My skype number is not getting calls on my android...

I bought a number but my skype account on my cell does not show it nor tell me how to load it.

Hello,
Skype Number enables you to receive calls on your Skype account and the caller will be charged local rates.
To receive calls to your Skype Number, you should be online on your Skype application, or you can enable call forwarding and voice messaging. And also, please make sure that you are signed in to only one device.
Please make sure that you have set up your Privacy Settings to "Received calls from anyone."
Sign in to Skype.
Tap the menu icon .
Select Settings.
Go to Receive calls from option.
If one of my replies has addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others experiencing the same issue.

Similar Messages

Skype number unreliable / not working?

I am using Skype on a Galaxy S3.
Ever since I signed up for a Skype number I have had people emailing me saying that they were unable to contact me on the Skype number that I gave them. This has become more frequent just recently and I have missed some important calls.
When I call my Skype number from a landline it's a bit hit and miss if a connection is made.... sometimes I get "number not recognised" response from the landline. People who have attempted to call me report similar isssue or sometimes that the number is continually busy and does not go to voicemail.
I called skype support yesterday via Live Chat and was talking to the support guy for 1h 20min and achieved nothing.... he blamed it on everything from my phone provider, internet provider, that my email account was overloaded etc etc ... I think the guy must have bored and was having a joke with me..... that or he was a complete and total utter ####### idiot.
I have attached a screen shot showing settings on my Skype account page.
Currently (23 Jan) my Skype number is not working at all... when I attempt to call from landline I
get the message "the numebr that you have dialled has not been recognised"
Anyone else having reliability issues with a Skype number? Unless I get the issue resolved I will be cancelling account as it is worthless to me in it's current working state.
One more question.... I managed it yesterday, but cannot find it tooday, but how **bleep** do you get to the link for Live Chat.... all i do is get directed to send email???
TX

Hi, Seismic99,
Please note the clause included in our Community Guidelines related to duplicate posting; duplicates have therefore been removed.
Please also see my colleague, NormanM, has posted, above, in response to your first post.
Here is a link to the instruction on how to contact Skype Customer Service:
https://support.skype.com/en/faq/FA10656/what-is-live-chat-support?
Skype is aware of lingering problems with the website when contacting their customer service agents. If you experience difficulty reaching Skype Customer Service or find yourself redirected back to the Community (or offered only the Community as a contact method), please try again using a different web browser and - important - choosing a different path through the various drop-down menu options presented.
Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in the browser settings, this will also block reaching an agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Serial number is not getting updated in GR

Problem: Serial number in not getting updated GR document (in stock) while going GR for production order.
We are using u201CBAPI_GOODSMVT_CREATEu201D to do production order GR in one development. And we have used serial number profile in which we kept GR as optional. Please fine details of serial number profile as below. We have a restriction that we can not make GR mandatory in serial number profile.
MMSL     Maintain goods receipt and issue doc.     02     02
PPAU     Serial numbers in PP order     02     01
PPRL     PP order release     04     01
PPSF     Serial nos in repetitive manufacturing     03     01
QMSL     Maintain inspection lot     02     01
SDAU     Serial numbers in SD order     01     01
SDCC     Completness check for delivery     02     01
SDCR     Completion check IR delivery     02     01
SDLS     Maintain delivery     02     01
SDRE     Maintain returns delivery     02     02
As we are passing serial number in BAPI while doing GR but still is not getting updated in GR document. When we check stock in MMBE, it is not showing any serial number.
Please suggest solution.
Thank you.

Hi Chetan,
Since your MMSL procedure is optional, you cannot carry assignment of Serial Numbers against goods Movement. Though you are passing serial numbers during GR, but Serial Numbers are linked only upto Production Order Level, not upto the Stock. The only option to display the Serial numbers against Stock can be done using MMSL procedure as 3. We also faced the similer situation, whenever ur doing automatic goods movement with MMSL as 02 [Auto GR], One possible solution, is to create a custom program to complete ur GR like using Call Transaction BDC -MB32, not as standard SAP Auto GR, & need to make MMSL as 3...so that both purpose gets served [ Serial number linking to stock & Automatic GR using custom program]
Please share, if you get any better idea
Krishna Kulkarni

My Skype number is not the number presented when m...

My Skype number is not the number presented when making outbound calls. My subscription had expired but I renewed a day later. My account shows that my Skype number is still active. What do i need to do?

Hi, Atiya85, and welcome to the Community, Please first check if the instruction in this FAQ article does not resolve this problem:https://support.skype.com/en/faq/FA10615/why-am-i-not-receiving-calls-to-my-skype-number Otherwise, please contact Skype Customer Service for further assistance in diagnosing and rectifying the issue. We here in the Community do not have the tools to do this. Regards,Elaine

My skype number is not active

my skype number is not active this is my number [redacted for privacy]i call this number but is busy not riningi hope to check this problem thanks u

Hi, Atiya85, and welcome to the Community, Please first check if the instruction in this FAQ article does not resolve this problem:https://support.skype.com/en/faq/FA10615/why-am-i-not-receiving-calls-to-my-skype-number Otherwise, please contact Skype Customer Service for further assistance in diagnosing and rectifying the issue. We here in the Community do not have the tools to do this. Regards,Elaine

My Skype number is not ringing

My skype number is not ringing or answering when it called
it worked great for a few weeks

We need more information. Do you have a subscription that covers mobiles such as a US subscription? If not you will need skype credit to forward to your mobile. Have you set your privacy settings to allow anyone to call. Like this.
First check that your privacy settings are set to ''Allow calls from anyone''.
Then change them to "Allow SkypeIn calls from Only people from my Contacts List".
Save and wait for 5 minutes.
Log out from your Skype account and log back in.
Change settings back to "Allow calls from Anyone".
Save and wait for 5 minutes.
Log out from your Skype account and log back in.
I hope this sloves the problem.
If you found a post useful, please give Kudos. If it helped to fix your issue, mark it as a solution to help others.
Thank You!

I want my money back please my skype number is not...

i want my money back please my skype number is not working my card number is [***] thank you . you can call me on [***]
Personally identifiable information redacted.

There are no refunds. Sorry.
You are not addressing Apple here at all.
We are all itunes users just like you.

Getter & Setter Method not getting called for a field enhanced through AET

Hello,
I am new to SAP CRM 7.0 and working on a requirement.
A Z-field was added by our functional guy in CRM 7.0 WebGui through AET in the 'Create Opportunity' transaction (Header data).
Now the requirement is, as soon as the opportunity is created through the WebGui, I should post a document in R/3 and paste that document number back to the enhanced Z-field in opportunity.
Work done by me:
I pressed F2 on the enhanced Z-field in the WebGui screen and took the details of view, component name etc. After this I went to normal SAP CRM system and open tcode "BSP_WD_CMPWB", located the corresponding view "BT111H_OPPT/Details" and right clicked & enhanced the same.
Then I opened the structure of this view, expanded context node, located context "BTOPPORTH" and inside this, located my Z-attribute. Now right clicked on the Z-attribute & selected the option "Generate SETTER & GETTER Methods" and these were generated successfully.
Problem:
The problem is even after putting external break points in these methods, these methods are not getting called while creating, modifying & displaying the Opportunity in WebGui.
I hope that for the requirements that I have, I have to do the coding in "Getter & Setter" methods. But since these are not getting called, I am unable to proceed.
Please help/suggest how to achieve this.
Thanks in anticipation.
Best Regards,
Rahul Malani

Hi,
If you can see the field in UI and still get_ method is not being triggered then try to regenerate these methods. If it still doesn't work then please look for SAP notes or raise an OSS.
There should be some note for the issue you faced.
please refer:
Help Needed immediately - AET getter setter methods not getting triggered
Regards,
BJ

Skype number still not working

I am have been subscribing to a Skype number, but when I call it an automated female voice answers the number despite that I have been trying to reset it by switching Skype privacy settings. When I call from Skype to my phone a caller id number that I don't know shows on my phone.

baumana wrote:
The order number for my skype number is still listed as pending,
Hello
Our payment unit has not processed your Skype Number order placed on July 1st 2014.
please contact Skype customer service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Material Number and Serial Number are not getting filled...Very very urgent

I have my code in the badi...CRM_EQUI_LOAD...method PERFORM_LOAD.In this i try to to create a component for the ibase using the function module... CRM_ICSS_CREATE_COMPONENT...The component gets created but the material and serial number are not getting updated...It is very very urgent..please help....

I am not sure what information you are passing in given FM.
But in my case I have used FM 'CRM_CREATE_IBASE_FROM_EQUI' to create Ibase and component. It creates IBase and Component along with other details like material number and serial number.
you may refer the below code for the same >
Call the standard handling for crm equi load.
call function 'CRM_CREATE_IBASE_FROM_EQUI'
    exporting
      is_header         = is_header
      it_equi_dmbdoc    = it_equi_dmbdoc
    changing
      et_error_segments = ct_error_segment
    exceptions
      technical_error   = 1
      others            = 2.
if sy-subrc <> 0.
    raise equi_load_badi_error.
endif.
Cheers,
Ashish

If i have a US Skype number, can I be called in ca...

if i have a US Skype number, can I be called in canada and elsewhere?

Yes: http://www.skype.com/intl/en-us/features/allfeatures/online-number
"The number that reaches you – wherever you are"
"An Online Number (also called Skype number) is a number anyone can call you on from their mobile or landline - and you answer on Skype, no matter where you are. And with every Online Number you also get voicemail included. Then when family and friends call your Online Number and you're unavailable, they simply leave a message which you can listen to the next time you sign in to Skype."
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

PERFORM Statement is not getting called

PERFORM Statement is not getting called in Z-copy of standard SAP script F110_PRENUM_CHCK.
On debugging the code i am not getting any value in all changing parameters.
and when debugger cursor comes to PERFORM statement then on Pressing F5 it goes to next line and ultimate result is
that i don't get any value in generated form.
I had used follwing perform in my script ZF110_PRENUM_CHC which is copy of F110_PRENUM_CHCK.
DEFINE &ZDOCNUM& = &SPACE&
DEFINE &ZDOCNUM2& = &SPACE&
DEFINE &ZAMOUNT_BSAK& = &SPACE&
DEFINE &ZAMOUNT_BSIK& = &SPACE&
DEFINE &ZVNDR_INVREF_BSAK& = &SPACE&
DEFINE &ZVNDR_INVREF_BSAK& = &SPACE&
PERFORM ZFI_PRENUM_GSF IN PROGRAM ZFI_PRENUM
USING &REGUH-VBLNR&
USING &REGUH-RBETR&
USING &REGUP-SKFBT&
USING &REGUD-WRBTR&
USING &LFA1-LIFNR&
CHANGING &ZDOCNUM&
CHANGING &ZDOCNUM2&
CHANGING &ZAMOUNT_BSAK&
CHANGING &ZAMOUNT_BSIK&
CHANGING &ZVNDR_INVREF_BSAK&
CHANGING &ZVNDR_INVREF_BSIK&
ENDPERFORM.
PROTECT
&ULINE&
DOCUMENT NUMBER AMOUNT(RS.) VENDOR INVOICE REFERENCE DEDUCTIONS
&ZDOCNUM& &ZAMOUNT_BSAK& &ZVNDR_INVREF_BSAK& &ZDED_AMT&
&ULINE&
Edited by: Ajay84 on Nov 24, 2011 2:32 PM

Hi,
when you are using SAP SCRIPT debugger, on perform statement it doesn't go to the FORM in the program.
The reason is the FORM should be debugged in ABAP debugger.
So put a break point in the FORM which you want to debug and then execute the transaction. That will take you to the form in you r program.
Hope this helps..
Regards,
-Sandeep

Server side function not get called after dispatching cairngorm event second time on same page

Hi All,
I am facing a urgent issue regarding cairngorm event. Actually my page contain 3 button add,delete,save
and clicking of any button I do the respected functionality. For ex:
I click the add button & on clicking of add button I fire a cairngorm evnt & after getting response from server side that the record is added
I displayed a message that the record is added & update the data source.
After addition of the record , with out going to other page if I perform the same functionaly(Like adding another record) on same page the cairngorm
event not call the server side function - after debugging I find out that cairngorm event reach to the corresponding excutecommand function & called that function but it is not calling my server side function & I also din't get any error message .
I dont know why the server side function not get called?. similarly if I try for delete or update case the same things happend. Only for the first time it works properly but not for the second time.
Could any of you please tell me why the cairngorm event not calling the server side function.
Thank you for your kind assistance.
Regards,
Ujjwal

Okay, well I think I've worked out the problem.
In ASP.NET we would typically bind repeating controls such as DataLists and Repeaters manually using <i>Control</i>.DataBind(), because we're usually using a separate class library containing collections for our objects. Seems the SAP Table control doesn't like this approach.
I changed the code so that the databinding is specified on the control, and call the Page's DataBind() method and it all worked fine.
One tip: because the collection I used to bind to is in a separate class library, I receieved a <i>BC306523: Reference required to assembly MyAssemblyName...</i> message, even though I had a reference to the assembly in my project and the DLL is being properly deployed. To fix this, you must include the following directive at the top of the component's ASCX file:
<%@ Assembly Name="AssemblyName" %>

ReturnEvent not get called after search more than 10 times in LOV page

hi there,
I using ADF and Jdeveloper 10.3.1.2
In my project I have a form which called a LOV page for selecting multiple records and submit button sumup the values of each selected row of LOV and return to the main form and display added value on text field.
problem is when I search records more than 10 times or more I put search criteria and select row on each time. After click on submit the value of each row is sum up return on the main form but it not reflected on main form because ReturnListener not get called .
But when I select many rows more than 10 without searching then the ReturnListener get called when it returning on main form.
So should I do so that ReturnListener get called.
Is it any bug of ADF or Jedeveloper .

Hi,
depends on whether you control the BPM task flow or not. If you do, have a look at this thread for how to debug the problem
How to debug "Attempt to validate an already invalid RegionSite"?
Otherwise, post it to the SOA forum if this is initiated by their generated code. The most common reason though is that the task flow lacks a default activity. So if the default activity is somewhat calculated dynamically in your application then this may be a reason
Frank

Bookmark method for a page is not getting called

Hi,
I am developing a simple ADF application which contains two jspx pages, in JDEVELOPER 11g (build JDEVADF_MAIN_GENERIC_080910.1420.5124).
I have a commandLink in Page1 which takes me to the Page2.I have a bookmark method for Page2, which gets called when I load the page.
When I access the Page2 directly,the corresponding bookmark method is getting called.But when I navigates it through commandLink provided in Page1,the bookmark method is not getting called.
Page1.jspx:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document maximized="true">
<af:form>
<af:commandLink text="Go to Page2" action="page2" />
</af:form>
</af:document>
</f:view>
</jsp:root>
Page2.jspx:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:bib="http://xmlns.oracle.com/dss/adf/faces">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document maximized="true">
<af:form>
<af:outputText value="This is Page2"/>
</af:form>
</af:document>
</f:view>
</jsp:root>
adfc-config.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<view id="page1">
<page>/page1.jspx</page>
</view>
<view id="page2">
<page>/page2.jspx</page>
<bookmark>
<method>#{mBean.bookMarkMethod}</method>
</bookmark>
</view>
<control-flow-rule>
<from-activity-id>page1</from-activity-id>
<control-flow-case>
<from-outcome>page2</from-outcome>
<to-activity-id>page2</to-activity-id>
</control-flow-case>
</control-flow-rule>
<managed-bean>
<managed-bean-name>mBean</managed-bean-name>
<managed-bean-class>view.ManagedBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</adfc-config>
ManagedBean.java:
public class ManagedBean {
public ManagedBean() {
super();
public void bookMarkMethod() {
System.out.println("Inside bookmark method");
Please look into this...........

Hi Frank,
I need to provide the af:commandLink inside af:table component and the values which I pass to page2 depends on the row I select at runtime.
so,I am trying to use ad:setActionListener inside af:commandLink.
If I use FacesContext.getCurrentInstance.getExternalContext.redirect() inside the actionListener of af:commandLink, I need to extract all the required values in the actionListener.
Isn't there any way so that, I can pass the values using af:setActionListener inside af:commandLink and a method ( which will initialise the managed bean) will be called when page2 loads ???
Regards,
Lokesh.

My skype number is not getting calls on my android...

Similar Messages

Maybe you are looking for