5312
    If you do not have a Rescue email, you need to contact apple support, they will guide you through the process of resetting your security questions.
    https://ssl.apple.com/emea/support/itunes/contact.html

  • After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

    After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the
    Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot
    normally.

  • Premiere Elements 11 Sound turns off after 5 seconds on DVD

    Hi Folk,
    I have been using Elemnts 11 for a few months with good success. I created a video from 8-9 clips and it play fine in the tool. I can see the images OK and hear all the audio throughout the video. When I burn a DVD to a Folder on my laptop and play it using Quick time the audio drops out after about 5-6 seconds. I also did a test run and burned the DVD files to a physical DVD and tried to play it and got the same result of the audio droping out.
    Thaks For you help,

    SnapDragon_M5
    Bottom line: I have no problem taking your M2U00715.MPG file into Premiere Elements 11 NTSC DV Widescreen project and burning it to DVD-VIDEO Widescreen on a DVD-RW (4.7 GB/120 min) disc, with full playback of video and audio on the computer or via the DVD player of my TV.
    These are the details:
    Your source media
    720 x 480 @ 29.97 interlaced frames per second. MPEG2 video compression and Dolby Digital Stereo 2 channel audio. This interlaced video is characterized by Fields = Upper Field First, so this must be taken into consideration when the end product is DVD-VIDEO whose format calls for Fields = Lower Field First.
    Importing the file could be done two ways:
    a. Add Media/Files and Folder/ and then dragging the file from Project Assets to the Timeline. The program should automatically set the project preset at NTSC Hard Disk Flash Memory Camcorders Widescreen 48 kHz because it is recognizing that Fields = Upper Field First. Check Edit Menu/Project Settings to verify that is indeed what the program did.
    IMPORTANT. When you bring the file into Add Media, look for a progress bar at the bottom right of the interface. I found an Indexing, followed by a Conforming process at that point. Do not proceed with any work until after those activities are completed and the progress bar closes.
    or
    b. Opening Premiere Elements 11 Windows, going to File Menu/New/Project, selecting NTSC DV Widescreen in the New Project dialog, putting a check mark next to "Force selected settled Project Setting for this project" and exiting from there. Then I imported the clip with Add Media/Files and Folders to Project Assets from where I dragged the file to the Timeline. On the Timeline, I right clicked the clip, selected Field Options and its Reverve Field Dominance option.
    I used b.
    What was on that Timeline had a duration of 50 minutes and 47 seconds. In the burn dialog, the Quality section, the Space Required = 3.15 GB and Bitrate = 8.00 Mbps (megabits per second). The DVD-VIDEO was produced via Publish+Share/Disc/DVD disc, using the preset = NTSC_Widescreen_Dolby DVD. The DVD-VIDEO on DVD disc was completed in about 30 minutes. It played back with Windows Media Player, VLC player, CyberLink Power DVD with full video and audio.
    In view of the above, I would suggest the following:
    1. Repeat what I have just described as a successful run. Take the Organizer out of the equation for now and import the file directly from its hard drive save location via Add Media/Files and Folders.
    2. When that file hits Project Assets, do not drag it to the Timeline until you are sure that there is no progress bar at the bottom right of the interface, indexing and/or conforming the file.
    3. If there is no sound or only a bit of sound on the DVD-VIDEO disc produced, then take the disc to someone else's computer to determine if the file has no sound with this other person's player (computer or TV DVD player).
    4. This one file has a file size of about 2 GB. How many files are you typically burning to DVD-VIDEO from the Timeline. In this context, how much available RAM and free hard drive space does your computer have? Are you getting any low memory messages at any time during the workflow?
    Please review, let us know the results, and we will try to help further if needed.
    Thanks.
    ATR

  • Canon 5D mark ii drops connection after 10 seconds with ALL software (Apple, Canon, Helicon, OnOne,etc...)

    I am using a Canon 5d Mark II and im trying to get LiveView to work on the screen. Since EOS utility doesnt work for Lioni have found alternatives. My #1 pick is OnOne software which allows me to connect camera to Mac via usb. The mac then broadcasts the LiveView to any connected wifi iOS devices. I have done this before on a MacBook Pro running Lion with no problems. On my iMac however, it will not work at all. I can see the LiveView for about 10 seconds before the image freezes, usually followed by the software freezing or returning an error. This problem occurs even in Image Capture when transfering files directly from the camera. If I use a USB reader there are no issues.
    So, there is clearly a problem with the USB drivers or protocols that handle the connection to my Camera. IM IN NEED OF MAJOR HELP so any suggestion will be greatly appreciated and I am willing to try anything. Thanks!

    I've decided just to try to get back to the export that I showed in the first screenshot. That result came before I started tampering with the Easy Setup. Like I said, when I changed the setup the canvas quality improved drastically and the dimensions seemed to fit much better, but the export was vertically stretched and cropped. I just reset my FCE settings and it turns out the default setup is DV-NTSC, but it's giving me a terrible quality still...
    I just want to get back to that second screenshot's quality.. Could someone suggest what I should switch the easy setup to for importing stills from my Canon 5D Mark ii to yield the right results?

  • When i first open firefox homepage (opens with google) after 3 seconds page freezes and cannoct be closed. i have to open seconed homepage to shot pc down. this has only happened since i installed firfox 4. what do i do to fix this

    when i first open firefox homepage (opens with google as set by firefox) after about 3 seconds the page freezes and cannot be closed or minimised. i have to open second homepage to shut pc down or continue to use pc. this has only happened since i installed firefox 4. what do i do to fix this

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Maybe you are looking for