My sons Ipod touch is disabled,has forgotten the passcode

My sons Ipod touch is disabled,has forgotten the passcode,what do I do?

Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Similar Messages

  • HT4113 How do I unlock my sons ipod touch as he has forgotten the password!

    My son has forgotten his passcode, how do you reset please?
    Tried the on/off button with round button hold for ten seconds, no joy....

    On/Off turning doesn't solve this Issue.
    The only way for that is a forced restore (that means a restore and will delete all data from die iPod).
    1. Turn the iPod Off
    2. Put the USB cable in ur PC (direct not in a HUB)
    3. Press the Home Button
    4. Put the USB cable in the iPod (still pressing the Home button)
    5. Now the iPod should appear in iTunes > make a restore
    Yes the complete data on the iPod will be deleted, no there is no other way as long as nobody knows the password.

  • My ipod touch is disabled, i installed the latest version of itunes, but cant figure out how to restore, can anyone help with this?

    My ipod touch is disabled, i installed the latest version of itunes, but cant figure out how to restore the ipod, can anyone help?

    If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
    First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
    At the command prompt:
    Type %windir%\system32\msiexec.exe /unregister and hit enter.
    Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
    Type %windir%\system32\msiexec.exe /regserver and hit enter.
    Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
    Restart the PC and try another reinstalll.

  • I am not able to download any new music to my ipod touch. It has all the updates.

    I am not able to download any new music to my ipod touch.  It has all the new updates.  When I connect my ipod to the computer, the new music does not download. I need some help please!

    Is your music from Itunes? If it's not that's probably why

  • How do I enable my ipod touch if I have forgotten my passcode?

    How can I enable my ipod touch if I have forgotten my passcode?  I can't restore it from itunes because it is locked.

    Hold down the sleep/off button for three seconds. Then keep holding it, and push the home button and old both for 10 seconds. The screen should go black about 6 seconds into that. After that, let go of the sleep button and keep holding the home button for 10 seconds. This will force the iPod into DFU mode, and you can restore it in iTunes. If at first you don't succeed, try again, because the timing can be tricky.

  • Does any one know how to unlock the touch if you have forgotten the passcode?

    Does anyone know how to unlock the i-pod touch if you have forgotten the passcode?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Rob967 wrote:
    how do you connect to itunes if u cant remember passcode

  • I am trying to restore an older iPod Touch, but do not have the passcode.  I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account.  Help..

    I am trying to restore an older iPod Touch, but do not have the passcode.  I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account.  Help..

    If it is asking for the screen-lock passcode then:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Otherwise follow varjak paw recommendation

  • I just repaired my sons ipod touch and he has a passcode on it and cant remember it and it says to connect to itunes but doesnt work. Does anyone know what i can do?

    I just repaired my sons ipod touch and it is passcode protected and he dosent remember the passcode and it says to go to itunes and that does nothing does anyone know what I can do?

    If you can't remember the passcode then you will need to restore the device.  http://support.apple.com/kb/HT1414

  • My sons iPod touch 5 keeps flashing with the apple logo, how do I sort it?

    My sons iPod touch 5 keeps flashing the apple logo, he was playing on it and then that happened?

    Has the unit EVER been jailbroke?  Has it EVER been dropped?  Did it EVER get excessively wet?  Did you EVER load a pirated developer's version of the IOS?
    If "No" to all the above, first try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • My grandson has a iPod touch 4th and has broken the screen, does any body know how much apple charge for replacement and can you wait for it to be done or does it get sent away.

    My grandson has broken his screen on his iPod 4th touch. Does anybody know how much apple charge to replace and do they do it while you wait

    Apple will exchange your iPod for a refurbished one for $199 for  64 GB 4G and $99 for the other 4Gs unless you have AppleCare+ extended warranty. Then it would be $29. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the screen yourself if you are up to it
      iPod Touch Repair – iFixit          

  • HT5569 I have a ipod touch and it has updated the device and is asking me to join a net work and it does not show any net works and ony has other but i dont know any networks so what do \i do

    I have a Ipod touch and am un sure how to connect to wi fi it is asking me to connect to other but I dont know any so what do I put in there
    cheers

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT4113 I found a ipod touch and trying to break the passcode to reset to factory.

    Found a ipod touch with passcode need info on reseting, or clearing to factory?

    download itunes, create account sign in.
    download the ios version for your ipod
    connect ipod touch, power off. hold power/menu button for 10 sec, then release power'while still holding menu. enter dfu mode/recovery
    hold alt when selecting recovery/upgrade in itunes, this will allow you to select the ios software to restore from computer.
    done.

  • Why does my Iphone 4S and my sons Ipod touch (4g) no work with the Sony XDR-DS12iP after IOS upgrades?

    According to Sony my apple devices are compatible - and they used to work.... Since IOS 5 Upgrades they no longer play music through the docking systems speakers.  They charge, but they refuse to play.  Why? What have you done Apple to mess these expensive devices up?  My eldest son's Iphone 4 works ok.
    http://pdf.crse.com/manuals/4199738141.pdf
    This says that the Apple devices are compatible and supported.
    Come on Apple - I would like answers as to why I have two devices that were designed to work with your gadgets that did work but no longer do!!
    Why? Why? Why? Why??

    My iphone 4s & Ipad are also having the same issue  for my phone I did find this solution that seemed to work - only for my phone though:
    go to: settings>general>accessibility turn on "assistive touch"
    tap on the the new icon that appears on the screen (top left side -the black square w/a white circle inside)
    go to "device"
    I found my device was muted so I tapped it to unmute  - I have had to do this a few times, but it does seem to resolve the immediate issue. Try it - but apple needs to come up with a solution SOON

  • How do a restore my ipod touch when I have forgotten my password and can't use recovery mode?

    I have an iPod touch which i have forgotten the passcode for, I have tried restoring it and recovery mode, but both don't work because it tries to update my software everytime but says that it can't read and write to this device, and then wont continue past this point and restore.

    - Try DFU mode and then restore               
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try another cable
    - Try another USB port
    - Try on another computer.

  • How do you reset an IPOD touch when you don't remember passcode?

    We have an old IPOD Touch and don't remember the passcode.  HOw do we reset it to factory settings?  ITunes will not recognize the IPOD.

    See http://support.apple.com/kb/HT1212
    Try these steps if iTunes won't recognize it: (assuming you have Windows) http://support.apple.com/kb/TS1538

Maybe you are looking for

  • Error while duplicating a panel with control dynamically associated to a splitter

    When you try to duplicate a panel where a control has been dynamically created and associated to a splitter, you receive error -153: Item is already attached to splitter control. See attached project which shows this behaviour: you can move the split

  • I can receive AOL mail on my iPhone but I cannot send email.

    I can receive email for my AOL account on my iPhone but I cannot send email from the iPhone. I can send email OK from a computer. I have AT&T service.

  • Ship to party Address is not Printing

    Hi All, We are facing a problem for a particular PO. When we see the print preview for a particular PO for the first time Ship to party address is not printing .Whereas in the next time if we see the print preview its showing that address.Its because

  • Ad-hoc query in PA

    I need to add personnel area, personnel sub area, emp group and sub group field in 'Selection fields from infoset' section in SQ01/02 adhoc query so that user can execute query for these fields as a selection. How to do it.

  • Error in MTO material

    Hello all, I have created a sales order with respect to a quotation, in this case if i am on the line item & click on display availabiltiy tab which is given below on the screen  its further shows tabs of Avail chk, Check rule  etc There is also a ta