My Sony Handycam doesn't mount anymore.

I think it's for the first time I want to work with iMovie 10.0.6 since I updated to Yosemite. The Handycam DCR-PC9E doesn't show up anywhere.
I always connected the cam with usb. Is it possible that I now need to use the thunderbolt connection? (At the moment I don't have the right cable for that.)
Thanks!

Hello Rene van den Abeelen,
Thanks for the question. After reviewing your post, it sounds like iMovie is not recognizing the camera. I would recommend that you read this article, it may be able to help the issue.
iMovie '11: If iMovie doesn’t recognize your camcorder
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Similar Messages

USB External HD doesn't mount anymore

Hi,
MBP, Leopard 10.5.7, USB HD Imation Appolo.
The USB drive is partitioned into 3: an image of Leopard installation (10 GB), a FAT 32 partition for PC use (10 GB) and Time Machine (200 GB).
Since yesterday, the only partition that mounts on OS X is the PC one... I don't get it...
Thanks

Does the HDD and volumes appear in Disk utility?

Sony Handycam DCR-TRV260 not showing up on desktop anymore

I posted this same question a couple of weeks ago but got answers like "is there tape in the camera?" Duh!
Got a Sony Handycam DCR-TRV260, used to work and show up on the desktop and now it doesn't. It does show up as connected on System Profiler under Firewire bus.
I downloaded QT 6 MPEG-2 PLAYBACK-MAC OS X-INT from Apple downloads for $19.95 as recommended when I searched the discussions here but I can't get it to start up!
Help me and my handycam! I just want to download videos to my hard drive - is that asking too much?

My Time Capsule shows up on my drive but I can't do anything with it. This is in Snow Leopard even after today's 10.6.2 update.
All I get is this message "The alias “TIME CAPSULE” can’t be opened because the original item can’t be found."
I then have three options - Delete Alias - which gives me "The item “TIME CAPSULE” can’t be moved to the Trash because it can’t be deleted."
Or - Fix Alias - which gives me a chance to navigate to the TC but it's all greyed out.
Or - Okay - which it plainly isn't!
I really hoped Apple would fix this. I have another Mac running Leopard and it mounts Time Capsule on my desktop and all it's files are accessible just like any other external drive - exactly how I want it!
cheers
rich

Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?

Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?

TarahCurrie Sep 10, 2014 3:48 PM
Restore From Time Machine Backup
Reinstall OS X
Get Help Online
Disk Utility
MacBook Pro, Mac OS X (10.5.8)
You are running 10.5.8
Did you try booting off your Install disk holding the c key down. From here you can get to the drop down menu just a few clicks in (you are not going to install) and run the Disk Utility>Repair Disk. See if it will let you do this.

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

IMovie doesn't love a Sony Handycam (DCR-SX)

I have a MacBook Pro and have been successfully importing video from my Canon LS-someting and editing for about 2 years now. I recently went to Italy with the family and left the video camera charging on my desk. So in Rome I bought the first camera I could find, a Sony Handycam. Now it simply doesn't work. I have 3 problems. First, I left the camera at home charging. Second, I had to pay for a second camera. Third, I now have 2 hours of random video that my wife thinks I should just burn to a DVD using someone else's "real" computer and I can barely sit through the 10-minute infomertials I produce for our family, much less 2 hours of me yelling, "Smile, DAMNIT!" at my kids. Can you help?
Here's what I have:
MacBook Pro '09
Mac OS X 10.6.8
iLife '11 (iMovie 9.0.4 1604)
Sony Handycam DCR-SX45E
It says "Works with iMovie" on the box. The Sony Website says it is MPEG-2 Format.
The Apple website has it on the list of compatible camcorders:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
Using inputs for the drop-downs on the Apple webpage: Camcorder, Sony, MPEG-2, Memory, PAL, GO!
By all accounts, these two should do alright together.
I'm no expert as I've only had a Mac for about 2 years now. But I borrowed a waterproof camera from a buddy once and had no issues when I switched cameras. The Canon pulls up and offers to do the work for you. The waterproof camera was a bit of work, but I figured out how to import.
For this I have tried to trick iMovie into importing the footage by turning on the "USB COnnect". No success despite FInder visibly showing that the camera is connected. I went through File-->Import from Camera and when I get to the files, they are grayed out. I selected the folder containing them and let it run for an hour or so and hoped that Apple would do it's magic. Obviously no luck. I then inserted the memory card into my laptop and tried to manually search it in File-->Import and...same thing. Nothing..... I finally went in and copied them to a folder on the desk top and tried to import from there with no luck.
Can you please enlighten me? Both products (Apple and Sony) claim that they are compatible. If so, where am I going wrong. I'd hate to have to buy 3rd party software to fix translate this....
Thanks!

Dear AppleMan1958,
Thanks for providing that link! I just got the same camera. My question is, should I install the PMB software from the disk provided with the computer on my Mac in order to import videos from the camcorder to iMovie? Thanks much!

Since installation of Mountain Lion the latest version of sony Image Data Converter doesn't work anymore. How can I tackle this problem?

Since installation of Mountain Lion (10.8.2) the latest version of Sony Image Data Converter (Ver. 4.6) doesn't work anymore. How can I solve this problem?

HI,
I have seen this with AIM Logins that use the SSL Server and not the original server that was non SSL
Since iChat 6 the server name has also changed as has the Login port (Although we were suggesting using the port 443).
The AIM SSL server "Falls Over" more frequently than the other server.
Also iChat/Messages reconnects automatically to the NON SSL server but not to the SSL one (It is a security risk)
You had to manually Log out by Untick "Enable this Account" then Log back in again.
I have not seen this happen in Jabber accounts but I don't use my computer the same way you do.
Jabber Servers tend to either use SSL or Not and can rarely login if you change to not using SLL.
It also seems a bit strange that Disabling the account, as you phrase it, and re-enabling does not work.
For Googletalk Logins try logging out then changing the port to 443 (Googletalk allows this port as well as 5223)
Also check the Keychain (Applications/Utilities > Keychain Access) and see if there is an issue with any Gmail or Googletalk certificate.
10:35 PM Wednesday; November 14, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My mac doesn't support pmb software for sony handycam what should i do?

my mac doesn't support pmb software for sony handycam what should i do?

Provide the model number please. And eww-PMB stands for "Picture Motion Browser"

Lost Cause? Mini Mac + Sony Handycam???

Hello -
Im new to the Mac world. I just got a Mini Mac for x-mas, and I have a Sony Handycam DCR-DVD403. It seems that they arent compatible. The camcorder takes movies and pictures, which I was hoping to be able to use with my Mini. It does have a USB port, but nothing seems to happen when I try to connect.... I was thinking the first step would be to get a firewire adapter to see...Im at a loss, is there no way to make the two work... The mini dvd that goes in the camcorder, of course doesnt work with the Mac MINI....
Any advice would be much appreciated.
Thanks!

Welcome to the Apple Discussions!
iMovie, like all DV editing programs (including Final Cut Express and even Final Cut Pro), require you to use FireWire to connect. This is part of the "DV" standard. You can't connect a DV camera via USB because then it wouldn't actually be "DV". I looked around for a couple of minutes, you'd think "what ports does the DCR-DVD403 have?" would be an easy question to answer. But although Amazon.com offers an "iLink" (Sony's name for FireWire) 4-pin to 6-pin cable as an accessory, I couldn't find anywhere that said that camcorder actually HAD an iLink port. If it does, you may be able to use a 4-pin to 6-pin FireWire cable. However, cnet.com's review said this camcorder simply wasn't compatible at all with a Mac.
Does it mount like a hard drive when you connect it with USB? If not, then it doesn't support the USB Mass Storage standard. So, you won't be able to see it with iPhoto to download the still pictures either.
-Doug

Saving Video from a Sony Handycam HDD - I'm stuck in iMovie ****!

We foolishly bought a Sony Handycam HDD video camera last year, thinking we could save our movies to DVD using the computer.
I can do it using the laptop we got my daughter for Christmas, but this isn't really feasible. My G4 has iMovie 3.0.3. and even though I recently upgraded to a 2Ghz processor, I still can't install the iMovie I bought with iLife '08 2 years ago.
I need to be able to save files from my Sony handycam to my computer and burn DVDs. Or even if I could just burn them without saving, that would be fine.
I have heard that I need StreamClip from Apple and I see that I need to buy Apple MPEG-2 converter first and then I see in the feedback category for that product, everyone who gave it bad marks was trying to do what I'm trying to do. Then I read somebody recommended Quicktime Pro...
I'm completely confused..and frustrated!!!!
Is there a version of iMovie that will work for me even though I just have a plain old 2Ghz processor?
Would Quicktime Pro or some other software do it for me? I don't mind paying $30 for some software that I'm only going to use for saving movies from camera to DVD, but I'd rather upgrade iMovie if that was possible.
thank you.
(I'll come in off the ledge now...)

Hey. This is a really good question because I too have run into video problems with mine. After a couple of years I couldn't stand it anymore so I sprung for a MacBook Pro for myself this past Christmas. When I say video problems I mean I can't watch a DVD, a video on the net, etc. It's a pain.
But I still haven't given up on it. Currently it's just used for storage. Did that processor upgrade make any difference for you? I've been looking into that upgrade along with an upgrade to Leopard on the Quicksilver to see if it can handle the video.
We bought a Panasonic video recorder and have a G5 (pardon me but I don't know the processor speed). Even that computer wouldn't recognize the video files stored on the recorder and refused to import them. I called Panasonic and they explained I needed iLife '09. (Currently on the G5 there is '08 and it is running Tiger.)
What you might want to do is a couple of simple upgrades. First the OS to Leopard and then upgrade your iLife to '09. I can say that the camcorder works like it should with iMovie '09 just like the rep at Panasonic said it would.
Hope this helps.
Frank

Time Machine Just Doesn't Work Anymore

I was a happy Time Machine (with Time Capsule) user for months. But it just doesn't work anymore. It takes longer than an hour to do every hourly backup so it is backing up 24 hours a day. It finds hundreds of thousands of files changed every hour and tries to back them up. Finders says only tens of files have been modified all of today. I have tried rebuilding my spotlight indexes, repairing my Time Capsule with Disk Utility and starting over with a brand new backup. But it just backs up hundreds of thousands of files every hour. So I am turning off Time capsule since it is clearly broken. If anyone has any suggestions at all I would welcome them.

Marcia,
Consider the following, it might give you some ideas:
Time Machine performs backups at the file level. If a single bit in a large file is changed, the WHOLE file is backed up again. This is a problem for programs that save data to monolithic virtual disk files that are modified frequently. These include Parallels, VMware Fusion, Aperture vaults, or the databases that Entourage and Thunderbird create. These should be excluded from backup using the Time Machine Preference Exclusion list. You will, however, need to backup these files manually to another external disk.
One poster observed regarding Photoshop: “If you find yourself working with large files, you may discover that TM is suddenly backing up your scratch disk's temp files. This is useless, find out how to exclude these (I'm not actually sure here). Alternatively, turn off TM whilst you work in Photoshop.” (http://discussions.apple.com/thread.jspa?threadID=1209412)
If you do a lot of movie editing, unless these files are excluded, expect Time Machine to treat revised versions of a single movie as entirely new files.
If you frequently download software or video files that you only expect to keep for a short time, consider excluding the folder these are stored in from Time Machine backups.
If you have recently created a new disk image or burned a DVD, Time Machine will target these files for backup unless they are deleted or excluded from backup.
Installing new software, upgrading existing software, or updating Mac OS X system software can created major changes in the structure of your directories. Time Machine will backup every file that has changed since the installation.
Files or folders that are simply moved or renamed are counted as NEW files or folders. If you rename any file or folder, Time Machine will back up the ENTIRE file or folder again no matter how big or small it is.
George Schreyer describes this behavior: “If you should want to do some massive rearrangement of your disk, Time Machine will interpret the rearranged files as new files and back them up again in their new locations. Just renaming a folder will cause this to happen. This is OK if you've got lots of room on your backup disk. Eventually, Time Machine will thin those backups and the space consumed will be recovered. However, if you really want recover the space in the backup volume immediately, you can. To do this, bring a Finder window to the front and then click the Time Machine icon on the dock. This will activate the Time Machine user interface. Navigate back in time to where the old stuff exists and select it. Then pull down the "action" menu (the gear thing) and select "delete all backups" and the older stuff vanishes.” (http://www.girr.org/mac_stuff/backups.html)
*TechTool Pro Directory Protection*
This disk utility feature creates backup copies of your system directories. Obviously these directories are changing all the time. So, depending on how it is configured, these backup files will be changing as well which is interpreted by Time Machine as new data to backup. Excluding the folder these backups are stored in will eliminate this effect.
*Backups WAY Too Large*
If an initial full backup or subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups.
This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude itself by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Prefs “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
*FileVault / Boot Camp / iDisk Syncing*
Note: Leopard has changed the way it deals with FileVault disk images, so it is not necessary to exclude your Home folder if you have FileVault activated. Additionally, Time Machine ignores Boot Camp partitions as the manner in which they are formatted is incompatible. Finally, if you have your iDisk Synced to your desktop, it is not necessary to exclude the disk image file it creates as that has been changed to a sparsebundle as well in Leopard.
Let us know if any of this helps.
Cheers!

Sony Handycam HDR no longer recognized

I have a Sony HDR HDD camcorder that, for quite a while now, had no issues with its 4pin DV-USB cable (that came with it) connection to my Mac Pro being recognized by iMovie 9. I haven't made a video in a couple of months, but recently, I filmed about 3 hours worth of wedding footage, connected the camcorder to the Mac as before, iPhoto recognized it instantly (and auto-launched as always) but iMovie refuses to believe the camcorder exists.
I've been told that no stores sell Sony's proprietary DV cables for their products (which makes since as universality would only benefit consumers and not businesses). Additionally, some go so far as to say Sony doesn't even make such a firewire cable to handle an issue wherein iMovie 9 now requires a firewire connection—or so I've heard.
1) Has iMovie 9 been nerfed in some update that now requires camcorders to be connected via firewire now.
2) If so, is there some method to import the videos either directly to the finder or into iMovie without the need for a potentially non-existent DV-Firewire cable?
PS: The connection is no longer recognized on my iMac as well.

Well… I opened Image Capture with the camcorder plugged in and modified the "Connecting this camera opens…" menu to be iMovie. Unfortunately, all that resulted in was opening iMovie upon connecting the camera. iMovie still refuses to acknowledge that the camcorder is connected.
Related: This is my work machine, wherein we do moderate amounts of video capture and I am using iMovie '08 7.1.4 on OS X 10.6.8. I'm really disappointed in Apple having altered something within iMovie (or the OS) that prevents the camcorder from being recognized. The last import I had performed was March 25, 2011.
More info regarding the camcorder: Sony Handycam HDR-SR11 60GB HDD. I am going to try to burn straight to DVD and then try and import from that, but that is, of course, not ideal. I'd much prefer to import into iMovie directly from the camera as I used to be able to do.
EDIT: I'm guessing you need to install the Picture Motion Browser software for the Disc-Burn feature of the camcorder to work. And that is only available on a Windows-based PC.

How do I get the Movies off my new Sony Handycam using iMovie?

WOW! I didn’t think that this would be such an issue!
So, I purchase a new Sony Handycam DCR-SR42 with a 30 GB
Hard Drive in it. I ask the sales person “Is this camera compatible
with my G5 Mac?” He says, it sure is! I take it home record the kids
around the house, and my daughter’s ballet recidal. COOL!
Then I go and try and downlaod the movies to my Mac. I come to
find out that the 2 cds that came with the camera are pretty worthless!
Sony states in one of the bullet points in the instruction manuel
that the software on the cd will not work on a Macintosh computer.
So, I figured, NO big deal, I will be using iMovie! Unfortunately
iMovie does not recognize the camera when I hook it up, because
it can only hook up using a USB connection. It doesn’t even offer
a Firewire connection, and iMovie ONLY recognizes Firewire.
I then find on one of the cds, a PDF of the Handycam Handbook.
It states in the PDF, that Mac users need to open the disk icon
on the desk top for the camera, and copy the files from the camera
to my hard drive. So I follow the steps and do this. Then I go to
open one of the files using Qucktime, and I get an error message
stating that Quicktime cannot open the file because it could not
parse it -2048!?!?!
Next, I go to the Apple web site to see if I can find anything to
resolve all this. I find an article “iMovie does not work with muxed
MPEG-1 and MPEG-2 clips” In the article it states that if the files
are MPEG2 Muxed files, iMovie can not support them!
I come to find out that the files are MPEG2 Muxed files. It seems
that the newer camcorders are using this format, because the files
are heavily compressed to allow the camera to cram more data
on the hard disk. The problem is you need some kind of software
to decompress these files in order to use them, and Sony doesn’t
include it for the Mac!
After more research I find - QuickTime MPEG-2 Playback on the
Apple web site. I purchase it for $19.99 from the site hoping this
will be the answer. Nope! It allowed me to open the movies in
QuickTime, and copy them into iMovie but they are only the
video portion. They have NO audio!
Anyone else run into this whole pile of BS?!?!!? If so, were you
able to figure out a work around? Or, are you stuck with a cool
camera full of movies, with NO way of getting them off with
sound? Well. unless you find someone with a PC that has
a DVD burner in it! Man, that thought scares the ---- out of me!
°Jeff Camp
camper
G5 Mac OS X (10.3.9)

Get a nice Sony miniDV camcorder. It is not too expensive; it is small and easy to carry around to shoot your video. Most importantly, it will be instantly compatible with iMovie. You don't have to install any software, just connect it via FireWire (Sony calls this iLink) and you are good to go!
I have had several Sonys and love them. You don't need one with fancy editing capabilities because you will edit your movies in iMovie. Just be sure that it has AV In and Out so you can import and export back to the camcorder.
My current version is the small DCR HC-26. There are newer versions of that HC-30something and 40something. Look at the specs on Sony's website
Some of them require the use of a dock to import and export. I am not really fond of that feature. I like just connecting directly to the camera.

Sony Handycam DCR-HC26 not recognized by iMovie'08

System: iMac PPC G5, 2GB DDR SRAM, running 10.5.8
iMovie: '80 7.1.4 (585)
Camera: Sony Handycam DCR-HC2, plugged in (battery in too), in Play/Edit mode (not record mode)
Firewire: 4-6pin, tried 2 cables.
Alert message: "No camera connected. To import video please connect a camera."
Camera on/Firewire in before starting iMovie; also tried restarting with Firewire already attached, no joy.
I DID successfully import video from this camera to another mac about two years ago -- it wouldn't recognize it at first, but I bought a new cable and that took care of it. This time I used the "old" (new last time; gold connections) AND bought a new one. Nothing doing.
Anyone have any help to offer? If I have the time I'll try to dust off the (home) machine that I used a few years ago (not sure which iMovie that was) and see if that works...
Thanks in advance!

Hej Sixten
May be You find help here.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

How do I get a small (Sony handycam) DVD out? from my iMac

In order to see if the iMac would import Sony Handycam DVD (small size) I put in such a small DVD... it's still there, it not recognized, and it will not come out. What can I do?
/Lars

This happened to a family members macbookpro. A mini-cd inserted, couldn't be mounted or ejected by the drive.
I cut a rectangle from a cereal box about two inches wide and 6 inches long. About an inch and half from one end in the middle I cut a notch and bent it down a little.
I................I
I................I
I.....I__I.....I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I_________I
I then inserted it slowly into the drive notch down and slowly pulled out. I did this few times and caught the mini-cd and removed it. The drive has worked flawlessly for several years
A few days after this happened I was in BestBuy and an Apple rep was there displaying new Apple products. I asked him about it and he said they have a tool that vacuums it out.

My Sony Handycam doesn't mount anymore.

Similar Messages

Maybe you are looking for