My silent button doesn't work

my silent button doesnt work what do i do?

Yes, take it to an Apple Store. It's working but sure not the way it was designed to!
Phil

Similar Messages

  • Stuck on apple logo and Home button doesn't work, help please?

    Well, I dropped my iPod Touch 4g by accident and since that day, the home button hasn't really been working that well. Its very hard to use since you have to press it in really hard to get it to work and sometimes it doesn't even work at all. Anways, I was skyping with my girl and I didn't notice that I had to charge the iPod and it died on me so I was like what ever its normal and started to charge it. When it turned on, it got stuck on the Apple logo and its been there for more than a day now? What can I do? I know about the Press Home + Sleep button together but the Home button doesn't work at all anymore. I tried everything really. I tried to connect it to itunes and see if I could restore it but it won't recognize it no matter where I connect it. Tried it on 3 different computers and none worked at all.  I can't take it to an Apple store since there isn't any close to where I live and I really don't have anyone to take me there. So is there any other solution to fix my problem at home? or is it messed up completely? Someone please help me

    I have this same issue. But also, it isn't just that the lock/home button stops working, all buttons stop working. Even if you switch it to silent sounds are still played. I just got my iphone Thursday. Went to school the next day and pulled it out, it happened while it was locked I guess because my screen was black and I couldn't do anything! Thought it died already! This was around 12. Finally I pulled it out of my pocket again at around 3 and it showed the Apple logo and acted like it had just started back up. Which is what always happens after I get stuck playing a game or something. Help please, has happened two or three times just today.

  • A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

    A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

    I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

  • Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

    Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

    Hi,
    thanks for your answer. 
    The Size of all disks is: 6 x 4 TB.
    In the Pool are 5 x 4 TB plus 1 x Hot Spare. 
    It comes up to about 14,6 TB of Data formatable.
    But tried it also with just 3 x 4 TB to see if it works. 
    I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine. 
    Here the results of my tests: 
    1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity. 
    new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
    But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only. 
    I added a screenshot: 
    Here you see my storage pool, and I added 3 virtual disk. 
    1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do. 
    About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
    As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
    The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD. 
    This is what properties shows on this volume. Always RAW. 
    I also tried Software Raid5 within the server. 
    This also worked fine. So really only parity. 
    Thanks
    Patrick

  • My screen if frozen and I can't shut off my phone. I already have my assistiave touch button on my screen but it still own't let me shut off my phone. And my lock button doesn't work either

    My screen is frozen on the camera and my phone won't let me shut it off. My lock button doesn't work and my assistance touch button won't let me shut it down either. My phone also takes hours to die and my battery if fully charged so i can't wait for it to die i need to get it back to normal asap! How do I get it to unfreeze?

    A reset is when you press and hold both the home and sleep buttons for 10 seconds or so until the Apple logo appears. You won't lose any data. Give it a try.

  • Volume and Power button doesn't work..how do I fix?

    My son's volume buttons or the power button doesn't work.  Is there something I can do to fix these issues?

    Try the following to rule out a software problem.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

  • "Submit to SAP" Button doesn't work

    Hi to all,
    I'm trying to develop an interactive form using NW04 SP22. My problem is that the submit to sap button doesn't work. I think I have not properly installed active component framework (ACF) on my client pc but I can't find the right ACF to install. I found a note 766191 in which I can download ACF for SP22 but  the link [url]https://sapmats-de.sap-ag.de/download/download.cgi?id=OZOHD0204MQQADJPWOZSGFDNCP39PBJ6TFA2CANJKUPYIGJF16[url]  seems not to work. Where can I find it?
    Thank you very mich,
    Enrico

    Hi Enrico,
    You can download it from the below link:
    http://www.esnips.com/web/arafatfNewFolder/
    Let me know once you are done so that I will delete the link.
    Regards,
    Arafat

  • Can't Add Credit Card (submit button doesn't work)

    Hey. Recently come across a problem trying to add my credit card so I could buy a Twitter app that works with Twitters new authorization.
    The submit button doesn't work. It is still there, but it is unclickable, it doesn't load up anything, or do anything. It doesn't change to being clickable at any time.
    If it helps, I have the Palm Pre, I'm with O2 (UK).
    Can anyone help?
    Post relates to: Pre p100ueu (O2)

    This sounds like a credit card related issue. Has anything about your credit card changed, like a new expiration data? You can go to App Catalog, tap the drop-down menu, select Preferences and Accounts, then choose the account name, enter your profile password, tap continue, When the Edit Credit Card screen appears, re-enter the credit card number and confirm that the remaining info is valid or enter any new information, then submit.

  • My iPod touch 4th gen white's home button doesn't work the first time I press it, but the second time.

    My home button doesn't work the first time I press it, but the second time.  This is very annoying.  Why is it doing this?

    - Try a reset. It cures many ills and nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    -If a hardware problem see:
    fix for Home button

  • HT4527 I want to move all my iTunes from old PC to new PC but Home Sharing on both and it works.  At Step 11, I clicked Home Sharing Import button doesn't work.

    Help!  I want to move all my iTunes music, podcasts, etc. from an old PC to a new PC. I set up Home Sharing on both and it works.  I followed the steps in http://support.apple.com/kb/HT4527 to the letter.  At Step 11, I clicked on Home Sharing on my new PC, then Edit > Select All so I could then import everything to the new computer.  No matter what I try, the Import button doesn't work.  There are two buttons on the lower right hand side of the iTunes screen - one for Settings and one for Import.  The Settings button is clickable but the Import button isn't even live.  In other words, I can see it but not click on it.  I have double-checked my firewall and it is not the problem.  How can I get the Import button to work? 

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?

    Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?

    Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.

  • I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

    I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

    Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
    Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

  • USB mouse button doesn't work on MacBook Unibody

    Since the trackpad was not working, we have to use a USB mouse to navigate. After a few minutes, the mouse left and right button doesn't work. I can move the pointer around the screen and use the keyboard.
    Thoughts

    The same problem happens with a Bluetooth apple mouse. You can scroll up, down and use the secondary (the right click) The problem normally developes after the MacBook has been running for a while and gets hot underneath.

  • Hi! I bought my iPhone from USA and the power button doesn't work. I have warranty. I will come to UK soon. I wanna learn; can i benefit my warranty in UK?

    Hi! I bought my iPhone from USA and the power button doesn't work. I have warranty. I will come to UK soon. I wanna learn; can i benefit my warranty in UK?

    The warranty is not and has never been International.  Warranty and support are only valid in the country of origin.  The only exception is for devices sold in the EU where the EU is treated as one country for warranty and support purposes.

  • The screen doesn't work except on the bottom and i cant reboot it because my power button doesn't work, The screen doesn't work except on the bottom and i cant reboot it because my power button doesn't work

    I was in the middle of texting my mom and the screen stopped working! It only stopped working in the middle but i can't even turn it back on because my password numbers won't work when i touch them! I also cannot reboot my ipod because the power button doesn't work! I need help on fixing this problem please!!

    Try as best you can with broken button.:
    - iOS: Not responding or does not turn on
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Mail not loading new gmail message

    I have Apple Mail 4.3 and since 22 November it is not loading new gmail messages. New messages are appearing in gmail and iphone, but not in Mail - any ideas why this would be

  • Aperture Gallery with iWeb

    Hello, Perhaps this is more of an iWeb question than an Aperture question, but as I long time Aperture user, I thought I'd post it here. My question is: Can you integrate Aperture/Mobile Me galleries into iWeb? If so, do they maintain their formattin

  • Code completion for JavaScript included?

    Will there be features like automatic code completion or automatic adding of closing brackets for JavaScript Code  or automatic adding of closing tags in html? (Or did I just not find them?)

  • Two content canvas in single window

    Hi friends, Possible to put 2 content canvases in a single window, when im executing i should get both canvas display( if i adjust the size of canvas). Regards Veekay

  • OT: JavaScript Question (Remote Control Linking)

    I retrieved a really cool JavaScript function from a trashed website, but it's only partially functioning, and I can't figure out what the solution is - though it's probably pretty simple. Imagine a web page named World.php that features a series of