My Sony car stero is giving me a usb overload error message. How do I fix it?

Need help

Hi Scotzo21,
I'm sorry for the delayed response, however, thanks for bringing this to our attention. There are several reasons why you'd get such error message. Either the USB device is out of order, not plugged in properly, device connected is not supported, or there is a problem with the USB device.
To help resolve the issue:
1. Try disconnecting your USB device, then change your input source. Try switching to radio for a couple of minutes.
2. Try plugging in a different USB device.
For better information, can you please tell me the model number of your car stereo. In the meantime, try the steps and see if it helps.
Let me know how it goes. If my post answers your question, please mark it as "Accept as Solution"
Regards,

Similar Messages

Itunes giveing me error -23 how do i fix

need help itunes giving me error -23 for civil wars itunes lp each time try to download how do i fix this problem

HI,
to whom it may concern,
Concerning the problem of 0x000000f, I needed to format my ASUS K53S laptop, and the same error kept on appearing. I didn't know what to do. I even tried all the procedures mentioned on the net, but alas nothing worked; until it occurred to me this:
All you have to do is:
1- go to bios setup
2- disable boot from Hard drive COMPLETELY.
3- activate booting from your CD Drive
4- Save changes and exit.
5- restart your computer .
6. you'll be asked to click any key to boot from CD Drive.
the PC will start from your CD Drive, and you can go on ..

I have a MacBook Pro core 2 duo giving me Internet problems the error message I am getting is "connection timeout" any solutions ?

I have a MacBook Pro core 2 duo giving me Internet connection problems. Every other computer around me can connect to the Internet except me. The error message I am getting is "connection timeout" I've attempted to google solutions with no luck. Help anyone ?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.

Sims game keeps quiting and giving me a type 3 error message!

Hi,
I have been playing The Sims Original on my Power Macintosh 8600/300 for awhile now and all of a sudden after installing well over 800 new items (Like TVs,couches) it continuesly closes out and gives me a type 3 error message sometimes it freezes the whole computer as well. It simply just closes out as if I clicked it then once its closed it will give me the error message. I have never had this problem before and yes Iam pretty sure it can possibly be the items but theres so many and I dont want to loose them all! I dont even know for sure if thats the problem. My PM 8600 runs Mac OS 9.2.2,and has 160MB of RAM.
Thanks all

Well I just installed it into my iMac yesterday (Without any of the downloads) and it works fine! I guess it was the downloads. Ill have to watch out for them. I dont know why though, Even after I got rid of them all on thePowerMac it didnt stop with the message so I put them back! Then I got a type 2 error. Why? I like it on the iMac but I cant get my saved files over on this mac. Can I share files VIA USB?
Thanks

Epson printers keep giving "media not loaded correctly" error message

When sending print jobs that consist of multiple copies to Epson printers from my dual 3 GHz Quad-Core Intel Xeon Mac with OS 10.5.8, the printer will frequently (more than half the time) grab a sheet of paper and spit it out with nothing on it, and then return the error message "Media out or not loaded correctly". I've had the exact same issue with their 1280, 2400 and 2880 printers. I've been struggling with and troubleshooting this issue for a couple of months now, and I believe I've narrowed it down to the operating system. It happens when printing from both Photoshop CS3 and CS4. It doesn't happen when I print from another computer running OS 10.4.11.

Dave Lesko wrote:
...the printer will frequently (more than half the time) grab a sheet of paper and spit it out with nothing on it, and then return the error message "Media out or not loaded correctly". I've had the exact same issue with their 1280, 2400 and 2880 printers...It doesn't happen when I print from another computer running OS 10.4.11.
Interesting observation of the OSs. Have you tried Epson's suggestions for the 1280 printer and 2880 printer?
BTW: This was a constant issue with my Epson 3000. It happened mostly with paper larger than tabloid size, which is the reason for having a large format printer. There was no difference between versions of the OS. This was with the paper tray, so it may not be relevant to your printers. However, when I first got the printer it came with some "cleaning sheets" to run thru the printer when changing different types of paper to clean the rollers. It seemed to help... What worked best was to pre-load the first sheet of a multiple page document.
HTH

My Time Capsule is giving me a "read only error message"

I have been trying to work through this issue for two days to no avail. I've got a 500 gb capsule. I Tried to set up a call with Apple but they just left me on hold and then hung up. I just want my time capsule to get back up and running.

Buie wrote:
I have been trying to work through this issue for two days to no avail. I've got a 500 gb capsule. I Tried to set up a call with Apple but they just left me on hold and then hung up. I just want my time capsule to get back up and running.
You would do better posting in the TimeCapsule forum here:
http://discussions.apple.com/forum.jspa?forumID=1253

IMac is giving me "cannot find server" error message. HELP!

here is the message I am getting.
http://thoughton.co.uk/digitallife/weblog/images/safari_noserver.jpg
this is regardless of using firefox or safari.
now
I just recently moved and am connecting to a new network.
My airport shows the network, I enter the password, it says it fully connected.
I ran the diagnostics and it says ALL aspects of the connection are running as they should
I have tried:
restarting my computer
deleting the airport connection and then re adding it
clearing my cache
also deleting the "systems preferences" so it would reset all my proxies and what not.
all to no avail.
My roomate has a macbook and can connect without any problems.
I have gone into his and compared the proxies, and DSN and they match accordingly.
but yet, I am still getting this message everytime I try and load a web page
It will not connect to itunes store or any file sharing networks( iphoto, aperature, etc.)
I am at a loss here and really really need to solve this so I can continue to work at home.

Hi Jacob,
Let's try this & report the outcome...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
The interface that connects to the Internet should be dragged to the top of the list.
Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
208.67.222.222
208.67.220.220

My 4th generation iPod touch stopped giving me notifications on all apps. How do I fix this? (The sound is up, I have wifi, all notification settings are on)

The sound is up, I have wifi, all notification settings are on

Add one more disgruntled user to the list. First noticed that I couldn't download upgrades on my iPhone. It would prompt for password as normal, would briefly show "waiting" on the app icon and then just stops with app store still showing update. True deleting the app and installing from iTunes. This worked, but iTunes library had old version of app so it still showed an upgrade. I then deleted the app from the phone and iTunes and that is when I started getting the 11111 error. I've since discovered that I can download any new content to any of my linked iDevices, but cannot download any type of previously purchased content. No previously purchased music not on device, no previously purchased uninstalled apps, no installed app upgrades, etc. ALL show up in purchased content lists, but when you attemp to download it appears to be starting and then simply fails with no errors on the iDevice(s). I've also tried signing out of my account in settings - store, performing a hard reset and then signing back in, but alas, no success.
C'mon Apple, obviously a problem that is happening to numerous users and it started happening to us all at the exact same time. You got us iAddicted, now give us our iFix.

HT4623 I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it on my phone when I unplug but not anything thru the stero except static. Help!

I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it very slightly in my speakers if I turn up the speakers but it is so faint. It plays thru its own speakers and my radio plays thru my speakers in my car so my its not my speakers.Help! Thank you!

Hi Novagurl2369!
I have an article for you that can provide some helpful troubleshooting steps to address your issue:
No sound through stereo headset1
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Take care, and thanks for visiting the Apple Support Communities.
-Braden

I have iphone 6 with ios 8.1.1. The bluetooth pairs with my sony car radio and everything works fine. However, the iphone won't stop searching for other devices.

I have an iPhone 6 with ios 8.1.1 operating system. The Bluetooth pairs with my Sony car radio and works fine. However, the iPhone will not stop searching for other devices. This does not seem to affect anything, but I can't help but think it is using battery power.

One possibility:
How do you know it is searching for other devices? Because you opened Settings > Bluetooth?
Why is it searching for other devices? Because you opened Settings > Bluetooth?

Connecting c5 to sony car unit!

Hi all,
when I used to connect my old nokia 6300 to my car radio/cd unit (sony 6000 cd) via bluetooth I used to have the call list (as stored in the phone by name displayed in, out, missed etc on the car head unit screen when the phone button was pressed.
I was able to scroll through these up/down and select dial to make a call.
I have now upgraded to C5 and although connects and makes and recives calls fine all that is displayed in the Sony car unit screen is the numbers not the 'names' as stored on the phone making it tricky to know who I'm calling.
Am I doing something wrong do I need to change a setting on the phone? I have 'remote sim' on in the bluetooth menu in the phone.

Hi
This issue has come up before on some car manufacturer units and aftermarket ones too...
Problem is that some factory and aftermarket systems have not implemented all the subset profiles within Bluetooth, as many have been added since their production date. If the unit has the option to have its software updated, then fully recommend this, however not many were this forward thinking!
Therefore, as newer handsets come out (from many manufacturers,not just Nokia) that use these update profiles, the two units cannot "talk" to each other.
BUT
There is a possible solution.
Firstly make sure your contacts are stored to the phone, not the SIM.
Secondly, download the contacts application here:
http://europe.nokia.com/get-support-and-software/product-support/nokia-616-car-kit/car-kit-software
(Choose the one that matches your phone)
Connect your phone to the pc in pcsuite mode and install the application to the phone memory.
Delete the pairing on the phone AND the car kit.
Reboot the phone and then pair & connect to the car kit.
If this doesn't work, delete the contacts application from the phone and try this one:
http://europe.nokia.com/get-support-and-software/product-support/nokia-810/software
These apps were designed to convert the contacts sending to an older Bluetooth subset but for Nokia Car Phones so it cannot be guaranteed that they will fix the communications with your unit - but we can hope!
Finally,
with some units you can actually "send" the contacts to the car by
going into the contacts menu, selecting "mark all" and then "Send via
Bluetooth". In some cases the car kit appears to have only received on
contact but then actually does have all names etc.
One
final point is that if you have images stored for your contacts, some car units tend to go a bit crazy so you should delete
these.
Hope this is of use....

How to check original status of Sony Car Music Products

If I brought some original sony car studio system from some prelisted Sony delier (music and speaker instrument both)
How I can check whether it is original or not with their prementioned product id on the packaging

Hello Akshay,
The original Sony Car Stereo system will have the "Sony" label or logo on it. Also, the Car Stereo will be come in the original manufacturer's box and will include all the supplied items mentioned in the user manual.
If you think you received a counterfeit Car Stereo, you can contact Sony customer service for assistance, mentioning the reason which makes you feel that the Car Stereo is a counterfeit product. You can find the contact information for Sony Consumer Electronics customer relations team in the below provided link.
http://esupport.sony.com/US/p/contact-relation.pl?
If my post answers your question, please mark it as an "Accepted Solution."

Xperia Z3 compact won't connect to Sony car stereo with usb

Hi, To my dissapointment my Z3 won't connect to my Sony car stereo via USB at all, it seems it is uncompatable whereas my iPod does no problem.. Any help with this?

Most cars have an AUX connection which connects to the headphone jack and to AUX is also a headphone jack so a double ended 3.5mm audio jack which is for phones where as the USB connection is designed for dedicated mp3 style devices like your ipod

The clock on my Sony car radio loses time

The clock on my Sony car radio Model # CDX-GT56UIW loses 7 minutes a day. Is there a way to fix this without resetting it daily?

Hi Sunsetswest,
Setting the clock
The clock uses a 12-hour digital indication.
1. Press and hold the select button.
The setup display appears.
2. Rotate the control dial until “CLOCKADJ”
appears, then press it.
The hour indication flashes.
3. Rotate the control dial to set the hour
and minute.
To move the digital indication, press
[SEEK] –/+.
4. After setting the minute, press the
select button.
The setup is complete and the clock
starts.
To display the clock, press [DSPL].
Thanks.
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Connecting my 3rd gen shuffle to car stero

I recently got a 3rd gen shuffle for my birthday and when I connected it to my car stereo it displays N/A USB. What is this? I have connected other usb nano's to the car stereo with no problems. Why would the shuffle not work when plugged into a car stereo? It is a Pioneer stereo.
Help Seabo

scosche http://scosche.com/products/sfID1/210/sfID2/343 makes two kinds of adapters to solve this problem...

My Sony car stero is giving me a usb overload error message. How do I fix it?

Similar Messages

Maybe you are looking for