My Shuffle will not play any songs
my shuffle will not play any songs. when i turn it on the green light stays on for about ten secs and nothing happens. it is the same way when i switch it to the last swtich thing. i have reset it and restored it and updated it and nothing seems to work. it was working fine 2 days ago and it started yesterday to give me problems. any suggestions would be greatly appreacated.
Just try charging it properly, make sure you're inserting it into a proper high-power usb port (and not necessarily a high speed usb 2.0 ) and you can make sure its charging if the light turns amber (orange). You should leave it to charge for 4 hours the first time (from 3 to 6:16 isn't enough), until the light finally turns green, or until u get really bored!
Similar Messages
-
Have 60 gig ipod classic will power up will go to songs but will not play any songs just sits there on 0 I can fast foreword but it still will not do a thing just sits at new spot in song and will not play , help please.
Update!
This is what I did to fix both the skipping songs problem and the iPod verifying forever & not able to restore problem (because of iTunes 9):
a) I used Disk Utility to reformat my iPod while in Disk Mode using the instructions here:
http://support.apple.com/kb/HT1363?viewlocale=en_US
and here:
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml#backup
b) Do not unplug your iPod after reformatting (mine showed up as a firewire disk) - simply launch iTunes ( I went back to 8.2) and follow the Restore instructions here:
http://support.apple.com/kb/HT1339
iPod is recognized, syncs and doesn't skip songs anymore after that miserable experience with iTunes 9!!! -
Itunes will not play any songs/videos; also, videos wont tranfer to iPod.
This problem started a couple of days ago; It started after I downloaded 6.0.2... There were a bunch of problems to my computer because of that, although they might not have been related. In any case, I ended up using system restore 3 times and uninstalling/reinstalling itunes quite a bit.
Now my computer's back to normal, except one thing: iTunes. Its acting... funky. Weird. It wont play any songs/videos on iTunes itself, which is annoying but I don't mind it as I just use my iPod... EXCEPT that it wont transfer ANY videos to my iPod. NONE. Even the old videos on it were erased as iTunes said that "They can't be viewed". I KNOW these videos work on my iPod as I converted them to specifications and plus, I've seen most of them before on it (Also, I have a few music store bought videos and they wont transfer either). It seems to be a deep rooted technical problem inside iTunes, but I can't seem to fix it.
I've repaired/reinstalled/completely uninstalled, wiped reg. values with a cleaner, and it STILL doesn't work...
I need help. This problem is weird, and I'd like it fixed. I want to see videos again...
Windows XP
Windows XP
Windows XPIf anyone else can't play songs from their device in iTunes, try steps below which solved my problem:
Be sure your device is selected.
Right Click anywhere on Contents screen.
Select "Reset Plays" your selected song(s) should begin playing.
The "Pause, Play etc" buttons are no longer greyed out. -
Hello everyone.
i have a 15" MBA circa 2011 running Lion 10.7.5 and my sound has gone, There is a no sound circle on my volume display and in system preferences sound my options for output is empty. At the same time this happened I noticed 2 things: 1) itunes would not actually play any audio track and every video i streamed stopped after a few seconds (usually 11s) but not always.
I have tried following some tips I have found online like going into MIDI and fixing the problem there, restarting in safe mode. Resetting with PRAM (or something that sounds like that).
Does anyone have any insight on this? At this point i'm thinking it's time to reload Lion but I don't really know how to go about that without losing all of my files.
Please Help
ThanksHello JaboorMBA2011,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Have a nice day,
Mario -
It Just Happened Recently, As Soon As I Plug In My HeadPhones, It Stops Playing. When I Select A Song, It Seems Like Its Going To Play, But Returns To The Home Screen. But When I Take The HeadPhones Out, And Play A Song, It Plays Like It Use To, Im Really Confused.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
To find SN:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
2Gen iPod Shuffle Does Not Play .m4a Songs
My 2Gen iPod Shuffle 1GB only plays songs that I purchased from iTunes (.m4p) and will not play any songs that I ripped to iTunes (.m4a). According to iTunes, I successfully transferred 80 songs on to my Shuffle. Under the Settings tab, it shows that all the songs are loaded and I have plenty of capacity available. Under the Content tab, all my songs are listed. I have the latest software version and have reset twice with no success. My iPod Classic plays the songs fine. I appreciate any help or suggestions.
Ian - thanks for your input. My bit rate was well under the limit. This is what I've found out so far. The songs that my iPod Shuffle do not play are the (.wma) songs I converted to (.m4a) using EasyWMA. The converted songs work fine on my MacBook iTunes and iPod Classic, but not the iPod Shuffle. I contacted EasyWMA and it was suggested that I convert the selected songs to either (.mp3) or AIFF. As an experiment, I converted some (.wma) songs to AIFF using EasyWMA and had iTunes convert the AIFF files to (.m4a). Interestingly - it worked. I have no idea why the Shuffle did not recognize the EasyWMA (.m4a) direct converted songs (especially since the iPod Classic and iTunes had not problem playing them) - but apparently the iTunes conversion does something that the Shuffle software requires. Still a mystery, but at least I now have a much wider assortment of music on my Shuffle than I started out with.
Thanks again - George -
iPod will not play any music. Seems like it is in “Pause” mode. No sound from either the head phones or internal speaker. I have 418 songs stored and none will play. I have tried resetting, turning on and off the iPod, etc. but to no avail.
Try restoring from backup. Next would be a restore to factory defaults/new iPod.
-
I just bought a song and my ipod shuffle will not play it.. how do i get my money back from the song??, I just bought a song and my ipod shuffle will not play it.. how do i get my money back from the song??
Assuming you bought the song at the iTunes Store, you can go here
http://www.apple.com/support/itunes/
and follow one of the "paths" to get what you need or to an Apple customer support employee. One path is to click Contact Support at the bottom of the list of choices, and use the Express Lane.
The iTunes app also has a way to report a problem with a purchase. Select iTunes Store in the sidebar (of the iTunes window). Toward the upper right corner, click on your Apple ID. This gets you to your Account Information screen. Find Purchase History and click See All. On that screen, you can select a specific purchase with that problem, and Report a Problem.
If you want to try to figure out WHY that song does not play on your iPod shuffle, please post back... -
Deauthorized all computers from my account. Which now I think I should have not done!! I reauthorized mine only BUT now I can no longer play any new songs purchased without it asking me to authorize my computer?? When I authorize it tell me my computer IS ALREADY authorized?? And still will not play any new music I purchase. PLEASE somebody help??
Check if this article will help:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389 -
Itunes 6.0.5 will not play ANY files
Hi. I just upgraded to version 6.0.5 and itunes will not play any of the files in my library. No error message or file location error is diplayed when I try to play a file. The song title is displyed in the main window, but the file does not progress.
I tried to troubleshoot it myself with apple support, but only found some information about checking the compatilibity mode settings --that was not the problem.
Anyone else experience this? I'd really appreciate any suggestions or information on how I can solve this problem. Thanks a bunch!is the little diamond-shaped thingy staying firmly stuck to the left, raisingirl?
if so, let's try a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes play music properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.) -
ITunes will not play music, songs stuck at 0:00
I know this is a frequent question as I've spent three hours searching through the support discussions here as well as elsewhere online, but none of the possible solutions I found posted worked for me.
The problem, if you're unfamiliar with it, is that iTunes will not play any music (either songs I've ripped or songs I've bought off of the iTunes Store).
I've tried updating iTunes and Quicktime, uninstalling and then reinstalling both, updating my audio drivers, playing with the preferences of both iTunes and Quicktime, made both programs the defaults for all associated file types, and rebooted countless times.
I'm on a 3-month old Dell Inspiron running Windows 7 if that makes a difference.
Any new suggestions anyone has or something random you may have tried that solved a similar problem would be greatly appreciated.
Thanks!I'm afraid the problem is more widespread than just iTunes and the update didn't fix it. There's a thread out there about users not getting any sound/audio in Lion after wake from sleep or just having it idle for a long while.
Hopefully, Mac OS X 10.7.2 will fix the issue.
Thanks! -
I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help
HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/
-
Windows 8.1 will not play any video in Video app, windows media player, Power DVD, or Picture
I just downloaded 8.1 and Windows will not play any of my videos. Power DVD will play the videos, but there is no sound. I downloaded a video from xbox video and that will not play on my computer either. I have a lenovo yoga ultrabook. I get error codes
0xc00d11d1 (0x8007007e) from Video and 20120820_082429 - Copy.mp4 in Pictures.Hi,
According to your description, it looks like you encountered a Graphic driver problem. Have you tried to reinstall Graphic driver for test? If not, please have a try.
If possible, also reinstall the sound card driver.
If problem persists, You can try to use System File Checker tool to fix your problem. Please refer to the following link for detailed operation.
http://support.microsoft.com/kb/929833
Roger Lu
TechNet Community Support -
I just updated itunes and now it will not play any of my music. What is wrong?
I just updated to the new version of itunes and now it will not play any of my music. It says that it is playing but nothing happens.
Hi ryanmar,
If you are having issues with audio playback in iTunes for Windows, you may find the following article helpful:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Regards,
- Brenden -
DVD Drive will not play ANY movies
I seem to have the standard drive for the 15 inch MacBook Pro (bought less than one year ago), but it simply will not play ANY movie DVD I've tried. It whirrs and whirrs but nothing happens. I've tried multiple movies and none have worked. Yet it works fine with software cd's and loading on of new programs, and burned CDs with pictures display just fine. I checked the System info on the drive and notice that the last line - which is media - had a 'no' next to it. Is it not turned on or programmed to play movies??? If so, how do I activate it? Thanks for any help.
My MBP plays DVD and says no also, so that is not it. Sounds broken to me. Call Applecare and I do hope you paid for the 3 year Applecare. Did it EVER play DVDs?
Maybe you are looking for
-
How do I install a 3rd Hard drive?
I have a 2000 Quicksilver that already has two hard drives installed. My question is, now that I have purchased a 3rd hard drive, where do I mount it? I see an open space below the CD drive and ZIP drive, but no mounting bracket/sled. Is there a piec
-
<blockquote>Locking duplicate thread.<br> Please continue here: [/questions/777244]</blockquote><br> I do not want recently typed pages in the URL Location Bar to remain there.
-
This is for Apex 4.0.2. I wonder if anybody else has come across this issue: after creating a named LOV in Shared Components and using the LOV on an item, I get this error: ORA-20001: Error fetching column value: ORA-20001: Query must begin with SELE
-
How do you edit the net settings while using zonecfg ? Example: I go in with 'zonecfg -z myzone', then can run commands like 'add net' and 'set physical', etc. Then I did 'end' and info and could see the settings, but now how do I edit the net set
-
Deployable Proxy not reachable
Hi everyone, I tried in previous post to solve this problem but without success. Here is the scenario : I deployed a "Deployable Proxy" that contains a web service. I create a Java Standalone class. I want to call this proxy and to use the web servic