My SLD is configured in SOLMAN sys, How can I connect it with SAP PI system

Dear Friends
My Basis has configured SLD in Solman, Now I cant use SXMB_IFR tcode in my PI that suggest me some error. saying "error in connection cant read secure connection config" or something like that. Plus SLDCHECK tcode is also not happy. it suggest that RFC connections are missing.
It is clear that My SLD is not linked with PI system. something is missing in technical system part and its not even bridged. but since I am not a BASIS guy I dont know How can I configure it. Not even my BASIS guy understands that I need to bring SOLMAN SLD to PI.
Can anyone suggests me How can I bring my SOLMAN SLD to PI system so I can run SXMB_IFR tcode ? I need to create some rfc connection like LCRSAPRFC and SAPSLDAPI but dont know the connection type like t, or something else. Please englight me by suggesting How can I bring my SOLMAN SLD to PI.
One intresting observation is when I try to run my SLD over url using PI system as host it comes but says SLD is not configured properly and when I did the same practice with SOLMAN host it works fine and I didnt receive any error.
Please reply me. your any help will be appreciated greatly.
Regards
Naeem

Hi,
Preferebly PI should have it's own SLD. And SOLMAN could use PI's SLD.
Please check Installation guide and SLD Administration Guide from Service Market place before finalizing SLD architecture in your System landscape.
I guess SOLMAN will have only one Instance in system landscape. (Not three system landscape like Dev, Qa, Prod).
If you want to go ahead with your current SLD plan, then Change your SLD hostname in Exchange Profile of PI, to SOLMAN Host name.
Regards
Praveen K
Edited by: Praveen Kurni on Jul 7, 2011 6:12 PM

Similar Messages

How can i connect labview with ge fanuc versamax plc via VISA

I, ve a ge fanuc versamax plc. I am building a data logger in labview. There are two current trasmitters. I dont have any other data acquisition devices other than PLC. How can i access data acquired by PLC and how can i connect it with labview using VISA?

KPAC wrote:
I've a ge fanuc versamax plc. I am building a data logger in labview. There are two current trasmitters. I dont have any other data acquisition devices other than PLC. How can i access data acquired by PLC and how can i connect it with labview using VISA?
There may be variations between models, but I believe all VersaMax support Modbus and GE's own SNP/SNPX serial communication protocols.
For Modbus communication protocol:
The link here is a good outline of the different options available. If you really want to limit yourself to the option of using VISA, then it's Items 1. and 2. in Khalid's list that are applicable. You might have to modify some of the free LabVIEW Modbus VIs to suit you needs, but they are useful as examples if you have little experience programming a serial driver.
For SNP/SNPX:
Your options are similar to those for Modbus, except that I'm not aware of any existing free set of LabVIEW VI's for it. With a web search you might find something (I almost programmed one 10 years ago). The SNP/SNPX protocol is/was well documented in a GE FANUC manual which you could get from them (in 1993 it was GFK-052B "Series 90 PLC Serial Communications User's Manual") so you still can write your own set of VIs.
If you don't really need to limit yourself to using VISA, there are ActiveX and OPC drivers available which use SNP/SNPX that you can find with a web search. And you can see here that NI's Industrial Automation OPC Server's do include an object for GE Fanuc Versamax via Ethernet. This would not be the cheapest in terms of capital cost though.
Good luck.
=====================================================
Fading out. " ... J. Arthur Rank on gong."

I have an iPod tuch 2g. How can I connect it with ITunes

I have an Ipod tuch 2 g How cn i connect it with ITunes

Install iTunes on comuter and connect the iPod to your computer via the USB cable
If iTunes does not see the iPod:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

What is ARIS Tool? &How can we use it with SAP MM module implementaion?

Dear Friends /Consultants /Seniors of the SAP forum,
1.What is ARIS Tool?
2.What is the purpose (actual need) of this tool? And is it useful to SAP MM
Consultant during the SAP Implementation? or support? or rollout? or upgrade?
3.For which Business Process SAP Implementation, this Tool (ARIS) can be implemented? ( I mean for which industry sector this tool can be implemented or used)
4.Pls explain any business Senario using this ARIS Tool for SAP MM module implementation...
5.Is this a thirdparty tool, or who's product it is?
6.Being a SAP MM Functional Consultant, how can we utilize it during the SAP MM Implementation.
Pls do the needful,
Regards,
Srinvias.K
Message was edited by:
        sapsrin

ARIS - stands for ARchitectur Integrated Systems.
This is proprietary tool fof IDS Sheer AG,
In layman's words we can say its a tool create Flow charts.
In business we don't say these as flow charts but as EPC chains.
EVENT PROCESS CHAIN
This is a Designing tool of any kind of activity,from 4.6b ( i guess) SAP has Plug in to ARIS tool even.
For eg: If i wanna go and buy Sandwich,eat and come back to home.
its vey simple to say but if you map this in EPC.. there are lot of things come in picture.
steps
1) I get up from desk
2) Walk out of thehouse
3) Start my car
4) drive my car to XX place
5) I buy sandwich
6) Should i eat or carry out
if eat - pay for it
     look for vacant seat
     eat sandwich
      get out towards car
      drive back to home
If Carry out
Pay for it
get out towards car
drive back to home
Eat sandwich...
it still depends on how micro level control you need .
for eg: in the above process we can also include
1) pick up my car key
2) Wear shoes etc etc....
Basic aim of this tool we donot miss any event ,and to have standard predefined process flow.
If some one has better answer, please let me know.
Satheesh

How can widget be used with SAP EP?

hi,
If any one can tell me how we can use widget with SAP EP and the related scenarios.The steps to do so and the docs to refer to
thanks

these are desktop tools, check the link given in your another thread to understand more abou it.
Raja

How can i download Facebook with lion os system?

/Hello, I have a 2007 Macbook and I.m trying to download the facebook app and the app store can't seem to find it. How can i update my app store to perhaps locate it

There is no FaceBook app for Mac. There may be some 3rd party FB apps. You usually access FB with a web browser.

How can I connect LabView with a PLC S7-300?

I want to use LabView with a PLC S7-300. I think I can use a PC card or RS 232 with a HMI interface.What is the difference? I think I need an OPC server (I don´t know who sell it, National Instruments or Siemens) and I don´t know if I need anything else than LabView6i.
Thank you.

Alicia,
Ben's answer is absolutely correct. "Profibus" is the key word here, and a search of "profibus" from ni.com will provide quite a bit of information. I went ahead and pulled out the main items below. Follow the link below for product catalog info on the plug-in cards and interface software (the OPC Server) required.
http://sine.ni.com/apps/we/nioc.vp?lang=US&pc=bymn&cid=1315
For a step-by-step configuration tutorial, please follow this link:
http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&BA7CB7B0FFBEA12286256A32005B2BEA&cat=103057DD6D5AE678862568630016C98C
And finally, for examples on how to communicate with this OPC Server, or any other OPC Server for that matter, LabVIEW has some shipping examples. From LabVIEW, goto "Help >
> Communication >> Datasocket OPC". A good one here is the "Demo OPC Client" program, which uses a software OPC Demo Server that installs with LabVIEW. You could pull that open and work with the LabVIEW programming now before you even have the hardware.
Regards,
Greg Caesar
National Instruments,
Applications Engineer

How can I connect Internet with my 10.4 PowerBook

How to connect my own Internet connection to my new PowerBook 10.4.8

Firstly update to 10.4.11 via Software Update, or download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac or vice versa!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
Then connect via ethernet to your router.

How can you connect Ipod to a linux system?

Bought our study abroad student an Eee PC computer that will work well in his home country of Africa. My boys got Ipods for Christmas and I gave him one too. We are unable to find a way to get it to connect to his linux system. Is is possible?? It is an Ipod Nano 4th generation. Thanks!

The iPod is designed to work with iTunes however is no version of iTunes for Linux so there's no simple answer to your question. You'd be much more likely to find a possible solution by posting in one of the many Linux discussion websites. Linux Questions would be a good place to start, you'll find the forum at this link: LinuxQuestions.org

How can I connect PS3 with my iMac?

I am using a 21 inches iMac all in one pc.... and i found out that i could connect it with the ps3... but I have no idea which adapter do i have to use and where i can get one....? If someone knows abt it, pls do share the information with me as soon as possible thanks...

https://discussions.apple.com/thread/3578774?tstart=0
xbox, pc, blueray player, ps3
hdmi is hdmi and it all works the same way

How can java application integrate with SAP

i need some help regarding.
Actually we need a application which should work as standalone also which will be as java application
and as well as mostly we are preferring that this application should be integrated with SAP system also.
so please help me...
Edited by: anant waghmare on Apr 22, 2008 10:45 AM

If they are on seperate systems (ABAP & JAVA) you need to create a JCO connection

How can i connect imac with macbookpro

I started the imac at the store so that i didn't connect my macbookpro with it. I need to get some of my files and softwares from my laptop to my iMac. Is there any way that I can connect them without any cable.

https://discussions.apple.com/thread/3578774?tstart=0
xbox, pc, blueray player, ps3
hdmi is hdmi and it all works the same way

How can I connect iCloud with iCal (Snow Leopard)?

Hey
I'm using an iPhone 4 and want to sync my Calendar with iCal on my Mac (Snow Leopard) ? Is there any opportunity or it just possible for Lion?
Please help me

helplessdude wrote:
Hey
I'm using an iPhone 4 and want to sync my Calendar with iCal on my Mac (Snow Leopard) ? Is there any opportunity or it just possible for Lion?
Please help me
There are some hacks to using iCloud with Snow Leopard. One of the keys is you must use iCloud as your primary source for Contacts and Calendars. That is, when you want to make additions or changes to either your calendar or contacts you really MUST do it from the web interface to iCloud. Otherwise you may wind up with duplicates.
See the article here: http://bit.ly/LvVCR2

How can i update firefox with my operating system mac oxs 10.4.11

I don't want to update my operating system on my desk top, Firefox messge says I am no longer protected with current version of firefox but the new one isn't compatible with my system. Is there a way round this?

see here go to 3.6.24 :
https://support.mozilla.com/en-US/questions/895321
thank you

I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

try
http://support.apple.com/kb/ht2589

My SLD is configured in SOLMAN sys, How can I connect it with SAP PI system

Similar Messages

Maybe you are looking for