My songs will be deleted if i change my user account (android)

please answer my question.my songs will be deleted if i change my user account 

OK....I'm stumped.  The message you are seeing is typically there to protect someone from syncing with a different computer/iTunes account.  Is there any way anyone else has used your iPad and possibly connected it to their computer?

Similar Messages

  • Want to sync music from brand new computer as old one was damanged. says all my songs will be deleted. solution, please?

    want to sync music from brand new computer as old one was damanged. says all my songs will be deleted. solution, please?

    Do you have all of your content in that computer's iTunes library ? There are some instructions on this page for syncing to a new computer : Syncing to a "New" Computer or replacing a "crashed" Hard Drive
    And if you have music on your device that wasn't purchased from iTunes and you don't have a copy of it on your new computer's iTunes then there are some programs listed half-way down this page which should be able to copy it back (iTunes will only copy iTunes downloads back from a device) : Recover your iTunes library from your iPod or iOS device

  • Will not allow me to change a user password

    Okay this is a little different. This has gotten me a little puzzled and I am hoping someone with some knowledge about File Vault etc can help.
    I have this machine where there is a user name and a password (that we can't remember) with File Vault turned on. We know the master password however the master password will not allow us to change the users password.
    We have tried changing the Master Password to ensure that the password is not the issue and that was successful. We tried using the Master Password to try and change another user account (not with File Vault turned on) and it gives us no problems.
    I have tried changing the password in System preferences and I get an error message CSSMERRCODE_MEMORYERROR. I tried going to the login screen letting the login attempts time out where it asks for the master password, then it prompts me to reset the password. No matter what I put in the "new" and "verify" (yes they both match) the screen just shakes and won't let me go any further.
    I have repaired the permissions and tried resetting the password with the Leopard DVD and also came across no luck. Because the User has File Vault turned on I can not even back up the data so I just delete the account and re-create the user!
    I am really stuck here and any help would be greatly appreciated.

    Okay strangely enough, I tried to reset the password back. We had an old File Vault password that we changed to the current one and then changed again during this process. So taking what you said, I reset the Master password to the original one we had a long time ago. It did not allow us to change the password. However when I changed it back to the one we had changed it to a second time, it wouldn't let me change it at the login screen but it allowed me to change it in the Account Management under System Preferences.
    So it is fixed. Needless to say I disabled File Vault and it will never be used again! Thank you for your reply it definitely helped me resolve this issue.

  • I cannot change any user account icons

    I cannot change any user account icons. Under the Default icons it says "No Items". Any new users are set up with a tennis ball with no other options. In the initial set up, there were a lot of choices. Now they're gone. It there a missing file?

    Yes the missing user icons is unexplained and nothing I've tried has resolved it.
    It seems to have occurred as part of the 10.8.2 update for me.
    No user shows any of the default or custom user icons available in the users system preference. All the Apple icons are present in the /Library/User Icons folder as well as custom icons but they do not appear within the system's panel period. No icons appear there. You are able to add icons to it -per user. Any done in this manner are saved in that user's preferences so this does not affect the system level. I have tried removing preferences. I have tried removing the icons and adding them back including as root but all changes are applied to the user only. I have run Diskwarrior, repaired permissions, etc. And nothing changes this.
    I cloned the image to another laptop, deleted all preferences from main library, restarted, logged in expecting it to be a preference issue. Still no user pictures shown for default user. In case the original users were corrupt, I created a new user and logged in with it. It was given one of the OSX pictures randomly chosen by the system. I logged in as user and still no pictures are shown. Tried to do a reinstall of 10.8.2 combo update and system refuses saying I cannot be done. Booted from recovery partition and it  allowed an internet recovery.
    No change. Took a brand new laptop and used user migration to copy the users over to it with all settings. Broke that system as well. Repeated creating new users, etc and no change. This is really annoying. I can repeat migrating users only and then partial settings to try to narrow it down but its time consuming.

  • Change of User Account in E-Recruiting

    Did E-Recruiting ever intend for the change of a User Account in R/3 for an Internal Employee who is a Recruiter, or a Manager, or an Administrator? For example, an employee's 0105-0001 user id is initially set to 'xxx'. So, in E-Recruiting this employee's CP->B-208 user record in HRP1001 is 'xxx' and USR02-bname is 'xxx' and USREFUS-bname is 'xxx'. But if Employee's 0105-0001 record get's changed to 'yyy', ALE only creates new USR02 as 'yyy' and new USREFUS as 'yyy' and CP->B-208 as 'yyy'. What happens to all the other HRP51xx tables where the EXECUTER, SOBID, and RES_SOBID is still 'xxx'?
    In addition, what if user id 'xxx' gets reused by another employee in R/3? Wouldn't this compound the problems in E-Recruiting in the various HRP51xx tables?
    Is there an SAP conversion program or function to handle this? Or, is this even a concern and the HRP51xx tables do not need to be changed to reflect the new 'yyy' user id?
    Any help would be appreciated,
    Sincerely,
    Don Merical
    Edited by: Don Merical on Jun 18, 2010 3:47 PM

    Hi Don,
    this is indeed a big issue. There is no solution by SAP available.
    The ALE automatically exchanges the User ID on the candidate side. But the infotypes for the candidate have to be updated by yourself.
    So you will have to write your own report.
    So you need to take care of each e-recruiting infotype containing a user.
    You will have to update the frozen documents for the publications and update the questionnaire tables (HRHAP_APPER).
    Best regards
    Sebastian

  • Mac will not let me log in to user account

    Two days in a row, my Mac (2 x 2,93 /ghz 6-Core Intel Xeon) (64 GB 1333 MHz DDR3) will not let me log in to my user account. I used to turn my computer off every day, but the tech guys told me I need to leave it on all the time. Please note: I am the one responsible for fixing this computer. I ran Disk Warrior this morning and repaired the disk permissions. Disk Warrior found a few corrupt things like .plist files which couldn't be repaired. I deleted them, however there seem to be a lot of things in the disk permissions some of which couldn't be repaired. Anyone have any ideas.

    Your GMail email is on Google's server, so you should find the same messages there that you saw before. However, any bookmarks, saved passwords, etc. that you did not sync with Weave or another solution that backs up your settings to some place on the web would need to be rescued from your old computer.
    Check out this article for more insight: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile]

  • 2012 R2 RBA: Remove / Delete buttons greyed out Administrative users account (sec role/scope) clean up

    I am seeing something odd with one of my RBA settings.  Keep in mind I am seeing this as a 'Full Administrator'.
    I created a new test Security scope, Security Role, created a test Active Directory group and then entered that AD group as a new account name under Security>Administrative users.  I added the new Security Role under the Security Roles tab of the
    Account name (Administrative users) properties and also added the security scope that I created under the Security Scopes tab.  I was able to see all the settings I had created/exported in the RBA viewer and everything with the role worked as desired.
    I am now looking to clean that up but I don't seem to be able to.  I am starting under Administrative Users>Account name and trying to unlink the Security Roles and Security Scopes that listed in those tabs.  However, remove and deletes on this
    stuff are all greyed out.  If I add another role to the Security Role tab I can then remove that, but I cannot remove this 1 particular one.  The result is that I cannot remove the custom Security Scope, Security Role and ultimately the Administrative
    user.
    Does anyone have any idea why I can't remove the security roles and scopes from the Account Name?

    I am now looking to clean that up but I don't seem to be able to.  I am starting under Administrative Users>Account name and trying to unlink the Security Roles and Security Scopes that listed in those
    tabs.  However, remove and deletes on this stuff are all greyed out.  If I add another role to the Security Role tab I can then remove that, but I cannot remove this 1 particular one.  The result is that I cannot remove the custom Security Scope,
    Security Role and ultimately the Administrative user.
    Does anyone have any idea why I can't remove the security roles and scopes from the Account Name?
    I'm able to "delete" one admin user or group (account name) from Administrative users node (\Administration\Overview\Security\Accounts). I tried with custom security role/scope etc....even the same user was part of \Administration\Overview\Security\Accounts.
    It seems something wrong with your FULL admin account ? Do you've any other FULL Admin account? If so, can you try with that account?
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • Can I change the user account on a pre registered macbook pro?

    I'm looking at buying a brand new Macbook Pro from someone who has only used it to do a system restore from a previous Macbook. It's a 2012 model and thanks to his system restore it is now running Mavericks. Can I update the user account to my name so that I have the latest version of OS X without reverting it back to Lion?

    Yes.
    Specifically you create a new admin account with your name (or any other name of your choosing), log in with it and then delete the other account you don't want.

  • Changing existing user account to forward mail: how to send stored messages

    Hi there,
    I have changed one of my user accounts to forward mail to another mail-adres. There is quite some mail in his mailbox, that still needs to be downloaded. I want these stored messages to be sent to his new address, but I can't find a way to do this.
    Do you have an advice?
    thanks in advance

    Is the new username an established email account with an email provider? If not, that is your problem. You cannot just make up a username and expect to receive email with it.
    I would not suggest changing usernames due to a new email account. I would set up a new account in Thunderbird for the new email account.

  • Change my user account?

    Can I change my iTunes user account name and password without loosing access to my purchased music? How do I do this?
    Kevin

    Yes.
    After you sign into the iTunes Store, in the top right is a box with your email.
    Click it, verify your password, then you can change your email in the account settings.

  • Need to change OTN user account email id

    How can I change my OTN user account email id. This email is very old, I need to change it to my new one. Please let me know, email me at [email protected]

    Mahantesh,
    You need to maintain relationships between trusted/trusting system for the remote user.
    If the user U_1 has to work under client M_1 in the Trusted System C00 under the user U_2 with the client M_2 in the Trusting System S00, using a Trusted/Trusting relationship, then the user(U_2,M_2) must have an authorization object S_RFCACL in System S00 with the following properties:
    RFC_SYSID : C00
    RFC_CLIENT: M_1
    RFC_USER  : U_1
    RFC_EQUSER: N
    RFC_TCODE : *
    RFC_INFO  : *
    ACTVT     : 16
    Check note 128447.
    Hope it helps..
    G@urav.

  • Itunes song will not delete and I can't edit the info

    I added some songs to itunes 9 and now i want to delete one of them. I tried using delete, right-click delete, and edit delete. The window that asks if i'm sure I want to delete the song from the library doesn't even pop up. It's like the song isn't even there. It still played when I clicked on it but I can't edit the info either. I'm unable to click on the info boxes and the tabs for lyrics and artwork are grey. Then I realized I should just delete the actual file from the folder. That deleted from the trash but now the song says it can't locate the file and I have an exclamation mark next to the song name and it still won't delete. I have over 5,000 other songs and have never encountered this problem. I've deleted other songs since using itunes 9 and it has been fine. Is there something wrong with the song file? Please help!

    I'm having this problem too. It does not seem to be a permissions issue. I have found so far that restarting iTunes will allow me to edit a song I have previously been unable to edit.
    This is happening with iTunes 9.0.1 (9) I can't say for sure that it wasn't happening under 9.0 - but I didn't notice it then.
    I find that songs are uneditable after they have been downloaded to iTunes. Not all songs, just some, on an unpredictable basis. I don't know if there are other older songs with the same problem, or whether it's just new downloads that are being affected.
    I've also noticed that it's impossible to delete one of these songs from a playlist.
    So - in summary : Download an album ... 2 or 3 songs on the album will be impossible to edit (song info) and impossible to delete from a playlist ... restarting iTunes allows them to be edited ...
    It's a really odd one.

  • Song will not Delete

    I currently have 23 songs under "media" but when its on shuffle a random song called Fontainebleau - Omorphos comes on what was already on the phone, i delete it but when i restart the phone it comes back :/
    Thanks
    In 
    Advanced

    StainedGlassEyes wrote:
    @feeling your pain. Why? There is really no customer support for this in the months since this problem has been discovered?
    Hello,
    Actually, there is no formal customer support via these forums whatsoever. These forums are user-to-user, not user-to/from-RIM. For formal support, you must contact your carrier.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Why does the new itunes update say my songs will be deleted?

    Is there a way around this?

    Do the following two things:
    In the left-hand pane, right-click the name of the playlist, choose Edit Smart Playlist, and make sure that "Live Updating" is checked.
    In the list itself, click the column header for "Last Played" so that the list will sort according to when it was played, with most recent on top.

  • Will Mail delete messages in my online Gmail account?

    I have recently set up Mail on my Mac and have it sync'd to get messages from my Gmail account. I am new to this and I haven't tried this before now and Mail has imported over 300 messages from my account! My question is: If I delete these messages, will they be deleted from my mail account when I check them online? I would like to be able to just check my mail quickly rather than logging in every time in Safari...
    Thanks for all your help on this!

    Crap! Now, THAT's just perfect! >=[ I didn't want my messages to leave my folders on my Gmail account online! I checked it just now. =[ How can I get them back??
    **Thanks for your tip. I un-checked that box so that it doesn't remove a copy from the server...**

Maybe you are looking for

  • StudioMX 2004 validation problem

    MacOS 10.4.11 PowerPC    STUDIOMX 2004 W/FLMX PRO   EDUCATIONAL ENGLISH Upon starting DreamWeaver, I get an error: trial period has expired. I continue, and my old Product Key Number is all there. I followed the steps in the Adobe Forum on entering t

  • BAPI for Getting Project Profiles in Project System

    hi,      Can any 1 tell me the BAPI to invoke to get project profiles from project system. Thanks, Debashish Sarkar

  • R/3 is slowing down when BW jobs triggers.

    Hi Experts, We have a severe performance problem with R/3 whenever BW jobs scheduled to bring the data from R/3. Can anyone through some ideas why this is happening? Thanks & Regards, VSN.

  • Why haven't my contacts come on when I have set up iCloud

    I want to no why when I have set up to iCloud my numbers haven't come onto my phone?

  • What is the date in Robocopy's /minage ?

    We're looking to move some files based on the "last saved date" or just the "date" attribute as they appear to be the same. Does the /minage switch in Robocopy specify the "date" attribute as opposed to the last modified or last accessed date? Orange