My sister pulled my ipod out while it was restoring now its frozen what should i do

it is on ios 6

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

Similar Messages

  • My ipod froze while i was restoring it

    my ipod froze while i was restoring it.. what should i do? or what's the best thing to do? Send it back?

    Try resetting it now...
    Resetting Your iPod
    What does the iPod show now when it is turned on?
    btabz

  • My sister changed her iPod password but it won't let her in, what should we do?

    She changed her password and she can definitely remember what she changed it to, but it won't let her in. It's been disabled for 60 minutes and we have no clue what to do when it's finally enabled. What can we do without disabling it even longer?

    Follow the instructions here:
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • Someone stole my ipod touch while i was at school no tracker what can i do?

    About a month ago my ipod touch was stolen. I have asked people on facebook and around school if they have seen it. I asked the front office if any one turned it in but they said no. What can ido to track it or something?

    All you can do is report it to the police.  Also, change the passwards for all accounts used on the iPod.  Apple will not help.

  • My Ipod Touch 4th Generation Crashes every now and again what should i do?

    I can be in an app and press the home button and then about 30 seconds later, the ipod actually quits the game. it also takes a while to lock... When i press the lock button, the screen goes black (as it should) but i end up waiting about 10 seconds before i hear the lock sound.... could somebody help me??

    - First try resetting the iPod. Nothing will be lost:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Next would be to restore from backup
    - Then, restore to factory defaults/new iPod
    - Last, make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem.

  • TS4006 my daughters lost her ipod somewhere while she was out, is there any way we can locate it?

    my daughters lost her ipod somewhere while she was out, can it be located?

    "find my iPhone" option must be activated on the iPod before loosing it.  If you haven't you are out of luck.  If you had, then either go to http://www.icloud.com or use the "Find my iPhone" apps from any other iOS device.
    The iPod will need to be connected to a wifi network in order to be located.

  • HT4623 i turned my ipod off while it was udating the software (oops) now all it shows on the screen is a picture of the cord with an arrow pointing up to itunes. please help.

    i turned my ipod off while it was udating the software (oops) now all it shows on the screen is a picture of the cord with an arrow pointing up to itunes. please help.

    What happens when your connect the iOS device to your computer and restore via iTunes.
    Try DFU mode and then restore if necessary.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software

  • Hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has

    hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me  ?

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • While itunes was restoring my ipad in recovery mode, I got an error message requesing a passcode.  What do I do now?

    While itunes was restoring my ipad in recovery mode, I got an error message requesing a passcode.  What do I do now?

    Hi Amandalee498,
    It sounds as if your Windows computer is not detecting the iPad in iTunes. Let's see if we can get that fixed up.
    I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • What do you do when you accidentally unplugged your Iphone4S while it was restoring from iTunes?

    I accidenlty unplugged my Iphone 4S while it was restoring and now it just has a apple sign poped up with a downloading bar below it.
    What should I do?! I tried plugging it back to itunes but its just frozen now. I know it was stupid to do that.
    Should I just wait for the battery to run out or something?

    A rental has a specific amount of time that it is rented for - I think 30 days. So you have 30 days to view. Once you start to view the movie you have 48 hours to watch it as many times as you want - after the 48 hour time limit the movie expires.
    MJ

  • I was pushed into a pool while I was holding my iPhone 5 what can I do?

    I was pushed into a pool while I was holding my iPhone 5 what can I do?

    There is a technique to dry the phone out, but by the time it dries out you would have your replacement phone anyway. Even so, the water damaged phone is likely never going to work 100% again.

  • I updated my ipod touch4 and it said i had to plug it up to itunes which i did then when i plugged it in it said i had to restore which i did and i was very upset and it restored it and now its frozen on the apple logo how do i fix it? ps button dont work

    I updated my ipod touch4 and it said i had to plug it up to itunes which i did then when i plugged it in it said i had to restore which i did and i was very upset and it restored it i guess and now its frozen on the apple logo how do i fix it? ps my ipod home button doesnt work.

    Try as much as you can. When it says to place in recovery mode use this program instead.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My ipod touch 4th gen will not turn on, i have held the power and home buttons, i have plugged my ipod into itunes and tried again, yet nothing happens, what should i do?

    My ipod touch 4th gen will not turn on, i have held the power and home buttons, i have plugged my ipod into itunes and tried again, yet nothing happens, what should i do?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My friend took my ipod touch and did the password now its disabled and wont connect to computer?

    my friend took my ipod touch and did the password now its disabled and wont connect to computer?

    Colton,
    You'll need to connect your iPod to your iTunes library in Recovery Mode and restore it using the instructions in this Apple support document.
    http://support.apple.com/kb/HT1808
    B-rock

  • I lost my ipod, when i track it it says its off. what do i do now?

    i lost my ipod, when i track it it says its off. what do i do now?

    What to do if your iOS device is lost or stolen
    http://support.apple.com/kb/HT5668

Maybe you are looking for

  • Display error message in OVS window

    HI, I am using the OVS component. Is it possible to display an error message in the OVS popup itself after the user has selected a value?

  • Brother Printer won't print unless you restart Mac in Mavericks

    I recently updated to Mavericks and got the new printer updates for my Epson 4880 and Brother MFC 7420. In Mavericks, it won't print unless you restart. This is very frustrating. System Preferences says that the printer isn't connected, when it is. I

  • Free Busy information not appearing correctly in Outlook

    First some background: For two of our Resource Mailboxes, we are having an issue where all times are showing outside of Work Hours (gray). The working hours for both of these rooms are set for 8-5, pst, just like all our other Resource Calendars. Thi

  • How to add titles to multiple pictures at same time in iphoto11

    I am having difficulty navigating in iphoto11. Can not figure out how to add keywords to multiple photos or how to add the same title to multiple photos.

  • DIAdem script

    Hi Forum, I am encountering a simple problem with DIAdem script: when automatically creating a report, I am not able to change the orientation of my report by script. Code is as follows: Call ReportMasterLoad("D:\Projects\bdrimmel\iTest\UniPlot\DIAde