My Sony Handycam can't connect to iMovie 9.0.9

I have a Sony DCR - TRV17 that I can connect to iMovie HD 6.0.4 with a Firewire 400 cable (6 to 4 pin) and I can import video. However, when I open iMovie 9.0.9 and try to import video, using the same setup, iMovie 9.x "quits unexpectedly." Does iMovie 9.x require a Firewire 800 connection (4 to 9 pin)?
I've read that some are having problems with certain cable brands. I'm pretty sure that this cable came with my camera and since it works with iMovie HD 6.0.4 then I don't think it is defective.
Any help will be greatly appreciated.
Gruene Guy
I'm running Snow Leopard 10.7.5; on a Mac Pro 1,1
Message was edited by: Gruene Guy

Hi
With iMovie 9.0.4 - the 4-6 pin cable works for me - so for 9.0.9 I think it should too.
My notes on this
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Similar Messages

Sony HDRXR150 won't connect to iMovie 8 PLEASE HELP

I'm about to throw in the towel and forget camcorders that will connect to my Intel macbk Pro ('08) iMovie. Been researching this for 3 weeks and was told directly by Apple tech that any using formats .mpeg,.hdv or .dv would connect immediately to iMovie upon connecting camcorder and from there I could make a playable DVD.
So I finally settled on the Sony HDRXR150 and brought it home today > took a few minutes of video ( on the "HDFH" setting > connected with the USB cable. (discovered No firewire connection on this camcorder - although I seemed to read one other poster said he connected with the firewire cable. I had read that to connect with iMovie you needed firewire connection) > chose the "internal" connection ( NO "HD" connection icon appeared) > the white mounting icon appeared on my desktop. That is as far as I could do anything.
PLEASE PLEASE help me. I like the camcorder but would be willing to get a different one (can take this back within 14 days) IF this one cannot be directly connected to iMovie.
now the real questions: 1) Of you who have this camcorder and can connect to iMovie 8,9, or the current one HOW did you do it ?????? 2) anyone else can help me determine whether I should return it and if so WHAT should I get for under $800 , is a hard drive, takes a decent video and connects directly to iMovie .
I've read so many comments in so many forums that I am totally confused and discouraged by the differing opinions
HELP PLEASE
thanks
Sue

i went to that link and while it says compatible, when clicking the followup link, this camera is not listed:
" iMovie ’08, '09, and '11 and Sony HDR-CX11, HDRCX12, HDR-SR1 and HDR-SR7 cameras should work with AVCHD (high-definition) and MPEG-2 standard definition (SD) content when you follow these guidelines.
Products Affected
iMovie '08 (7.x), iMovie '11, iMovie '09
If the Sony HDR-CX11, HDRCX12, HDR-SR1, HDR-SR7 and HDR-SR12 cameras contain both HD (AVCHD) and SD (MPEG-2) content, iMovie ’08, '09, and '11 can import the SD (MPEG-2) content. However, to import the HD (AVCHD) content to an Intel-based Mac, you must first erase the SD (MPEG-2) content on the camera."
how wold I know IF the camera contains both HD and SD (the latter that has to be erased first ? It's an HD amera so why would it have SD content also ?

15+ year Sony Handycam - how to import to iMovie 05

I have boxes (about 30) of small 8mm video tapes I'd like to import into iMovie 05. (5.0.2 ) Apple sold me a Canopus digital video converter - I feed the camera into that, and the firewire into the computer. Follow numerous directions, but nothing happens! The computer recognizes the converter, says "camera cannected" and "camera playing" but no images, even when I manually push "play" on camera. Have to wait 4 days for a CarePlus appointment.
Any ideas? I'm anxious to start!

Hi Susan
Does Your Handycam work when You connect it to a standars TV-set ?
If so. You connect Your Canopus in the same way. Analog out on Your
Camera to the RCA in connectors or using the S-video connector.
Then the Canopus via the FW to Your Mac.
You can't control the camera from the Mac but has to put the Camera in
playback/VCR mode and press play (as when showing on the TV)
Now click on import if You got a picture. If not You probably has to
switch the Canopus to Analog-mode. Picture now ?
If not You should test each part so that Camera, Analog-wire, Canpus and
FW-wire really are OK.
If You just tested FinalCutExpress or pro on Your Computer there is a known
problem with this. Some files doesn't work together and import / export in
iMovie use to stop worknig.
Yours Bengt W

New SONY and can't upload to iMovie

I have had no trouble uploading from my old SONY (mini-DVD tape) onto iMovie HD, via a Firewire.
Then I buy a new SONY HD (HDR-SR10E) which has a hard drive and looks the business.
But now I can't load up the footage onto my MacBook Pro. There is no Firewire port on the SONY - the only connection seems to be a USB. When connected via USB, my Mac will not see any files to download. The disc that comes with the SONY does not load any software onto my Mac.
I've searched on the web, but no luck. At PC World they were no help.
Anyone know how to get my video from my new SONY camcorder onto my Mac? So frustrating. The SONY instruction manual is next to useless.

Hi
You might learn more here.
Tutorials:
iDVD 5: http://www.kenstone.net/fcphomepage/idvd_5stone.html
iLife6: http://www.apple.com/ilife/tutorials/
iMovie HD 6: http://manuals.info.apple.com/en/iMovieHD_6_GettingStarted.pdf
iLife08 and Mac OS X.5: http://www.apple.com/ilife/tutorials
iMovie08 and Mac OS X.5: http://www.apple.com/ilife/tutorials/#imovie
iDVD08 and Mac OS X.5: http://www.apple.com/ilife/tutorials/#idvd
Karsten Schluter : http://karsten.schluter.googlepages.com/im08tricks
Podcasts Apple
• Find Out How - Document Apple
• Find Out How - Mac OS X Apple
• Find Out How - Movies Apple
• Find Out How - Music Apple
• Find Out How - Photos Apple
• Find Out How - Web
Books:
David Pogue's books:
• iMovie HD the Missing Manual
*• iMovie 8 & iDVD The Missing Manual*
Yours Bengt W

Sony Bridge Can't Connect To Internet After Updating To Mountain Lion

I've tried multiple times now, to get Sony Bridge to check for updates, but every time I try, I get the following error:
Cannot Check For Updates (no internet connection)
I'm on a 2008 iMac, connecting with a Live With Walkman.
My Mac is online and the problem only occurred after updating the OS to Mountain Lion (10.8).
Thus far I've tried going into the user library, and have deleted the two Sony folders present in the Application Support folder, but to no success, I still get the same error.
I'm firing this up regularly to see when ICS is going to drop in Belgium, so I'd be keen to hear of any possibile solutions. Thanks.

Hello OneManLaptop
ML came out 3 days ago...There is as of right now no tested version of Bridge for MAc available for it.
You will need to wait for the Update of the application but right now we can't provide a ETA for it.
Sorry for the inconvenience that this may cause you.
Francis.

Sony Handycam DCR-SX65 iMovie compatible?

I can't log into the Sony site forums for some reason. One person I talked to on the site said that you can just not use the Sony software and just import into iMovie and be on your way. He also said I need to have at least iMovie 7.1.4. Mmmm my one year old iMac has 6.0.3.
Anyone confirm that the handycam can import directly to iMovie? This camcorder thing is driving me nuts. Way too many brands/formats to deal with.
Do I need to buy the iLife software to get the latest version?
Thank you.

You can now just buy iMovie itself online from the Mac App store. But that camera records into MPEG2 format and I don't think that will import directly into iMovie without converting it or first purchasing the QuickTime MPEG-2 Playback Component. Once that's downloaded, I think your video should import into iMovie '11.

My ipad does not appear in itunes. I am OS 10.6, itunes is up to date, I have restarted computer and ipad and switched usb sockets. Dont know if its related, but I can no longer see my sony handycam in imovies too.

My brand new iPad 2 does not appear in iTunes. I am OS 10.6, iTunes is up to date, I have restarted computer and iPad and switched usb sockets. Don't know if its related, but I can no longer see my Sony Handycam in iMovies too.

What content are you wanting to copy of the iPad ? You should be able to copy off anything that you've purchased from Apple (films, music, ibooks, apps etc) by connecting the iPad to your computer's iTunes and doing File > Transfer Purchases. If you want to copy off music copied from your own CDs or purchased from other sites then you will need to find a program for your computer that can copy them off – iTunes won't copy them off.
For photos taken with the iPad, copied to it via the camera connection kit or saved from emails/websites then you should be able to copy them off via the Windows camera wizard.
For photos that were originally synced from a computer you will need a third-party app such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.
Content in third-party apps (documents and files etc) then how you copy that content off will depend upon what the apps that they are in support e.g.either via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc.

Problems connecting Sony HandyCam in iMovie

I'm running a MacBook Pro 10.6.8 and trying to import movies from my Sony HandyCam HC-52 via the firewire port in iMovie. I have the camera set to playback/edit as required, but the camera never shows up in the "import" window. I'm running a brand new firewire cable, but the only camera that iMovie recognizes is the built-in Web cam. Why won't the HandyCam show up under "Import"?

Hi
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

How can I connect a Sony DCR-PC110 video camera with iMovie and import my videos?

How can I connect my Sony video camera DCR-PC110 with iMovie in order to import my old videos?

Hi
This Camera has three types of ports.
- Analog-out
- USB
- I.Link = FireWire = IEEE1394 = Digital in/out = DV-terminal
And Your Camera only can send Photos via the USB-connection - NO VIDEO.
So You Must get a FireWire Cable and eventually a ThunderBolt/FireWire converter Cable to get Import to work.
There are no real way around this.
Yours Bengt W

Trying to import videos from my sony handycam imovie connects but nothing happens

Trying to import videos from my sony handycam. imovie searches and then nothing. I was able to import yesterday. SPoke to Apple Tech he said I just need to wait it out, have been waiting 3 hours?????

Trying to import videos from my sony handycam. imovie searches and then nothing. I was able to import yesterday. SPoke to Apple Tech he said I just need to wait it out, have been waiting 3 hours?????

How do I get the Movies off my new Sony Handycam using iMovie?

WOW! I didn’t think that this would be such an issue!
So, I purchase a new Sony Handycam DCR-SR42 with a 30 GB
Hard Drive in it. I ask the sales person “Is this camera compatible
with my G5 Mac?” He says, it sure is! I take it home record the kids
around the house, and my daughter’s ballet recidal. COOL!
Then I go and try and downlaod the movies to my Mac. I come to
find out that the 2 cds that came with the camera are pretty worthless!
Sony states in one of the bullet points in the instruction manuel
that the software on the cd will not work on a Macintosh computer.
So, I figured, NO big deal, I will be using iMovie! Unfortunately
iMovie does not recognize the camera when I hook it up, because
it can only hook up using a USB connection. It doesn’t even offer
a Firewire connection, and iMovie ONLY recognizes Firewire.
I then find on one of the cds, a PDF of the Handycam Handbook.
It states in the PDF, that Mac users need to open the disk icon
on the desk top for the camera, and copy the files from the camera
to my hard drive. So I follow the steps and do this. Then I go to
open one of the files using Qucktime, and I get an error message
stating that Quicktime cannot open the file because it could not
parse it -2048!?!?!
Next, I go to the Apple web site to see if I can find anything to
resolve all this. I find an article “iMovie does not work with muxed
MPEG-1 and MPEG-2 clips” In the article it states that if the files
are MPEG2 Muxed files, iMovie can not support them!
I come to find out that the files are MPEG2 Muxed files. It seems
that the newer camcorders are using this format, because the files
are heavily compressed to allow the camera to cram more data
on the hard disk. The problem is you need some kind of software
to decompress these files in order to use them, and Sony doesn’t
include it for the Mac!
After more research I find - QuickTime MPEG-2 Playback on the
Apple web site. I purchase it for $19.99 from the site hoping this
will be the answer. Nope! It allowed me to open the movies in
QuickTime, and copy them into iMovie but they are only the
video portion. They have NO audio!
Anyone else run into this whole pile of BS?!?!!? If so, were you
able to figure out a work around? Or, are you stuck with a cool
camera full of movies, with NO way of getting them off with
sound? Well. unless you find someone with a PC that has
a DVD burner in it! Man, that thought scares the ---- out of me!
°Jeff Camp
camper
G5 Mac OS X (10.3.9)

Get a nice Sony miniDV camcorder. It is not too expensive; it is small and easy to carry around to shoot your video. Most importantly, it will be instantly compatible with iMovie. You don't have to install any software, just connect it via FireWire (Sony calls this iLink) and you are good to go!
I have had several Sonys and love them. You don't need one with fancy editing capabilities because you will edit your movies in iMovie. Just be sure that it has AV In and Out so you can import and export back to the camcorder.
My current version is the small DCR HC-26. There are newer versions of that HC-30something and 40something. Look at the specs on Sony's website
Some of them require the use of a dock to import and export. I am not really fond of that feature. I like just connecting directly to the camera.

Sony Handycam DCR-HC26 not recognized by iMovie'08

System: iMac PPC G5, 2GB DDR SRAM, running 10.5.8
iMovie: '80 7.1.4 (585)
Camera: Sony Handycam DCR-HC2, plugged in (battery in too), in Play/Edit mode (not record mode)
Firewire: 4-6pin, tried 2 cables.
Alert message: "No camera connected. To import video please connect a camera."
Camera on/Firewire in before starting iMovie; also tried restarting with Firewire already attached, no joy.
I DID successfully import video from this camera to another mac about two years ago -- it wouldn't recognize it at first, but I bought a new cable and that took care of it. This time I used the "old" (new last time; gold connections) AND bought a new one. Nothing doing.
Anyone have any help to offer? If I have the time I'll try to dust off the (home) machine that I used a few years ago (not sure which iMovie that was) and see if that works...
Thanks in advance!

Hej Sixten
May be You find help here.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

No connection with FW - Sony Handycam to MBP

I just connected my old Sony Handycam to my new Macbook pro i7, but it doesn´t seem to detect the camera. Doesn´t matter if I use iMovie, QT, or Final Cut Express. I have a cable with iDV connection on one end and FireWire 800 on the other end. In FCE it says "Unable to locate the following external devices: Apple FireWire Pal (720 x 576)". I am using Pal since I am in Europe. In system profiler I get the message "Warning: Unable to list FireWire devices"
The same camera used to work fine with both Final Cut Express and iMovie with a FireWire 400 to iDV cable on my old iMac G5.
I have already tried restarting the MBP, turning the camera off and on, unplugged the cable plugged it in again etc.
I can not find any driver online for this camera, it is a Sony Handycam DCR-TRV33E.
Any ideas on how to make this work?

The connection of cameras designed to be connected via 4 pin to 6 pin (fw400) cables seems to be increasingly problematic when switching to the 4pin to 9 pin (fw800) cables. The usual troubleshooting steps apply. Try a different cable, try a different camera and/or try a different computer.
Can you take it to an Apple store and try it there?
x

Help Connecting Older Sony HandyCam to MacBook Pro

I have an older Sony HandyCam which I have not used in years. Trying to connect to iMove 6.0.3 and can not get the camcorder to mount so I can import. Using USB connection since my MacBook Pro does not have firewire. Help?

Hi
What Sony HandyCam do You have ?
Is it a miniDV tape Camera - if so it only can connect via FireWire.
What MacBook Pro - Do You have ? - Never seen one without FireWire - but on later models there are only a FireWire 800 connector.
MacBook Air and some MacBooks don't have any FW-connector - but MB Pro used to have it as far as I know.
If it has a FW800 - connector - then You need a FW 4-pin to FW-800 Cable - the FW400-FW800 adapter is not my favorite solution.
Yours Bengt W

IMovie doesn't love a Sony Handycam (DCR-SX)

I have a MacBook Pro and have been successfully importing video from my Canon LS-someting and editing for about 2 years now. I recently went to Italy with the family and left the video camera charging on my desk. So in Rome I bought the first camera I could find, a Sony Handycam. Now it simply doesn't work. I have 3 problems. First, I left the camera at home charging. Second, I had to pay for a second camera. Third, I now have 2 hours of random video that my wife thinks I should just burn to a DVD using someone else's "real" computer and I can barely sit through the 10-minute infomertials I produce for our family, much less 2 hours of me yelling, "Smile, DAMNIT!" at my kids. Can you help?
Here's what I have:
MacBook Pro '09
Mac OS X 10.6.8
iLife '11 (iMovie 9.0.4 1604)
Sony Handycam DCR-SX45E
It says "Works with iMovie" on the box. The Sony Website says it is MPEG-2 Format.
The Apple website has it on the list of compatible camcorders:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
Using inputs for the drop-downs on the Apple webpage: Camcorder, Sony, MPEG-2, Memory, PAL, GO!
By all accounts, these two should do alright together.
I'm no expert as I've only had a Mac for about 2 years now. But I borrowed a waterproof camera from a buddy once and had no issues when I switched cameras. The Canon pulls up and offers to do the work for you. The waterproof camera was a bit of work, but I figured out how to import.
For this I have tried to trick iMovie into importing the footage by turning on the "USB COnnect". No success despite FInder visibly showing that the camera is connected. I went through File-->Import from Camera and when I get to the files, they are grayed out. I selected the folder containing them and let it run for an hour or so and hoped that Apple would do it's magic. Obviously no luck. I then inserted the memory card into my laptop and tried to manually search it in File-->Import and...same thing. Nothing..... I finally went in and copied them to a folder on the desk top and tried to import from there with no luck.
Can you please enlighten me? Both products (Apple and Sony) claim that they are compatible. If so, where am I going wrong. I'd hate to have to buy 3rd party software to fix translate this....
Thanks!

Dear AppleMan1958,
Thanks for providing that link! I just got the same camera. My question is, should I install the PMB software from the disk provided with the computer on my Mac in order to import videos from the camcorder to iMovie? Thanks much!

My Sony Handycam can't connect to iMovie 9.0.9

Similar Messages

Maybe you are looking for