My smart guides are not working in Illustrator CC

I've check my settings, view, everything. I cannot seem to get smart guides to work. ( and yes, I've made sure I haven't just pressed command U )

J.Beech,
I don't know how but I've fixed it.
That is a pity. It is an old well known issue, or was until you came along, or rather still is because you cannot tell how.

Similar Messages

  • Smart Guides Do Not Work

    My smart guides do not work. From the time I loaded CS5 they have not worked. If you go to View > Grids & Guides > the Smart Guides are grayed out.
    Then if you go to the Control Panel > View Options, the smart Guides are not grayed out they are checked.
    I have looked around and read trying to find out whats up with these guides but have not found anything the works. I have also uninstalled InDesign and reinstalled. This stall did not work.
    If anyone has any idea of why or how to get the guides to work that would be great.
      Thanks for your help...
                                   HHud

    You must have Snap to Document Grid enabled.
    Why is [Some Feature] Grayed Out in InDesign?

  • Smart Guides Randomly Not Working

    Hi,
    I've noticed in Illustrator CS4 (with all the updates) that Smart Guides does not seem to work on some files.
    I make a new file in CS4 and then they automatically seem to work.
    I have tried re-saving the file and turning on and off the Smart Guide settings and playing with the Control button.
    I attached a sample file where it's not working as a demo.
    Any help would be greatly appreciated.
    Thanks.
    J

    They work just turn off snap to grid or snap to pixel.

  • Some fonts are not working in Illustrator

    Hello!
    I am having trouble with a font I wont to use in illustrator. I have already installed it in the system and it comes up in Flash but it doesn´t appear in illustrator or Photoshop. Can anybody help me? Thank you for your help in advance.

    >It shows in Explorer with an Open Type icon even though it's a True Type font (mtcorsva.ttf) from 1998.
    A couple of pertinent Wikipedia entries:
    http://en.wikipedia.org/wiki/TrueType
    http://en.wikipedia.org/wiki/OpenType
    Bottom line: Many Microsoft/Monotype fonts introduced after 1994 were sold/listed as TrueType fonts but, in fact, used 'TrueType Open' technology. Those will show up as OpenType fonts in the newest Windows operating systems.
    Install
    Microsoft's Font Properties extension
    to see more detailed information about your fonts via right-click/properties.

  • Why are my Red Line Edge Smart Guide indicators not showing up or continuing the image to the edge o

    I have been messing with a single long page layout with scrolling effects. So I have 2 or 3 other objects behind another object pair that I have been trying over and over to get to extend to the edge of the browser by pulling the size anchor of the rectangle object that has a raster fill up to the point where the Red Line Smart Guide line shows up indicating the image will repeat and fill out to the edge of the browser.
    The red line seems to only show up for a millisecond will pulling the transform horizontal anchor. Then it snaps past the edge point by 20 pixels. Even when I have "caught" the redline for that millisecond and release the transform anchor, it still doesn't work when previewing or previewing in browser.
    Does the object that you want to have repeat to the edge of the browser have to be one object?   I have tried experiments with more rectangles with just color fills as well and it's the same sporadic Redline.

    In your Muse preferences make sure that your smart guides are turned on:

  • Snap to? Smart Guides? Not sure what the issue is but it's annoying.

    Just made the big step up from CS2 to CS5. Lots of changes as to be expected but otherwise a smooth transition. Nice work Adobe.
    One recurring issue has got me baffled and annoyed. It appears to be a snap-to function yet I'm unable to locate the place where it might be disabled.
    In my previous version of InDesign resizing window sizes and shapes was a fluid and easy motion. Now it's staggering and akward. The text and picture boxes want to snap on an unseen grid. I understand how this can be a useful function for some kinds of work but it also gets in the way of composing an image.
    Any suggestions on how to disable this?
    Presently, I have both Smart Guides and Snap to Document Grid UNCHECKED in the View menu yet I'm remain unable to smoothly and fluidly size my text and picture boxes.
    Thanks!

    There's another new feature, Live Screen Drawing, that's on by default, but for many users it causes real choppiness in moving around on screen. It's at the bottom of the Interface section of the preferences. Try setting it to Delayed. That will allow you to have a live preview when you really want it by clicking, then holding for a moment before you drag, but moving immediately will give you what you are used to in CS2.
    I actually think Smart Guides are worth using. They save me a TON of time.

  • My smart cover is not working on my new iPod 3 ( wifi 4g ) even the smart cover option is not in my setting menu but mIn my wife device it is working good would help me

    My smart cover is not working on my new iPod 3 ( wifi 4g ) even the smart cover option is not in my setting menu but mIn my wife device it is working good would help me

    The setting for iPad cover lock/unlock is in settings > general for iPad 2.
    The iPad 2 and new iPad if both are using iOS 5.x or later the setting exist in settings > general.
    So, if you worked at an apple store I think you should have known that the setting exist.
    You are right, a hard reset (force restart) should only be used if iOS device is unresponsive or apps crashing...etc.
    But, a simple restart helps as well.

  • N8 on NOKIA Belle - Audio songs are not working an...

    I installed Nokia Belle yesterday, but all my songs (Downloaded from OVI Music) are not working anymore. Its saying either the licence is expired or missing. Can anyone please help me out ?
    Regards,
    Vishal Soni
    Solved!
    Go to Solution.

    Hi,
    I noticed from FAQs the following tip:
    If you have this problem after software update, format memory card in your device. Refer to your device user guide for instructions. Following this your music need to be resynchronised from your PC back to your device using the Nokia Music Player -application.
    I guess you could just remove the non-working music files from the device and re-download those from Nokia Music Player your account/purchased music section. Maybe it would be best to try this first with just one song :-)
    BR; Alvin

  • The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem.

    The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Some smart album rules not working

    At a bit of a loss here - either my upgrade to Mavericks or my upgrade of Aperture to 3.5 has caused my Smart Albums to not work with various EXIF checking rules.
    I frequently have rules which check the EXIF tag, Camera Make, and check if it is Canon - this allows me to filter out and focus on my Canon 5D3 photos and not get distracted in relatively pointless editing of iPhone snaps. Unfortunately it doesn't work. Camera Make is Canon returns no matches, Camera Make starts with Canon returns nothing, Camera Make ends with Canon returns nothing.
    If I go and look at a photo, I can see the Camera Make exif flag says "Canon" in the field. No spaces at the end or anything silly. It used to work.
    Anyone experienced similar? Anyone have solutions?

    Hmm, interesting. Given your use of quotes I just tried "Canon" including the double quotes, but that made no difference either.
    The EXIF filter is the only rule on the smart album, and while the smart album is set for a single project, there are several hundred photos that should match in it. If I set the smart album to "Library" rather than the project, it still matches none...! Just in case there's some other rule burried away that just isn't displayed, I switched the smart album to "Match Any" rather than "All", and that too returns no photos.

  • Drivers are not working even after reinstalli​ng in Hp 2000 series windows 8.1

    Suddenly my audio drivers is disabled. It shows error to re install drivers , i did but still its not working... I have Hp 2000 series laptop windows 8.1    Kindly help

    Hello @Noman2006,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the audio drivers are not working on your notebook computer, and I would be happy to assist you in this matter!
    To return the audio output to working order, i recommend re-installing the original software and hardware drivers on Using Recovery Manager to Restore Software and Drivers (Windows 8). To update these drivers, please follow this resource on Using HP Support Assistant (Windows 8).
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Mbp numerical keys are not working

    my macbook pro was using last one year now the numerical keys are not working find a solution

    It sounds like what I have seen multiple times on a device with moisture damage.
    Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out.
    It really is more common than you think.
    1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
    2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
    3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
    3. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
    *Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
    Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
    On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
    On the dashboard of your car on a sunny day
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • File and keyboard commands not working in Illustrator CC.

    I'm having massive problems with Illustrator CC. The open and paste commands work once or twice and then nothing. Unless I quick the program, they will not work. I have tried everything. I took the drastic step today and erased the hard disk and loaded EVERYTHING again. And I mean everything. I even tested Illustrator without activating the fonts to see if it was a font conflict. Nothing. I'm done. I have tried everything. Has anyone else had this problem? I need help…

    Hi Nicholas Petropoulos,
    I am sorry but even i am running out of options now.
    Try these.
    Make sure you do not have any browser open when you use Illustrator.
    If you are using a magic mouse or Wireless Keyboard.
    Try disconnecting them and check the performance.
    Also when the issue happens, do you have to force close the application to make it work again?
    The mouse and other options do not work on Illustrator. Are you able to use the mouse any where else on the machine when the issue happens ?
    Regards,
    Nikhil Gupta.

  • MY BB SERVICES ARE NOT WORKING

    PLEASE MY GOOD BROTHERS  AND SISTERS KINDLY COME TO MY AID IN  HELPING ME RETIRIEVE THIS  PROBLEM ....................... MY  BLACKBERRY SERVICES THUS THE BBM ,APP WORLD ,FACEBOOK  ,ARE NOT WORKING AT ALL.
    COSMOS

    DONCOSMOS wrote:
    THANK YOU VERY MUCH FOR THE QUICK RESPONSE, WELL I HAVE  NEVER  ENJOYED THE SERVICE  ON MY PHONE AND YES I HAVE VISITED MY SERVICE  PROVIDER TO LODGE A COMPLAIN AND YES  I WAS SUBSCRIBED  A SERVICE  PLAN DATA CALLED SOCIAL PLAN WHICH IS SUPPOSE TO WORK ................ BUT STILL  I HAVE BEEN CHARGED  ALWAYS AND YET MY SERVICES WONT WORK .
    cosmos
    Why do I lodge a complaint about your ALL CAPS typing?
    Hard to read, hard to help you find a solution if I can't easily read your posts.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • CURVE 8520 - KEYS ARE NOT WORKING

    Need assistance to guide as the qwerty pad, navigation and other keys are not working. when conncting the phone to laptop, the alarm confirmation appears and cannot cancel or open other file.
    already restart the phone and removed the memory card but still problem occurs.
    Solved!
    Go to Solution.

    Perfom a back up from your device information , the make an update if your device dont have any update make a force detection or just a reset of factory settings if the error continues you need a warranty replacement.
    Back up steps:
    For a backup of the data on a BlackBerry smartphone, complete the following steps:  
        Click on Device from the upper left-hand corner of the BlackBerry Desktop Software and select Back up from the drop-down list, or simply click Back Up Now from the main screen of the BlackBerry Desktop Software.
        Mark the appropriate customization level ( Full, Quick, Custom).
        If your smartphone includes built-in media storage and you want to back up data that is stored there, select the  Files saved on my built-in media storage check box.
        Input a file name if desired, or leave the default text.
        Leave the  Encrypt backup file unchecked.
        Select Back up.
    Update steps:
        Connect the smartphone to the computer.
        On the home screen of the BlackBerry Desktop Software, click Update.
            To download an update, click Get update.
            To view other available versions of the BlackBerry Device Software, click View other versions. If applicable, click another version. Click Install.
        Do any of the following:
            To keep a backup file of your smartphone data and settings, select the Back up your device data checkbox. This backup file is restored to the smartphone after the update is complete. If the data is not backed up, the smartphone data, settings, and email messages are deleted from the smartphone after the update is installed.
            To encrypt the backup data, click Encrypt backup file.
            Select the Keep me subscribed to email notifications checkbox to receive email updates when new versions of the BlackBerry Device Software become available.
        Click Install update.
    When the confirmation message that the update is complete is displayed, the BlackBerry smartphone may be disconnected.
    Force Detection :
    Remove the battery from the back of the BlackBerry smartphone.
    Connect the BlackBerry smartphone to the computer using a USB cable.
    Once prompted to Retry, Update or Cancel, click Update. If available updates are found Desktop Manager will prompt you to Get Update, Update Later or View other versions
    Click Get Update to install the recommended software version or View other Versions to manually select the version you wish to install and click Install.
    In the Update Options screen there is the option to enter the email address to be notified in future when there may be new software versions available.
        fill in the checkbox and enter the email address in the text field to receive email notifications
        uncheck the checkbox and leave the text field blank to not receive updates.
    Reinsert the Battery which was removed in step 1
    Click Install Update
    Reset Factory Settings steps:
        In the top right corner of the BlackBerry Desktop Software, click on the ? in the top right hand corner of the BlackBerry Desktop Software.
        Click Support Resources
        Then Support Tools
        Click the Reset button under the heading Reset to Factory Settings.
    Any question let me know.!

Maybe you are looking for