My shuffle does not show in iTunes? old model.

my shuffle does not show in iTunes? Tryd everything. What can I do?

If the "old model" is the 2nd gen shuffle, are you using it with the original USB docking cable that came with it?  It has a mini-dock at the iPoid end.   The docking cable for the 3rd and 4th shuffles do not work with the 2md gen shuffle, because the connector is different.
This documetn shows the four shuffle types
http://support.apple.com/kb/HT1719

Similar Messages

  • IPOD shuffle does not show in itunes

    New IPOD shuffle nver showed up in itunes
    Installed itunes again, no way

    Did this work before on this computer, and it is not working now for some reason?  Or is this the first time you are using it with this computer?
    Make sure the plug on the USB docking cable is completely inserted into the headphones jack, as shown in this document
    http://support.apple.com/kb/ts3572
    If that's not the problem, watch the shuffle's light as you connect it to USB.  Does it come ON?  If it does, what does it do?

  • TS1363 1st generation iPod shuffle does not show up in iTunes (windows 7)?

    1st generation iPod shuffle does not show up in iTunes on my Windows 7 PC (but shows up in my computer).  Tried all the Apple trouble-shooting steps (some several times).  It used to work with Windows 7 on this PC.  Are there other steps I can try? 

    I'm not sure what "all" means, unless you state them, so if you have not done so already, you should use this procedure to reset the iPod shuffle
    http://support.apple.com/kb/HT1655
    Then, shut down your computer (power off) and start it up, with iPod shuffle NOT connected.  Run iTunes.  Then, try connecting the iPod shuffle again.
    Since this is a first gen iPod shuffle that IS recognized by the computer (so it's probably not a bad USB connector), you can also try using the iPod Reset Utility
    http://support.apple.com/kb/HT1238
    This is for the first and second gen iPod shuffle only, and does a lower level reset than using a normal Restore in iTunes.

  • I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
    To get all your content off your connect your iPad to your new computer.
    Then use a 3rd party piece of software to transfer your content
    I have found Senuti useful but there are others listed in the article I linked to in a previous post.
    https://discussions.apple.com/docs/DOC-3991
    That will let you transfer your non purchased content
    For Purchased content log in to iTunes on the new computer
    In Itunes Store click on Purchased under the Quick Links section on the right.
    Download any music by clicking on the cloud button

  • Ipad 2 does not show in itunes

    My ipad 2 was completely dead last night so I plugged it in to charge using the 10W wall charger that came with it and noticed that it did not vibrate when I plugged it in nor did it show the lightning bolt showing it was charging. I left it alone from a few hours and when I checked, it was up to 12%. Normally a few hours will almost fully charge it. I swapped out a few different cables, chargers, and even plugged it into my mac USB, and none of them vibrated and showed the lightning bolt. When I plug it into my Mac, it does not show in iTunes at all under devices. I plugged in my iPhone and iPod and both showed instantly. I decided to leave the paid charge overnight on the wall charger to see what would happen.
    This morning it was up to 53%. I updated the iPad 2 software to iOS 5.1.1, updated iTunes to 10.6.1, updated all software on my Mac (I have OS X 10.6.8) and still doesnt show in iTunes and none of the chargers or cables make it vibrate when plugged in and none show the charging bolt. I deleted iTunes and the Apple Mobile Device driver and then reinstalled thinking perhaps the mobile device driver was messed up - didnt help.
    On the iPad 2, I went to settings/general/reset/reset network settings - no help.
    Of course, throughout this I have reset my Mac several times, reset the iPad both by sliding the bar to shut down and by holding down the reset button & home button at the same time until the Apple logo appears, and as stated above tried several wall chargers and USB cables that works on my other i products. So I do not think its something obvious like that.
    Any help is greatly appreciated.
    iPad 2, iOS 5.1.1
    Mac OS X 10.6.8
    ITunes 10.6.1

    Let me know when you figure this out. I am experiencing the exact same situation. Just started this morning after I switched my mobileme account to icloud. I can see my iphone in itunes, but when I plug my ipad in, nothing. Not on any computer. I have always been able to sync and charge with no trouble. Now my ipad is slowly turning in to a door stop.
    Help!
    Thank you!

  • Why apple tv does not show in itune?

    why apple tv does not show in itune?

    Welcome to the Apple Community.
    I assume you have the Apple TV 1.
    Often a restart of ALL your equipment will help, it may also be a result of instaling or updating security software (check your security settings).
    If problems persist, navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • Ipad does not show in itunes

    ipad does not show in itunes when i try to syncing

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • My iPad 3 does not show in ITunes at all. There is no Devices icon showing either.

    My iPad 3 does not show in ITunes at all. There is no Devices icon showing either.

    stepbro wrote:
    ... I installed MacKeeper yesterday could this be the issue?
    Get Rid of that Software... it is Not Needed... and likely the cause of your issue.
    See Here  >  Beware MacKeeper
    Uninstall MacKeeper here
    http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/

  • IPod shuffle does not appear in iTunes

    New iPod shuffle does not appear in iTunes on my iMac!

    Hello Yvonne,
    We've an article that provides information and troubleshooting steps which can help get your iPod to appear in iTunes.
    iTunes: iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/TS1410
    Cheers,
    Allen

  • My iPad does not show me iTunes Radio with the new iOS 7 update

    My iPad does not show me iTunes Radio with the new iOS 7 update

    Hi, Abhishek642. 
    Thank you for visiting Apple Support Communities.
    If you are a U.S. customer try forcing all applications to close and power cycle the device.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If the issue persists, try signing our of the iTunes & App Store on the device and signing back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    For more information on iTunes Radio and it's availability, see the article below.
    About iTunes Radio
    http://support.apple.com/kb/HT5848
    Cheers,
    Jason H.

  • Podcast artwork does not show in ITunes store

    I recently began producing a music podcast http://itunes.apple.com/us/podcast/felony-buddha/id375837423.
    I am using blogger http://www.felonybuddha.com and feedburner http://www.felonybuddha.com/feeds/posts/default?alt=rss.
    Initially I did not have the artwork url in SmartCast but I updated Smartcast
    on 06/04/2010 with this url http://4.bp.blogspot.com/PuXcBmmd7sY/TAmrnudmrHI/AAAAAAAAAAM/W8kCV6S3N2U/s1600/iStock000010405007XSmall.jpg. I sent a Ping but the podcast artwork still does not show in Itunes store.
    What am I doing wrong? Thank you for your help.

    The Feedburner feed is probably OK: it does have the declaration and the correct image reference.. As there are no line returns separating the tags it appears either as one or two long lines or as a slab of text, so it's very difficult to read, and you might want to go through your original feed if you can, and put some line returns in.
    Assuming it to be OK, you have two possibilities: both involve you editing the original feed.
    For clarity let's label the feeds;
    Feed 1 is your original, http://www.felonybuddha.com/feeds/posts/default?alt=rss
    Feed 2 is the Feedburner-generated one, http://feeds.feedburner.com/felonybuddha/MhvA
    Method 1: amend feed 1 to contain the necessary tags. The top section of the feed should read:
    <?xml version='1.0' encoding='UTF-8'?>
    <rss xmlns:atom='http://www.w3.org/2005/Atom'
    xmlns:openSearch='http://a9.com/-/spec/opensearchrss/1.0/'
    xmlns:georss='http://www.georss.org/georss'
    xmlns:thr='http://purl.org/syndication/thread/1.0' version='2.0'
    xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
    <channel>
    Then in the top section of the feed, after 'channel' and before the first 'item' tag, add:
    <itunes:image href="http://4.bp.blogspot.com/PuXcBmmd7sY/TAmrnudmrHI/AAAAAAAAAAM/W8kCV6S3N2U/s1600/iStock000010405007XSmall.jpg" />
    making sure you don't get this inside another tag (and there must be no line breaks within this). There are still other tags missing, which though they aren't essential, ought really to be there.
    Method 2: this might be preferable - redirect iTunes to Feed 2. Feedburner does add a lot of garbage to the feed (intended for compatibility with other rss readers) but they shouldn't cause any problems; however there are some caveats, see below. The method:
    You will need to add the following tag to Feed 1, after the 'channel' tag and before the first 'item' tag:
    <itunes:new-feed-url>http://feeds.feedburner.com/felonybuddha/MhvA</itunes:new-feed-url>
    Before doing this you should read this Apple Tech Note just so that you are completely clear what you are doing.
    Re-upload the feed and leave it there until iTunes has changed to the new feed - this may take some days. To check whether it's changed, go to the Store page for your podcast, click on the 'Subscribe' button, go to the 'Podcasts' section in the sidebar, and click on the 'i' button on the extreme right of the line for your overall podcast (not the episode). The pane which pops up contains the feed iTunes is using.
    Caveats:
    Make sure you get the URL exactly right in the redirect. If you make a mistake *you will not be able to get it back* once iTunes has redirected.
    Be aware that once you have transferred to Feed 2 you cannot edit that feed directly, only the feed you submit to Feedburner. This may possibly mean that if you later want to redirect to another feed you won't be able to.

  • I installed Windows 8 and now my ipad does not show in itunes...any thoughts?

    I installed Windows 8 and now my ipad does not show in itunes...any thoughts?

    Not trying to start any argument here, but if you would have checked the requirements for using an iPad with iTunes on a computer, you would have seen that Windows 8 is not supported.
    Apple ID (required for some features)
    Internet access6
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 2 or later
    Download iTunes at www.itunes.com/download
    http://www.apple.com/ipad/specs/

  • Shuffle does not appear in itunes or under my computer

    Brand new shuffle does not appear in itunes or under my computer

    Hello Chefdave514
    Check out the article below to get the troubleshooting steps for the appropriate operating system that is on your computer.
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    Regards,
    -Norm G.

  • HT1923 Hi, I have a iPod touch 4th generation and I does not show in iTunes. It comes up as charging when it is plugged into the computer but just not in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

    Hi, I have a iPod touch 4th generation. It comes up as charging when it is plugged into the computer but it does not show in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

    Try here  >   - http://support.apple.com/kb/TS1369.

  • My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

    My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

    :-) the problem is solved. Thanks to a great typ in one of the other discussions with alt+cmd+S iTunes looks again like something I recognize. After removing the iPod from iMac and also from the connecting "holder", turning it on ad off, rebooting the iMac, maggic happens and the iPod now shows in iTunes and everything works just fine.

Maybe you are looking for

  • Filtering XML records while bursting - processing only a subset of the data

    Hi I'm attempting to filter the records in my XML data while bursting, so that depending on the value of a data element, the entire record is either skipped or included in the burst output. I only want a subset of the XML output to be included in the

  • Need to repair disk - what do I do????!!!

    I've done a check on the disk utility and it says the following: "Volume Header needs minor repair The volume Apple Hardrive needs to be repaired. Error: The underlying task reported failure on exit 1 HFS volume checked Volume needs repair" However i

  • What is "abstract schema" in CMP 2.0

    I saw this word in the configuration dialog of J2EESDK 1.3. What's that?

  • Domain and  Types

    Hi, I'm using Data Modeler 3.1.4. I created a logical model with entities. Each entities has a primary key named 'Numero'. I want to have the same type for all these columns . So I created a domain with Integer as logical type (no precision). Since I

  • How to encode queryString ....help pls

    hi, can any tell me how to encode queryString in jsp. itz urgent thanks