My shuffle works fine but when I plug it in to charge nothing happens? Any advice?
I have just recently been given an ipod shuffle, I've uploaded all of my music, played it and it works absolutely fine. However now that the battery has run out, when I go to charge it it doesn't charge at all. I don't understand why it doesn't seem to be working. Any suggestions would be greatly appreciated.
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Similar Messages
-
I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.
what's creative cloud 6? do you mean cs6?
what version of acrobat pro do you have installed and what are you clicking to start it? -
My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?
Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Resetting network settings: Setting>General>Reset>Reset Network Settings -
Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it at all.
Without proper system information and the application logs nobody can tell you much.
Troubleshoot Creative Cloud download and install issues
Mylenium -
I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!
Hi MyAppleID99,
You may want to check to make sure the clip hasn't been moved back and forth between wide screen and standard aspect ratios; sometimes a combination of letterboxing and pillarboxing can lead to a black frame "windowbox" when playing the final video. You may find the following article helpful:
Apple Support: What are Letterboxing, Pillarboxing and Windowboxing?
http://support.apple.com/kb/ht2320
Regards,
- Brenden -
my 5th generation ipod won't sync anymore to my PowerMac G4. It worked fine, but when I installed a new hard drive it won't work anymore. I've re-installed iTunes, the latest version for Tiger, I've reset and restored my iPod. The ipod shows up fine in the source banner and I can transfer files to it, however when I unplug the iPod the files are not there.
Maybe try to repair the iPod's HD using Disk Utility located in the Applications -> Utilities folder. If that doesn't help, try a low level reformat of the drive using the same application. Make sure you choose Mac OS X Extended (Journaled) as the file system format.
B-rock -
The cord works, theusb port works, and when I plug my ipod into the wall charger it works, but when I plug it into the computer, nothing, not even charging. P.S. it worked before I updated it to iOS 6.1.5
You do have iTunes 10.7 or later on the computer, right?
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem? -
I just replaced my iPod 5th gen. a week ago, and it was working fine, but when I went to go turn the screen on, it wouldn't turn on. I've tried to put it on the charger and it wouldn't charge and it wont connect to my computer, how do i fix this? I tried to reset the iPod, by pressing the home and power button but nothing works. It's literally a brand new iPod, I dont know what to do now. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes. I have downloaded new Extension Manager for CS5. and still crashes. Anybody else experience this? email:[email protected]
Hi bigd_bud,
Can you see if the solutions in this post help?
Re: Adobe Extension Manager crashes on mac 10.8
Thanks,
Preran -
my iphone 4 has been working fine but when i try to use music, it wont work. For example i try to put a specific kind of song and it will either not play or skip to another.
read http://support.apple.com/kb/TS3217
-
I just downloaded 5.2 and both my Apple TV shows and movies won't come up. Hulu and Netflix works fine, but when I go to select a purchased move or show through the apple menu, spiral comes up for about 10 seconds and then brings me back to the main page
StagLemoore wrote:
Thank you everyone for your suggestions and help. Ended up logging out of my apple ID account. Of note, when I did I did a quick test and checked out both the movies and tv show options, and it all worked perfectly. I then logged back in, and now all my purchased and rentals are available which makes sense. I guess with the update there was some weird bit of trons that required one to log out then back in. Probably doing a rest in between may not hurt for some. Thanks again for all the assistance. Cheers.
It looks like there is a Apple doc for this problem here -> Apple TV: Unable to access Movies, TV Shows, or other iTunes features after updating -
Exchange 2010 Ative Sync working fine but when i do the test-ActiveSyncConnectivity it gives Error
Exchange 2010 Ative Sync working fine but when i do the test-ActiveSyncConnectivity it gives Error my internal and external domains are different i have godaddy certificate and i have redirected HTTP to HTTPS for OWA, but when i run the test-ActiveSyncConnectivity
https://mail.mycompany.com/Microsoft-System-ActiveSync it gives me error unable to connect to remote server, the connected party did not respond after a period of time because connected server failed to respond 67.57.66.23:443
From outside owa and activesync is working but my outlook 2007 SP2 shows disconnect every 25 minutes and then connected again when i see windows evenyviewer i am getting error that CAS Server failed to connect to mailbox server. Later it disconnected for
60 seconds, I think thats when outlook gives disconnect error to all users
Your quick help is really appreciatedHi,
Hope below KB will help you for resolution the issue
http://support.microsoft.com/kb/2469722
http://www.wiki-errors.com/err.php?wiki=443
Dinesh S. -
i bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message.
so i tried then to restore the iphone using itunes but it got worse it is giving me now "ICCID: unknown" message please help. any ideas?Please define "factory unlocked". The term is basically meaningless. iPhones are sold either carrier locked or unlocked. Some carriers will unlock them after a period of time upon meeting certain requirements and paying a fee.
There are lots of places that will "factory unlock" an iPhone. This basically translates to "hack". This can cause permanent damage to the phone. Best case scenario is these phones will re-lock to the original carrier on an update or restore. Worst case it they become expensive bricks.
ICCID unknown indicates a critical failure. There is no way to resolve this other than taking it in to Apple and getting the phone replaced. It's very possible that the phone was hacked and attempting to update has now killed it.
Where, EXACTLY, did you get this phone? -
My ipad will not swith on. It was working fine an hour earlier but when I press the power on button nothing happens. I have had it on charge just to be safe but no joy. This is a basic first version ipad. What options do I have?
Try a reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
-
my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help
Hello warhogs17,
After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario
Maybe you are looking for
-
Complaint with reference to R/3 Billing Document , Items not getting copied
Hi, I have implemented BADI CRM_COPY_BADI_EXTERN for pulling billing documnets which is working fine. But when I am creating a credit with refernece to billing doc fetched all other details are getting populated except Product, description into line
-
I need help on how to install adobe camera raw into my elements 11 will you help me please?
-
Restricting records in the select statement
Hi, I have one requirement where in i need to restrict my select statement to get only 250 records in the output table. Here are the select statements i am using.... SELECT a~ebeln a~lifnr a~ekgrp
-
I updated to the latest version of Leopard (10.5.8) and iChat and all of a sudden the audio stopped during video chats. When we're videochating everything works fine except that my friends can't hear me. I checked my mic on skype and it works fine. W
-
I have Lightroom 3 and have downloaded the DNG CONVERTER 8 7 1 to be able to open my CR2 files from my new canon 7d, however It still will not open my images