My solution to the connection problem

First I will tell the solution and then I will state my thoughts about the source of the problem.
SOLUTION:
This is not a standard solution but it worked for me: as many, I bought an 60 GB ipod video for xmas and as many I came home to forget about cd's by passing all my music and videos to this little beautifull machine. I started passing my files when suddenly a song didn't make it and since then it would reject any usb connection with my pc.
I couldn't even get it restored because the computer stopped responding when I conected the ipod. MY SOLUTION WAS TO FIND A FRIEND WITH AN IMAC WITH USB 2.0 PORTS; RESTORE IT FOR MAC AND THEN RESTORE IT IN A WINDOWS BASED PC.
The results where amazing, the ipod got recognized but the problem persists, when I transfer 2 GB more or less it hungs and the problem reapears.
THE PROBLEM
It seems that the problem apears when a sudden disconection leaves the file system of the ipod in a non-integral state.
In english: when the USB connection fails it damages the ipod hard drive organization.
So, when windows attemp to recognize the ipod it finds that the ipod has no format and I/O errors occur.
In a normal scenario, the unformated part (damaged part) of the file system is a folder inside the ipod and it is posible to read the formatted folders, hence, a restore is posible but takes more time to initialize.
In the worst case scenario, the unformatted (damaged) part of the file system is the section used to initialize the connection to the ipod as an external storage medium, so the ipod stops connecting even in file trnasfer mode.
I think that the solution works because of the nature of mac os x and the usb device management system.
So the main problem is the USB connection.
My theory behind this has to do with failures in the management of the USB 2.0 ports in windows.
As you may or may not know, it is not a responsability of the hardware vendors of USB connections to supply the apropiate driver for the end user; the USB driver is responsability of microsoft, and for example the USB 2.0 driver is istaled by the service pack 1 or 2.
I have an assus atv8x, which claims to have 6 USB 2.0 ports, but the instaled drivers in the device manager displays normal USB ports. Up to date I haven't been able to fully install a USB 2.0 driver because windows "thinks" that change the driver isn't a good idea, I should be able to fit in any driver I want since THEY ARE MY PORTS!!!!!
But the conclussion is that my board is out of the market and support for it is almost gone, I will never have the apropiate driver.
CONCLUSSION
So; I think the problem arises when you have USB 2.0 ports phisically but windows doesn't think so and fit USB 1.1 or 1.0 drivers; that makes the connection fail.
I love my ipod to much, enough to get a mac mini just for the little manzanita.
CLOSING COMMENTS
I am positively not sure if the problem is what I'm stating here and this information should not be intended to atack our beloved MS corporation or the elemental rush of manzanita to deliver ipods and not spending enough time to look after this issues.
I could and certanlly will be wrong but this information may be of use for everyone.
see you!
a7v8x + 1Gb ram + 2800AMD Windows XP

It could be a number of things.
Click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/tx/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
There is a link on this page for hotsync troubleshooting. Follow the steps in the guide and see if you can resolve the issue.
Post relates to: Palm i705

Similar Messages

Any solutions to the connection problems with AE yet!????

For quite a while now my computer has been dropping the internet connection and then finding it again CONSTANTLY. I have been trying to play counter strike on Bootcamp, and UT2004 on the mac side or even pokerstars, and everytime I play every minute or so the game loses internet connection or somthing for about 10 seconds and then it comes back and I continue playing until it happens again, and again, and again. Its driving me nuts. My computer is located pretty close to the airport, and there is no interference like phones or microwaves as well as no neighbors accessing the connection. I have also tried reverting to AE version 5.5.1. 802.11g Also i have tried changing the settings on the airport to 802.11g and the other one I can't remember which one but nether of those helped the problem whatsoever. If anyone could help me with this problem they would surely be my GOD! Oh and if it makes a difference I'm on a Intel Mac 2.0ghz.

Sean4258,
Since the AirPort Extreme base station is itself a router, it is likely that what you're calling a "router" is actually a modem. Since you're also describing a coaxial cable entering your home and screwing into the back of the modem, it appears that you have cable service rather than dsl service, and therefore, the modem is a cable modem.
It is important to you to determine what other ports are on that cable modem. Is there an ethernet port on the modem? If so, is there more than one? If more than one it may not be a cable modem, but a dsl modem. If you in fact have cable service and the modem is a cable modem, it's most likely that there is no more than one ethernet port on the cable modem.
It is also important to you to determine if you have an AirPort Extreme base station or an AirPort Express base station. There are two ethernet ports on the Extreme, which is round, 6.5" across and 3" high, and sort of space ship looking, but there is only one ethernet port on the much smaller Express which is only 3" x 3.5" x 1" in size. Besides the ethernet port, the only other port on the Express is a USB port and next to it an audio jack.
Your particular complaint probably originates from a less than optimal connection due to using a USB cable from the modem to the AirPort base station. This was NOT a good idea, and will forever make your game playing extremely unsatisfying. Your goal should be to replace the USB cable between the modem and the AirPort base station with an ethernet cable.
If it should turn out that your modem has NO ethernet port, but only a USB port, you'll need to get your service provider to replace the USB modem with a modem that has an ethernet port. If the modem was not provided by the service provider, that may present a problem of an extra expense in that it will need to be replaced by the correct type unit.
If the modem is a cable modem and has one ethernet port, get an ethernet cable of the appropriate length to reach as far as to the AirPort base station and plug it into the cable modem's ethernet port and into the AirPort Extreme's WAN port, which is the port designated by a circle of eight dots.
If it turns out that you have an AirPort Express instead of the larger Extreme, connect the ethernet cable to the lone ethernet port. Of course, remove the USB cable from both the modem and the AirPort.
If you also have a wireless printer, there will be no problem. However, if your printer is not wireless and needs to be wired, use the USB cable between the printer and the AirPort Express.
Everything should then work great!
Message was edited by: myhighway

Tried the posted solution for the RETR problem and it works once then it returns. How do you make the change permanent?

Tried the posted solution for the RETR problem and it works once then it returns. Once the email dl'ds the file deleted per the instructions returns. How do you make the change permanent?

Hi DOC808HI
# I don't know what you mean by "posted RETR solution". Could you please post a link to the suggested solution? Perhaps you are referring to this thread: https://support.mozilla.org/en-US/questions/991792 ?
# Anyhow any further troubleshooting information you can provide will be great e.g. Your Operating System Version (XP, 7, Mac OS X Mavericks), your anti-virus if any, your mail provider, your ISP, what you did, what happened with exact error message, what happened
Cheers!
...Roland

A Simple Solution to the Slowness Problem

Here is a simple solution that worked for me and will probably work for a lot of other people too. Hold down the ALT key when you open iPhoto. iPhoto then allows you open a new library or choose from your existing libraries. If you open a new library you can download images from your camera into the new library. Presto! You have a small number of photos to work with and iPhoto chugs merrily along with no slowness whatsoever. You want to go to another library? Simple: close iPhoto, then reopen it while holding down the ALT key again. Choose the library you want. I have hunted high and low for a solution to the slowness problem for months. This is far and away the best one I have found.
If you have a lot of photos in your existing library, you will need to divide it up into smaller libraries. I suggest making a library for each month of photos. If iPhoto is still slow on a particular library, divide that library into smaller libraries. This is time consuming, but at least you only have to do it once. It is worth it to get iPhoto back.

AlexCox, can you clarify that once you get the default model out and save it in the temp var, that your ONLY access to the data is then through temp and never through the JList methods?
Quick question for everyone: Are any of you using JList.setListData to set you initial dataset? I think that is where the bug lies. When I do not use it and start with an empty list, I am able to add to that list, and then remove from that list using the following line:
((DefaultListModel)myList.getModel).remove(###);
And this cast works everytime.
But when I start that list out with some data such as:
myList.setListData(myStringArray);
and then try to execute the above line, boom! I get the ClassCast exception.
I think setListData creates a whole new model which is an inner class to JList (which seems stupid when DefaultListModel seems made for this).
Just my thoughts on where the problem lies. I'll add my data directly to the list and see if that works better.
PK

Does anybody have a solution for the NAT problem?

Is somebody's application or Applet able to play any RTP stream behind a NAT Router? Can anybody establish any kind of connection / broadcasting between two subnets? I've got my RTP-Transmitter@public IP (using RTPManager...SendStream.start()), and I try to receive the stream from my local network which is behind a router (DHCP: 192.168....).
I read forums, newsgroups, looked for any solution for days all over the web but I've found nothing. Zero.
What's the secret? Any hints?
Best regards from Munich / Germany,
r.v.

Hi
I have the same problem.
I have one appletTransmitter that capture video from webcam and transmit it to other client on internet.
I try to transmit medialocator from appletTransmitter to servlet1 and then save MedialLocator as servlet attribute, then other client can connect to servlet2 that send saved MediaLocator to appletClient.
APPLETTRANSMITTER:
URL url=null;
MediaLocator media=new MediaLocator("vfw://0");
try{
url = new URL("http://localhost:8080/servlet1");
catch(MalformedURLException mue){mue.printStackTrace();}
URLConnection conn=null;
try{
conn = url.openConnection();
catch(IOException ioe){ioe.printStackTrace();}
conn.setDoOutput(true);
OutputStream os=null;
ObjectOutputStream oos=null;
InputStream in=null;
ObjectInputStream iin=null;
MediaLocator mResp=null;
String r=null;
try{
os=conn.getOutputStream();
oos=new ObjectOutputStream(os);
oos.writeObject(media);
//oos.writeObject("Prova Servlet");
oos.flush();
catch(IOException io){io.printStackTrace();}
catch(ClassNotFoundException cn){cn.printStackTrace();}
SERVLET1
ObjectInputStream objin = new ObjectInputStream(request.getInputStream());
MediaLocator ml =null;
try{
ml = (MediaLocator) objin.readObject();
context.setAttribute("media",ml);
catch(ClassNotFoundException e)
{e.printStackTrace()}
But on servlet1 there is a ClassNotFoundException: MediaLocator
What do we think about the solution and exception problem?
Best Regards,
Nico from Italy

Solution to ALL Connection Problems

Hi All,
I've been strugling for a very long time with some clients
(with connection problems with isa server and other servers). I now
finally got them connected!
The trick? Use Novell NetDrive to connect to your WebDav or
FTP server and map it as a drive letter (not unc path or network
location) and then configure Contribute to use Local/Network as
location for the files! Works like a charm.
So anyone with connection problems with ftp in a network
behind a firewall or proxy it will almost always work for you! I
also seems to have a little advantage in speed of transferring
files.
find netdrive via:
http://www.bcuc.ac.uk/main.asp?page=2117
or
http://www.acs.uwosh.edu/novell/netdrive.htm
or look it up on google
I hope this can help people, if it does please leave a
message!
Thanks,
Gab

Hi,
I was wondering if you would be able to help as the
connection setting you are suggesting sounds very similar to what i
have but still have problems. I am having problems re-connecting
people in Contribute. We use Microsoft isa server and which we map
to a local drive for connection.
We have users that were using Contribute fine for few weeks
and then say they didn’t use Contribute for 2-3 weeks and
tried to go back in to do more work, it would come up with an error
message that the connection is no longer valid. Then they go and
use the connection key to reconnect to Contribute just like
they’ve done the first time, it comes up with an error
message saying
“Contribute cannot verify your connection key. Please
contact your administrator for assistance.” But the key is
ok, even if I create a new key for the same role they still get the
same error.
Any help or suggestions would be greatly appreciated as I
have been battling with Contribute for the past couple of months
now.
Elena

Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.

Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G.

A solution to the 10810 problem

Some weeks ago I started having problems with my computer: it kept giving me the error message 10810.
After having the computer running for some time (12-24 hours) it refused to start applications and gave the error message -10810. Quitting running applications didn't help. In the end even things like emptying the trash were impossible and just produced errors (like Error type -1). Restarting the computer made the problem go away for some hours, but it always returned.
I tried the solutions presented on this forum (trashing some .plist-files and repairing the disk and permissions), but this had no effect.
Now it seems I have found the culprit for this behaviour: Virex.
I had on older version of Virex (7.5) installed on my Mac, but for some reason it had stopped working and I believe this led to the 10810-problems.
When I installed the evaluation version of Virex 7.7 the problems with error 10810 disapeared immidiately. So it seems Virex 7.5 had done something weird to my system, but installing the newer version overwrote the old program and fixed the bad behaviour.
Hope this helps other people with the same problem.

Hi Ben,
Thanks for your contribution to this ...
Personally I don't use Virex, but ClanXav
Dimaxum

CORRECT SOLUTION FOR THE APPSTORE PROBLEM

CORRECT SOLUTION (by AppleTeam)
1- Uninstall the old version of itunes you have (or just uninstall iTunes if you are already running 10.4.0.80
2- Uninstall Quicktime also
3- Uninstall Apple software update
4- Uninstall Apple mobile device support
5- Uninstall Bonjour
6- Uninstall Apple application support
(I would shutdown wait 20 seconds then fire up the computer at this point and then come back and install itunes)
7- Reinstall iTunes 10.4.0.80
Apple Tech said you HAVE to uninstall in this order. After I did this, the App Store started working correctly.

Thanks for the recommendation of the pad. I guess it
will deplete the battery life quicker.
I am wonder, the heat problem, is it a APPLE's fault?
No, as Guitaristguy313 stated, the heat problem exist in most (or all?) Core Duo laptops, whether they are Apple branded or Sony branded or Dell branded. The MacBook is not running warmer than another Core Duo based laptop.
So it's apparently the normal operating temperature of Core Duo laptops.
That's not too surprising considering that Intel document its Core Duo to be in normal operating temperature if the cores of the CPU don't run higher than 100°C, and 100°C is a very high temperature.
Hopefully MacBooks Core Duo's cores generally don't run higher than 85°C, but while within specs according to Intel, it's still very high so it's not surprising that the notebook shell temperature is high also (according to a test on a website, the shell can reach 50°C when the Macbook is used intensively).
So if you really want to have a culprit for the high temperature of the Macbook (and in fact also other Core Duo notebooks), it would be Intel.

Practical solution for the Heat problem?

Dear fellow Mac users,
I got my MacBook last friday. Yes, it's very Hot (temperature). I realised that you guys must be facing the same problem. I love this computer. But the heat is too much, i can't put it on my lap to work, when i travel...
Even typing on the keyboard for a long time in the library, i feel the heat coming out from the keyboard! so fustrating..
Are they any practical solution on how to reduce the heat? I dont want to dismantle the machine.
Thank you very much!
moses

Thanks for the recommendation of the pad. I guess it
will deplete the battery life quicker.
I am wonder, the heat problem, is it a APPLE's fault?
No, as Guitaristguy313 stated, the heat problem exist in most (or all?) Core Duo laptops, whether they are Apple branded or Sony branded or Dell branded. The MacBook is not running warmer than another Core Duo based laptop.
So it's apparently the normal operating temperature of Core Duo laptops.
That's not too surprising considering that Intel document its Core Duo to be in normal operating temperature if the cores of the CPU don't run higher than 100°C, and 100°C is a very high temperature.
Hopefully MacBooks Core Duo's cores generally don't run higher than 85°C, but while within specs according to Intel, it's still very high so it's not surprising that the notebook shell temperature is high also (according to a test on a website, the shell can reach 50°C when the Macbook is used intensively).
So if you really want to have a culprit for the high temperature of the Macbook (and in fact also other Core Duo notebooks), it would be Intel.

A possible solution to the MIDI problem with Audition 5.5

Hi, all.
In searching for other answers to my Audition 5.5 questions, I've been seeing lots of complaints on these forums about the lack of MIDI compatibility with this version. If you have an external MIDI sequencer, I offer a solution that you might find useful.
Go into Audition's Edit > Preferences and change the time display from minutes and seconds to bars and beats
Specify the time signature to the closest beat value of your song (exampe: if you're using both 3/4 and 4/4 time signatures, go with 4/4)
Set the tempo to match your song
Lay down a full length click track with at least a 4 measure click intro
Insert the same length click intro into every track (which, when working with previously sequenced tracks, is just a matter starting the machine in sequence-record mode with the metronome on, counting the appriopriate beats and turning it back off just before the song starts)
Mute all but the track you intend to record
Record each instrument track to its own file, save and open a multi-track session
Position the first beat of the click track far enough into the session to preclude needing to trim intros (you can trim the silence out with the click intro after mixdown)
Zoom in until a single click fits perfectly under the time indicator line
Drag or snap all the other tracks underneath it so that the first click of each track lines up
I use lots of instruments with slow attack (such as strings), or tracks where the instrument might only be in a few measures, so the 4+ measures of click intro are particularly useful.
Pretty low-tech, but quick and painless nonetheless. It suits my purposes, though I'd love to know if someone has a better method. Thanks for reading.
Sue

Bob Howes wrote:
The other problem is that, even among the "music creation" market, there can be big differences in the perceived importance of MIDI.
I'm not a musician myself but have worked closely with two very different composers. One of them does practically everything in MIDI (using Sonar) then tends to hand me the files to work with in Audition (after conversion to wave format). Some tracks are left in the form they came but others are replaced with live "real" instruments.
The other person is much more traditional. He plays more instruments than I can count and I help him by recording as he lays down drums, guitars, bass, brass, etc. etc. He owns a lot of keyboards but, even with these, he sends me line out and uses the actual keyboard sounds rather than laying down MIDI data.
So, if you asked these two how important it would be to have MIDI functionality, you'd get two very different answers. From some of the recording forums I frequent, I get the impression that my friends are a microcosm of the whole market . Some use MIDI a lot while others prefer the feel and sound of recording live instruments. (And, I'm sure, others inhabit a middle ground.)
True dat. Up until about a year or so ago, I didn't use MIDI, and so Audition was for me music production software par excellence. Then about a year ago, I started getting into MIDI, and now I'm not only using MIDI for creating keyboard-based tracks for overdubs, I'm actually writing songs using MIDI (whereas before songwriting almost always involved a guitar). MIDI has become huge for me, in other words. And whether I go to sites like Studio Central and read Tweakhead's guide to homerecording in which he tells people that modern music-making either involves MIDI or is MIDI-based, or whether I read articles in Sound on Sound magazine which constantly reference MIDI in their articles, have regular features about sample librairies that use MIDI, or look at the countless ads touting MIDI keyboards and controllers, it's clear that MIDI is as much a part of modern recording as guitars and mics. Before, I never used to get what Steve was on about when he'd say that Audition isn't music production software, because I had produced five albums of stuff using either CEP or Audition. Now, I understand what he means when he says that. When he says Audition isn't a music production software, he means 'Audition doesn't have MIDI'. However, the truth of the matter is that Audition is a wonderful music production software if you don't use MIDI, and a partial music production software if you do. You know, I've tried out other softwares - Reaper, Studio One, FL Studio (ha!) - and none of them come close to Audition for me. Sure, I can get by using Reaper for MIDI, but knowing how Audition does things, I know that I'd be happier doing it inside Audition. Hence, the continued lobbying. I want the best.

"Failed to open the connection" problem related to multiple tables in the report?

Post Author: Gadow
CA Forum: Data Connectivity and SQL
System specifics:
Web environment using ASP.Net 2.0 (from Visual Studio 2005 Professional)
Crystal Reports 2008, v. 12.0.0.549, Full
We have set up the following method for displaying reports via our website:
User is sent to a report-specific page. The user is given some filtering options specific to the report that will be viewed. When the user has specified the data filters, the user clicks a button.
The page wraps up the report parameters -- selection query, formula values, report location, the name to be displayed, etc. -- into a class which gets put into the Session object.
The page redirects to DisplayReport.aspx. ALL reports redirect to this page.
DisplayReport.aspx retrieves the report parameters from Session. A ReportDocument object is created and loaded, then set with the data from the parameters class.
A ConnectionInfo object is created and set with the relevant log on credentials. All of the reports draw from the same database, so the connection information is hard-coded as the same for all reports. The page then iterates through all of the tables in the Database.Tables collection of the ReportDocument and calls ApplyLogOnInfo to each table using the ConnectionInfo object.
The page is rendered and the user gets the filtered report.
We currently have seven reports. Five reports work fine and display the correctly filtered data with no error messages. Two reports generate a Failed to open the connection error and do not display. I have verified that the queries being sent to DisplayReport.aspx are valid, and as I said the connection information itself is hard-coded in the one page that displays the reports and this is identical to all reports.
The five reports that do work all have a single data table, either an actual database table or a single view. The two reports that do not work all have multiple tables. As far as I can tell, this is the only difference between the sets; all seven reports are based on the same DSN and I have verified the database on all of the reports. All of the reports were written using Crystal Reports 8, and all of the reports display fine in a Windows app I wrote some years ago using Crystal Reports 8. Again, the only difference between those reports that do work and those that do not is the number of tables used in the report: one table or view in the reports that display, more than one table (tables only, none use views) in the reports that do not display.
As for the code I am using, below are the relevant methods. The function MakeConnectionInfo simply parses out the components of a standard SQL connection string into a ConnectionInfo object. DisplayedReport is the ID of the CrystalReportViewer on the page.Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs)
        Dim o As Object = Session("ReportParams")
        Dim ReportURL As String = ""
        'Verify that there is a ReportParameters object
        If o Is Nothing OrElse o.GetType IsNot GetType(ReportParameters) Then 'Redirect to the error page
            Response.Redirect("/errors/MissingReport.aspx")
        End If
        ReportParams = CType(o, ReportParameters)
        'Verify that the report exists
        ReportURL = "/Reports/ReportFiles/" + ReportParams.ReportName
        ReportPath = Server.MapPath(ReportURL)
        If Not File.Exists(ReportPath) Then
            Response.Redirect("/errors/MissingReport.aspx?Report=" + ReportParams.ReportTitle)
        End If
        InitializeReport()
    End Sub
    Protected Sub InitializeReport()
        Dim RD As New ReportDocument
        Dim CI As ConnectionInfo = MakeConnectionInfo(DB_Bonus)
        Dim RPF As CrystalDecisions.Shared.ParameterField = Nothing
        RD.Load(ReportPath)
        If ReportParams.SelectString <> "" Then
            Dim Adapt As New SqlDataAdapter(ReportParams.SelectString, DB_Bonus)
            Dim DS As New Data.DataSet
            Adapt.Fill(DS)
            RD.SetDataSource(DS.Tables(0))
        End If
        For Each kvp As KeyValuePair(Of String, String) In ReportParams.Formulas
            Dim FFD As FormulaFieldDefinition = Nothing
            Try
                FFD = RD.DataDefinition.FormulaFields(kvp.Key)
            Catch ex As Exception
                'Do nothing
            End Try
            If FFD IsNot Nothing Then
                Select Case FFD.ValueType
                    Case FieldValueType.DateField, FieldValueType.DateTimeField
                        If IsDate(kvp.Value) Then
                            FFD.Text = String.Format("Date()", Convert.ToDateTime(kvp.Value).ToString("yyyy, MM, dd"))
                        Else
                            FFD.Text = "Date(1960, 01, 01)"
                        End If
                    Case FieldValueType.StringField
                        FFD.Text = String.Format("""""", kvp.Value)
                    Case Else
                        'For now, treat these as if they were strings. If things blow up here,
                        'we will need to add the appropriate formatting for the field type.
                        FFD.Text = String.Format("""""", kvp.Value)
                End Select
            End If
        Next
        For Each T As CrystalDecisions.CrystalReports.Engine.Table In RD.Database.Tables
            Dim TLI As TableLogOnInfo = T.LogOnInfo
            TLI.ConnectionInfo = CI
            T.ApplyLogOnInfo(TLI)
        Next
        DisplayedReport.ReportSource = RD
    End Sub
Does this approach not work with reports containing multiple tables, or is there something I'm missing? Any meaningful suggestions would be much appreciated.

Dear Dixit,
Please refer to the Crystal report landing page to get the details
information about the support for crystal report issues.
Please use the following thread to post your questions related to
crystal report.
SAP Business One and Crystal Reports
Regards,
Rakesh Pati
SAP Business One Forum Team.

TS1398 Hi, I tried every solution of the wifi problem but it still doesnt work. what should I do??

I tried all ways to fix the wifi problem of my iphone4S.（IOS4)
I even reset my phone...
still cant search nearby wifi

Bring your phone to Apple for evaluation

Is there going to be a Solution for the Capture Problem?

I've noticed that it is not only me but Final Cut Pro is not capturing video properly, it should not be so hard to capture from my camcorder(PV-DV51), when I hit log and capture the program just quits, after reinstalling, deleting preferences, the Firewire dock is able to see the camera, I can capture with IMovie for crying out loud! so the only question left, is do I have to upgrade Quicktime 7 player to the full version? because I did not find the upgrade in final cut studio package so do I have to purchase separately?
Thanks for the help

"The capture problem" is not, AFAIK, striking any number of folks. At least I've not heard of it. If you're running Final Cut Studio 5, there's not a separate serial - it's a gestalt thingie upon install.
FCP uses QuickTime to do its capturing (iMovie does not). You might try reinstalling QuickTime (don't skip any steps). Go to /Library/Receipts. Trash all QuickTime related .pkg files (Don't worry, you're only deleting receipts so that a full install will take place). Go to http://www.quicktime.com/ and download the latest installer and run it. Reboot.
post back,
Patrick

Is there a solution to the wpa2 problem with rt3090

unfortunately, I have a laptop with rt3090 wireless card.
It's work well in pclinuxos, but not in arch.
I want to know if there is a solution to this issue.
thanks in advance.

imtinge wrote:unfortunately, I have a laptop with rt3090 wireless card.
It's work well in pclinuxos, but not in arch.
I want to know if there is a solution to this issue.
thanks in advance.
Similar problem... same card, on other linuxs works perfect with connections at 600m/s in wireless... on Arch only 50m/s.
I've tried blacklisting drivers, the rt2800pci, etc... nothing solves the problem, any suggestion?

My solution to the connection problem

Similar Messages

Maybe you are looking for