My shuffle is in comma, plz help!

some days ago i made a mistake connecting a power adapter inside my ipod headphones input thinking it was the minijack connector of a stereo.
after i realized i was doing the wrong thing, my ipod was still working but when i stopped using it and tried again the only thing it does until now is blink both amber and green lights but very very dim when i press any button. another thing that happens is that my pc doesnt recognize any hardware when i connect it and the baterry button doesn't work anymore. i guess i maybe burned it inside, lol.. but like anyone, i hope it can work back again.
if anybody have done such think like me, and brought his ipod back to life, could you please tell me how?
and.. if you dont have answers for me, how can i open my ipod shuffle without harming it?
i would apreciate your replies very much, thanks
Ipod Shuffle   Windows XP Pro  

Don' despair if you get this problem!
I had the same problem, Iphone4 would not turn on, when I connected it to Itunes it asked me to recover, including downloading new software and that I would loose all data (and the Itunes was up to date).  There did not seem to be any alternative so I did try to restore to the original factory settings, but the downloaded software turned out to be incompatible with my Iphone and therefore was not installed -- fortunately!!!
Because when I then tried to simultaneusly press both the on/off button at the top, and the enter button at the bottom of the front screen -- holding them pressed until the Iphone responeded (in my case maybe about 10 seconds...)  -- then suddenly the phone restarted - !!! and now works again 100%.  And I lost nothing that was stored on the phone!!  So this hard-boot worked, but I had to keep the buttons pressed for a long time (the first time I tried this it did not work, probably because I did not press them long enough).

Similar Messages

  • Shuffle wont connect to computer - plz help!

    i have had my ipod shuffle for only 3 months. i have updated it to the latest ipod software, and have the latest version of itunes. when i try to upload new songs onto my shuffle, the shuffle doesnt stay connected long enough for the songs to start uploading. the shuffle continuously connects and disconnects itself, even though the whole time it is connected to the computer. i have also restored it to factory settings. plz help!

    maybe its your USB port !!!
    try another one

  • Had 1418 error.formatted as fat.not fat32.now ipod doesnt work.why?plz help

    The iTunes keeps saying that:
    "The iPod "IPOD" cannot be updated. The disk could not be read or written to"
    "The iPod "IPOD" cannot be updated.
    And when I tried to restore it.
    "The iPod "IPOD" could not be restored. An unknown error occurred (1418)"
    thats a dreaded problem and i researched at many forums on how to solve it.....
    before reading ur reply....there were some other replies that i read.....
    which told me to format my ipod into fat partition...and not fat32 partition....then we had to update it and then restoring it would be possible........
    that was the only article which i came across and which had a solution to 1418 problem......
    so i began my work....
    but as soon as i formatted my ipod shuffle second generation into fat partition.......
    i restarted my comp...and then.the ipod is no longer working.......
    if i push it to on......then there is a constant green light on it which does not go off even if i connect it to comp. using the dock provided.......
    if i put it off,the green light goes off....
    ideally when an ipod shuffle is connected to pc..there is an orange light that starts blinking ,that shows that the ipod is being charged.
    but now when i connect mine.....
    the green light blinks only once......and then nothing happens...
    the device isnt working and so i cant even solve my 1418 problem ,as now i even have the solution.......
    help me plz....
    its really urgent....
    its been just a month my uncle gifted me this ipod ...he stays in north carolina........and i stay in india.....
    i dont even know if there are service centres of apple available in mumbai.and if they are,whether they are trust worthy or the ipod that i send to them might never to me and get stolen or something.....somebody might just keep it and say that its lost.......mumbai is not trustworthy.
    but if there is a recognized apple service centre then i would want to go there and get my ipod repaired....i have one-year warranty with me.......but i dont know if the warranty of a product bought in north carolina works in india......
    i cant throw this ipod....cause its my first ipod and it has hardly been time that i got it...its too early for me to throw it.....
    i dont know why the ****.....cant i connect it to the comp...
    i tried the following: after getting 1418 read and write error...:
    reinstalled the itunes 7.0.2
    reinstalled the drivers......
    reset the ipod shuffle...
    restarted my computer several times.....
    checked the cable....
    plugged the usb cable onto another port...
    scanned the comp for viruses......
    now the only thing left is that i think.....there can be a problem with the jack where the dock is plugged.....
    maybe thats the reason my ipod isnt working...
    even if i formatted into fat partition rather than fat32 partition,it should atleast be connected......
    should atleast charge.....
    should atleast be detected......
    my ipod is not even getting detected by the comp as any unknown device also.....forget as an ipod....
    i just shouldnt have formatted it...
    although i think....that formatting it did not lead to this problem......
    please help me.......
    urgently...........
    plz.....
    plz......send ur reply fast..plz help me.........
    get this ipod to work......
    i will fix the 1418 error myself....
    just get this device to work....so that comp starts detecting that i have connected something thru usb.....

    On top of the two suggestions already given, make sure that the drive letter being assigned to the ipod when you plug it in in windows is not also a drive letter being assigned to another drive. I've heard that this happens occasionally and can cause all kinds of conflicts, from problems you are describing to lockups when trying to sync.
    I would also try it on a different computer to see if that helps. Maybe you've got a friend or a computer at work that you can install itunes on and give it a shot there. This will let you know whether it's a problem with your specific computer or if it's a problem with the ipod.
    The fact that it runs in Windows and you were able to reformat the flash memory stick tells me that the Ipod is working, but that something on your computer is not.
    P.S. Obviously you've had it for 90 days, So I must assume that the USB port is working correctly. Otherwise the Ipod's battery would have drained by now. So I don't believe it is a hardware issue. So move past that for right now and look to your computer's settings for the answer.

  • Plz help me,i did everything and nothing has worked,im going insane!!!

    Hello people,for months ive tried fixing my i-pod and nothing has worked....i try to restore my ipod maybe that would fix da problem but when i press the program,it says ipod service error,and before that it worked ok,it said preparing and stuff but it never stoped perapring the ipod it just got stuck,and in my itunes i see my ipod,but i cant put no music in it?Therefore i have the 2 colour lights all the time when i try to play it.and also when i try to update my ipod with the program u download from the net it says in the end of the installation:Service could not be deleted.All these problems,could someone plz help me,im turning insane!And i cant refund my ipod because i lost my recite and also the store isnt anymore there(My luck)but plz somebody answer me,thank u

    I believe the green and orange light flashing means that you have no music on your iPod Shuffle (which seems correct as you have performed a restore). That is the way the iPod Shuffle tells you that it is looking for the next song. When the iPod Shuffle is plugged into your computer (XP user myself) the orange light is suppose to flash on and off (both the battery light if charging and the front light). When updating the iPod using the updater, I received the same error you received (iPod service error), but I believe it was because I was trying to update my iPod with the Sept 05 version when the iPod already had the Jan 06 update on it. I also noticed the "preparing" bug that you mentioned, by simply selecting next, the restore continues correctly. Once I restored my iPod to the factory settings AND performed the restore process THREE times using the Sept 05 updater (what came with my iPod Shuffle) I was able to store music AND listen to it once disconnected from my computer. My next task is to update the iPod with the Jan 06 update and try the process again but I believe there is a driver issue with this version and it may not work. If this is the case, I will just stick with the software received with the iPod. For you, I would attempt to reinstall the software from the CD that was provided with you iPod Shuffle, restore your iPod Shuffle to the factory settings and do this restore THREE times, start iTunes, once the iPod Shuffle shows up in the Source listing right click on it and select Update. Make sure songs copy over (the top centre of iTunes will tell you the status of the update) and finally disconnect and try playing music.

  • Broken !!!! How much for a replacement ???????????? PLZ HELP MEEE ???? PLZZ

    Hi,
    I was on my bike, i fell and landed on the ground with my ipod shuffle in my pocket, when i took it out, to my horror the screen was cracked and did not display anythin.
    does anyone know how much it would cost to replace the screen on my ipod shuffle ?? Plz help me guys and gals !!! PLZZZZ
    im beggin
        Ipod Shuffle 512mb

    Shuffles don't have screens.

  • Plz help prob with a query and.. a trigger

    hi..
    1)i've created a view.gave the commit..
    now when i execute this query i get no rows selected...
    sql>select text from user_views where view_name='d1_v';even when i give sql>select * from user_views; all i see are column names and nothing else..
    do i need to grant my user any privilige. my user has create any view privilige.
    2)
    is it possible for me to create a trigger that updates records by itself for every 6 months by adding 1000 to the sal field
    i tried
    create or replace trigger after logon on emp ..............like that
    but i receive an error saying system triggers cannot be based on tables or views..
    plz help me out..
    thank u
    rajiv

    1. Try "select text from user_views where view_name='D1_V';
    BTW, no need to use "commit", CREATE VIEW is a DDL command, and DDLs do implicit commit.
    2. Why do you want to use triggers ? You can do that in at least two other ways : cron jobs and Oracle jobs.

  • Error while opening a module. plz help me, very urgent.

    when i try to open a module, the following error message appears on my screen.
              " no j2ee component found in d:\krisp\programs\servlets".
              i've installed bea in c: drive and my servlet program is in d: drive.
              plz help me, it's very urgent.

    Can you provide some more information? What were you doing when this happened?
              Can you post the entire error message?
              -- Rob
              WLS Blog http://dev2dev.bea.com/blog/rwoollen/

  • Hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder go it says this file doesn't exist. can some1 plz help?

    hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?

    Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
    Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
    Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
    Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
    This is what you should properly seeing (but with different apps listed):
    See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen.

  • How to select the download location? its automatically downloading to users folder in c drive. i wanna change it..plz help me out......

    how to select the download location? its automatically downloading to users folder in c drive.. i wanna change to my desktop...plz help me out...

    Tools -> Options -> Save files to -> Click browse button and browse for folder where you want to save the file.

  • How to print text/data in flex 3 using printer???Plz help...

       Hi,
              plz tell me the way to print text/data using printer in flex.  I tried the FlexPrintJob class. but it takes object of a container to be printed & prints the visible content of that container(along with scrollbars), bt i want to print all contents of the container(including invisible).
          I have tried to print bitmap image through FlexPrintJob but it takes lot of time for spooling... So plz help me out in printing(fast with all content) in flash
    I am using flex 3 (flex Builder 3 IDE).
      Thanks in advance!!!

    Hi Sagar,
    Don't worry You can use the below work around to print all the contents of the Container including the invisible contents under scrolll with out scroll bar..
    So what the idea here is we are seeting the container height to full size with out scrolls before sending the container object to printer and as soon as you print the object you are restoring it to the original height with scrolls...so that you can print the full contents without scrolls...
    You may have doubt that by chnaging and restoring the size the user may see momentary resize of the container but it is not so as it is a fraction of a second and user cannot notice this change... Give it a try ..I had already run into this problem recently and I have found a work around for this which is as below:
    // Here mainContainer is the container or box id the contents of which you want to print
       private function doPrintContainer():void
        var printJob:FlexPrintJob = new FlexPrintJob();
        if(printJob.start() != true) return;
        try
         var mainContainerHeight:int = mainContainer.height;
         //Increasing the height of the desired component to be printed.
         mainContainer.height = mainContainer.measuredMinHeight;
         mainContainer.verticalScrollPolicy = "off";
         //Adding the resized Component to our FlexPrintjob and then sending the print request
         printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);    
         printJob.send();
         //Resizing the component back to normal size
         mainContainer.height = mainContainerHeight;
         mainContainer.verticalScrollPolicy = "auto";    
        catch(error:Error)
                     trace("Error : " + error.message);
    If this post answers your question or helps, please kindly mark it as such.
    Thanks,
    Bhasker Chari

  • My ipod touch 5th generation wont download apps and let m e use them!!! Plz Help me fast!

    I have an i pod touch 5 and I try to download a new app from the app store so i goto the app store and click download then click it again to install it and it installs but it dont leave an app icon on the home page so i go back to the app store and it says open in a ble box so i click open and it dont open it just keeps saying open and it wont open! please help me!!!!!!!!!!!

    I ment blue not ble sorry but plz help!

  • Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

    Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

    You said you updated yur 1G iPod to 4.2.1. A 1G can only go to 3.1.3 and thus you must have jailbroken it to get to 4.2.1 and that can cause problems.
    ArealDJ wrote:
    I have the same problem.. apps won't download and won't open. I have a 1st Gen ipod touch and recently upgraded my MacBook Pro (2012) and as soon as I upgraded the iPod Touch to 4.2.1, this happened. I restored to factory defaults and still cannot dl and open apps. Any way to diagnose this problem? Apple tech charges $29.99 for out of warranty products and if I am reluctant to pay with them telling me its simply a hardware problem.

  • I restored my Macbook Pro and now I can't log in as Admin - it says there is an error with FileVault and I don't have access - plz help!  thank you.

    I had to restore my Macbook Pro from Time Capsule yesterday and now when I go to log in as my usual Admin, it says there is a FileVault error and my access is denied.  I created another temporary Admin acct, but everything I had on my desktop, etc is "gone"  I can look up the "drive' or wahtever it's called, but I can't access any of it.  All I want to do is log back in as my usual self (the regular Admin) - plz help!  Thanks.   p.s. I"m (obviously) not that computer savvy!

    Triple-click the line below to select it:
    /System/Library/CoreServices/Directory Utility.app
    Rght-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu.* The application Directory Utility will open.
    In the Directory Utility window, click the lock icon and authenticate. Select the Directory Editor tool in the toolbar. Select Users from the Viewing menu in the toolbar, if not already selected. Select the affected user account in the list. On the right is a list of properties and values. Select the property "HomeDirectory" and delete it by clicking the minus-sign icon directly below the property list. There are two such icons in the window. You want the one on the right, not the one on the left.
    CAUTION: Do not click the minus-sign icon on the left, below the user list.
    Then click the Save button in the lower right corner of the window. Quit Directory Utility.
    CAUTION: There is no "undo" in Directory Utility. If you make a mistake and delete something in the Directory Editor that should not have been deleted, restore your whole system from a backup and start over. I have no other help to offer in that case.
    Try again to log in as the affected user. If you can log in, you should find a file in the home folder with the name of the user and the filename extension "sparseimage" or "sparsebundle". Double-click that file. A disk image should open. Copy your files from that disk image to restore them.
    I strongly suggest that you deactivate legacy FileVault in the Security & Privacy preference pane, then log out and log back in. Consider activating FileVault 2 if you want that kind of security.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • Error in variables,plz help me

    I created a variable del_var.The sql query assosiated with this variable is.
    Delete from schema.file_name_table where rownum=1;
    After refreshing it.it is deleting first row in the table.But it is resulting in an error
    "17003 : null : java.sql.SQLException: Invalid column index java.sql.SQLException: Invalid column index "
    Plz help me

    Hi,
    You can't use a 'Delete" command at a refreshing variable because at a refresch the variable need to receive a value back and the delete doesn't return value.
    Change the command to "select....."
    Does it make sense to you?

  • Not able to access webservice after migrating from 8.1 to 10.3,plz help

    Hi All,
    Prev our application was running in weblogic 8.1 and now we moved to 10.3
    We are able to deploy our webservice in 10.3 and access the wsdl but we are not able to access the webservice from the client.
    Even the testclient is not comming up.
    After spending long time in that,now i dont have any clue on this issue.
    Plz help on this
    Thanks ni advance,
    Mouli

    Sunil,
    We are not seeing any exception.We regenerated the webservice and then deployed in the 10.3
    When we make req from the client ,we are getting null response but thing is there are no log trace in the server side for that
    folllowing is the input string we are pasing to the method notifyservice
    IN the client we pass the wsdl url and then pass the following input string and hit the notifySerivce method
    Req:
    <?xml version="1.0" encoding="UTF-8" standalone="no"?><object><GLCCode>102431</GLCCode><callBackNumber>888256798</callBackNumber></object>
    Res:
    <m:notifyService xmlns:m="http://www.testportal.com/outbound/tsp/WowWebservices">
    <result xsi:nil="true"/>
    </m:notifyservice>
    Therre was an exception in the client side,plz check below
    javax.xml.rpc.soap.SOAPFaultException: Failed to get operation name from incoming request
    at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:317)
    at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:147)
    at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:473)
    at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:459)
    at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:569)
    at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:422)
    Thanks For your time,
    Mouli

Maybe you are looking for

  • ABAP Runtime Error in [VL01N]

    HI All, Kindly suggest some line for the followings While doing PGI (Posting Goods Issue) in delivery at t.code [VL01N] there is an ABAP Runtime Error And some part of the analysis is Information on where terminated: Termination occurred in the ABAP

  • Issues downloading Photoshop CC

    Hi all - I'm running on a Macbook Pro with OSX 10.6.8. I purchased a Creative Cloud membership in June for my freelance work and successfully downloaded Dreamweaver CS6 at that time. However, when I went to download Photoshop CC, I got the following

  • Incomprehensible error (regex)

    Hi all, There I was, happily tap-tapping away in Java, sipping on my Diet Coke and wondering if tonights episode of The Simpsons would be one I'd seen or not, when blam!.....Up pops this error, which means nothing to me (since I've not really covered

  • Problems with connection to the Mountain Lion

    Someone is having problems with connection on Mac Mountain Lion? I did a clean install and the connection is unstable.

  • Canon 5D Mark III wont power up

    I just brought home my brand new 5D Mk III, charged the battery up, mounted the lens (24-105), inserted the CF card and then the battery.  Switched it on and no sign of life at all.  Removed the battery, lens and CF card and then re-installed the bat