My sister keeps getting my pictures saved into her photo

My sister keeps getting my pictures saved into her photo album. I have an iPhone 5 she has a 4. We don't share a photo stream or an Apple ID so I don't know why it keeps happening. Any help would be greatly appreciated thanks in advance.

WELL... UNLESS ... her photos and your photos are saved somewhere on the computer you share, and you import all photos off your computer, and dont check the source locations you might find stragglers appearing
also depends too if the computer uses one itunes account and recognizes your phone, which it shouldn't, but if you sync via itunes with one account, that accepts both phones, its possible.
but in camera roll, i'm not sure if she's differentiating where her photos are located at all. if she can tell the difference between camera roll and albums in the iphoto, then you can rule out camera roll as the place where the stragglers are appearing.

Similar Messages

Using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV

using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV -
any advice?

3GB for a movie? That's almost equivalent to an original DVD.
Have you checked in the Recently Added playlist?
I think this is possibly linear. Select 'normal' in HB, iTunes accepts it; select 'high quality' in HB iTunes doesn't. I can't say why; I don't have any video that anywhere approaches 3GB in size. If that's how iTunes behaves I don't see you have too many options. You either select normal and it works, or you select HQ and live with playing the movie outside of iTunes.
I won't ask what movie because any help with illegally ripped copy protected DVDs is strictly prohibited by the Terms of Use so I'm assuming this is a 6 hour video of your puppy playing on the floor.

Using iphone to print to hp 8500a plus, but cannot get the picture centered on the photo paper

using iphone to print to hp 8500a plus, but cannot get the picture centered on the photo paper installed hp photo app on iphone to utilize printer

Are you using Page Setup within Firefox?
https://support.mozilla.org/en-US/kb/how-print-websites#w_changing-the-page-setup
See - Margins and Header/ Footer

Keep getting Error Message (-39) Cant synce Photo's to i-Phone

Keep getting Error Message (-39) Cant synce Photo's to i-Phone.
I've tried restarting my computer, powering down my i-Phone & shutting down i-Tunes but nothing works.
Plus i cant email photo's from my i-Phone either.

Can you do a manual back up by right clicking on the iPhone in the left pane and selecting backup?
Also, have you tried restarting your iPhone? If not, hold down your sleep and home button until the screen shuts off then let go of the buttons. Wait a few seconds and then press the sleep button to turn the iPhone back on. Try to sync now.

HT201303 I have had my ex wife take my Ipad I keep getting my password reset by her on my apple ID ,about 3 hours after I reset , I have checked everything and I can only now assume that she is seeing this on my ipad through my alternative apple Id andrew

Hello I have had my i pad taken by ex wife and now My apple id password keeps getting re set within a short time few hours by her how can I stop this

You could set up two-step verification:
http://support.apple.com/kb/PH14668
http://support.apple.com/kb/HT5570
With this you need two out of three things to change the password: your password, your 'trusted device' (i.e. your mobile phone) or the 'recovery key' Apple will send you which you should keep safe (not on your computer).
Then you can change your password and lock her out. Note that if you lose two of the three things you will be locked out and no-one can help you. I should do this promptly before it occurs to her to do it and lock you out.

Getting my pictures back into my camera roll

so all of my pictures are backed up on my phone but some are no longer in my camera roll!! how should i get them back?

If they were in your camera roll when you last backed it up, restoring your backup should recover them.

I keep getting messages to sign into iCloud and sign in with my Apple Id. It happens on all my devices (MacBook Pro, iPhone 5 and Ipad mini. When I enter my password it will say password incorrect. I reset it through email it works for a day then repeats.

How do I rectify this situation, it is really frustrating having to reset my Apple id and icloud password every two days.

It sounds as if your account has been compromised. I would recommend logging into those accounts from your computer and their websites and changing your password.

Get the Pictures off my iPhone Photo Library

I got a new Macbook from insurance after a break in, My backup was stolen as well. I've got all my pictures in my camera roll Photo Library, the only problem is how to I get them off and back into iphoto on the new mac, i've tried with the jailbreak app iFile and count's get them. There are a few paid programs that say they can do it but surly i don't have to go and pay over $40 just to do this.
Please note the pictures were synced into events and what not. this isn't the camera roll stuff.
Any help
Thanks
Not_Sean

Photos transferred from your computer via the iTunes sync process is a one way transfer process only. Photos transferred from your computer are optimized for viewing on the iPhone as part of the process - the original resolution of these photos is reduced on the iPhone, which is why transferring these photos in the opposite direction is not supported.
I'm not aware of any 3rd party apps or utiltities that are free which provide for transferring this data in the opposite direction, and the original resolution of these photos will be lost in the process.

I keep getting an error message about importing photos

I am trying to import my photos from my Phone 4 becasue I need to separate them into albums too many are duplicated on my phone. It gets almost all of the way thorugh and it says, Error downloading photos and none were transfered

Hi,
I have had the exact same problem although I can not fix the issue my solution is to select less than 10 photos then click import selected it usually makes it through till the end. If not then I pull out my phone and repeat, I know it is time consuming however eventually I have been able to import all.
Sorry I don't have a more technical answer if you find one please let me know
Dane

Not getting any Pictures appear in my photo stream file

After updating to ios 7.06 in November I have never received any pictures on my PC (windows 7) taken by my iphone 4s.I have just today updated to 7.1 hoping this would help but it did not. I can find them on the iphone in photostream and camera roll with no problems but there they stay. If I share the photo manually I can receive it on my PC but this is laborious as I have to remember to do it each time. Everything else such as contacts emails diary etc is doing what it should and updates each other without a problem. I understand that I may have lost pictures taken prior to the update and that is not an issue. I am receiving nothing since.
I have tried the following;
turning icloud off and on for pictures after applying each change
resetting the phone
Deleting all photostream pictures (after copying them off directly)
Choosing a different file other than my photostream for them to download to.
If any one out there could help I will be eternally grateful. Thanks

Hi there nextgenchris,
You may find the troubleshooting steps in the article below helpful.
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
-Griff W.

Sony dpf-d810 how to get facebook pictures to load on photo frame. get ? photos.

How to change facebook stored photos to use on a sony s-frame dpf=d810. I only get a large question mark. Is there a program I can use to access my own phots stored only on facebook. My computer crashed and I dont have them stored anywhere else.

If a question mark is displayed in index view, the thumbnail data or image file itself may not be supported by the photo frame. If the images are in an unsupported format, then it may be required to convert the files to one of the supported file formats before using them in the photo frame. Refer to page 33 of the supplied operating manual for information regarding the compatible image file formats.
http://www.docs.sony.com/release/DPF-D700_D710_D720_D810_D820_D1010_D1020.pdf
If my post answers your question, please mark it as an "Accepted Solution.

Keep getting crashes becoming more frequent here's details ID: b3006511-732c-4169-999e-d7bf62110121 Signature: F_1339296399__________________

freqent crashes any help would be greatly appreciated

That is a problem with the [[Flash]] plugin.
See:
* http://kb.mozillazine.org/Firefox_crashes
* http://kb.mozillazine.org/Flash
* http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
You can try to disable all other plugins except Flash and also disable all extensions to test if that helps.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

[RESOLVED] Unable to move dev directory for Apache, keep getting 403

Hello,
I'd like to move my default /srv/http directory for my PHP pages to a different location (somewhere in my home directory) for convenience. This is exclusively for local development. However, after making the same change in two places, I restarted Apache and keep getting a 403 error.
Here is my httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 127.0.0.1:80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
# enable PHP.
LoadModule php5_module modules/libphp5.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/home/local_user/Documents/development/php"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/home/local_user/Documents/development/php">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
MIMEMagicFile conf/magic
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# enable the PHP5 module.
Include conf/extra/php5_module.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Last edited by publicus (2014-02-02 18:06:07)

WorMzy wrote:
Switch to the http user and see if you can manually browse to the directory.
# su -s /bin/bash - http
Find out where the user can't get to, and fix the permissions.
You're right. I can't get there.
I tried to make Apache start up as me (my user), but got an error that said that it cannot start it up like that. I think I have a possible solution for the given problem. I'll my user to the http group and then work from /srv/http.
I'd love to get some feedback if someone has a different approach . I love to learn from the experience of others .

Keep getting Error on iTunes, token for this user has expired

My sister keeps getting this on her iTunes, Something about AOL Account, It used to be my computer, I never had an AOL Account, just an Apple ID.
It crashes after the message, It askes for Username and password but the "Beach Ball" comes up and iTunes crashes!! I seen a thread like this on here, but can't find it, Any help would be great

Just to update this, I was able to connect with Adobe by phone and resolve the problem. The guy on the phone was much more helpful than my two previous attempts to contact Adobe by their online chat.
The guy had me repeat the steps outlined in Solution 3 in the document that Bill refers to, however we also did the additional step of running a program called Adobe Creative Cloud Cleaner tool. That program removed the files from my system that were preventing Photoshop from running.
Thanks all.

I keep getting: MobileDeviceService has encountered a problem and needs to close. We are sorry for the inconvenience."

I plug in my ipod to my computer, and I keep getting this. I've tried uninstalling itunes and re-installing it. I've gone to 'control panel-admin.tools-services-apple mobile device' tried stopping it, starting, restarting..all that. Nothings worked, and I keep getting the error message. Here's what the 'report says:
Error Signature:
szAppName : AppleMobileDeviceService.exe szAppVer : 17.66.0.47
szModName : kernel32.dll szModVer : 5.1.2600.5781 offset : 00012afb
Help, please!!!

i have the same problem... cpuld anyone help us resolve this kind of problem...

My sister keeps getting my pictures saved into her photo

Similar Messages

Maybe you are looking for